Search results

Results 1 to 22 of 22
  1. Mickey_Fx

    Anyone KNow? Wiring harness issue

    Looks like I have a wiring harness issue on my Cub. After 10 yrs, corrosion has set in on a short harness who's principle purpose appears to be to add a socket for what looks like a relay of some kind. I'm not sure whether the harness is a Kohler part or a Cub part. There is a tag on the...
  2. Mickey_Fx

    Anyone replace tiller tines somewhat recently?

    Just received my new set of tines and have started to replace them. Unfortunately, as received they don't fit. The profile on the attachment end is much different than the factory tines. Have about a third of the tines installed and had to grind on each and every one of them to make fit...
  3. Mickey_Fx

    3000 series availability

    Was doing some looking on the Cub web site and I no longer see the 3000 series machines listed under L&G. Next did a web search for these machines and that took me back to the cub site. Found some info but spotted a note saying limited supply. Has Cub dropped the 3000 series machines? Does...
  4. Mickey_Fx

    What's going on here

    Hard find the appropriate forum so here is where decided to post a forum problem. As of this AM while scanning down the todays posts, when I view a thread and then click the right mouse button and select back, the screen does move back to previous page but I also have a small window pop up...
  5. Mickey_Fx

    looking for brand recomendation

    Couple days ago my welding equipment walked off. I'm no where near being an expert in this area. Lincoln nearest model to what I had is their 140C model. I might like to upgrade to a small 220V model. Any preferences brand wise between Lincoln, Miller or Hobart? Would also entertain...
  6. Mickey_Fx

    Problem with fuel gage

    After many yrs of ownership, my first problem showed up this past week. Fuel tank is ~half full & when the tractor is first started, gage reads correctly. Doesn't take long, a few mins, and gage drops at least a quarter tank. Remains there for as long as the tractor is in use. Next time...
  7. Mickey_Fx

    crazy idea

    As of late I've been thinking of the possibility of increasing the wheelbase on my tractor. The WB on the F series to a little too short for my liking. The frame extends fwd enough to permit a movement of about 1 ft without the need for any extension. From a quick look moving the front axle...
  8. Mickey_Fx

    3-Point Hitch  Auto tilt on my quick mount hitch

    Last month I posted that I had added the components to my Yanmar tiller so I had auto depth and tilt control. Liking the auto controls so much I picked up another sensor and mounted it on my quick mount hitch. Now the QMH has auto tilt and anything mounted on the QMH can be adj with the flip...
  9. Mickey_Fx

    Auto tiller controls

    I've finished up mounting the auto controls for my tiller. Couldn't have done this without the help from Ernie. Ernie has all kind of parts for various Yanmar tillers. Only high-zut feature I know of I don't have is, I don't have one of the models with the shuttle control. Off-setting the...
  10. Mickey_Fx

    Fx24D weigh-in

    Being a old M.E. with **** tendencies I had to find out what my tractor weighed. There were several BIG surprises after the weigh-in and some caclulations made. Weigh-in conditions = Me sitting in the seat, quick mount hitch installed but no implement and empty FEL. Ernie told me when I...
  11. Mickey_Fx

    Couple ? about 3pt hyd

    I'm still trying to figure out how the draft control on this tractor works. Got part of it figured out but still have a couple questions. Do you know what this control is? (see pic) It's almost hidden by the seat and as can be seen it's next to the draft and lift levers. When moved forward...
  12. Mickey_Fx

    T80 crawler

    Spotted several new T80's and the JD dealer in town. Anyone know anything about them? Could this be the model Yanmar was talking about bringing in the country for vinyard work in calif. Lots of vinyards in the area so that is what I'm thinking but don't really know.
  13. Mickey_Fx

    Draft control

    Anyone know exactly how the sense control for the draft control connects to impliments? Know many, most Yanmars don't have draft control but some do and it is clear that these tractors don't control draft like U.S. tractors that do it via the top link. Here is a pic of the sense control on my...
  14. Mickey_Fx

    JD316 engine swap

    Didn't see anything via search so I'll ask. ANyone with and experience with an engine swap on a JD 31X tractor, either Honda or Kohler engines? Know several places have conversion kits for these engines but was wondering if anyone had experience with the swap? Ease of install and or problems...
  15. Mickey_Fx

    Quick disconnect bucket forks

    After seeing my bucket forks, tractor Ernie said I should post this project to the forum, so here it is. I had the need for a pair of forks for picking up brush piles and limbs. I got the idea from an uncle that made a set for his larger tractor. The forks slip over the leading edge of the...
  16. Mickey_Fx

    A tiller question or two

    I'm looking at getting a tiller for my tractor and was wondering if someone either had the knowledge or had a link that gave some info on all the various yanmar tiller models. Info desired was model #, size, type mount, preferred HP range, UFO controls, etc. Ws hoping to find a chart...
  17. Mickey_Fx

    Font end capacity

    Was wondering if anyone knew where one could get information on the front end capacity of their Yanmar? I've got a Koyker 155 on my tractor and I'm sure the breakaway capacity far exceeds capacity of the tractor itself. Did a little looking at tire capacities and it looks like the tires on...
  18. Mickey_Fx

    Voltage reading

    A few days ago I looked at the voltage at the battery while the engine was running and measured 14.8V. This is .5V higher than I like to see on a 12V nom system. Can anyone else report what voltage they are seeing?
  19. Mickey_Fx

    What's it mean?

    What\'s it mean? Was working on the grill and the 2 Logo's got me to wondering. The larger of the 2 is "Super Forte". Was wondering what Yanmar intended to convey. Did a Google search and had many pages come up but most all were foreign language. The words loosly translate to "extra strong"...
  20. Mickey_Fx

    Chinese/Japanese labels?

    After the recent purchase of my gray Yanmar I decided I needed to know what all the labels were saying. Had my son give pics to someone where he works for translation. To my surprise my son told me the person he gave the pics to said some of the writing was in Japanese and some in Chinese. Can...
  21. Mickey_Fx

    What doe this control

    Well, I said I would have some questions. Here's the first. Take a look at the attached pic and see if you know what this lever is for. I't located just left of the upper 3pt link. It's spring loaded and the control rod go forward but I don't see anything in the cockpit area attached to it...
  22. Mickey_Fx

    First time poster

    As the subject says, this is my first time to post. Have been lurking in the background for a short while. Purchased an Fx24D this past week after looking for CUT for a while. Purchase included a loader and mower and there is the possibility of a tiller in the future to replace a smaller...
Top