Search results

Ford and GM and Elon forgot to calculate not enough electricity , 5 billion in the hole

I just bought a new to me car, going to flush it twice first

A Ai is a glorified bot, they been around for 30 years, ChatGPT is dangerous

You should suckup to mods or report threads, after modded you can **** down hill Mister LS MT240 , I build web sites, I can make one just for your toy tractor

I bet he put all types of oil in it or was hard on it, or ran it low on oil, lots of kids don't check oil and if your hard on a motor it will burn more oil, before next oil change gimmick

My brother is a boss For NB power in electronics and he use to test oil in transformers that take a transport to fill,(costs alot) they have to change after a while because no filter

Guess what, they used a filter

That was a joke, read thread again you might learn something

I made a thread once asking if i should pull off nipples on new tires because it might wear uneven behind the nipples, most said no and were wrong

We're only having a little debate, why is everyone closed minded

Don't forget to time your fuel pump Diesel drag racers only turn a screw, so much tec

Move along fanboy, adults talking

They don't know what they're talking about

Like I stated intel bought out all the bench sites to lie about Amd speeds, do your own bench marks or be a fanboy

I talked to a few guys on youtube about this and they were very interested, Like i said alot of people think oil is oil, Alot think example 5-30 any brand is ok but its not

Last site I left , was because noobs were posting in tec threads

Grammar nazi, I speak other languages, i'm sorry for your limited confusion, plus if you understand show some respect , go buy a intel computer

I said no derailing, let it go, Take your little Kioti CX2510 and go play in the mud

I made the same thread 20 years ago and got same response, bunch of fan boys with no clue what their talking about Like intel vs amd, Fanboys like intel because they have no clue intel bought out all benching sites and lied about amd speeds, I did my own bench marks and found it to be true...

Tec thread, derailing it will not be tolerated, let the big boys talk

Like i said, next oil change place the old oil on your fingers and try to snap them, if you got good oil you will see no difference

Infinity is a lie because 100% is a fixed number

Oil comes in many colors, recycled oil is darker

If you can't snap your fingers its not good oil, another noob

Thanks for sharing your input was very well explained

I do the same, look at fill cap, all i'm saying is sludge is created by mixing different oil weighs and brands not old oil, 15-40 diesel oil is very good oil, my dad would place it in his cars because a diesel works harder than a gas motor, higher compression, if you look on back it says you...

Your right... My dads last car had aluminum heads and block, at 500tho we took valve cover off to look and the aluminum walls were black like someone painted them but no sludge , but 0-30 oil shake it and its like water, id place atleast 5-30

The spines were stripped, Id need a new blower gear box, what would you of done, Its fine as it is

Should we start talking about best filters now?

yes filter works

The teacher in mechanics told this secret to my dad 50 years ago and he tried it and the teacher was right

Only if you ran your motors at full temp to get rid of condensation

The filter does its job

Over 500tho miles on 2 motor was a stroke of luck?

I said change filters in first post, look under cap and try again

Black oil is just as slippery as new oil, Anyways if your only a maintenance guy pls stop posting in tec threads

I knew id find alot of fan boys with this topic , Call me a troll all you want because everyone's a troll to what they push onto others, This is only a conversation and observation on my part

Brown oil is caused by condensation, Not letting motor run full temp, water in oil, I know a guy that started his parked car motor 5 mins in winter every week, plugged oil pump and seized motor

Theres alot of people that think same weigh different brands are ok, equals sludge aswell

The proofs in the pudding folks, I understand You never tried it and you have your perspectives but I know what creates sludge when i see it

I never change oil in my cars, I only flush twice and use same brand, i'm not drag racing them, My last car toyota corolla 350tho miles and still ran like new, Got in an accident and scraped it

Heat will mess up oil no doubt, i'm talking under normal running conditions

I'm not saying its better to not change oil but its a waste of money if you know what your doing My IH674 10 years 1 oil change because theres only one brand here for it 15/40 , and no black smoke under full load but only got 2600 hours on it, In a winter season of blowing snow I go through...

