Search results

I picked up a project RTV900 from my dealer. It had been abandoned at the service department and sat for a few years. Paid $1,000 even for it. If I can get it running, the deal of the year, if not, well at least its keeping me out of other trouble. I'm guessing its a 2006+/- (serial...

Have a new to me kubota l5460 picture below. Trying to decide on snow weapon(s) Considering my options for snow removal. On my B3030 I have a front mount blower which works great, but requires removal of loader to set up. Also, the kubota blower for the L is only 74" which is the same width...

Anyone got a PDF copy or a link? Trying to install third function kit, didn't come with any instructions. Was hoping to spend some time on it tomorrow. worst case, Will call dealer on Monday Thx

Greetings all. It's been a while since I last posted. Just picked up a new to me grand l5460 cab tractor. I bought the rear defrost glass and am in the process of installing it. I can't find the location where I am supposed to install the relay. It is item 30 in the picture. There is no...

Back for a visit after 3 years of mostly MIA Work has been rather insane for me since Jan 2009, plus with the 2 kids growing up fast, I've spent very little time on tbn in the last 3 years. Back for a visit to search for answers since my B3030 is having steering issues with a heavy load...

First I must apologize for not posting much in the last few months. A new baby & busy work schedule are consuming most of my free time. Anyway - I always find TBN is the best place for answers to tough questions so here goes: We made a very hard decision last night - We are going to have our...

I need to re plumb my CCM toplink cylinder. I tweaked the banjo fittings when it made contact with my toolbox:o and quick hitch:mad: . My local guy doesn't have the stuff in stock. Being the heart of hay season, CCM hasn't been much help (I understand that they need to keep the farmers up...

Can't get to amazon.com yesterday or today - a coworker is having the same problem. Oddly we both tried last night & it worked, but it was late & I went to bed w/o placing my order. Just trying to figure out if Big brother is shutting me out... Usually the firewall/proxy has a notice that you...

Currently have Verizon FiOS 5/2 service. They want to sell me 20/20 for $10 more per month. I really don't have to wait for downloads, but the future in movie rentals is via the internet - ie apple TV or similar. My question is this - if I rent/buy a movie from itunes etc. who is the bottle...

Just curious - it seems they are the most popular "compact" tractor. My question applies to all the various models & configurations .

Looking for a high lift and / or mulching blade that "will fit" my RC72-30B mower. If anybody has a ZTR or front mower with the 6 foot deck - I'd love some measurements on the blades. Thanks!

In the market for a Medium - Heavy Duty 5 foot box blade. Been doing my homework. Requirements >700# (will be used as counterweight) Hydraulic or mechanical retraction of scarifiers (vs pull 5 pins and reposition) Unsure if I want to go with a roll over type, but it is up for consideration...

Currently have the RC72-30B mowing deck. I've been disappointed with it's lack of high lift blades, no available mulching kit or bagger. I tried using a trac vac with it, but the low lift blades left a bit to be desired. Trac vac might be sold today - so looking for other optoins. Does the...

Been spending my time skiing (45 days/ nights on the snow this winter) but it's good to be back. Projects for this summer include finishing my fence & a new deck & patio.

Well I got the chain fixed. Worked her for about 15minutes last night. Man does this thing throw snow. Anyway - it seems kind of noisy. Kind of makes a Wuhwuhwuh sound. Just wondering if it's normal. Wife said it sounded "sick". My 3pt blower was very quite except for the air moving. Of...

First time out only 4" of heavy wet snow. What a beast:cool: Well for 10 minutes anyway until the chain broke:mad: . Just called the dealer - they don't have exact chain, but have generic #50 & will make one up for me. Covered under warranty, but it's an hour ride each way:( . I suppose I...

We are getting a septic smell in the basement. Smell is more noticeable after a shower. No leaks can be found. On advice of my plumber, I had the septic tank pumped. I imagine if it were a plugged vent, that I'd be having draining problems in the rest of the house. Thoughts?

Busted another one this morning.:mad: I'm tired of buying junk. Help me find one that won't break. Prefer telescoping for added reach on wife's SUV. I'd happily spend $100 if it comes with a lifetime warranty (and a reasonable expectation that I'd never have to use it) - perhaps a business...

Thinking of a new cell phone. Verizon is the first choice as their coverage is better in my area (I have ATT/Cingular now & often can't get a signal or dropping calls). Stopped by the Verizon booth at BJ's wholesale last night. I was overwhelmed with choices... So - someone please school me...

Since we don't have a business forum yet (hint hint) I'll put this here. I'm currently employed as an engineer at a large company. I'm having a bit of an early mid-life crisis. I don't enjoy my work. I'm on my second "career" in the company currently working as a six sigma / lean blackbelt...

