kubota bx24

Hi all, After lurking around for awhile I finally broke down and bought a new BX24. Just BH, loaded tires and FEL w/hook now but I do have a DR grader I used with my Husky that I will pull now with the BX. My road is about 1/4 mile long. I already ordered skid plates and thumb from Bro-Tek...

So, I have owned my BX-24 for about a year and a half now with about 75 hours on it. Already I have: 1) The cracked fender/deck problem 2) The hour meter is at around 65,000 hours and the headlights don't work 3) The battery cover does not fit 4) The handles all pull off when you try to...

What's a comparable model to the Kub BX24 in green, blue, red and any other color?

Well first weekend with the BX24 and I got it stuck 3 times the last time I just couldn't get it out by itself. So I had to bring the pickup over to give it a little yank backwards....with the BH on I wasn't sure where a good place to hook the chain to. I ended up using the loop the the...

Looking for feedback on Bx24 backhoe Thumb which make do you have and your likes and dislikes about it and any other infro. about it you like to share

Three years ago I bought a BX 2230 with loader and 60" mid-mount mower. I absolutely love this machine, but have found I could really use a backhoe, whihc of course, is not available for the 2230. I only have 180 hours on the machine and it is in very good condition. I have talked to a local...

Well after looking for over a year I finally decided to buy a BX24. The new Kubota financing pushed me over the edge. I should have my tractor delivered this weekend. Anyone have any tips for a new owner... The dealer is welding some hooks to both buckets, loading the rear tires and adding a...

Hi, Has anyone had any experience using a hard cab for a BX24? I am thinking about getting one but not sure how easy they are to get on and off and whether there is enough room in them. I am average size (though my wife insists I lose weight!). Also, does anyone know of a cab on the used...

I think I致e made my decision to purchase the GC2310 TLB based upon build and operation of this tractor. Now I'm new to this whole tractor thing so you may want to take this review with a grain of salt, just my amateur observations. I test drove the Kub BX24 and JD 2305, both were very nice but...

I got my BX24 last week on Sat. morning. The 3PH assembly was wrapped in plastic and was put in the FEL. This morning I went out to the garage (haven't had time this week to barely look at anything) to get the stuff to see if I could figure out how to put this thing together (no experience...

I am new the the compact tractor scene and recently purchased a Kubota BX24. I have figured everything out with this thing so far, had to tinker and take the BH and FEL off along with the 54" MMM, just to see how hard they actually were to remove. Not to bad and I was surprised how easy they...

did a search, but no luck... ;0 anybody try mounting some front fenders on their bx yet? i was driving all over town on slush covered streets with and without front chains and every puddle would throw up a ton of salty, muddy crud onto the foot rest area. needless to say, this did not help...

What kind of trailer do you use to carry your Bx24? I'm thinking it weighs around a ton. Pictures would be great. Thanks.

Went out to crank her up. Dead battery. Charged the battery and with the key off, the dash lights were on. Started the engine, then switched it off and the engine kept running. Called the dealer on how to stop the engine. He said to push the solenoid manually inside the engine compartment...

Hi everyone. Gone some time since I popped by here! As I enjoying my Bx24 I sometimes feel that I would like to get a bigger "Rig". The B26 feels like the big brother of Bx24, looking thru the specification on the B26 everything is the dubble strenght. I feel that the backhoe on my Bx24 is a...

Anyone have any suggestions/experience with a box blade for the BX24? I am thinking of getting me one for my lane/landscaping chores. Do they handle a reasonably sized one okay? So far, I am pleased with my machine. The BH/loader and mower are all first rate items that I have got a lot of...

My 2007 BX has been making a loud clanking noise, that sounds like repeatedly hitting a piece of flat bar with a ball peen hammer. It does it randomly and some time changing the engine RPMs will make it stop. Sometimes it just stops after a while. This has been going on since it was new and the...

I'm looking to see what my options are in chipper/shredders for the BX24. So far I am not encouraged. Not much out there, and what is there is very expensive (seems to me). So I found this KPX site which has a chipper for $1999 shipped to your door. I see that it weighs 800 lbs. I look on...

We're really struggling with this one. I'm not positive about the choice being Kubota, and the issue of this thread is really about buying with a BH or not, so I put it in this forum rather than the Kubota section. I'm wondering if I will use the BH much past this first year when I get a...

I'm looking to purchase a service manual for a Kubota BX24. I would like the OEM Kubota service manual. Where could I get one of these other then the local dealer??? Thanks in advance for any information........ Craig

A question about the capabilities of the BX24. Here, is a Cl1 snowplow from TSC, Can a BX24 handle this as an attachment: http://www.tractorsupply.com/webapp/wcs/stores/servlet/ProductDisplay_10551_10001_34302_______14345|14346|14354|34302?listingPage=true Some say the BX24 can handle CL1...

I don't know how long the two BX24s that are on the lot have been there, and no one is talking. :( The head salesperson told me it's only been there "about a month". Uh, OK. So you got two BX24s delivered about the middle of December. In central New York. It must be true. :rolleyes: So...

delete dupe

Hi All, My wife and I are pretty sure we're going to go with the BX24 for our five acres. I was going to get the MMM, but I'm seriously considering going with the back mount type rotary mower. The reason for this is that I fully anticipate needing the BH and FEL for work in between most...

I've never used a tractor at all. I'm new to all this. My dealer/salesman made it sound like you can raise the height to anything you want on the back and have at it. I've read on numerous threads about all the gravel scraping with the plow and stone throwing with the snowblower. My driveway...

If I'm interfacing a "foreign" piece of equipment to the loader control valve, How do I determine which connection does what? I'm connecting my BX2764A plow to my BX24's control valve. The tractor has RED/BLU/WHT/BLK hoses. The plow has RED/BLU/GRN/YEL or WHT (not sure which as it's pretty...

i was wondering if any body added one??is it worth the money and where did you find them ?thanks i just recived my bx24 .and any other input would be great.