One of my brothers had a car that only lasted 120tho on it, he thought oil was oil and placed any weigh or brand, we took valve cover off and it was like thick vaseline all over, motor was worthless rod at 85K lol that could be anything like low oil or was hard on it, instead of insults try...

If you use the same brand and weigh you only need to change filter once a year, we ran 2 motors over 500tho miles this way, oil sludge is caused by mixing weighs and brands, alot of miss guided mechanics out there. My dad Was a mechanic and was taught this in school, he would always say the...

Where I live in east canada NB we got 3foot of snow on the ground,1foot last night,, but In my whole life I only saw no snow on xmas twice, long time ago and this year, they forecasted a big winter this year but they're wrong often

Friend on a skidoo hit a moose last night and died, be careful out there

Id like to know what happen here, Dubbed "the Year without a Winter," December-February of 1877-78 had an average temperature of 29 degrees F in the Twin Cities. A healthy margin of 2.1 degrees separates it from the next-warmest winter on record, 1930-31, which had an average temperature of...

A farmer the other day from USA said first time no snow and clovers were starting to grow in, He was worried about it but I have no clue why Albert said if we lose bees no humans in 4 years, he forgot that wind is a polinator aswell and bugs To much money in weed killer to save the planet

As a child i'm 50 We use to see -40c now -30 max and alot more snow, Climate change is the tilt of the planet moving 14km a year, they taught us in school each 4000 years Florida is in Canada, and ice does not expand when it melts plus most is underwater, theses electric cars are stupid, GM...

Depends where you live in NB, I seen over 8 foot drifts, I seen a snow drift on road once the plow had to back up and ram threw it like 20 times to break through, and they're big up here, 10 wheelers I live between 2 towns at sea level but im 30 miles away from both on a 1200 foot hill, we...

Right by the Atlantic ocean in new brunswick , we get alot of snow because I live in the gulf stream

We get 4foot storms and if wind 8 foot drifts

My first rule of thumb is making sure blower shoot turns by hand and not frozen in ice, learned that the hard way a few times , but cleaning all the snow off after is a good idea

Here in east canada we can only garden the first week of june, I like ice fishing but need a shelter to cold just sitting on a bucket, I'm not into skidoos because we get so much snow in a storm you get stuck unless light weight and a long track , i had a long track years ago i should not of...

That makes sense, My friend noticed it was low, and I made a thread few months ago showing the bend at bottom they said normal

Thx, scrapped my digital gauge with calcium, lucky i had those that slide, might of messed that one aswell My old tires stayed at 20 pounds for 10 years

Placed new 30 by 18.4 tires this summer, Guy placed 20 pounds, looked today and only 7 pounds, is this normal? with tubes and calcium

Welded then drilled a hole and filled it, To line up i used small finnish nails in splines to center it, got it almost perfect not even a 1/16 wabble when spinning

I noticed even if i weld it, the side of the blower has a section I can remove to replace the bearing if needed

IH65hp Weld or Drill a hole through it with a high grade bolt? Has a safty bolt no clue why the splines would strip, thinking of placing a new bearing on small chain gear and weld it , whats are your thoughts, thanks for input

I'm in canada , plus I did not take it apart because I never timed a diesel pump before on front of motor, Dealer said it was 250 to rebuilt but he took apart and shipped, my friend said he knows how to time the pump after rebuild ,il call him tomorrow kinda late here, thx for your time

I rebuilt all the seals and gaskets in my IH674 2 years go cost me 700, I guess thats his only option, my dealer would not touch it said they are complicated

What should I tell him to do?He said its still leaking fuel, Theres a specialist in fuel pumps 3 hours drive away, i guess il tell him to call them

My friend unscrewed the fuel screw it seems under pump for a seal leak on his tractor and now runs to rich, how do you time the pin behind screw? he says pin will not turn, they are timed or something with info he got from a mechanic, mechanic said good luck, heres a few pics of it

