Search results

etrailer.com seems to have quality stuff at pretty good prices, I'm planning to get a set of aluminum ramps because I don't think my current ones will support a skid loader. https://www.etrailer.com/Car-Ramps/Stallion/288-07503.html

Very smooth and easy to use. Trailer is only a year old but much better than standard latch so far.

You don’t like it because it’s aluminum or because it’s not a deckover? I’m fine with equipment style, so the aluminum to steel comparison is what I’m concerned about. Have you noticed accelerated wear or other issues with the aluminum? Have the tie downs bent the stale pockets?

Is the trailer still working well for you? I'm considering switching because the Sure-Trac 10k lb trailer is about 500 lbs lighter than mine. Any opinions on the aluminum deck vs wood? Do you find it slippery?

If you're talking about third function, I bought this one for my KL130 loader. https://www.wrlonginc.com/vk12-vk20

Their website has a parts finder that I use a lot, should be able to find what you need.

Just needed longer bolts because the beam is wider. I went with Blue Ox because it has the shortest arms and the built in toolbox doesn’t leave a lot of usable length without modifications. I was a little concerned it would slide because it doesn’t have the face of the channel to grip but it...

I ended up with a Diamond C car hauler, they make it in a 7k and 10k, not the lightest but it comes standard with I beam crossmembers with 16” spacing which is rare in anything less than a 14k equipment trailer. I wanted to get the most universal trailer I could find, and when I was talking to...

The hole closer to the end might not work, but it's pretty easy to switch and see if it lifts higher or interferes with the telescopic release so I'd try that first. Can you post a picture of the left side? Does the left side lift link have more than one hole? It's the same part as the silver...

I have an older Kioti and the extendable 3PH arms are only for hooking up, they don't lock extended. When people say adjust 3PH arms they are likely referring to to adjustments where the lift links attach to the arms. The owner's manual doesn't appear to explain this, but I've attached a...

Yes, both truck and trailer are limited to 10k which means smaller CTL like a Bobcat T450 or T180. L47 would be the max for a TLB. Lots of reasonably priced 10k pound skid steers but buying a new truck and trailer isn’t in my budget.

I know it's been 10 years, but I'm looking to install this type of waterer and was wondering if anyone ended up using these and how they've been working. I have Nelsons and although they work fine, $25 of electricity for each one every month adds up fast.

Haven't determined that yet, but $30-40k is probably the range I'd be comfortable with. I'd be more inclined to pay more for a TLB that has more versatility and can replace my tractor. Based on my size restrictions I think I just need to come to terms with not being able to lift anything I...

For my uses a tractor or TLB is was more useful, but looks like with equal weight machines a skid steer will lift more. As others have said, there's no perfect machine for everything. My main problem is finding something that I can haul without buying a new truck and trailer, so it needs to...

Found some great info with a lot more detail on the L47 owners manual. Also seems like Kubotas breakout definition is similar to what jb1390 described because they have different specs for bucket rollback.

Thanks that real world info is helpful. My dads mill is limited to 36”, but sometimes he wants to cut 12 foot boards or finds something bigger diameter he takes to a place with a bigger mill. He said some logs have been too big to lift with a L47 on forks, which has similar specs to your...

What model skid steer and what model tractor? I used L47 for several reasons. My dad keeps his mill at a place with an L47 and he said it occasionally can't lift a log, so that is my starting point for capacity. From what I've read it's built stronger than a typical compact tractor. It's...

That’s helpful thanks. I guess a follow up question would be is there a recommended percentage of tipping load you should generally stay under? Is operating capacity based on durability or just an arbitrary percentage of tipping load?

Yes, I've seen your posts on the versahandler and these seem like a good option, but finding one that I can haul (<7,500 lbs) and at a reasonable used price is pretty hard.

But 2,848 is at max height, shouldn't it be able to lift much more closer to the ground, which is how most loaders' geometry work? I agree and will absolutely do this, but am trying to narrow down options first. Already leaning towards tractor because of this, but trying to find out how big of...

Then why doesn't the skid steer have much higher lifting specs? I understand they are built heavier for longevity and rougher use, but if they truly are stronger why doesn't that show up in the specs? Is it the inherent instability of the design? Looking at them doesn't really help someone...

I don't follow what you're saying. If both have the same breakout force how will the SSV crush the L47 when lifting something a few feet off the ground. I understand skid steers are built heavier, but I'm not talking about that.

