I will use this thread to document all the hydraulic additions to my 2520. I will append as I get stuff done enough to show it. I wish to show enough detail so someone could follow along if...

I was clearing brush for a new neighbor with my 2520 (160 hours) when I heard a pop and gushing sound. I shut down the tractor and checked out the back, where I found hydraulic fluid gushing from...

My wife and I bought a new 2520, FEL, 62d deck in June 07. After about 1hr of mowing I noticed the right rear tire had a groove in it, turned out that the dealer did not put the wheels in the wide...

Hi all. My gas cap doesn't clear the hole in the hood very well. The cap is pressed tight up against the hole in the hood towards the front of tractor. Slight bend in hood from this. I don't...

Okay, we're in the middle of summer, but I'm already thinking about winter. I just purchased a new JD 2520 with a 61" FEL, R4 tires (no filled tires), ballast box and I'm interested in hearing...

Hello to the group, this is my first post. I will be pulling the trigger next week on a new tractor. I have done a lot of reading and comparing stats. It痴 down to two tractors?D 2520 and Kubota...

Hello, This is my first post and I come to you in the middle of a blizzard with a problem . Our John Deere 2520 bucket will not lift. It will curl and drop but not lift. You can hear the SCV put...

started pricing the JD 2520 because of the quick change bucket (FEL) and other quick attach implements, tractor with R4, 62" MMM, 200CX loader is $18,500 (before any taxes). Then of course I had...

I recently purchased a new 2010 JD2520. I have read the owners manual regarding the startup procedure, but it really doesn't address my question. In the warmer weather, I just turned the key...

Recently purchased a new 2520. One issue that I have with it is that the removable pins to fold the ROPS down are so miss aligned that there is no way to put both sides back in. My local dealer...

I went to my three closest dealers (JD, Mahindra, Kioti) and told them I could pay max $20K cash for a machine and that I wanted the most tractor / loader I could get for that price. The three...

Santa came early this year and so did the snow. The weatherman was calling for some much nicer weather than this. Anyway, I got the tractor with the 200CX Loader, the 46 Backhoe, the 54" Blade...

kinda decided on these two tractors I would appreciate anyone who has been looking at these two to let me know how you came to your decision. dealer suppoert is not an issue as they are 2 mi...

I recently acquired a 2520 with a FEL and rear blade. As spring is just around the corner (previous snows have melted so hopefully no more), I am contemplating my next attachment - a PTO wood...

Hello, I've been lurking and reading but decided I need to sign up and ask some questions. I have narrowed it down to two tractors. A brand new left over 2013 john deere 2520 with loader/bucket...

Just bought a CMI tandem trailer. Have had it welded in places where the production welds were limited. Now I am seeking a cylinder and control for the tractor. I don't know much about cylinder...

I have a John Deere 2520 that I had to remove the charge pump and valve block to replace the transmission input driveshaft that couples to the engine due to the end of it breaking off after the...

When I purchased my property several years ago and well before I bought the tractor, I thought that a DR 4 1/2 inch chipper would be a good purchase. Well it is underpowered and the feed hole is...

This board is great -- I've learned so much about CUTs during my search over the last few weeks. I think I've narrowed it down to two different tractors: Kubota B3030 or the JD 2520. Intended...

Hi All, I have a 2011 JD 2520. Following the 50 hour service I noticed a light "tick" noise coming from the front of the tractor. It is not a loud knock or lifter sound rather a soft intermittent...

Hello, I was looking at the JD 2520 and was wondering for comparison, what is the comparable size in the Kubota series? Thank you

I hooked up my snowblower a few weeks ago and noticed that it is always spinning, even with the pto switch in the off position. This is the first pto attachment I have used since the rototiller in...

I have a JD 2520 that I absolutely LOVE, but the only tire options were R4's and Turfs. I need to find a set of Aig or R1's for it, because the R4's on it do absolutely nothing in soft stuff...

I have 10 acres, finish mow about 2 acres, "rough mow" about 3 acres, garden of 2 acres. I have a Case 530 ag tractor i use for fall plowing, discing, prepping garden. Had a JD317 lawnmower but...

Got my kit today and took some pictures of the kit. I will install it next week hopefully, will take more pictures. Stay tuned!!

Hi All, Check out my Bucket Hook mount with receiver that I came up with for my 200CX loader on a JD 2520. I'm hoping this makes the simple jobs easy now to pick up / move with the loader... I...

Does anyone have an opinion on a PHD for a 3PH. I have read in the treads that they either work well, or they are a waste of money. I have to put in about 100 fence post at my new house and I was...

I think I have narrowed down my search and it is between those two. I will first explain what I want to do. I will be mowing about 3 acres all the time. I will also use the tractor to haul...

I just got a quote yesterday for a new 2520, 200cx fel with 53" bucket and hood guard, and 62D mmm with independent lift - no addition hydraulics as I plan on adding my own. Dealer quoted $19,100...

Hello - I am new to this forum (first post), so let me say, what a great resource. I have been reading around here for a few days, and feel ready to ask my questions: My wife and I purchased 12...

Newbie here - I purchased a JD2520 a year ago and now falling into the abyss of what other attachments and toys I can get for my little green monster. My question - I am considering a backhoe and...

I am real close to purchasing the JD 2520 with loader, backhoe, blade and box blade. The dealer worked up the quote in MSRP which I verified, then discounted it by a little over 12%. That seems...

Just ordered a JD 2520 today to replace my Kubota L175 (ad in classifieds). I can't wait until it come in. BTW incasw an one wonders I ordered a 2520 with 200cx loader and 62d belly mower for...

