Search results

I don't see a dedicated one. Pretty much all of us have generators

I have a low mile 4 door long bed 1999 F350 dually. It's a Powerstroke 7.3ltr with a 6 speed manual transmission, 4 wheel drive and a Dana70 limited slip rear axle. It works great for towing a 20' trailer and mini excavator (10,000lbs ). As i'm getting older my needs are changing. I would...

Looking at the Firepower FP-200 Mig weighs about 30lbs ESAB 3 year warranty I am retired and have gone from being a full time certified welder to hardly welding anything at all. My Last welder is a absolute mint Miller Millermatic 150. very low hours. Looks just like it came out of the box...

Seems like it should be good if its Curt. Should I try it?

Is there a way when the generator is running with a load to measure the load ? at the generator itself?

Underground wiring is all done. Generator is ready. How do you cover/store your outside generator? Protected from the weather yet easy to access for starting and service. Could use a little help on visioning this. Thanks!!!

Season 4 is almost here. Its going to be a exciting evening with lots to see.

With all this crazy heat and cold weather this looks like a great upgrade. The good? The Bad? Thanks!!!

Trailer is a couple years old and the trailer deck needs some protection from the weather. What do you use to protect the wood surface from the weather but not leave a slippery painted top cote? Thanks in advance!!

I see mention of these pop up in forums sometimes How about someone (s) who has and uses one tell up your experience? We are remote and loose power more often than not during storms. I have 3 generators. Honda EU1000I. EU2000I and a 9500W dual fuel standing by for long outages when...

Going to try a Prime rib roast for Christmas dinner. Has anyone used their Instant Pot for this? What is your favorite cut of roast for this and how did you prepare it? How did you cook it? Thanks!!

What are the ingridients you like best for making your own dog food? looking for healthy stuff to add to dry kibble. Thanks in advance.

Going to pickup my Woodland Mills sawmill Wednesday. Looking to the future I need a source to purchase blades from. and Best all around blade to use? I am not interested in resharpening my own blades so I also would be interested in hearing about sending them out. Any good paces for this...

Choosing the right mower for the size of the mini-x Since there is little to no information here on mini-x flail mowers I thought I would add some information. My last post on help locating one came up flat. My excavator weighs in at a little over 6000lbs with the extended arm and added...

We have a lot of trees and the wind and rain supply a small amount of possible lumber to mill I'm not planning on selling for profit but will be doing some honey do projects. Any advice on what to look for or stay away from? cant seem to find any used ones.

Reading my daily rural stuff and I get yet another no ID phone call. I quit answering these a long time ago. They left no message. What is a good web site to put the phone number in and see who called? Tried searching Google and it comes back with tons of the "FREE" services that show nothing...

I have a chainsaw that leaks with the thin oil and would like a thick bar oil. Any good ones out there? Thanks

Need advice on what thickness would be needed for a front safety window on a mini-x polycarbonate or acrylic roughly 24" wide by 30" tall. Thanks!!

Does anyone know the weight of the 60" bucket for the KL130 loader. Just need the bucket weight only. Thanks!!

I have a E26C mini excavator. Along with the two lines on the boom for the thumb I have 2 smaller (about 1/2 the diameter) lines at the end of the boom. What are these for or... what can I use these for? Thanks in advance

I need to cut the opening to the garage 6" taller. That is the easy project as the building is plenty tall for this. The door track should be easy as well. How do I add 6" more to the 16' wide door itself? The panels are aluminum. Appreciate any ideas... Thanks!!

Its amazing that no grocery stores have yeast. This has been going on around here for a couple months. Any simple way to make some??

I have a 6000lb mini excavator and am looking for a brush cutter for it. Any help and advise will be greatly appreciated Whats best??? Thanks in advance

over 70 and fighting to see a weld like a lot of you. Never used a auto darkening helmet. Still old school. I'm sure (hoping) a auto darkening hood will help me start my welds where they are supposed to be. Dont do much welding anymore. Some stick, some wire feed. Looking for a reasonably...

My wife feeds the birds. probably 200 birds a day. When we go to town 65 miles away we buy around 300-500 lbs of seed. Any online places that ship at a great price?

Like some of us living the rural life I order stuff over the internet. Ebay, Amazon etc. And like some of us I have a Paypal account. I have received 2 (sofar) notices from Paypal of suspecious activity on my account. My account doesnt show activity so I did as Paypal requested I sent the...