Someone snapped it up on ebay last night. Scheduled to pick her up on Saturday. I'm going to miss her - though I'm really enjoying the (slightly) bigger Kubota...

Well I was gonna post here for help choosing hinges etc. for the gates on my fence project, but I stopped by the local fence place on the way home last night. I ordered up 4 "packages" of snug cottage hardware agricultural hinges. See attached pdf that shows installation / gate building...

Nearest place (Burke Oil) wants $209 + sales tax for 55 gallons of offroad B20 = $3.80 per gallon delivered. They charge you a $20 drum deposit & will exchange old for new. Hand crank Pump is $30. Last week, On road diesel was just south of $3 a gallon including the road taxes. I'd like to...

I've got a call into my salesman - but perhap's y'all can help me figure it out... After using the machine a bit side by side with my NH - I feel like I'm falling off it - especially going downhill. At first my backside was really enjoying the suspension vs. the relatively fixed NH seat, so I...

After many delays - weather, sick dog, other activities, I've actually set 3 posts on my fence project. I have found my new england rocks - they were hiding under the fence line.:mad: Anyway - the ground slopes a bit. I'm getting ready to nail the boards to the posts. I've set the posts...

Need to purchase a 2" to 1-1/4" receiver adapter (to mount bike rack to 2" hitch). Will place order tomorrow AM, need it by Friday at the latest. Any recommendations? I've used a couple places in the past, but they weren't particularly quick. Amazon (my #1 goto) doesn't sell any "direct" -...

Mass Teen buys Farm 18 year old bought a farm in Westport, MA for $32K. Looks to be driving a new Kubota (or could be Kioti). Town helped out by buying development rights for $1M...

After looking at the B series brochure - I think I did get the new seat with my new B3030. It looks very similar, but doesn't seem to drop off in front. I haven't noticed any comfort issues yet, but only have a couple hours on the machine. So - I'm going to snap a few pix for y'all tonight...

Can't seem to get the hydraulic toplink to work. It extended, but won't retract. I re-jiggered (that's a highly technical term) the connections a few times. Figured perhaps there was a problem with the toplink so I swapped it out for the one that worked just dandy on my TC18. No dice...

Sorry for the junk pic - the weather has not been cooperating. Got it Friday afternoon - then took off to go sailing for the weekend - darn "other" hobbies:rolleyes: Next two weekends are booked as well.:o I feel a case of orange fever coming on if the sun comes out...:rolleyes: Here she...

I'm sure all are saddened by the loss of Paul. I for one am starting to really see how invaluable a resource he was here at tbn. We are struggling to answer hydraulics questions that he knew off the top of his head. I'd like to create a "wiki" on tbn for all things hydraulic. I need your...

Maybe if I put the busted tooth under the seat? I'll order a new one & a spare when I order the toothbar for my new B3030. Should have ordered a spare when I had the toothbar built, but I figured I'd have a hard time busting one on an 18 HP tractor. Funny thing is I've continued to use it &...

I had a nice writeup, but lost it - so this will be quicker. Regrading where the pool used to be (lots of gravel & concrete chunks buried shallower than I thought:o ). Having trouble removing rocks w/ landscape rake. Tilled the area, then raked. Pulled a bunch of midsize rocks out. Plan A...

Sorry guys, I'm bailing on y'all Sealed the deal last week on a new Kubota details in the Kubota forum here I in addition to more HP, I wanted a backhoe & also a MMM - no deal on the NH (subframe not compatible with MMM). I'll still hang around a bit - got to keep up with Dad's TC40DA...

They are supposed to be delivering the blueboard for my attic project this morning - I think I just saw the truck go by - maybe he is lost? Anyway - we are having a huge downpour right now. Should I refuse the delivery? Will it be OK to work with? A google search didn't turn up much info...

My B3030 is on order.:D I wanted to get a toplink & sidelink ordered up from CCM so I"m ready when the tractor arrives. :cool: I grabbed the length of the toplink closed (18") and the fixed sidelink (16.25") but didn't have a set of calipers with me to get the top & bottom pin diameters off...

Sealed the deal today.:D :D :D Should get the new machine in about 2 weeks - lots of setup to be done... B3030 HSDF w/ loaded (Rimguard) turfs LA403 FEL w/ ATI skid steer quick attach & 60" bucket 72" MMM 2 rear remotes - one valve floating 40 amp alternator Bradco 2,000# front forks BL2782...