Its a ford 60hp, Sorry about that, il post in the ford section

Can't get pic at the moment, The screw underneath its a fuel screw?, he said it had a leaking oring, I did not see it he told me about it

My friend unscrewed the fuel screw it seems under pump for a seal leak on his tractor and now runs to rich, how do you time the pin behind screw? he says pin will not turn, they are timed or something with info he got from a mechanic, mechanic said good luck

Thanks for info and pics, Mine bulges little less than that but close, No tube tractors I thought it was ok,. my friend that got me worried , he use to own timberjacks and from riding over tree stumps he said it would wear tube and bust, So he thought and tried to convince me they would wear...

Nice studded chains, thats alot of welding:) , With my blower 1/4 inch steel it bends at bottom of tire about 2 inches with blower raised , didn't notice a bend with other tires it was my friend with 574 that noticed, then he checked his and was 30 , he has same blower, but 30 seems alot, my...

Cool , Do you have a blower? id rather have them soft for traction, my old tires must of had atleast 30psi, thats what my friend runs in his 574 but he has chains, could not try them this winter, hope theres a change, I almost placed them backwards for traction, got a small hill to climb at my...

Hi... Just placed new tires 18.4 by 30 and guy placed 20 pounds, But with blower up you see a bend on bottom of tire, I got tubes with calcium , My old tires were harder but i never checked pressure because I was scared the valve would be corroded, Old tractors are heavyer plus my blowers...

Yes, Im plugging in a shed soon so if I can burn 3/32 at 120volts il be happy, I got a 20 and a 30 amp single pole breaker I can use, tried it at a friends house today , wires in my walls are to small was scared to try, with 400 more watts with a 20 amp breaker i should be fine, im using 10 wire

At 120volts Just tried 3/32 rods and at 100 amp setting burned a full rod and breaker tripped right at the end with a 15 amp breaker, thats about 2000watts, 20 amp breaker is about 2400 watts Burned threw bed frames and thats kinda hard steel for 1/8 , great little welder , hope it lasts

I got my fuel pump all gasket new, with orings last year, I thought my fuel leak was fuel on top of motor from bleeding the injectors but it leaked all winter, so i'm glad that issue is fixed

My friends 574 has a bigger pipe, strange, he almost lost all his fuel last year, got home just in time, he opens winter driveways like me, same issue

I found the real piping, the parts guy at kubota dealer told me the IH guy gets the pipe at the volkswagen dealer, its fixed, no clamps needed

Lady on phone tried to take my money without telling me shipping and boarder fee, was missing 5$ on the card, She called me and I said il go put more money on it, then thought frig that im not paying 265$ for a pipe with a few fittings I already have

Found real Tubing , its metric , When you take pipe off the shaft theres a small fitting under it :) Cost me 8$ to fix, almost cost me 250 Found at a volkswagen dealer

They want 250$ Canadian for it shipped, its 150usd , maybe rare or hard to get that pipe on the bigger long fitting, Maybe try and get an addaper to make the pipe smaller?

I never saw a 1/4 inch clamp before but see them online, I used rabbit snare wire but one of the old pipes was leaking from a small hole, The big return fitting , not sure how to get on with heat or maybe soak in fuel 24 hours , heres a pic of it new

Its a very small pipe 1/4 inch thick

steel brake line? why

Can I use an ATV gas pipe? pretty much same size

Where do you buy just the pipe and cut it to lenght?

Mines leaking, No pressure in the return line, I found black vacuum pipe in shed right size no more leaking , but friend tells me diesel will eat it up, but said he was not sure Anyone know? thanks , its the really small pipe model, OEM has breaded cloth over pipe for no expansion i guess

No tank , just to put air in my car or atv

One can use a plumber valve to stop it at 30 pounds They have 3 pipes one is welded shut, Mines a small one I see alittle bigger, They say they can pump over 400 pounds , kinda dangerous , don't let kids use it , The pipe that pulls you can put a small filter on it so it does not suck in...