We have a lot of small downed vine maple and assorted tree limbs. I have a Woodmaxx pto 3point chipper. Always used it on dry materials during summer. How well do these chippers work on wet wood? Is it even worth trying?

Getting my wife one for Christmas. She uses her crock pot all the time. Any great recipes?

I always see posts on what great deals everyone got after Black Friday is over. Post them early so we all can enjoy them! Thanks in advance

I see there is both throw away and refillable bottles available. Any advantage? Whats the best way to fill them?

You guys always come up with amazing ideas and comments so I thought I would ask first for the best. When we have power outages they usually last less than 1 day. but... We had a sub station go out that lasted over a week. During the outages we run a power cord under a open window with a towel...

I have been using a single bit 3 1/2lb 30" handle for years. It does a good job and I split mostly maple. I have seen the single bit that are a "hybrid" splitting maul shape. Looks like the sides come out more like a wedge. Are these actually better with the same weight? As I am a couple days...

Is it just me? Chromebook is great but finding pics and getting them to TBN or my email sucks. Any help here?

Is it just me or is there a spell check? Would be great if I could find it...

Ok.... I screwed up my last post. Posted as onion scapes So..... How do you use garlic scapes? My wife grinds them up in a bullet. Mixes in avacodo and onion. Great dip.

My wife spends a lot of time cleaning these. She uses a knife and had wire brushes them. How do you clean them?

I am looking at their 68" flail mowers. Leaning towards the medium duty or up to the HD. Anything you were disappointed in or ???? should I move on to another brand. THANKS!!!

Just starting to get into these. Any great advice? Cooking and best way to store over winter? THANKS!

Our Pressure Well Tank is inside a storage shed. What is your best way to keep yours from freezing? For the last couple years we have been using a small radiant heater in front of the tank pluged into a temperature controlled plug. Freezebuster FB3/TC3 Thermocube. Activates when surrounding...

My neighbor moved in last summer. Started a BNB managed lodge and now does not live on the property. We have had easement issues (previously discussed here) and not on the best of terms. While he was here we discussed if he knew wjere the property line was. He pointed out what the previous...

Living on the side of a mountain I often find myself stopping on a grade requiring using the pedal lock. Always feels like it positively locks and never had a problem. It does make you think though if you are working around it. Has the HST so I cant leave it in gear but shut off there is always...

My wife keeps replacing our outdoor thermometers. they all fail after a short time. anyone have one that seems accurate and has survived a few years? Thanks!!

I have two PTO shafts with the newer style quick release ring that slides back to attach to the tractor. I keep them clean and well oiled. It takes two hands to slide the ring back fully and that at best is just barely enough. The balls dont retract 100% It also takes another hand to grab the...

Have some posts to put in away from a water supply. What is the best pre mix sack concrete for this?

Might be rebuilding my gate. Was going to use two railroad ties as posts. We had a 12" diameter maple tree blow over during a storm ad was wondering if that would make a good gate post?

Looking into a solar gate opener with key pad. Do they need a gate lock? and why? Thanks

I bought this property 4 years ago. There is a easement allowed up our driveway and beyond to a cabin. The cabin just recently sold and the owners turned it into a rental, listed it on AirBNB. It now is relisted as a year around Lodge. I have gone from a car or two once in a while going by to...

Just checking to see. Maybe a few mods that you might have done? Just ordered several buckets and rake for mine.

I have searched for a specific mini excavator forum and non to be found. There seems to be a rapidly growing family of us tractor owners who also are adding minis to there herd. Most questions asked and answered in other general forums seem to be non brand only questions all of us owners might...

Doing clearing with a mini excavator requires a lot of chainsaw use as well. Looking for a great way too carry it on the excavator. usually I throw it in the bucket with the gas and oil. set everything on the ground when I am working.

Can anyone explain the different types of quick couplers and what fits what? is one better? and how to recognize what fits? thanks My New Holland E26C has a C&H and a 36" cleanout bucket was $1400.00 When I looked at Sanys they had a CWS quick coupler and a 36" cleanout bucket was $750.00

Just bought a New Holland E26C Would like to have a choice of a couple different size buckets and maybe a brush cutter or? Dealer prices are really high

Sold my tractor and have a PDF manual for a Long 360. 460. 510. Should have lots of relative information for close other models If interested PM me.

Does anyone know what the factory idle speed setting is? Mine is idling around 1200rpm. About twice what my Mitsubishi tractor and Ford Superduty speeds are

I broke my front axle housing on the LF. Can this be sucessfully welded back together? Any great advice on doing this? I have welded stick for years and was state certified but have never welded cast iron. Would also be interested in taking this to a expert in the Washington state area. Anyone...