I took delivery of a new Kubota BX24 Tractor at the end of December. It's still sitting in the garage right now but I have begun to mount the goodies to it. I decided that one of the first things I needed was a Thumb. Here in Western Pennsylvania it can get pretty rocky, and also I cut a lot...

Hey all, I've just spent the last three hours pouring over 20+ pages of this section of the forum going back to winter of '07. I've got 5 acres. About two are lawn. I've got a stand of pines that need work, I've got really rough ground that needs to be leveled. Some of that is from the old...

Well, It's between a Kubota BX24 TLB HST @ about $15250 and a Kioti TLB CK20 @ $16250 or $17250 If I insist on the hydro. You gotta say the Kioti ck20is much more tractor than the BX24. 1: CK20 weighs in @ twiice the weight 2100 lbs vs about 1100 lbs for the BX24 tractor. 2: CK20 lifts...

I found a good deal locally on a Patu DC 40 mf wood chipper. Does any one have any experience with running a chipper off a BX series? The specs of the chipper seem to fall in line with the limitations of the tractor just looking for some opinions Link to chipper Patu DC 40 Woodchipper

Is there a way to float the FEL on the BX24? I was trying to clear snow off my driveway but the bucket is either scraping too much or not enough. The manual says it will float but haven't had any luck.

I am ready to change the oil in my BX24 and also my Dodge Cummins diesel truck. I have been using the Mobile 1 turbo diesel oil in the Dodge but it is expensive stuff and I've heard the Rotella T is very good stuff. I would like to use the same type of oil in the tractor and the truck. Any...

A friend of mine lives in northwestern New Jersey. He has a gravel driveway that is approximately 750 feet long and has a change in elevation of 300 feet. His house is located at the top of the "hill." It currently takes him about 4 hours to clear the snow using a heavy Troy Bilt blower (I...

Does anyone have buying experience with the Kubota 2763A 60" plow blade. Got a quote of $1700.00 without unloader valve, and was wondering if that was a fair price.

Hi all, I am not experienced with tractors so regardless of what I purchase I know there will be a significant learning curve. The same thing goes for my wife as this will be her first experience with tractors. I have been considering purchasing a BX24 in the near future. However, on a...

I thought that I've read before that there is a wiring harness already in place for auxillary lights on a BX24 and that it's under the seat. Can anyone verify this? I lifted the seat and looked last night but did see any unused harnesses.

Hi. I have a BX24 .Iｴve seen on the forum a while ago, where to conncect your extra lights under the seat. There is a loom under the seat where you can use for extra lights on the ROPS. I cant find the thread anymore, please I need some help. I bought four Xenon lights. They are 35watts each...

Do any of these match the style used on the BX24 FEL? Surplus Center

I had a BX22, and am now comparing my experience with that tractor to others that I'm looking at. The Kubota web site says that the overall width of the new BX series is 32.? something inches. That seems narrower than I remember. Could someone check out the width to the outside of the rear tires...

Oops! I got a server error when I tried to post this, and ended up with a double post..... sorry

Just a note to anyone who has ever pulled a tubeless off a rim - you are NOT doing it with conventional tools or approach with these R4 "Rim Guard" jobbies that ship on the front of the BX24... for as small and cute as they look - it takes 2 burly men in a John Deere garage to get it off...

I want to dig up dirt with the backhoe and move it to another location. The "normal" way to do it would be to make a pile with the backhoe and pick up the pile with the FEL to move it away. There are some situations where that method is not desirable. One, for example, is when you are digging...

While trying to resolve the question of which loader QD points to attach the hoses from the Quick Hitch/Subframe on my BX24 (see related thread posted earlier today), the tech at the dealer told me to make sure that the Quarter Inching Valve on the BX24 was set at the "mid point" in order to...

We decided to start stocking the Wallenstein for the BX24's. We specificly wanted to come up with some best practices for installation since many of you have been having problems with bolt on thumbs. We found two things that where easy solutions to the problem. 1st - Weld it! Its easy to run a...

Was considering a second set of wheels and tires for future projects, and was wondering about puttin' a set of BX24 rims and tires on my BX23. Apparently they fit, as I saw a picture somewhere here where someone did it... My question is, with regards to maintaining proper "lead" between the...

Hi. I know this is an "old" thread....But please help me. How many amps or watts do the original alternator on my BX24 2007 put out? I just bought 4 xenon worklights a 35 watts each. So with all four lights on it will consume 140watt. Will this work? I will post some pics on the lights, very...

hi all! been lurking around here doing research for several monhts. tons of great info and many thanks to all particpants for helping me out before i even signed up! i finally pinned down what i wanted/could afford and pulled the trigger yesterday. dealer is doing locate as i type...

Mine did. I used it for about 90 minutes along with my trac-vac off the rear PTO. I switched to rear pto only to use the trac-vac alone with the extension hose/wand and used it for about 20 minutes. Then i went back to mower and trac-vac and when i started the pto the mower pto shaft popped...

I'm happy to report after fixing the lower link pins, the upper link pin placement and the chute rotation lever - I have myself a working snow thrower on my little BX24... There is something to be said about having the right tools for the job! Bluebird Meadow Farms: Our first real snow - Part 1

Hi. I have found a company who sell the BX2350 here in Sweden. Tell me if I wrong but isnt (speaking about naked tractor) the BX2350 and BX24 the same machine? In that case I can get spares/service parts for my BX24 here instead of ordering from US (which i really like:D ). Saves me alot of...

Hi everyone. Yesterday I picked up my new BX24, which I imported from US. I think its the first new BX24 here in Sweden:D . So I when got home I unloaded the BX took it in the garage installed my Bro-tek skid plates and thumb checked the fluids, if airfilter was installed (!) Went trough all...