I made a air compressor out of a fridge pump yesterday, small and compact and pumps up to 200 pounds they say, only 2 pipes, one pushes other pulls, as a kid my dad made one, Alot better than those cheap store ones, A good compressor has an oil base

Helped a little not much, Talked with my brother thats an electrician and he said Id get about 15% stronger and looks like hes right

Little difference not much

I meant by law you can't, Thats what people tell me

Can't drive on pave with chains and i open my moms driveway 1/4 mile away id do it anyway if i found cheap chains , I can lock my back diff and both our houses are flat driveways i'm ok, plus calcium in tires

What a nice tractor, Front and back same gear ratio so on pavment not hard on everything , no money no candy

My neighbour thats one of my best friends had chains that would fit on my tractor with a little modding and a back blade, He sold the chains 100$ and 200$ for back blade, He had no clue id want them

Frig you get just as much snow as us, probably not but that's alot of snow, east canada NB

Getting welder plug in a few days, can't wait to see what I can weld with generator , if stronger than 120v plug with 30 amp, il only weld with generator

New question did not want to make a thread.... 15 amp breaker vs 20 amp breaker, I heard they are the same inside, So i went to see a friend to weigh them and the 15 is 5 grams heavier than the 20, So i guess il buy a 30amp( single pole) but going to run on a 20 amp outlet, I should be fine...

Ya I need studded tires and weight , its not bad i only need to play with the brakes in maybe 3 storms a winter, we get about 12-15

Do you have to bleed system when you change filter? maybe thats his issue

My friend has a 574 and forgot parking break on now one side only breaks alittle, Id have to look but I don't think I have one , i'm sure i never used it and brakes fine both wheels, must be a big job to replace with a cab, I might change hydraulic fluid filter this summer, it might be original...

It was similar with a 4 cylinder had aluminum tracks aswell just a bit less wide, but those things go anywhere , not sure of brand it was green, winter skidoo trail groomers

I almost bought one of those , All it had was a stripped front rubber sporoket , Was in a field for years, everytime id pass buy id think i wish it was forsale, I go to see it and he promissed it to another guy the week before, Could of got it for 2500

if i bring blower 4inches closer I don't think it would help much, dealer told me to do that

Thats what i do i steer with breaks, but don't want to ware them down, some say they last a long time I placed new tires otherday on back and I asked guy 20 years in service if I used threaded studs if it would help and he said they rip out in time But factory studs would not rip out, I asked...

In winter on ice it slides alot, thinking of placing 16inch truck tires with studs, Will it help? I can bring blower closer to tractor with a bolt slot but would have to cut shaft shorter and the angle pinch would get worst, not sure what to do, cut shaft or get studded tires or both?

Thx... My breaker box is full but one single breaker only lights up two bulbs in the basement , I'm going to get a 30 amp single breaker and use 10 wire or 8, and in garage im going to use a 30 amp outlet, its only a 14 by 20 garage but its all i can afford at the moment

Found one for 45$ going to try

Thx... Il buy adapter and try

Yes it says I need grade 6 but my friend has 100 feet 12 gauge and welds with it thx for link, I might try to find some grade 8 while im waiting for new garage

Run both generators at a time but i'm not good in electrical mods , i'm going to run a wire to my garage when ground is not soft and muddy , in about a month, I'm going to run a 10 gauge wire 100 feet( or 8 maybe), and only use single pole 30 amp breaker,Breaker box is full , I should be able...

:) I stopped drinking, its been a year, Got gout and it went away, now i'm a pothead I guess, don't smoke much tho, love it with my morning coffee

One generator is for my moms house other is mine, Thats a cheap generator but i'm in Canada

Heres specs of my welder, The generator is a champion 3000. peak 4000 I welded 5/64 rods nice penetration at 75 amps, it would bog when starting to weld then smooth off nice, Generator 4000 starting watts then runs at 3000

Everytime hes come over to my shop he would ask to buy a tool, I thought I was selling house and moving closer to town so he got most of my tools really cheap, Tire removal sold it for 40$ Got my ATV 4x4 for 500$, tons of tools, paied him over 2000 coffees through out the years, he never...