I broke the LF axle housing on my tractor. Looking for a replacement axle housing, complete axle or parts tractor. Rebeldad1 in Washington State. May also be interested in a 2wd MT20d axle assembly. Has anyone converted their 4wd to 2wd so they didnt have to scrap the tractor? Also if you...

We have acres of those tall skinny maples that fall over all the time. Getting rid of the long skinny branches can be a time consuming nightmare. Since my wife is a pyro and loves her night time fires the 3" and up branches are firewood. She has given the ok on chipping the smaller stuff which...

I have a 2010 CK27HST. I bought a wix 33507 paper filter for it. Removed the old one and tried to push on the Wix but it wouldnt fit. Did the "finger test of the filter holes and the Wix filter inside diameter was smaller then the factory one. Went to the Wix site and looked up the diameter...

I have a CK27HST. I want to do a couple things under the dash and it would be a lot easier if the cover was off. Thought before I tackle this I would ask if anyone else has done it? I would guess all the models are similar.

My dash light is on all the time the key is on. Ebrake on or off. Does anyone know where the switch is located?

I am very interested in a 2010 CK27 with low hours. Is there anything I should look closely at? any faults in this tractor? Any PDF repair manuals available for this? What is a used one worth? Thanks in advance!

I got just purchased two JD mowers. I have two places to leave them to maintain some pasture grass and roads. So.... I am sure I am going to become a JD mechanic to keep these up.:) I would like to have service and repair manuals as well as parts break downs to carry with me. Where is the best...

Would like to do some service on a used brush cutter. Could use a manual or parts breakdown PDF ok also Thanks

I am, probably beating a dead horse here... Have a hood broken in several places by the hinges. How to repair this so it is usable? A good source for new or used replacement?

some wear is ok. like to try one out. Let me know what you have.

Looking for a good 5' brush hog. Willing to travel a reasonable distance from Seattle or Randle. Pics and price and a phone number please Thanks

Looking to purchase a 30-36hp tractor. going tomorrow to look at a 336D. anything to watch out for? the good and bads? Thanks!

What model would be best in this HP? any help appreciated

Looking for any help on a Justamatic lift. Wiring, hydraulics, parts supplier, service and repair and how to operate. Thanks

Need help on a Justamatic lift. Wiring, hydraulics service and repair and how they work. Where parts come from? Thanks

OK... new to Gators. When in neutral it wont hardly push down hill? If I jack up the rear the Left side roll fine. The right side turns hard by hand. Is this normal? Any advice would be appreciated.

I have a Long 360 that has a hydraulic pump that mechanically runs off the front of the engine. It leaks.... Puts hydraulic fluid into the engine oil. How does the seal come out? and where do I find a new replacement seal? Thanks in advance for any help. So far the only solution is to...

I noticed the hydraulic oil low. checked the engine and the oil was at the top of the stick! The only thing I can see that is common to the two is the hydraulic pump mounted to the engine.Anyone have this happen before? the fix?

I am purchasing a Long 360 that the power steering doesnt work on. Can you tell me how it works and how to determine why it doesnt work? Thanks! Is this the best place to look for Long tractor information?

I have a chance to purchase a Ford Super Dextra. How good and reliable are they? This one is apart and not running. Are parts easily available? Is assembly information on it available? Thanks

I have some fir trees I am going to use for posts. Do I have to peel the posts before they go into the postholes?

I have a 6 foot 3 point AER-WAY aerator. Weight just under 900lbs. What is a fair (for both of us) rental price for this. There is absolutely none of these around here in Washington state.

Would like to buy these here locally. Does anyone know part numbers for the oil, fuel and air filter? Thanks

I checked my glow plugs with a meter. Key on in glow plug position there is no voltage. The wire from the glow plugs to the relay is ok. The other larger wire to the relay gets 12V with key on. I now have two small wires. One gets battery power to the relay with the key in glow plug position...

I just bought a Mitsubishi MT20D I want to put a three point on it and find out how to hook it all up so it works! I have a couple lower arms but they dont seem to hang right. Twisted? Also the tractor came with a hydraulic ram that fits on one of the lower arms.... how does this work? do i...

I just purchased a MT20D. The tractor has a couple small leaks and the pump is a little noisy turning the steering. Where do I check the fluid level for the steering and the 3point ? Where is the drain and What do I put in it? does it have a filter? Thanks