I figured some you have bought ones you'd never buy again (due to spilling while pooring etc.). Are there any to avoid or look for? I saw this 5 gallon round heavy duty looking metal one at the dealer but wasn't sure if it was the right one to get. It looked like this one 5 Gal Yellow Type 1...

This simple modification allows me to use the differential lock by hand, does not get in the way of anything, and I no longer bump my head on the steering wheel when bending over to engage the differential lock. For those of you that don't know, my left leg is MIA. :rolleyes: PS. The dirt...

I went to install the Wallenstein Thumb on my BX24 well aware of the sliding issue. This "Third Generation" design is supposed to fix the sliding issue. I get the thing on there and just hand tighten the bolts and check how the new plate prevents it from sliding down where the high pressure...

I have the Kubota plow to attach to my bx. I am assuming I should leave the hoe on for weight? Anyone have a link for chains for the r4's? Thanks. clueless in nh

It's my understanding it's not a good Idea to travel with a big rock in the Backhoe bucket/thumb. So how do you move them, to another area? Trying to pick up a big rock (after it's been dug out by backhoe thumb) with the FEL isn't that easy chasing it and can make a mess trying to get under it...

Does anyone have the owner's manual for the RCK60B23BX MMM in PDF format that they could E-mail to me? I picked up a used mower but no manual.

I purchased a BX24 this past summer with the intent of a little yard work, but my biggest reason for getting the machine was for blowing snow on my driveway. I should say STEEP driveway! This is the way I have my tractor set up... I have Kubota's 50" snoblower on the front Wheel weights on...

I talked to the guys on ebay that sell the Wallenstein Thumb about the slipping. The current thumb sold is a third generation and has been modified to not slide into the fitting. I saw one the other day on the shelf and there is a new plate that goes on top (that narrows the grip or limits how...

Did my first 5 hours or so yesterday. 1) I turned the tractor around on the beach a couple times (turf tires). It has slight incline as you go away from teh water (like a beach). I was in 2WD High. Oops. As I turned up the incline it stopped. It didn't spin tires it just didn't want to go. So I...

I was uncomfortable with the sales person at Messicks (not Neil, Neil is great). So I canceled. I was ready to wait till spring but I called my local dealer one more time who is not known for negociating much (MB Tractor in NH). Well they did, with the money I saved on delivery because he is...

Hi!! Just thinking about a block heater on the BX24 for winter. I live in Ma and winter could be cold. If I do need one, how do I install it? Where does it go? And how much are they?? How does the BX start when it is really cold?? Any other tricks to keeping them warm?? The Wife does not want...

I know the BX24 might be a little small for this but I have quite a few stumps in odd places that a stump grinder is hard to get too with. Many are old stumps. Can anyone share do's and don'ts getting these out? Most are 12-18" but a couple are huge 30" or more but very rotted. I have all the...

I'm in the middle of doing my 50hr service on my BX24 (actual at 65hr... been busy). Everything is going well but I do have a few questions about replacing the gas line filters. There are 2 of these, one next to the carburator and the other underneath the body. I replaced the one next to the...

First, thanks to all on TBN for the advice that led to the purchase of my BX24 birthday present. One of the main justifications for buying the tractor was to keep the blackberries along our seasonal creek under control. Besides sucking up land they're a fire hazard in this country. For a...

Hi all, I have a BX24 w/ about 75 hours on it. I was under it the other day and I noticed that the rear boot on the drive shaft near the plastic white fan was broken. The first "bellow" of the boot seems to have sheared off, leaving the boot w/o a top. Interestingly, the top of the boot...

I need to pickup my BX24 and this is a one shot deal. I'm renting the trailer and don't plan to own to do this on a regular basis. I can tow my 4500lb Boat/Trailer set with the Jeep several times 120 miles. I can't exactly accelerate at 60mph up hills but there is no need to push it. The...

Should I be cleaning and lubricating the cylinders on my BX24, especially after heavy use of the hoe or loader? Specifically, I am referring to the "shiny rods" that move in and out of the cylinders (sorry...I don't recall the names of those parts.) Any advice?

What is the correct position of the FEL bucket when supporting the front of a BX24 while using the hoe? Should the bucket be in the fully dump position or should it be level? It seems that the only way to effectively raise the front of the tractor is to have the bucket in the dump position...

I've converted my boathouse into a shed (filled in part of the floor where boat would go). It's a pretty good size about size of a roomy one car garage. Any way, barn swallows nest in there in the late spring. We've been living in harmony for many years and don't want to harm them or scare them...

Hi. After 2 hours of intermittent use of the backhoe today, I noticed the smell of fresh hydro fluid. And I noticed smoke (probably burning hydro fluid) coming from underneath the tracktor. I stopped it immediately...Noticed hyrdrofluid under the seat area and on the ground. Hydro fluid was...

Just brought my new BX24 home on Friday night. Thanks to all of you on TBN for all the information and tips. Pictures to follow when I figure out how to attach them. After reading over the manual with breakfast I headed out to the garage where my car used sit, now the BX24 is there. I ended...

I have a narrow "crushed bank" road to grade (I believe it's called crush bank, I'm in NH). It's sandy with small stones and maybe a little clay to hold it together. It packs well unless water flows over it heavy. Road is only wide enough for one car to pass. It has a steep incline. It's cut...

I'm finally getting around to posting a little information about my FEL bucket lip forks. After looking at many posts about bucket forks, I molded several ideas into one product. Never having to get off the tractor to put the forks on the bucket and no falling over forks after removing them is...

Will this work with the BX24 backhoe I am looking to take the backhoe and make a Mount on the back of a Suzuki Samari Quick on and off just like the BX then take this Hydraulic powered unit from this post hole unit and Mount it in the back of the Samari to power the backhoe put a seat in the...

Hi everyone! New here. I just bought my self a BX24. I would like to be able to fit a 3 hydralic funciton on the backshoe, because Im going to fit a "powertilt" which makes life alot easyer when landscaping in gardens. And a 3 function on the frontloader would help me aswell. Has anyone done...