I'm trying to compare loader specs and it's hard to do on paper. I don't have experience with skid steers so I'd like some perspective from those that do. Ignoring all other differences between tractors and skid steers, how do you determine which loader is stronger? ROC and tipping load are...

Yep, lots of their stuff is sold on Amazon, probably good for light use but too many reviews say it doesn’t hold up so I haven’t bought any of their stuff so far.

Looks like a log skidder, I’m looking to buy or build one too. https://www.amazon.com/RJ-Designs-XHD-Skidder-Deluxe/dp/B0825BYYF6

Doesn’t daedong own the kioti brand? Like GM and Chevy, it’s just a brand of a company so there isn’t really a practical distinction. Kind of like saying a corvette isn’t a Chevy, it’s a GM.

Not sure how it works right now, but back when my tractor was made in the early 2000s, Kioti made the tractor and Bobcat made the loaders and other misc. stuff. Doesn't really change that Bobcat is responsible (you can't take a Toyota BRZ to a Subaru dealer for warranty work), but thought I'd...

Sold

Great condition, nothing wrong with it. Cat 1 and 2 hook ups, with angle, tilt and offset adjustments. From what I could find online it weighs about 550 pounds. $1,100.

Fair enough, seems like a well made product. I'd suggest you also ask about the difference between standard and super duty, couldn't find anything on the website explaining it.

That will fit your tractor. If you're spending a premium on this brand why not pay $40 more and get the option for weights? https://heavyhitch.com/product/category-1-receiver-hitch-and-suitcase-weight-bracket-for-3-point-hitch/ If you're not using it to pull stumps I'd recommend a cheaper...

I ended up buying the top link from Agri supply. I’m happy with it, easy to adjust and works well with the euro quick attach arms.

If it uses a standard relay you could try this. I put one in an old Volvo and it worked great.

Prices are all over the place but that trade price seems fair. If you want to get the most I'd suggest selling the brush hog separately since it already has a belly mower. https://www.tractorhouse.com/listing/for-sale/211113011/2015-john-deere-1025r-less-than-40-hp-tractors...

Messicks in pa is a dealer but they will likely charge retail also.

That's my backup plan, I'll try one of the ones wit ha handle first.

Thanks. Interesting concept, I can't find it on Hydraulink's website either so probably discontinued.

I found it on the CNH parts website, but looks like Cat 2 and dimensions aren't listed. My tractor is Cat 1. It's also about $400 and some of the generic ones are $50 so I will probably try a cheaper one first.

I like that one, handle looks stronger than the ones I posted.

I'm looking for a better top link but don't have rear remotes. I currently have a standard one with a lock nut that needs threaded separately, which is double the work. I've found some with a handle that doubles as a lock, which seems like a good idea. Several variations on the design, but...

My x720 had a similar problem that was caused by rust from the fuel level housing clogging the fuel filter. Mine lost power after running for about an hour, and letting it cool down helped so I initially thought it was electronic or other heat related problem like lownslo, but when I pulled the...

How big are those tires? Maybe I’ll get smaller ones and not cut them.

My plan was to cut a 6 foot tire in half, then bury each half 1 foot deep. Lot less digging and easier to move, and my goats are small so 2 feet tall is plenty.

I have grinder, sawzall and oscillating tool, so hopefully one of those works.

I mentioned this in a follow-up post, that is why my replies explained that some of the initial brands were out. You seem to have read my replies, but skipped the details. I said equipment, not heavy equipment. I explained that I want to haul a car or equipment, as long as it is within the...

Yes from Fayette, very nice will go back if I need anything else. Powder coat seems pretty common so it was hard to avoid, we will see how it holds up.

It would be stupid not to care. I’m buying a new trailer with lots of manufacturer options, if there’s two that meet my needs why not get the one with the better finish and avoid hours of grinding and painting?

Thanks, it will be enough cutting I’ll try both options.

I want to cut a large (70in diameter) tractor tire in half (two half circles) for goat toys. What's the easiest way to do this? Angle grinder or sawzall? What type of blade? Something else? A demo saw would probably be fastest but I don't feel like renting one just for this.

I was quoted about $5/gallon including labor earlier this summer, but needed to buy $50 metal valve stems. I opted to fill myself with washer fluid, it was surprisingly easy.

Ended up with Diamond C. 3" I beam crossmembers on 16" centers and 6k lb axles for only $500 more than the others was the tie breaker. But also got toolbox, and d rings that were extras on the others. This one also has a somewhat unique frame with integrated tongue so deck is lower for easier...