Went to use my tractor this morning the " joystick " was very stiff to move and the FEL would not raise up, hydraulic fluid appears to be ok in the sight glass. It was working fine when I parked...

Snow Storm Today Snowblowing with the John Deere 2520 & Bigtoolrack for Counterweight Well we did not get what was expected today but I thought I would post this video of the clean up.... Looks...

My first brand new to me JD. It's a leftover 2010.Came with a grader blade and finish mower. 27 hours on it now. I'm impressed with the power this tractor has. Any tips on maintaining, operation...

I finally made a decision and purchased the 2520! 200CX FEL, 62DMMM, Wood Box Blade, I-Match, 46 Backhoe(when it arrives), 54" snowblower! I spent alot of time on TBN looking at various topics...

On ebay now ending Sunday afternoon is a 62D ON Ramp drive over deck and 54 inch hydraulic front blade for 2520 and small 4000 tractors

I bought a Countyline (SpeeCo) PHD with the 12" auger from TSC for my JD2520. I raise the 3ph up until the PHD arm touches the back of the tractor but the auger doesn't clear the ground. Any...

Received a price of $14,700 on a new JD2520 tractor, Plus $2770 for front end loader (CX200), and $6,390 for JD #46 backhoe. I would be trading in my 2007 JD2305 (110 hrs.) , with CX200 loader...

Not a true review but here it is anyway. A fellow TBN'r sent me a private message with questions and here was my reply. Thought maybe it might be useful to someone... Ok... here we go... 1. How...

I have a JD 2520 almost ready for delivery in a few weeks. I was wondering if there are any special tools or "time saving" tools you would recommend to have on hand that will make owning this...

The mower discharge guard was the first thing to come off. This is my third tractor I have removed it from.I haven't broke a window yet and no neighbors to worry about. I noticed the hydraulic...

I purchased a new John Deere 2520 compact utility tractor last fall and was wondering if anyone is having the same problem with this tractor. The front right axel leaks oil (MFWD) and is in for...

2011 JD 2520 I was out tilling today, going along no problems and the tractor just died. When I turn the key on, nothing on the dash comes on. No glow plug light. No fuel pump noise. Fuses...

I had something weird happen today to my 2520. I noticed that during a throttle up it kinda hesitated bucked...some smoke and then went to the set RPM. It has never done this before. It has...

After waiting 2 months, I finally got my new 2520 this weekend. It has the 200cx loader w/61" bucket and 46 backhoe. Put about 3 hrs on it so far, mostly "feeling" it out and learning to use the...

I'm looking to buy a 4WD tractor to landscape my house - just can't stomach paying $70-100K to a landscaper. Figure I can landscape for $20K in materials + the tractor cost over a year (and quite...

Here they are pictures of my new tractor:D

I have a 2008 2520 that I use for plowing snow. My drive is 600 feet with 150 being asphalt and the remainder stone. Currently I'm plowing this with a FEL and 4 foot 3 point hitch blade. I'm...

Have about 10 hours on my new 2520. When I turn my key to the ON position, the manual says you will hear the "engine fuel shut-off soenoid engage with a click". I get a constant clicking sound...

Hi there - I am considering getting a rotary broom for my 2520 & have a couple of questions - Which model allows for hydraulic height adjustment - I know both will angle using hysraulics, but...

I was very disappointed with the stock deere 54" snowplow. So I set out to adapt a Meyer's 8ft plow. The plow was old and pretty rough. Challenge accepted.

I just added a two spool hydraulic valve to my 2520. i tapped into the ports behind the scv block like i have seen on this website. i put the plug in the block. all is working, but the valve...

I just finished mowing (about 4 hours) pulled the tractor in front of the barn to let it cool off. A couple hours later I went to start and it would not crank. I will do my best to describe what...

Basically this is a 'if anyone here today knows a reason these two shouldn't be wed' type post. I gave the Kubotas a good look/ride but in comparison I really wasn't impressed. (from all the...

hello my 2520 going up my driveway with snow and ice .will either spin or the tires wont turn at all.whining noise not nough power?pedal hard to keep floored.this tractor cant be that underpowered...

Attended our Spring Farm Show in Edmonton this weekend and checked out the new tractors. I love my Deere products but a dealer from Saskatchewan had the 15 Series Mahindras on show. Kind of...

Anyone have an opinion. I know the B7800 is a more powerful machine, and at my local dealers about 1k less. Any input why I should go w/ the Deere? Thanks.

Ok I'm very close in pulling the trigger on a tractor. So here's my dilemma. I have 2.5 acres that I mow and have light front loader work around the place. I'll be building a storage barn next...

I'm new here and I'm sure its been done before. I'd like to build a winter cab. Anyone have pictures of a completed cab. I have a good idea of the shape and materials needed.

I have been monitoring the forums for a while but this is my first post. I have a 10 acre property that has about three acres of mowing. I use a Deere x304 for this job as there are many trees to...

I have a new 2520 on order and have asked my dealer a question and he really isn't exactly sure of the answer, but says he will get back to me. Maybe I can get a quicker answer here. The tractor...

Hi all, So I'm a first time poster...read some threads thus far and decided to post a question. The 2520 is my dads tractor (just bought) and I know he wants a snow plow blade for it, only thing...

kinda decided between these two tractors anyone who was looking at these two what made up your mind saw the jd today definatly like the pedal arangement better prices are almost the same for fel...

About 2 weeks ago, we took delivery on our 2011 2520. Like many others here, we took advantage of the $2500 promotion and signed the papers on May 31. The 2520 was on the lot and if it had not...