I have been reading this site every night for the last two weeks trying to decide which tractor to purchase. Great site by the way! I will be completely re-landscaping my house, to include new paver walkways, stone retaining walls, floor beds, excavating under my deck for a shed/storage...

Hi everyone! Iｴm new here. I just bought my self a BX24 new and waiting for the container from USA to arrive here in Sweden, the BX24 is not avalible here in Europe. I would like to be able to fit a 3 hydralic funciton on the backshoe, because Iｴm going to fit a "powertilt" which makes life alot...

My property is on the water. Lot's of sand. Some rough grass (which can be soft). And a "Crushed Bank (mix of sand gravel and clay I think)" steep road I wish to maintain with it. I plan to move lots of rocks. Some on the edge of the water in sand. I might try to use it to launch my boat. I...

I have searched and cant seem to find an online source for specific BX24 parts. I want the new battery cover and seat, and after a few phone calls to my totally incompetent Kubota dealer (thats a whole other thread), is there any online place to order these? I understand they are warranty...

After seeing these great prices and comments on Messicks I finally called them and pulled the trigger. I'm a little worried the tractor is overkill for my small property needs and I should just rent. I tried renting and the machine was a piece of crap but managed to get 1 job done. But these...

There have been several questions asked about where the BX series are manufactured. I understand the tractor is assembled in Gainesville, Georgia with the engine coming from Kubota in Japan. Does anyone have a photo of the tractor nameplate (w/o the serial number). I believe that would provide...

I was motoring around today on my machine and felt something sharp on the steering wheel. I look down only to find the steering wheel broke! The plastic looks kind of funny inside so maybe it was a week spot, but boy did that surprise me. The machine is 21 months old .... now I get to find...

Just wondering if anyone has used Pat's easy change system on a BX24. I'm contemplating using it (possibly with their stabilizer bar) to make an easier job of attaching my woods 40" rotary cutter and other large implements.

After lurking for some time here, I will be pulling the trigger on a BX24 in the next week. I have 1 1/2 acres that I will be clearing with the help of my chainsaw, bandit chipper and the new BX. I will be moving ALOT of dirt and ripping stumps of the trees. I'll probably get the Brotek...

I get two different stories from 2 different dealers regarding the current model snow blower , 2750c, fitting my BX23. One guy says I need a 2750B blower and related BX23 parts(shaft kit and quick hitch kit),or a longer drive shaft for use with the 2750C because the shaft is more offset on the...

I am working on my first project with my new Kubota BX24 Backhoe. I am digging a trench about 18 inches deep for a sprinkler system in North Carolina clay. I have hit some kind of super clay and I am having a devil of a time getting through it. I can only scrape off a small layer with each pass...

Yesterday, I'm trying to reattach my FEL to the BX24 - the FEL is in the garage (the BH is behind it - next one to get re-attached). I put the BX into low gear and creep up to the FEL from outside the garage - then the motor sputters. I press the HST a bit harder - front wheels go up! Try again...

The loader on my BX24 has a second position for dumping the bucket, which I thought was just a float-down dump. But, this doesn't seem to be the case. If I have the loader on the ground and I push the stick out to that second detent, it lifts the tractor up. Did I hear wrong when I hear that...

I'm trying to figure out how to improve drainage of about 60 acres of clay-based hayfield - hopefully with my BX24. Would the Bro-tek ripper and trencher attachment create a gully of some sorts that can at least drain the surface water off? What are people here doing about hayfield drainage?

There is a used BX24 for sale out here in N. Ca with 147 hours on it for an asking price of $17,500. Seller says it's still under warranty, bought new december 2006, and includes trailer and spare, chains and binders, 2 buckets 10 inch and 12 inch, and a box scraper. The trailer is a Carson...

As I was bush hogging the field... and getting about ready to be done for the night as light was quickly fading... The tractor started loosing power - lurching - I thought "what has been maybe sucked under the hog?" So I killed the rear PTO... still the tractor languished - sounding less and...

... for a BX24 with just the FEL and BH and Turf tires. I'd like to know of any adjustments I should have the dealer do (rather than having to do them myself or call someone out later.) I'm thinking particularly of stability adjustments (but any other suggestions are welcome). Does the BX24...

I've been digging a couple of trenches with Mighty-Mite (my bx24) and now these trenches are close to meeting. Unfortunately, one of the trenchs is not deep enough and I need to dig out another foot or so over about 30 feet. The trench is as wide as the BX BH bucket - is it safe to stradle this...

[Aspiring BX24 owner so I can't answer this for myself.] Does the ROPS have to be up to attach the backhoe? The question is motivated by my garage door height and how often I may have to raise/lower the ROPS as I enter garage to pick up attachments.

Custom fabricated thumb! welded piping thru the boom so it would help the rigidity of the boom. 2 pins and the thumb comes off! I used it for about a hour moving brush around, moving railroad ties, small logs and just plane messing around. I was able to dig with the thumb attached but I...

Has anyone any thoughts on just how well the BX24 does just pushing the snow with the FEL? I am hoping it will do a good job and not need a blade on rear....I was planning on just pushing and letting the FEL load up and keep pushing rather than dumping it. When it gets high enough at the end...

I saw the thread elsewhere about the acceptable number of clock hours on a new tractor, but my question relates to the manufacture date/time on lot of new BX24s (which I'm considering). 1) The earliest reference I found to BX24 in this forum dates from December 2005 so I guess the model name is...

The other day I was lifting a finish mower deck with my FEL and I pretty much maxed it out about half way up (I am assuming the pressure relief valve kicked in). What really surprised me was that I was able to curl the bucket with no problem to lift the deck further. Has anyone put the next...