damage the internals of welder and generator scares me aswell seeing the welder is an inverter, I had a 200 foot 8 grade wire my friend kept bugging me to sell it, sold for 20$ now I have to pay like 3-400 for a new wire

The round plug on generator says 120/240 volts, Will it be stronger considering its only a 4000watt generator? If i can't weld 3/32 rods its not worth it to me to buy adapter

The garage im getting will have no electricity for awhile so 3/32 would be perfect for a few projects I need to do for my tractor, need to weld 1/4 inch mild steel Wiring in house is small grade, Don't want to melt anything , I need to run a 8grade wire to garage

Opps... I should not buy adapter?

If i could weld 3/32 id buy it, thx

Or this one for my new generator in box https://www.amazon.ca/Parkworld-885392-Welding-Adapter-Receptacle/dp/B06Y2GH6F3/ref=sr_1_18?crid=2M5JR1Y4N7NI5&keywords=Welder%2BAdapter%2BCord&qid=1682551423&s=electronics&sprefix=welder%2Badapter%2Bcord%2Celectronics%2C168&sr=1-18&th=1

Id need this one for the generator i'm using , Is it worth it? ...

Frig it, Atleast I can weld 5/64 , adapters are like 80$

Looks like this , Will this plug help? Both welders are champion 4000watts, strange one is a 4 wire and other a 3

My welder is a 120/220 but I only got an adapter that plugs behind a stove or dryer

So the 220 plug on generator will Help more? I'm pulling in a garage soon, need to wait till not muddy or soft soil, And il give it a try, thanks,

Tried with 5/64 rods and generator is working at max but nice welds at 75 amps, My question is The round 220 plug stronger than the outlet plugs? I got a round plug but 3 wires but generator is a round 4 wire, I got a new generation in a box 4000watts aswell that the plug fits, Would there be...

You are a noob trying to act like a pro

Went IH dealer today for parts and asked mechanic If i should retorque my head bolts, He said if not leaking leave it alone, If not broken don't touch it I guess Valve stem on tubes were rotten about to bust, lucky I did not make a mess.

All done...

Looking with my eyes they're alittle less wide then my other 18.4 tires, site says 18.1 , At least they are new, Il take pictures after, still have 6 inches of clearance , he said I could not of placed wider tires, A 20 inch wide tire would of been nice but they dont make them

He just removed one tire and rim is like new, he said 18psi , i'm using a tube

Guy is here for tractor, Site of new tires says max 28psi, what should I tell him to put? thx Filling tires with calcium

Place same tires or it will mow funny, you will have to adjust or mod back plates longer Place chains, thats what I did, Could not climb ditch

Paper boy through out all papers in a storm once, Could not see it, Alot of people broke the safty bolt

I had a IH444 once, The reverse gear bushing messed up, Dealer said he changed one once but did not last, it was a double clutch, I like the single clutch models, Mine does not have glow plugs but plug the Preston heater 20 mins and away it goes, I can blow 3 foot of snow in 2low and no...

The 684 Is a 3.9L diesel aswell, all they did is turn a screw, it strangely lowered PTO hp

Nice tractor in pic

Installing tires next Monday :)

My friend has this model , i'm going to use, Look at the tip options, This is canada amazon , you can get it cheaper...

They lube the spider gears :)

No waiting for a nice day, Bought plastics once that had similar welds, Now I know how it was done

I placed a XR650L motor on a 400ex frame, bigbore 680, 720 Max bore is the sweet spot but need to hone cases for the bore to fit, You can 830 but need to beef up the crank case and its aluminum. I stayed at 680 because I didn't like the compression ratio of the 720 piston options Used dom...

On a 4 stroke leave the motor stock if you place a turbo, if you want it to last, Id rather bigbore and play with compression ratio

torque longer compression stroke, shorter rod more RPM

The clutch basket and crank gear of the trx300 can fit on a honda 400-450 and I think 500, not sure, It lowers the gear ratio 35%

Or new fender 500$

Bought a 1990 TRX300 like new with nipples still on new tires, A lady flipped it and cracked front fender, Heated garage stored, Got it for 2600$, Anyways im going to try and weld it this way.