Had some close calls in the last few years using the forks w/ FEL handling wood. A few branches snuck past the factory guard and dented up the grille. Was able to bend back though; that's a $450...

I have a JD 2520 tractor with a JD46 backhoe and need to switch the rear mount for the 3 point hitch and the rear mount for the backhoe a few times each year. When I installed the backhoe mount...

anyone with knowledge , please help!! Bought a John Deere 2520 last year, from out of state. (got a great deal, and didn't have to pay taxes in PA). My tractor has only 35 hours on it, and I...

Hi all, Got a question. I have a John Deere 2520 with 4 hydraulic couplers for the FEL. Now I want to use a trailer with lifting cilinder. That one has only one hose and it drops by gravity. Are...

What trailer do you tow your JD 2520 with? I am thinking a 16' ( 14' w/2' dovetail ) would be fine for the tractor with loader and tiller based on measurements. Just not sure if it is long...

I needed to remove two septic tank 5 ft. lids. I borrowed a boom pole hoping to remove them with my JD2520. No dice. The lids were too heavy. They wouldn't budge an inch. I have a 9.5k winch...

Hi Guys, I have been looking at compact tractors for a while and kinda like the 2520 machine but hate the seat. I know a couple guys changed the seat configuration and one in particular put the...

hello, My wife and I recently purchased 6 acres. So now I'm tractor shopping. I am planning on making a small motorcross track(8-12 jumps), grading a 350' driveway, brushogin 3 acres couple...

This will probably be the last thread before I decide to purchase a jd 2520 with a 200cx and 62D MMM. Also the tractor will have wheel wieghts and a BB. What does everyone use their 2520 for. I...

I just tried the tractor in the snow for the first time and the front wheels spin and slide on the smallest incline. I have R4's rears are loaded and they were fine. I was pushing a small amount...

Hi bought my second john deere went from 2305 to a 2520 because of my ex. hmmm thanx i think i forgot to thank her. i have pallet forks, waiting on a 54" box blade thru everything attachments...

hello i just purchased a 2008 2520 and on a cold start the glow plug light (or pre heater light) only stays on for a second or less but the ticking sound from the engine keeps ticking as long as I...

I'm in the process of building a grapple for the JD 200 CX on my '07 2520. Does any one have some info on adding a 3rd hydraulic control for this? I've checked with 2 different JD dealers and...

Hi, everybody. New member, but have been checking out TBN for some time. I ordered a new John Deere 2520 w/200cx loader and BH46 backhoe a couple weeks ago. I have a tentative delivery date of...

I just bought a pj utility trailer 83" x 16' includes 2' beavertail to haul my 2520 and would like some input about how everyone secures their load. Pictures of a secured JD 2520 would be great...

JD 2520/2720 VS Kubota B2920 -------------------------------------------------------------------------------- I'm trying to decide between these tractors to buy. I have no previous experience...

Time is running out for 0%... I would love to have a Deere 3000 series, but realistically I am comparing and ready to pull the trigger on a 2520 or 3030. The 3030 seems like more for the money or...

I currenlty have the JD 2520 - I am looking for a backhoe attachment, aside from the JD 46BH are there any other compatible brands out there that might be a litle cheaper but still suffice. Any...

Hi Folks, I have a John Deere 2520 that I have installed a power beyond in order to use my Bradco trencher. The trencher has a Metro valve that is behaving as a closed center valve when I really...

Had my new Deere 2520 delievered yesterday....just in time too! Got about 4 or 5 inches of snow today. Took the MMM off this morning and went at the driveway with the FEL. I gotta tell you...

So I just got a Good deal on a complete set front and rear R3 Turf tires and wheels for my JD2520 in Mint condition for $800. I have Loaded R4s and was wondering if anyone has some tips on...

Hello Tractor Lovers! My name is Jamie Jones. I'm 48 and live in New Hampshire with my wife (no kids). I love using forums to learn and share ideas - I go to mapletrader (I make syrup) and...

Few pics... http://i33.photobucket.com/albums/d...00/100_0420.jpg http://i33.photobucket.com/albums/d...00/100_0414.jpg http://i33.photobucket.com/albums/d...00/100_0411.jpg...

Here are some pictures of my new Bearcat 73554 Chipper/Shredder mounted on my JD 2520. This unit is pretty awesome! Very well built, and it works the balls! The shredder and top 360 degree...

Hi everyone ... I'm a newbie who is amazed at the knowledge floating around on this site. I'm hoping some of you can help with a few questions I have. I just bought 9 acres - 7 acres of timber, 2...

I am about to purchase a 2520 with 200cx FEL ,62" deck ,ballast box and industrial tires ,also 3 pt quick connect i forget what they call it, just wondering what you guys think about these tires...

Hello all......I just registered on the forum, but have been following the posts in the CUT forums for a while. Seems there are a lot of very knowlegeable & helpful folks here, willing to share...

I just bought a new Explorer on Saturday with the tow package which includes the class III hitch rated to 5000lbs, transmission cooler and a larger radiator. If I bought an 18' Aluma tandem...

Over the weekend, I made a boom pole for my JD2520. Since I previously made a three-point trailer hitch and quick hitch adapter for the loader, I decided to employ these elements in the boom...

Hi I have a 08 JD 2520 with a trans problem. The tractor has 207 hours on it. Last year when it had approx 100 hours the PTO quit working. The dealer said it was a broken pin in the tranny. It was...

I am considering trading ( or selling outright ) my low hours ( 645 ) very clean JD790 / ags / power beyond/ gear / 419FEL in on a 2520 with 775 hours / hydro / FEL / 54SB snow blower. I would be...