I'm in the market for a rear blade for snow removal. I would like to buy a rear blade that will work with my current BX24 and that will work well with a B3030 or L3540 if (when) I upgrade in the future. We get a few 8" to 12" storms a year and I would like to be able to use my BX24 now instead...

Anyone know what the lift capacity to full height @ the pivot pins are on the BX24 with the LA240 loader is? I'm trying to compare specs with different machines and I can't do a fair comparison if I'm not comparing apples to apples. Thanks!!

I just did my 50 hour service today on my BX24. When I purchased the tractor over a year ago I asked to include everything I needed for the 1st service so I could do it. Well...after returning the wrong filters (oil/hydro) this morning and picking up the correct ones I started the engine oil...

I just started looking for a sub-cut and my 1st stop was at a Kubota dealer today. I'm planning on looking at other makes over the next few weeks too. I was given a price of of $13,500 for a BX2350 w/ FEL and 60" Belly Mower. The BX24 without the mower was just under $16K. These prices don't...

I have never removed the BH from my BX24 or used the 3PH. The other day I engaged the wrong level which lifted the 3PH lift arms all the way up, I could hear the pressure load up as they reached the top of there swing. Once I realized I had the wrong lever I backed off and tried to reverse the...

I know Kubota says it is a Cat 1 but is it really in all aspects, or is it partially a Cat 0? I ask because I haven't taken my backhoe off yet to assemble the 3 point hitch and notice the Cat 1 top link sold at TSC is way longer than the one that came with the tractor... I have some 3 point...

I'm having problems re-attaching my 54" MMM to my BX24. This is the first time re-attaching so I must be missing something. I get the PTO on with no problem. My problem is getting the rear links attached - I can get one on but not the other, or vice-versa. Looking at the links a little closer...

The manual for my BX24 seems to say take off backhoe when using MMM, does it really mean to remove the backhoe or just disconnect the hydraulic lines?

Just wanted to know what type of fluid to use in the front axle case. Do you use the UDT or GEAR Oil SAE 80 or SAE 90. Or could you use either or? Thanks Alot.

I have a Wallenstein thumb on my BX24, and as others who have this combination know, this can lead to some mangled hydraulic adapters on the cylinder for the bucket. I don't have a welder, nor do I know how to weld, but I'm taking the tractor to my father-in-law's house to have him weld a stop...

You guys did a great job with the tips on trench digging. What kind of advice do you have for removing stumps? I have taken out some small stumps that the hoe could easily break the roots and some rotting stumps that broke apart as I worked on them. I am now getting to the 30 inch stumps with...

I have come across a small for lift boom that I am going to configure to hook up to the back of my BX24. I don't plan to lift the moon, but for the price ($300) I think this will be more flexible an option than using adhoc forks on either the FEL or using the 3-point hitch especially since the...

Have about 25 hours in on a new BX24. Been a great machine so far, sure beats my previous pick'n'shovel method :). Anyway, I've noticed a leak in the hydraulics and couldn't quite figure out the source as the sleeves tend to soak up the fluid and mask the source. Pulled all the sleeves off and...

Today was the first time I have gotten around to trying the plow (http://bluebirdmeadowfarms.blogspot.com/2007/07/just-what-i-needed.html) on my tractor - or my brand new disks... (http://bluebirdmeadowfarms.blogspot.com/2007/08/while-concrete-dust-settles.html) with my BX24... up until today...

I have a question for anyone who has a BX24 or knows how the BH works. I recently just purchased a new BX 24 with a MMM. The one thing I noticed when working the BH is that if I am curling the bucket, retracting the main boom and retracting the lower boom, almost every part slows to a crawl...

Yet another newbi question: Is the PTO speed on my BX24 dependant on the trottle/RPM level? I know the rear PTO is rated at 540rpm and the mid at somewhere around 1500-2000(?). Also, some tractors seem to have a way to vary the pto speed according to the implement... Is this the trottle? Thanks.

Hi to all, for the past week I noticed that my BX24 was cranking over much slower than usual. Tonight when I went to start my toy it wouldn't start. After looking things over I noticed that the main lead at the alternator was rusted and loose. I cleand up the lead, tighted it up and it started...

Well, after lurking for a while and researching whats' out there, I bought the BX24 and a bunch of toys to go with it. Thanks to everyone here - the numerous comments and discussions were invaluable in reassuring me as to the quality of this machine. Everyone around here drives "big" blue...

It's not the LOUD POP I heard tonight when I stood up to get off... that's for sure... frackin fenders...

The throttle is slipping on my new BX24. Is there an adjustment somewhere that I can tighten? It drops back, not the the other way around.

Hello all, Just about ready to pull the trigger on a BX24. I've been looking to replace my old 4x8 landscape trailer with something bigger. I guess this is my opportunity. I've been leaning towards a dual axle 6x14 landscape trailer. The question is, will the BX24 fit on a 6x14 safely. I...

Have only logged about 10 hours since new. Generally happy with the machine but a couple of little things are getting annoying. First, while using the backhoe one of my boom control sticks went dead. Just flopping around. Took off the surrounding metal shrouds and it turns out a cotter pin...

Who is making thumbs for the BX24? Web site? Price? THanks KC

A friend of mine today suggested that I get a quick hitch setup for my bx24. Of course he has a BIG tractor so had no idea where to send me. Any bx24 owners done this before? What about drawbars? I'd like that too as lining up my roller is quite a pain in the ***. Also, I have a bent screw...

My baby is sick!! I have 100 houres on my bx24 and it seams that my transmission (pump) is getting noisyer by the hour. I saw my dealer and I was told ( that's ok ,there all noisy!). This is my first Kubota but not my first hydrostatic. When I first start it the noise level is tolerable but...

What's the biggest disk setup out there for a BX24? I know the rule of thumb for ground engagement is the width of the rear... but a disk is a little different beast and can go bigger... Anyone running a 5' setup in sandy soil with some rocks? What about a 6' setup? Whatca got? This would...