So this is way more complicated than I expected. CAM is out, spoke to a very helpful factory rep that said car hauler shouldn't be used for equipment like mini ex or skid loader because weight would be too concentrated even if under limit. Buying a trailer that won't break is more important...

So CAM Superline uses "expoy primer polyurethane pain finish" on a car trailer that has features I want that is similarly priced to the Sure Trac. Seems like a pretty big brand that I've seen around, but no experience. Any opinions on CAM?

The short answer is yes, you need an adapter. ATI and WR Long make adapters, both are about $1k but worth it. Everything Attachments sells WR Long and you can probably get a discount if you buy the adapter and forks together...

Looking for a 10k lb car hauler with wood deck that will be stored outside. I’ve seen lightly used trailers with way more rust than I’d expect. Brands that Seem well built, are within budget and have features I want include Sure-Trac, Diamond C (20% more than others), Lamar. Won’t be used hard...

I think kioti still makes bobcat tractors, you can try there. When I was trying to buy new wheels and tires I found out tractors are a lot different than cars, almost every manufacturer uses different center bore or bolt pattern.

How heavy are your trailers? This would work for ones without a lot of tongue weight. https://www.palletforks.com/skid-steers/bucket-and-accessories/clamp-on-bucket-hitch-v2/192102.html Or you might be able to remove your bucket and just bolt this to your ssqa...

With a small tractor get the lightest one you can find. ATI appears to make a SSQA adapter for your loader, WR Long also makes SSQA adapters. WR Long also makes third function kits which you'll also need for the grapple. They have great customer service, I called a few times about both the...

It seems light, but after you consider the weight of the quick attach coupler (~100lbs), and forks (~200lbs), you've already removed 300lbs of capacity. And that's before calculating the reduction in capacity by moving that 1,500lbs from the pins to 24" past the fork frame which is probably 30"...

My tractor is about the same size and I went with Land Pride PFL1242, only 1,200 pound capacity but that’s more than your loader can lift 24 inches from the frame. Reasonable price at $800 earlier this summer and only 220 pounds. Everything Attachments makes a light 2,000 pound set but they’re...

I think you’d be fine with turf tires based on your described uses. R14s will leave marks on wet grass too. I switched to turfs and can drive anywhere without tearing up my yard. 4wd has been fine for me when I run out of traction, I have ag tires if I need them but haven’t yet.

Yes, discounts are pretty much gone right now. I’ve been buying some implements and as you mentioned no package deals and that’s even if you can find a dealer with more than one thing you want. I’ve had tough luck so I’ve had to buy from multiple places. A few dealers even said they could put me...

What does your owner's manual say? My CK also has a speed sticker on the left fender showing max speeds in all 3 ranges. Tractordata.com says you should be able to do 15.6mph or 25kph so it looks like yours is slower than normal. Are you running the engine at PTO speed? How are you testing...

I agree lifting the front wheels can help. I also put it in neutral and touch the HST forward and reverse, but not when pushing the 4wd lever. Both seem to help getting into and out of 4wd.

I've ordered from Aliexpress, which appears to be a sister site. Obviously took a while to arrive but otherwise a smooth transaction. I think it's like eBay, your experience depends on quality of the individual seller.

Sounds like you have a bigger question to ask first, whether you'd really be happier with a smaller tractor. If your implements will work with an LX you might want to price one out and get a trade or sale price for the L, you can probably downsize without paying anything out of pocket. It...

My tractor came with R1s and I bought turfs since I have to drive through my yard a lot and the difference is amazing, perfect choice for me. Turfs were great in snow for me and surprised the other person said they are worse than R1s because that wasn’t my experience and while researching my...

Either will work, easiest would probably be grading scraper(land plane) but that’s a more specialized implement so the others are more likely to be used for a subsequent project.

If you want to maximize lift capability, the Land Pride PFL1242 at 220lbs are probably the lightest you'll find. They're made specifically for tractors your size, but even if you upgrade to a bigger tractor you likely won't exceed their lift limit...

Exactly, just seemed odd my valve is P for pump when everywhere else I’ve seen P means power beyond.

To clarify, the T line is a hard line shown in the second picture. You can't see it in the first picture, it's not the line with hose clamps.