Hi Everyone, Looking for some opinions. I went to my local dealer looking at the 2032r's. Worked out to be more than I wanted to spend. He showed me a 2009 2520 they just took in. It has 100...

Bought a used. 2007, JD 2520 with 84 hours on the clock, back in early September. Put a Curtis hard side cab, heat, work lights, radio, beacon light in the cab. Put everything in myself with no...

Has anyone experienced their power steering cutting out while going up a steep hill with their JD 2520 CUT? I noticed that if I drive straight up a steep hill my power steering will cut out...

I have seen on this forum that others have had the 2 year battery issue. Lately when I would try to start my 2520 it would act like a dead battery but would try to start. I would keep trying and...

I'm looking at both these tractors and gotten prices on both. Kubota B2620 w/FEL, Turf Tires and 60in mower = $17450 John Deere 2520 w/FEL, Turf Tires and 62in mower = $20487 Both have 0%...

I have a John Deere 2520 with an electrical problem in the starting circuit. Getting voltage through the ignition switch but died suddenly and won't start. Lights work but that's it. Hoping...

Hello to all, I live in Australia on approx 5 acres of mainly mowing land.I also have a few hundred metres of driveway made from crushed rock. I am looking for a fast way to slash...

Hi I currently have a JD2520 with a factory JD model 46BH. It's a straight boom 6.5 foot BH and for what it is does OK. However, for any kind of trenching work its kinda, well, not very...

Has anyone experienced an acceleration problem? I'll try and describe as best I can my problem. With the tractor in gear and the throttle set at 540 RPMS when the froward pedal is pressed it moves...

Hi all, i currently own a Deere X495 with the 62C deck and would like to upgrade to something bigger, although 70% of the time will be mowing about 1.5 acres of lawn. I have my eyes set on two...

I was looking at tractors last week and my local Deere dealer said there will be no changes to the 2520/2720 series. I thought there was going to be some subtle changes and a new numbering of...

My JD 2520 is about due for the 50 hr. service, which includes changing the transmission oil. I never did this before and was curious about how much transmission oil I should expect to pour out of...

I have jd 2520 with a200cx fel looking to get a trailer to haul it if i need to.What brand and size to you all recommend for this set up.I will be hauling it with a 2001 f250.Thanks

2009 JD2520....start...run ... Dies....hard to restart...restarts....runs...dies....tractor sits a couple days....starts right up...work it an hour...dies...hard to restart...runs 30...

Here's what I'm up against: I have a 2011 2520 that I bought new in 2011. It has the 200CX loader and 62D mower deck. It has 106 hours on it and all I've done maintenance wise is the 50 hour...

Just purchased the above mentioned unit and test ran it today. I am very satisfied with the quality of the product, and learned a couple of things. First, it's really quiet until you put a 2x4...

.....

Hello! First post. I am leaning towards purchasing a JD 2520. Where is this tractor made? Thank you.

My 2520 has a real sloppy feel to its FEL Handle. Its not a huge deal, but its annoying when you try and do precision work with it because you need to move it past all the "slop" before it starts...

My "old" JD 4100 had a special switch you could pull up when the seat was flipped up, to allow the rear 540 pto to run without an operator. This is nice when running a generator or wood chipper...

My John Deere 2520, I constantly find my storage hook for the center link 3 point hitch is bent open and will no longer hold it in place. I have bent the storage hook tight so the center link...

The other day I sent an email to JD about the three point hitch problem with the 2520. Today I received this reply. Dear Tim: We have a "fix" in the testing phase. Please keep in contact with...

Hi I have been thinking of purchasing a JD 2520 to help me manage (transform) 2 acres. Currently scrub with no grass but want to turn it the other way. Tasks I want the 2520 to do are: leveling...

After a long search I found a good tractor. Went to a dealer (180 miles away) and was looking at a 2001 4300 with FEL and 72" deck. Boy it was rough... But as I was leaving I saw a JD 2520 and...

Looking to purchase my first tractor. JD 2520 with 200CX Loader with 53 inch bucket, and RC Rotary Cutter with slip clutch. Dealer's price is $19,980.00 plus tax. This includes any JD incentives...

Hello everyone! I am a really new poster but come here often for advice and help. I own a 2007 John Deere 2520 with 400 hours and I am having trouble with the power assist steering. When the...

just thought i'd put a few finished pics up. I can't take much credit for the install, since jimgerken gave me most of the ideas and saved me a ton of money (on the power beyond hookups!!) i...

Good evening.. My apologies if this isn't the correct place for this or if it's already been asked.. I looked but didn't see the exact problem.. So here goes.. This problem also happened a month...

hello, i have a 2008 2520 i am at 50 hrs and want to service it. i am changing all filters and oils i have a question on engine oil my dealer gave me 15w-40 and said thats what they use in...

Hey all. Anyone added or know any information about a 3rd "Selective Control Valve" for the JD 2520 or 2720 compact tractor? I see in JD's parts website, that it is listed, but the dealer I ask...

Need help determining why all of a sudden there is no hydraulic pressure when I try to back blade with the 200CX loader mounted on my JD 2520 tractor. Bought the tractor new about 12 years ago...

Just finished my snowplow project. I have a deere 2520 outfitted with a 200cx loader. I purchased a used deere 375 blade assembly and cut the frame just behind where the cylinders are mounted...

Hello, I'm trying to put the two lift lines on and it appears over the winter the hydraulic must have settled in the cylinders creating pressure at the end and now I cannot get the lines on. The...

I am considering buying a John Deere 2520. The transmission has a high and low range (no mid range). I will be getting a 62D mid mount mower as well. My question is whether I can mow at a...