A question about sizing a rear-mount rotary mower for a new BX24. I'm planning to buy the tractor in the next couple of weeks and am looking at attachments. Way more fun that your average hardware store :D The tractor will be for a couple of acres of rough pasture on a slight slope with...

I got my old cab from the BX22, (Curtis, which I had to modify for the BX22) & remodified it to fit the BX24. I bit more work this time around. I'm not sure if anyone is making a factory one for a BX24 yet, but here my version. Hope this helps someone. Richard

I am selling my 2006 BX24 with 160 hours. Need some advice on what I should be asking for it and where to list it. If it matters the machine is always stored in a heated garage. Thanks much. Joe

I've had my 24 for over a year, and yesterday finally opened the 3-pt hitch box just to try it out. The directions were actually easy to follow and now I'm dying to buy/rent/use any 3 pt attachment. The only thing that I was confused with was the top link. I assume that the metal plate thing...

Hi group. I took my backhoe off tonight for the first time. It was pretty simple. I then put on the 3pt hitch so I can do some grading this week. But, one problem. There are two large spacers that appear to go on the lower arm bar on either side. They lock into the tractor frame in a...

In a few weeks, I will have to dig a 200 foot long, 12 inch wide, 12 inch deep trench to hold PVC pipe which will hold various coaxial (communications) cables from my radio shack to my tower. Any tips on how I can do this easily, quickly, and neatly? Thanks

I must say that I'm surprised that my BX24 doesn't have a transmission temperature gauge. Has anyone ever added one? My old 70's Wheel Horses have such a gauge, in addition to hour meter, engine temp, oil pressure, and a voltmeter. The Kubota's kinda weak in this area. I'd especially like to...

HI EVERYONE, MY MISTAKE WAS SHOWING MY WIFE HOW TO OPERATE MY NEW TOY! THE ONLY TIME I GET TO PLAY WITH ANYMORE IS MAINTENENCE .IVE HAD MINE FOR A LITTLE OVER A YEAR AND HAVE NO COMPLAINTS.SURE BEATS THE HECK OUT OF CRAFTSMAN LOL! .

Hi, This is my first tractor, and I have a flat tire on my front left. This tractor did not come with a wrench to remove the flat tire. Can anyone tell me what I need to use to remove the tire, and which direction I am supposed to turn - is it counter clockwise? Also is there an electrical...

Hi, I'm now going to try to post video. Here goes..... Video of First video of BX24 - Photobucket - Video and Image Hosting Emil

I have a BX24 with about 102 hrs on her with a 60"MMM. Any thoughts of what is a realistic price to ask? moving and need a bigger tractor. :cool:

I'm looking to trade up from my BX 24 to something that will be a little stronger/quicker for snow removal, rotary cutting the 3 acre meadow three times per year and various backhoe projects. I would still like to use the new tractor to cut the 1 1/2 acre of grass around my house and plan to use...

My BX24 is going in for it's 100hr service and I want to take care of all the recall and service bulletins when I'm at the dealer. I know about the seat recall (PIB-2007-027) thatnks to this site and the fender reinforcement kit service available (service bulletin # unknown). Anyone here know...

When I was checking the oil on my BX24 today I noticed that the label on the engine says "BX23". :eek: What gives? Jeff

Is the hydro fluid used in a late model 2006/2007 bx24 the UDT named product. Do you use standard or Super? thanks

Hi all, The tractor was delivered last Monday and I've been on it every day. Moved 60yd of topsoil in 2 days and spent the rest of the time shaping and re-contouring my backyard. What a great machine!!! Be gentle with me, I am going to try to post pictures now...

I had my backhoe out for the first time this evening, and it was a pretty shaky first attempt. First, I when I plunged the bucket into the soil, many times I'd skid the tractor backwards on the outrigger shoes. What am I doing wrong? Too much of a load? Secondly, it's real easy to whip the...

I am picking up my brand spanking new 2007 BX24. Only option I am getting with it is the backhoe thumb. I am paying $15,800 (not including thumb, which is $395) and taking advantage of Kubota's 3-year, 0 percent interest offer. Please confirm with me I am not making a mistake. It is a lot of...

Hi group. My BX24 I got last week has a defective tach/hour meter. I've contacted the service department at my dealer a couple of times, and haven't gotten any calls back. So, I'm thinking of just asking them to get me the part, ship it, and I'll install it myself. Is there any reason not to...

I finally got a chance to get out to the tractor and install the grip/battery screen and step kits. The grip and screen kits were so easy they aren't even worth mentioning, though the throttle grip was kind of a pain to get on. It took a lot of twisting while forcing it on. The battery screen...

Just as the title states...... has anyone used a 16" bucket on a BX24 backhoe? Im considering one but it has to be built. I know on hard clay it wont do very well but Ive ran into a few times where the ol 12" bucket just isnt enough and a small hole turns into a small hole that takes forever...

I just took delivery of a BX24 Friday. While using it on a slope uphill from the lake it started to get away from me. On one occasion the fel hitting a tree stoped me. I was changing from high range to low to accomodate the low speed manuevering about to take place. Several other instances...

Prices qouted sor far: BX24 w/60" MMM Austin dealer: 17,400 In stock delivered. Visited dealer in person. Waco dealer: 17,300 August delivery. Visited dealer in person. Victoria Texas dealer: 16,600 in stock. Quoted over the phone but very friendly to talk to. Will deliver for fee, but I'll...

It's either a problem or I'm doing something wrong. When I shift the speed to high range, The transmission bogs down like it's under a heavy load, but it barely moves. It runs like crazy downhill, but if you turn it around and start uphill, it will not go at all. The tractor was just...

Anyone know the weight of the BT601 BH on the BX24? Jeff

I will keep it brief and let the pictures do the talking. Needless to say I am excited. On my way home my wife called to say that the tractor was in the driveway 30 minutes early. The next 10 minutes until home i was giddy with anticipation... Pic 1- Familiarization Walk-thru Pic 2- BX24 in...