One of my first welders, clarke 131e arc welder 120v, 130 amp, Alot stronger than my 120 volt lincoln mig welder

Ya or buy two for parts

Take valves off head and polish exhaust, intake scratch off all bumps with 220 sand paper, cool trick is place your carb boot on head and sand it even with port. threw the valve holes. Take a spark plug and gently grind the tip till its even with shaft, so the fire does not hit a wall. I like...

I always place auto motive oil in my atvs because its slipperier, the trick is let your motor warm up and it will not slip. plus a clutch is alot cheaper than a full rebuild, plus more hp Bet this is going to open a can of worms :)

I got 6inch of clearance with Good year tires with same thread pattern( got a big SIMS cab) but different brands of tires very a little, Dealer Did not call me yet but tires were in stock BKT TR-135 18.4-30 D/8PLY Tires Overall Diameter 60.8...

80tho, not sure if tax included, the boss was not there, Whats its weak point?

Https://www.lectura-specs.com/en/model/municipal-technology/vehicles-compact-utility-tractors-carraro/ttr-4400-hst-1001780 12km per hour

Just went to dealer, The one he sells is the TTR 4400, he said its a 45hp, and with no cab or blower 80tho, He said no tax on 70hp tractors now, Not worth it to me but i'm still going to look at it, he said hes getting one in a few weeks...

Don't forget to shut tank if travailing with it or gas might get into base, later

Lets talk a little about generators :) ran into this issue like 10 times in the last 2 years on friends rigs, The plunger under carb that shuts the main jet, just cut it, My cub caddet mower is new so after warranty runs out its going to get cut as well, good night

Champion , still in its box

I did not try it higher than 80 amps only used it on a 15amp breaker , Got a generator 4000watt peak 4500 but not sure if safe.

Just a little side note, I did not get whats in picture, the plug coming out of welder was the 220volt plug and they gave a 120 volt adapter, that's how confident they are in their product , they want you to use it to max settings, I only used it for 120volts, burned 1 pound of 5/64 rods Just...

You can buy 4 diodes and covert AC to DC but pricey, later...

Just checked... Where are Tooliom welders manufactured? Canadian TOOLIOM is a Canadian brand that is known for manufacturing high-quality professional tools. And one of the best tools is welders.

A old AC with a capacitor, nice welds but did not like duly cycle even with a protector, Like I said i'm not a pro

Not my money but look at this, I'm in canada so should be cheaper for you https://www.amazon.ca/dp/B08C9J3PS2/ref=emc_b_5_i

I'm no pro... I mostly weld AC , but bought this welder last year and impressed, I built a sand racer(2000 hours) and a 6 inch lift on a ATV https://www.amazon.ca/gp/product/B08B3VHN54/

Ya... I wounder what the blower options look like https://www.antoniocarraro.it/en/catalogue/sn-v-major

I just looked at your spirit, go kick some rocks

49.7 horsepower is less than the 50 horsepower exemption. LOL we can round it off or turn a screw

700 Grizzly 4x4 has full lock , Any stronger and you will blow the 200$ belt, My brother bought the 660 model(700 is just a bigbore), Auto atvs when the one way bearing lets go behind the clutch it's kinda pricey, plus check oil often because the base does not hold much oil

jeff9366 hi, I'm in east canada and own land, I like its turn radius, like a small timber jack, so Don't have to make wide trails, plus here any tractor 50hp and more you don't have to pay tax, I did not look into it much aswell, But the dealer is close.

How many hours will a Yanmar engine last? 10,000 hours seems to be the upper limit on most Yanmars. Of course you do have to send the injectors out for recalibration/rebuild about every 2000 hrs. and the Injector pump out at 5000 hrs. if you want a 'perfect' engine Saw some a few years ago...