Yesterday I purchased a 2010 John Deere 2520 that came already equipped with a loader and backhoe. However, it did not come with a mower. I was wondering if anyone knew what all it would take to...

Hey y'all, Does anybody know, if a JD 2520 "Hi-Crop" uses a special Top-Link or the same, as any other 2520?

Talking about the s-cuts of course. I used to have one of the first years out and am leaning towards going back to one as we're going to have more property to maintain shortly. My questions...

Aloha, Anyone have/had a problem with their 3pt. hitch? After parking mine overnight, next day..3 pt hitch won't move changed the hydro oil and filter...still won't work. Front loader works...

I'm looking to find a nice 72 inch MMM for my JD 2520. Can I put a 7 IRON 72 inch MMM under it? Or can I only run the lighter version of the 72 inch MMM? I found a nice 7 IRON MMM and would buy...

i went to go buy a JD 2520 TBL the other day but they didnt have one on hand. sounds like the are discontinuing it . *What is gonna be the next generation of that tractor?* For the TBL with...

hello everyone im glad to be a part of this.i was a spectator for awhile this is a great site.my question is im new to tractors i bought a jd 2520.and i love it.though i was going up my driveway...

The manual I have for my JD 2520 shows a fuse block with multiple fuses and empty spaces. On my 2001 JD 2520 there is only a small connector with 4 fuses numbered 1 (10 amp), 2 (10 amp), 3 (15...

Just bought this tractor, so far I love it... problem is that I have front loader, and mid deck... well I paid for the extra lift kit for the mower so I could use my 3-Point hitch...

Hey there - Need some advice & knowledge....I am looking for a 3 pt tiller and came across one (JD450) however it's a Catagory 0 3 pt. hitch & I was wondering whether this is compatible with my JD...

I have read several threads via searching about adding 12 volt plugs. Alot of them talk about the location. I need to know if the bundle of wires behind the seat can be used to make this easy...

When I took my JD front mounted 47" snow blower off my 2520 for the winter today and put my JD 46 backhoe on I was reminded how much of a pita mounting the backhoe is. The JD dealer claims you...

Hi, I am new to the forum and I was hoping someone might be able to help me with a problem that I am having. I am attempting to post a tractor for a customer. I work at a dealer and we do...

Anyone have a source of wiring diagram for ten year old JD 2520 ? Don’t want to go into details but it has to do with the starting system. Paid dealer over two grand a couple months ago and only...

I have a two year old 2520 with 70 hours on it and from time-to-time the power steering just quits, or is hard to steer. What are the possibilities of what's wrong?

Just ordered a tech manual from JD to get a wiring diagram ( start/fuel circuits ) - but does anyone here have one for a JD 2520? Parts Department only has harness descriptions, service...

ive been looking at a previous post on this subject. basically the tractor starts , then immediately shuts down. from my research, its one of three things, 1 the fuel solenoid. 2 the v4 diode. 3...

A couple weeks ago, we had a nice day to get outside and do some clean up. The 2520 got some FEL exercise :) . So, I am wondering opinions as the to best use (other than firewood) of logs this...

If you need a John Deere 2520 Mower Deck - $650 w/Ind lift & stow & go I came across a killer deal on Craigslist for anyone that lives in or close to Freeville NY and or is willing to drive to...

Using rear cutter the other day and noticed a noise coming from engine. Lowered the RPM and disengaged the PTO to investigate an noticed smoke coming from hydraulic pump. Reved up the RPMs and...

Does anyone have any idea why the wet brakes on my 2520 make a loud high pitch squeal? Both sides will do it and it seems to go away if I ride the brakes lightly for 10-20ft. It will come right...

I found that quite often when snowblowing I wanted to increase engine speed to max for the deep snow parts, but otherwise wanted it running at 3/4 throttle for lower noise and wear. My right hand...

I have a John Deere 2520 with R4 tires, 200 cx loader the high capacity loader bucket and the regular, a drive on 62 d mowing deck that has never been used and only 137 hours, what is this tractor...

Good day all. I have the 2520 with the 200cx. With the quick detach of the bucket, are there any other attachments that will fit? someone told me last week that the mounting system was universal...

I have just installed a power beyond kit on a JD 2520 compact tractor. I just want to verify which port would be the pressure port and which would be the tank port?? Based on the sticker, it...

I keep having this problem with my 3-point hitch. It goes up-down no problem. I don't use it for a few months and then it's stuck in the up position. Nothing changed - I didn't touch the...

I am trying to decide which would be best fit for my JD2520 a RC 2048 or a RC 2060. I am leaning toward the RC 2048 any thoughts. You can get them with rubber front and metal rear guards or for...

ok, so im a die hard simplicity fan , sorta, I also like JD too. Ive had my heart set on a Legacy XL even though ive NEVER actually seen one in person yet or driven one. Dealers just never stock...

Hello everyone- I have the JD2520 and am in the market for a 3pt pull behind aerator..so far my search has landed me to the Trufvent product Coremast "52 pull behind. Has anyone purchased one of...

We have a Deere 2520 tractor with mod mount mowing deck . Just bought a 200cX loader. We removed the loader to mow the lawn for the first time. We attached the hydraulics but we cannot lower...

Finally ready to upgrade in size from my Subcompact tractor. Looking for something the size of the Kubota B series/ JD 2000 series. Eliminated the Kubota as the nearest dealer is too far away...

Well, the order has been placed... After much debate and already snapping pics of my kids on what was to be "our 2305" I chose to go for the larger tractor. Here's the order. -2520 w/ added...