I have a nice new BX24 at home now, and while I absolutely adore the thing and can't wait to get the **** out of work today, I did learn about one little detail that I'm disappointed in. But I almost think that this may be the norm on tractors these days. The thing is that the way that the...

Still on the hunt for a SCUT or CUT. Went to the dealership to play, i mean, inspect the BX24. The backhoe seems a little jerky to me. I guess with the size of the pump you can't multifunction. I tryed to bring the bucket down and to the side. It will only perform on function at a time. Is...

Hi all. I need to fold my ROPS to get my tractor in the garage. I couldn't get it to move, so I read the manual to verify I wasn't supposed to touch the nut and bolts at the joint, and after confirming that, used a mallet to help me fold it down. I got it down, but I won't be able to get it...

I got my BX24 today. Neil from Messick's in Lancaster County, PA delivered it. He was very friendly, knowledgeable, and helpful, and I'm very happy that I got it from his company. Here are some pics from my first day with it. 6767 = Had to just laugh that the day finally came. 6781 =...

New owner here, having just taken delivery last night. I have this thing about leaving equipment outside and would like to store the FEL out of the weather when I'm not using it. If I leave it on, I know I'm going to eventually rip the siding off my house, or run it into a tree while mowing...

My BX24 is coming in a few days, and while I imagine it comes with a standard owner's manual, am I correct in assuming it won't come with a service manual? If not, I'll have to order one. Is there any other literature I should get to accompany my BX to make sure I have all the information I...

My BX24 will be delivered in about 84 hours :D and the more I read, the more I think that I should be ordering a thumb. I have many, many piles of dead trees around my house from when my house was built, and getting rid of them will be one of the first jobs I hope my BX can help with. So, I...

Do you think this tiller is too large for the bx24? Taylor-Way 3-pt hitch Rotary Tiller 48" cutting width 0 to 8" cutting depth Made for use with 20 to 35hp tractor with Category 1 3-pt hitch Weight: 553 lbs. Approximately 4 yrs old Less than 20 hrs of use Sells new for approxomately...

I'm lined up to buy a leftover BX24. I need to know after what tractor serial number would the manufacturing change/fix would have been implemented. I'm hoping someone who knows they have the new changes on theirs would post up the serial number. The one I'm suppose to buy is 55633 The...

I'm lined up to buy a leftover BX24. I need to know after what tractor serial number would the manufacturing change/fix would have been implemented. Thanks Eric

Hi group, Well, I ordered a BX24 today, and it should be coming next week. The only add-on I opted for was a toothbar for the loader. Does anyone have any last-minute things that you'd recommend that I add at the last second before it comes if it's still possible to do so? I've read some...

I got a good price on a bx24(14950 delivered) and a good deal on a changed mind unused 60" deck $1250. Drove to dealer in the boondocks to check it out. Seems he got it from another dealer in south central VA i think. I assumed he was getting from warehouse when he said he was having one...

Heres a BX24 for sale just EAST of Atlanta, GA. I don't know the guy but saw his listing. Trailer is available. 2006 with 25 hours 13000. Looks like a pretty good deal. 2006 KUBOTA BX24 For Sale at TractorHouse.com

Here some pricing for anyone shopping a bx24. Just ordered a '07 bx24tlb with the 54" fine cut deck. 14950 for the bx and 1550 for the deck. 100 doc fee. delivered 36 miles one way n/c. all prices before taxes. Most dealers are quoting 15500 for the bx. This dealer still made money...

Hi group. Does anyone happen to know what serial number (and up) on the BX24s are the ones with the fix for the often-cracked fender? Or, if not, how can I identify a BX that has the fix in place? Do the ones that come from the factory already fixed just have the same bracket that they...

Hi, anyone have any tips for getting a pin out. it is at the top of the mount of the backhoe to the frame. has a t pin that freely slides. on one side you slide the t pin and just pull the 1" by 5" pin out. on the other side i can't budge the pin. i tried wd 40 and hamering on it...but it is in...

It looks like I am just about there. Going to go Kubota BX series, the only decision left is BX2350 with FEL and attachments or the BX24 and attachments. I sure like the idea of the backhoe and can see uses for it, but there is the extra cost at this point. I could add a Woods later but that...

BX24 owners .... Could you please share some comments regarding the MMM. [1] How easy it is to remove the MMM for cleaning and blade sharpening. [2] How well does the mower cut wet grass? With our rather unimpressive riding lawn mower, I can only cut the lawn when it is dry. [3] Is there a...

Hi group. I'm approaching the day of getting a BX24, and I'm wondering what optional features anyone can recommend I either insist on or dismiss as unnecessary. I'm not talking about optional implements and things though, just features specific to the tractor. For example, I remember reading...

Here are a few pictures of te new tractor. Had her about a month now, just did the 50 hour service last night. I now have 53 hours on it. It gets a lot of use mowing, the Mrs mainly, andI have done a lot of dirt moving/digging/landscaping with it. I really like this tractor.

Hi guys, Maybe you guys can help me.....What I was wondering is, if my BX24 came with the wrong tires??? Ok, here goes.....My right front was a little low, so I looked on page 50 of my owners manual for the proper inflation numbers.....Here is what it tells me: Turfs Front...

It's almost feel like it, I hate to see the old girl go BX22. The 800+ hrs I had with the BX22 where amazing. I can only wish the BX24 gives me the same long term results. Now to show off the bride to be.

Here is the little project we did two weekends ago, a paver sidewalk I would not have wanted to do it without the BX24! Here are the pics: Before: During: Senior Tractor Operator in Training: All finished: another view: The BX did a great job digging the hole, bringing and rough...