Yes, lights in grill and a diff lock

674 40 HP to 99 HP

Il take similar pics but i'm not washing it :)

Diesel, pull bar and fuel screw never used/touched, only used to blow snow NB Canada

Il take a few pics after I put the tires on, Its going to ride like new

Placing New tires next week, Mine are like new but cracked, When tractor was new they placed wider rims so a 80hp 18.4 tire would fit without hitting fenders, got 6inch of clearance , on a 16.9 rim the tire would be to tall BKT TR-135 18.4-30 D/8PLY

Manufactured: 1978 - 1984, But can't find how much were made in london england, i'm in Canada

Is mine worth this much? https://www.aumannvintagepower.com/articles/record-selling-price-international-harvester-1066

Whats an estimation of its worth? 2600hours, thx

Ran it for 1 hour blowing snow to make sure everythings ok, when the gauge first worked it marked about half a tank so i placed 5 gallons and it went up to 3/4 , sense i got tractor( 10 years) 3/4 meant full, so go out to try it for an hour and it read full and i thought frig its not working ...

Said frig the snow, Jumped a wire to positive of battery to gauge and nothing, plugged to other wire and my Fuel gauge works :) Theres only two wires I though 3, One is double connection I thought it was a ground, When i close main big switch fuel stops working as normal, I should not have an...

Snowing today, thanks for the help everyone il try tomorrow to see if power is at the sending unite , if sending unite is ok i might run a live wire to fuse box and check ground , could be i burnt fuel gauge , one wire from the gauge went to temp gauge not sure if its a ground because all the...

Both gauges stopped working when i placed a ground from starter to battery , it even bypassed the big shut off switch motor would still turn with switch off , Tomarrow il check if power goes to sending unite for fuel , Hope its ok because I got a big cab on my tractor and have to remove tank to...

,I bought a universal gauge for temp because that kinda scares me, the fuel gauge Tried with a test light with key on , nothing, no 12 volts going to gauge, Do i try sending unite ground to battery , or live wire of sender to gauge, thx for help

made cheap, thats why i got rid of mine and found a IH with low hours , The motor mounts on the right side come loose and mess up the threads, Gave it to my brother 17000 down the hole

Il drill a small hole , maybe next summer il take tank off to get at it

fill with sand and weld both ends, it will bend easier with less kinks

Found a problem I had for 10 years , In winter when cold I had to heat starter for it to turn and fuel gauge would sometimes not work , It was the starter to motor ground , in summer it would start fine, last starter lasted 8 years, like new inside but all rusted by the condensation from heating...

I got pressure in my tank so it must be blocked , would a cap like this work so it can breath, I should of started my thread by saying i left new cap on over night and when i open tank next day air came out Gates 31623 OE Equivalent Fuel Tank Cap, Fuel Tank Caps - Amazon Canada

Seems the breather pipe is plugged and to much of a big job to fix so im going to buy a cap that vents air, lost 35$ for a cap i cant use unless I drill a small hole, thanks for the help

I found it in a diagram , goes under tank towards motor, Do this breathers clog often?

I bought a new fuel cap Because The rubber was cracked , Looking inside the tank you can see a breather pipe But no pipe coming out of bottom of tank , how does it breath? through the fuel filters? With new fuel cap no air can bypass it , Just kinda worried il have issues , I looked for...

IH 674 ...Every time i try to start my tractor I have to click the switch like 5-10 times. I thought it was a solenoid issue , so new solenoid same issue, Do i need to place shims to pull the starter away from ring gear?

last winter i had to always heat the solenoid for it to start so i took apart this summer and greased up the piston with motor oil because it was dry, i was thinking that was the issue, but today -15c and i have to heat again, do i need a new solenoid? thanks for input I looked on line and no...

Hi guys... Few days ago I burnt my alternator because of a live wire touching frame,and seems to of burnt my safety switch/resistor as well, I bought a new alternator and its not charging, i want to run the small wire to my key switch and the big wire to pos of battery, My question... With a...