As a new member to this forum this is my very first post....I want to say up front thank you all for the info here - it has been very helpful; and I also want to apologize in advance for what is a...

hi, i found a 2011 JD2520 i am interested in. 2600 hours. tractor only. what would be an approx value/price? also, says a 200cx loader fits. are those still available or what after market loader...

My neighbor has a JD 2520 which has a dealer installed independent (loader joystick controlled) mid-mount mower lift kit. It has worked well for 3+ years but now usual joystick movement to raise...

Brand New - To Forum and New JD 2520 Receiving John Deere 2520, 200CX Loader, RT1157 Tiller, BB2060 Box Blade and Bush Hog Auger first thing in the morning. Looking for comments and suggestions.

thanks all for the invaluable info you guys post on Kubotas and JD's. Extremely helpful stuff!

looking for a set of pallet forks for a JD2520 , i know i wont be able to lift much but i like to strap antique tractor parts to pallets after i dissasseble them and store them,it makes it real...

I purchased/ordered my JD 2520 Utility when they first came out. Can't remember the year. Tractor has 380 hours on it with few problems. My battery was original and I replaced it this fall...

hi, would you buy a 2011 JD2520 with 2600 hours and no FEL or MMM for $6000. i was thinking of getting it and buying an H130 FEL ($4000) to mount on it. that makes it $10k. run it till it drops...

Does anyone have this setup a JD2520 with a jd655 tiller. I am about to get the 655 and want to hear from some that have this setup so I will be sure this is the right setup or should I go with...

I am running a 2011 JD 252. From time to time I see used rear snowblowers, but I am never sure my 2520 will power them properly. I wanted to ask JD 2520 owners about their snowblowers. The rated...

I'm looking for a nice 72" MMM for my JD 2520. If you have one or know of one, please contact me. Thank you!:drink:

Hello everyone. I recently inherited the maintenance duties on my parents property after my dad past away. He had a Deere 2520 and an old Ford 8n (or 9n not sure). Anyway, the ford is not...

What is a good price, they said $20,000 for 2520 and loader, I offered $19,000. What are others getting them for. Wayne

Hello, More pricing or use advice please. I found a JD 2520 4WD, 200CX FEL, 180 hours, 2007 for $14,500. This seems like a reasonable tractor for us. Our place is 23 acres, most which is a field...

Hello, I am buying lights for my hood guard and am going to be using clamp mounts. Since my tractor is in my barn up in northern Michigan I need to know what size the tubing is on the tob bar of...

Had an intermintant leak where would see a couple drops under the front of the tractor on occassion, didn't always happen. Couldn't really see where it was coming from, made sure everything was...

Hello guys, I recently converted my Bearcat 73554 Chipper/Shredder over to be compatible with my I-match hitch. By doing so put the unit back about 4-5". Right now I am only getting about 2...

I have several large fields of bet. 3 and 5 acres that require occasional mowing. In the past a local farmer would mow for hay, but with his herd reduced in size no longer has need for it. I do...

I built this "cab" for the 2520 for snowblowing. It keeps the snow off, and shields me mostly from the wind. It is kindof open at the bottom where the material ran out of length, so my feet are...

I am going to sale this JD2520 and get a YM2210 and First Choice Finish Mower . Can any one tell me what i should ask for it. PTO Horsepower 61.29 or i would trade for a compact Tractor and Finish...

Hi everyone! I have a question on the JD 2520. If I were to purchase a 3 pt hitch generator does the 2520 have a governor that will maintain generator rpm's without having to constantly adjust the...

I bought a "service" kit from the dealer so I could do my 200 hour service on my Deere 2520. Changed the hydro oil, new filter, cleaned the suction screen (very, very clean this time around)...

I used the post hole digger earlier this summer and unmounted it when done, leaving the 3-point hitch all the way up. Spent the summer doing light odd jobs with the loader. So cleaning up the...

Hi All, I'm in the market for a CUT and will be heading out this weekend to look at a 2008 JD2520 with 200CX FEL, MMM (not sure on size), Frontier RT1150 Tiller and 4' Forks. ~ 100 hrs., pictures...

Hi all, I have a 2007 JD 2520 that has 420 hrs on it that has been working perfectly for my light duty work on my 2.5 acres. Recently I am having a problem with the tach and wanted to know if...

I just got a new 2520. It's advertised as direct injection. My machine has a glow plug light on the dash when the key is turned on. My dealer says they "must have added glow plugs because the...

Hi All, Traded my 4410 with a fellow for his 2520 a couple of years ago - the 4410 was simply too big for my new house/property. So, here I am moving again ... had to buy temp house and there is...

I want to use my JD 2520CUT to operate a land pride overseeeder os1548. Does anyone know if the tractor can lift it? THe tractor specs say it can lift #1,250 and the overseeder weights...

I have a JD2520 and I just purchased a Wallenstein BX42r chipper with the hydro power feed. Seems easy enough, I get a male and female connector and loop the power feed circuit through the power...

My dealer said I would be pushing it on the PTO power with this chopper shredder but the specs say no problem to me. What's your take? Anyone have this setup already? Bearcat says PTO of 540 RPM's

hello, I have a jd2520 scut that is having problems with the seals in my front hubs. I have looked on this forum +gtt to see if anyone else is having the same trouble this will be the 2rd time...

Well I used the 2520 for about 1 hour today and was about to load a Rock into the bucket so I lowered the bucket turned off the tractor and when I went to start it again it would not start. The...

A brand new jd 2520, 2013 leftover. Warranty starts when I buy it. Tractor, loader/bucket and frontier box blade for $16,300 What do you guys think? Or a yanmar 424, brand new 2015 with...