Hi group. I've read many owner reviews of the BX24, and a common complaint is that the plastic operator platform floor cracks on the left side rather easily. Supposedly, Kubota is supposed to come up with some sort of add-on support bracket to address this issue and supply it (and install it?)...

Hi group. The ground where I live, Chester County, PA, is rather hard. Piercing into it with a spade often involves my jumping up and down to get a full scoop, and I weigh about 170 pounds. I imagine it's hard to say, but would it be beneficial for me to go with an 8" backhoe bucket on a BX24...

I'm going to potentially need to transport a BX24 next month, and I don't think that my 95 Dakota is really capable of doing it with its 8000 pound GVW rating. I have access to an 02 Lincoln Navigator, which I believe shares a chassis with an F150. This vehicle has a 9,000 pound GVW rating...

Thought I would post this for anyone thinking about getting this. Picked up the kit at the dealer yesterday. Apparently this is the first one he's sold for the 54" deck with the new design. I didn't know it at the time I bought my tractor but apparently this deck was new for 2006. There...

When mounting my FEL last time I caught the front of the bucket against a pallet on the floor and pushed the right "arm" out of line. Now when I try to mount the FEL I have to push the right side in with my foot a bit to get it to line up when the left side is over the bracket. Anyone know...

It's been just 8 months now since the purchase of the 24 and much has been done. I don't know what we would have done without this little machine, it's been a huge time saver. The attached photos show the 75' by 75' 'deer pen' the owner had built years ago as it looked in the fall, and now as...

Is there a clear consensus as to which PHD is prefered for the BX24? And, is the PHD a PTO driven device or a hydraulic driven device? I believe the hydraulic approach allows for going in reverse whereas the PTO approach does not. Our NH soil is very rocky and root bound. I think I would...

Anyone else had any problems with their hour meter? My machine has about 210 hours on it and all of a sudden I noticed that the hour meter says thousands of hours now. I have not called the dealer yet, but for the machine to have that many hours, it would have had to be left running without...

Well today I put my 1 month old BX24 thru the paces and it did great. I could not ask more as the tree stump was 17" across at the base. I cut 6 roots with an axe and BX did the rest. Not sure of the weight of the ball, but neighbor and I got a chain hoist block and tackle and got entire tree...

I've been working the ol' BX very hard this week and I've begun to wonder if I may have lost a part off the bottom. Specifically, one that holds up the MMM bracket. I can't remember how the whole apparatus looked beforehand, but now it seems to hang down a little. I don't have a MMM so I'm not...

Recently purchased a BX24. 14 hours on it and I love it. In the market for a Rake. My local TSC has a King Kutter XB 5' for $399. Questions: - How long is it going to take me to remove the BH? - Can the rake element be swapped with a moldboard blade element. Can you purchase just the...

Anyone recommend a size? I have a large section of our property to clear and level, and I'm thinking the box blade is the best bet. I didn't realize how lumpy it was until tonight...it was previously used as a deer pen by the previous owner for the last 10 years or so. The soil is fairly hard...

Hello all, I'm a new member but I've been reading the forums for a long time doing my "homework" on a tractor purchase. Just bought a new BX24, Post Hole Digger W/9" auger, 60" Rear Blade, 48" Box Scraper, 48" Rotary Cutter, Toothbar, and a fancy orange Canopy. After reading all I could...

I have about 50 some hours on my Bx24 now --- find all kinds of uses for it, moving dirt, boulders, carving out a walking path, etc.... I bought the Bro-Tek thumb and installed that and use it for lifting rocks -- nice tool. I also bought the skid plate, but I am having problems loosening the...

I am new to the forums, and have been reading for a couple days straight on tractors for which one I might fit my needs. As of right now I am leaning towards the BX24, still researching, but have a question. I currently have a Big Tex trailer. It is 5x14 and can handle 3000# and if I use this...

This may seem a bit simple, but my new BX24 manual stops short of explaining how to change out the BH bucket. Looks like a mis-print. If anyone can share some thoughts on this as I have not done it before and want to do it right. Got a 12" and may want to put on an 8" for a trench.

I mounted the Brush forks today and put them to work. Worked great and saved alot of wheel barrow trips. Turned a 20ft hazlenut bush into three trips to the fire pit. Tomorrow dig it out. Should have bought a Kubota years ago. :p

First project completed. I made the Brush forks to be easy to slide on and fasten to bottom of FEL. Painted them today. Over weekend project no. 2. put chain hooks on bucket. Here are some pics. Forks came out nice...hope they work as well. Got some big brush to start removing from beds...

Kubota increased the angle of departure to 20 degrees for rotation backwards with the backhoe installed. I have been unable to find the angle of departure for side rollover with implements, backhoe and FEL no mower, installed. Understand it all depends on amount of material in the FEL, height...

We uprooted and moved a split rail fence that was previously installed directly behind our house. My father in law and I spent all day yesterday 're-planting' the fence to d-mark our property along the one corner. I still have another 100 to 120 feet or so to run along the woodline in the back...

Could it maybe bulldoze large wild rose and other fence line varmits better and faster than backhoeing them and then using the loader? The mini dozers are quite a bit heavier than a BX24.

Well, I am new to the Forum today. My BX24 arrived at 6am this am and I have had a great day with it. Moved 3 tons of top soil, dug a trench and took rocks out of new planting beds. I rally like the BX 24 and am happy with my decision. Took me 58 yrs to get my toy, not really, as it is a...

I have had it a week and I removed a 42 inch stump. This stump was all that remained after a tree fell and the tree company wanted $1,500 to remove it all. It was about 3 foot tall. (Tree fell in a storm and I was able to handle the tree with my Stihl chainsaw but the stump was another...

Has anyone found a design for the installation of forks in place of the FEL bucket? I am looking for a design that requires the removal of the FEL bucket and installation of the forks. Reason is to improve the ability to lift by eliminating the bucket weight, improve visibility of the load...

Well, here is a shot of the new BX24 after its first bit of work.