I bought the WL Long third function kit and am getting ready to install. Most of the videos and how-tos I've seen say the power beyond line is marked P or something similar. However, on my valve it appears that the power beyond is marked T, which I thought normally meant tank. The WR Long...

https://www.tractorhouse.com/listings/for-sale/land-pride/gs0548/farm-equipment Price seems fine, as others have suggested weight is very helpful for these so might want to consider something larger.

Mine works, but not well, only seems to hold speed when in low range, and won't hold full throttle. I did the adjustments in the service manual and everything seemed to be within spec so I'm not sure what to do next. I just don't think it's a well designed system. When you flip the lever you...

Yes, hydraulics would be nice but I don't have any rear remotes so cost of adding them and hydraulics will be more than having a light and heavy blade.

Thanks, yes I shortened the top link to get it to lift enough to transport. I'll keep using it while I look for another one so maybe I'll get more comfortable.

Understood, and I do want a blade that has side shields and skid shoes as an option which is why I bought the one I did. However, for me a tail wheel adds complication, cost and reduces maneuverability when a lighter blade will accomplish the same thing.

In my case there is. I don't care if it's useless for road grading since I will never use it for that. I tried turning the blade backwards and while it knocked down some high spots it didn't scrape anything. I'm just trying to give people a different perspective before they buy the heaviest...

I borrowed on old 7 foot blade that only angled, it was pretty light but worked well scraping the footing in the arena. So then I bought a Woods 7 footer last week and find it too heavy for my uses. Not only does it feel really heavy when transporting (manual says it’s 565lbs), it digs in too...

Was the 7 foot blade on your L3400 a good fit? Did you push snow or dirt? I think 8 feet is too big for me, but 7 is a harder to find size so want to be certain it's a good fit before I spend time searching.

Do you use it with your CK, you don't find it too wide? I was leaning towards 84" since 72 seemed a little small.

Thanks, there are actually 2 Kioti dealers closer to me and both have the 84" blade in the style of the Woods I posted in my first post, actually identical since Woods makes the Kioti blades, but they are only 300lbs and have a bolt adjustment for offset so I'm not sold on that yet.

Unfortunately they have a 4 month wait for all blades.

Thanks, appreciate the insight, I don’t want a blade that’s too small but I really don’t want one that’s too big. I just noticed that model and a little concerned about price but availability also seems to be an issue. Waiting for messicks to call me back with more info.

So how big is too big? My tractor is 3,000lb bare weight with a FEL and 30hp. I'd like a 7 footer to get outside my turf tires when angled, and again I'm not planning on heavy scraping. Is a 500lb 84" blade ok?

Central PA, right down the road from Messick's. They said 6 months to get a 7 foot Woods. Just called EA, both Deluxe and xTreme blades are 4 months wait. Unfortunately it looks like I'll just get something to start working now. Who knows, with the way things are I probably won't lose much...

I get the weight argument, but my intended uses are what I consider light (although plans always change). Also price is a consideration. My initial use is to strip an outdoor arena, I'm tilling as I go so it's loose sand/stone dust. My reason for wanting one with end plates and skid shoes is...

Thanks, yes that covers everything, just a little pricy. Now to make a decision.

Gordon, thanks appreciate the comparison. I think Woods is a little easier than Land Pride because you don't completely remove any bolts, you loosen two bolts and it slides on a track. More cumbersome than a pin, but I can probably live with it since it comes with the other options of skid...

Thanks, that's the kind of insight I'm looking for. After a little more research, it looks like the Dirt Dog/Rhino doesn't have end plates or skid shoes as options on the 50 series, does anyone know of a brand where I can get pin adjustments for everything and at least end plates? I guess I...

I'm considering a light/medium manually adjustable rear blade and I'd like input on offset adjustments. Land Pride and Woods have variations of slotted bolt adjustments on the moldboard for offset and tilt. I'm concerned about needing a wrench every time I want to make an adjustment and the...

I'm looking for a small 3 point sprayer for a couple 3 acre pastures and general yard use. Cropcare appears to be a local to me regional brand. Messicks sells Ag Spray, both have similar specs and price ($2,000). I'm looking for one with 50-60 gallons with a boom and gun. TSC has Fimco which...

Thanks, from looking at other chain driver tillers that oil weight seems typical. Couldn't find any zerks, the left side has the chain drive, right side has a circular cover bolted over a bearing packed with grease. Not sure if it's designed well or poorly, I guess I'll find out. Sticker says...

I inherited a CK30 and this tiller, but don't have any manuals for the tiller, nor could I find any info online. Does anyone know the grease points and oil specs? I don't see any grease fittings. Thanks.