Does anyone have a good idea where I could find a chrome extension to put on my exhaust to get it up and over my head??? I have a 2520 john deere, I am looking to curve it at the current pipe and...

The JD2520 has an open system, not a closed transmisision like in a car (ie., if you have any attachments on the tractor such as FEL & quick hitch when changing the tranny oil) then you will...

Nice 2520 on ebay...(2520 John Deere Compact Utility 200cx 62d 54 blade 23hr Item number: 7629667377 ) KB9UDE, looks like yours, nice way to try to thwart the scammers. If you have to piece out...

Just got the Landpride QH15 quick hitch. After some modification to the top hook (releaving it so it would fit low enough to pick up my box blade) I went to my chipper shredder. The adjustable...

was at jd dealer picking up some parts. and I asked about getting a 2520 he said they are going to quit making it, but would sell me a 2720 for about the same price.he was going to work up a qoute...

I'm looking into selling my John Deere 2520 tractor with front loader, back hoe and forks to buy a compact excavator such as a JD 27 D. My question is how do I find my resale value? The 2520...

Local dealer has this tractor Machine Finder Has 200cx loader, 62" belly mower and 47" front mounted snow blower for $17900. Good price? Looks to be pretty clean.

John Deere 2520 200cx loader 62d mmm 54\" FB 14 hrs If anyone is interested in a 14hr. JD 2520 with loader, mmm, front blade please contact me. I will be selling mine due to massive medical...

Last fall, I purchased an BB1184 for use with TNT on a JD110TLB. Haven't desired to remove the BH yet, until there is some concrete available out of the weather. So, I am excavating an area for...

This was my first endeavor into the loader/bh world. Hopefully I made a good choice. Any tips, hints, suggestions on using (rpm with bh) would be appreciated.

JD 2520/2720 VS Kubota B2920 -------------------------------------------------------------------------------- I'm trying to decide between these tractors to buy. I have no previous experience...

To my fellow TBN problem solvers ... Background: Yesterday the 3 point was operating normally except for somewhat limited lift height because of a bent (twisted) bracket (Item B, page 60-35-2 of...

I know a guy that has a 2520. It starts and runs fine but the engine pre-heater light stays on. The light goes off when you speed the engine up, but comes back on when you idle back down. Any...

just some of my thoughts while mowing this evening. YOUR RESULTS MAY VARY! my current yard is 7 acres, nice grass, springfed creek, and lots of trees. i have owned probably 20 tractors over the...

I managed to get V-bar ATV tire chains on the front tires of my 2520 and have used them for a few weeks now with great success. The secret was to make the inside side loop real big, so it rides...

We are to take delivery of our new 2520 in the next week or 2 (waiting on arrival of FEL). Unlike many others, the dealer I stopped by had one on the lot. Whereas I have no reason to doubt the...

Does anyone know how the Power Beyond circuit is plumbed in reference to the Factory SCV? I'd like to know if the Hyd fluid flows through the SCV first, then through the Power Beyond (PB) circuit...

I was recently quoted a little over 23000.00 for this combination....thing is, they figured the tractor at the same price I was quoted a couple of months ago while I was trying to narrow down a...

Well I did a search for these two tractors and nothing was found so figured I would post my question/problem. Just for some background about me, I have no experience with any thing but a normal...

I bought a new JD 2520 today and the undercarriage mount rubs badly on the inside of the tire causing gouges. The tractor has less than one hour. How can I prevent this?

Just posting to introduce myself. I just joined and took delivery of my John Deere 2520 with the 62D MMM and 200CX FEL. I look forward to learning about my new unit from you all. BTW, who do...

Owners of 2520 with 72" mmm, which front hanger? I have a 2012 JD 2520 with a 72" mid-mount mower. When the deck is raised to the full up position, the draft arm rubs on the differential housing...

Just a quick writeup. I was searching a while back for a PTO power washer and I saw that there were some brief discussions of people trying to make a belt driven or gear box power washer for...

My 2520 lost steering suddenly without any evidence of any other problems. No hydraulic leaks, levels are up, hydraulic steering rod intact, tie rod etc.. I suspect the steering valve at the base...

Having put a few hours on my tractor I thought I would look at the grease fittings for the first time. So I pulled out the manual and only found 3 zirk fittings listed.:( This didnt seem right so...

I've been looking but can't find the answer. I doubt if there is much but need to know before I decide.

I have set of R4 tires and rims for a John Deere 2520 or 2720 Compact tractor. They only have 14 hrs on them and are in great shape. Asking $800 or best offer. Located in Spokane, Washington. Mark

Does anyone have the wheel spacers for the 2320, 2520 or 2720? i see the price on jdparts is around 100$, just wondering is that for a pair or each? if you have them do they leave enough room...

Hi all Yup I am new to the forum and glad to see one out there for tractors. I just got my 2008 2520 last month and of course am loving it. I have been using one at work for a couple years (thats...

My dealer said I would be pushing it on the PTO power with this chipper shredder but the specs say no problem to me. What's your take? Anyone have this setup already? Bearcat says PTO of 540 RPM's

G,day from mick white , recently purchased a new jd 2520 and am looking for information & specs, performance on the jd 46 backhoe + 4 in 1 bucket info, plumbing,valves etc, any help- info...

I just purchased a 72" mid mount mower for my 2520. It came with the mechanical lift to install it on the tractor. I purchased the tractor used off of a dealer a few months ago and it came with a...

Hi there, Am hoping some of you JD owners can help me please. I'm in the process of getting some adapters machined to allow me to fit some turf rims originally from a JD 2520 to my Yanmar AF120...

Hi, looking for this size tractor with a pto chipper in the 4inch range Do you have one what brand how do you like it thanks Steve

I am considering a flail mower for my 2520 and I have been looking at Everything Attachments Phoenix SLE line. Does anybody have experience with this flail mower? The second question, what...

Found a JD 2520 for sale and have questions about its prior care. Built in 2008, total time 369 hours. Last oil change was in 2009 with 109 hours with nothing since. So, with 260 hours and 6 years...

My yellow PTO knob will not stay out when I pull it out to turn it on. It will continue to run if I hold the knob out, but shuts off when I let go. Do I need to replace the entire knob...

Has anyone installed the JD 3rd SCV valve kit (LVB25927) and the power beyond kit (LVB25603) on their 2520? I would like to add a small grapple or thumb to my FEL.

I have just 70 hrs (from new) on a 2520 .. some of which was expended while plowing with a blower attached... and the mower belt self destructed. Not too eventful but was pretty tough to cut...

I traded for a used 2008 JD2520 in 2012 when it had about 300 hours on it. The dealer had recently changed hydraulic fluid and coolant. I’ve kept up with oil changes and lubricants. I am now...

Anyone else have a leak where this shaft goes into the transmission? If so, is this seal easily replaced? Not a gushing leak but always has drops on the floor when sitting overnight. My tractor...

Aloha, Anyone have/had a problem with their 3pt. hitch? After parking mine overnight, next day..3 pt hitch won't move changed the hydro oil and filter...still won't work. Front loader works...

buyjd-ML-891235-ML- JD Specific question - moved to JD forum

Any one had a problem with 3 point-hitch arms not raising or lowering? Have not had a problem in the past but now they seem to be just stuck!

They don't currently make one for our jd2520 CUT, but they said they decide which models to build the enclosures for based on the number of calls or emails they receive requesting it. FEMCO...

Sorry.....should have posted this on the "Owning and Operating" section. I moved it. REV

So, while mowing today the 2520 went out of gear. Switching from High to Low made no difference. No movement occurs in either direction. Hydro level is fine, and all PTOs work fine. Any clue...

Any preference between the two listed backhoes, for use on the 2520? The price is similar, about 5000 for the Woods, almost 6000 for the JD. The woods has a curved boom, JD is straight. Either...

I have a set of heavy duty pallet forks that are the fork lift type with fixed forks not the landscaper type that float it is designed to work with skidsteer type quick tach im wondering is there...

I have a couple of rookie questions that I’m sure I can get some help with. First when hooking up the hydraulics for the independent lift do you use the top two hydraulic connections (yellow and...

guys, I need to order a drive shaft for my mower, and I am having it made. My 2520 has a 15 spline PTO shaft, can anyone tell me if this is a standard 1 inch shaft, I'd like to order a quick...

Hi all. I remember seeing somewhere where someone had mounted fenders over the front tires of his 2520. I can't find it now but was wondering if anyone has done it and if so if you could post...

jdown-ML-786938-ML- Brand Specific. Moved to JD Owning/Operating Forum.

Morning I do my own maintenance & tractor manual says it痴 time to check the valve clearance. Thinking of having a local mechanic do it. Questions - directions on-line somewhere or do I need to...

2011, JD 2520, with 105 hours, new loader, new mower deck, asking 17K . Tractor looks like new..Thinking of asking for price with backhoe??? Opinions??

Hi I'm new to the forum but am considering getting a used 2006 John Deere 2520. Based on other posts in the forum it seems the two major issues were the 3pt drag links rubbing the tires and front...

I don't recall what thread it was in but someone relocated their seat belt buckle holders due to a hydraulic valve project they were doing. I liked the looks of where they put them so I moved...

Found this on craiglist http://kansascity.craigslist.org/grd/2436252883.html

I did my second transmission fluid change yesterday and couldn't get the 4 magnets in the suction screen to stick to the housing, they would all just clump together without any attraction to the...

I'm looking to see if anyone has mounted and used a Woods BH70 backhoe on a John Deere 2520. Does Woods make a mounting frame for this combo and is the BH70 to big for the 2520? I found a BH70...

Still looking for wiring diagram for a 2006+ JD 2520 with a Yanmar engine. Bought the manual from a JD dealer and got the manual for PRE 2006 machine. JD in its wisdom have used the sam model...

Anyone have issues with the gearbox on they're deere mower deck? Gearbox model AM136330 Mistakenly I missed an oil leak/seal failure. Thus destroying the bearings. Well this gave me a...

If you own a John Deere 2520 and are concerned about how close the draft arms are to the tires when using cat 1 equipment, see the following thread...

Guys, I just listed my 2520 in the classifieds at bottom dollar price... no dickering... just priced to move. I found my little replacement so it's priced to go :) . Any questions... let me know...

HI, I have jd 2006 yr. 2520cut 4wd with about 800 hrs., on it has anybody ever did john deere's upgrade to their spindle and bottom cases according to dtac on the parts breakdown? my left side was...

This is a first for me. So I guess I am a wanna-bee farmer. There are Avo groves all around and my 'great' brush & scrub oak landscape. I am now retired with a JD 2520 with just 10 hrs and it is...

2520 died last week while backing a trailer, checked fuses, pulled fuel solenoid and tractor starts and runs fine but have to shut off by reaching into solenoid area to shut off. Sounds like the...

Has anyone replaced the three point hitch stabilizers on their john Deere with the ones like I have seen on the kubotas. I am sure that I have read somewhere on here but I did a search on here and...