Want to set up my machine for automatic backups to a usb hard drive. Just data files - pix, music, etc ~20GB. I tried Windows XP Backup utility but it konked out after 15 minutes and 4GB. I even had to manually install it - seems like something that should be built in. Looking for other...

Our fence is litterally falling apart. previous owner used rough sawn untreated pine. It didn't last long:mad: Wife insists on painting or staining the new fence white. I tried to convince her that we should go with cedar and let it age - no dice. I figure I'll paint it when installed, in 5...

Nice unit - a foot or so longer than my TC18 but not any less manuverable. Really liked the 3 range tranny. Below is my laundry list - perhaps I am going a bit overboard, but with the 0% financing I figured endure the sticker shock once instead of over time... It is more a question of getting...

Local dealer has a used B3030 available listed for $13,900 with loader (200hours). Add mower, rear remotes, front forks, quick attach etc, I'm at about $20K (at full MSRP - no dealing yet). New setup (no dickering ) would run me about $24K. Cost of money calculation is quickly closing the...

I have a small garage - 18 feet deep. My standard operating procedure is to take my loader off in the garage (bucket against the wall) and then park the tractor behind it. Sooo - how much space does it take up to drop the loader & then park the B3030 behind it? In the BX brochure, it looks...

Picked up my new Bearcat 73554 Chipper Shredder on Thursday. Got to run it for 5 hours this afternoon. It has a new name - CHIPZILLA :D :D :D Here is a mini review & some pix. I tried to convince my wife to take some video, but she wasn't inclined to help me contribute to your deliquency...

You take your (20 month old) daughter chipper shopping for "family time". When you return home, she spends more time looking at the chipper (and tractor) brochures than you do. You attempt to make it a learning experience by pointing out the colors of the equipment to appease your "unamused"...

Price is the roughly the same Tasks include picking up home improvement materials & trator implements Tow vehicle is 2004 Honda Pilot 3,500/4,500# tow capacity (box trailer/boat) Option 1 Load Rite UL510-2600 5 x 10 tilt 2,600 GVW 470 # empty $1,700 with aluminum sides & rear ramp $1,150 w/o...

I have the NH rear remote kit. Want to add the CCM hydraulic top link. What length hose are y'all running? Any pics of the setup? Thanks

trac vac 662 or "truck loader" with existing dump wagon for leaf & grass pickup? Hi gang, I've got a side discharge mowing deck on order to replace my rear discharge unit. As such I'm ready to declare war on grass clippings and leaves. Tractor - 18HP New Holland TC18 small compact (not sub)...

ebay 914A MMM For all y'all who maybe aren't happy with your 60" rear discharge, here's an opportunity to swap out for < 1/2 the price. I contacted the seller & they are the OEM for New Holland. Seems that New Holland forecast sales higher than actauls on these units & they are moving out the...

I'm looking for a new chipper shredder. Anybody have any experience with this one? Bearcat 73554 Chips up to 5" adjustable size for chips/shreds. Integrated blower. A search here turned up that Doug_Norman has one bearcat review So Doug - how's it holding up? Anybody else got one? I'm...

From MN DOT Kubota Loader / Landscaper section B8032 Top & Tilt kit includes cylinders and hoses $588 B8042 Remote valve kit for rear attachments, includes 3 spool valve, bracket, hoses & quick couplers $796 Anybody know if this "will fit" on a B2710? It looks like an easy way to add Top &...

Hypothetically speaking (yeah right:rolleyes: ) what would you expect to receive for a discount off MSRP for new attachments and options purchased with new tractor. I'm in New England - not known for low tractor prices. For example - I'm looking at a used Kubota @ a dealer. Want to add front...

I'm thinking about upsizing (looking at the Kubota B2630 / 3030:eek: ) Don't tell my wife:rolleyes: :o 2002 TC18 4WD HST tranny w/ 7106 Loader & 60" 914A MMM Loaded (Rimguard) R4 tires Unloaded turf tires Toothbar (1) Rear remote Old 48" 3PT snowblower (if upgrade, I'm getting a front...

I'm considering upgrading my TC18 - shhhhhh don't tell my wife:rolleyes: I'm trying to minize my hit on depreciation by buying used... Just wondering what is new on the BXX30 vs. the BXX10 machines besides the more modern looks and new loader (which seems to have similar specs). I'm not...

While I'm still not done with my third floor meida room, It is time to start planning my carriage house (detached garage) project. I'll be hiring the work out (save maybe for final grading which I can do with my tractor:cool: ) My contractor isn't all that busy & I may be able to get it done...

Since I've gained a more worldly understanding of the climate change debate, I thought I'd see what I could learn about fossil fuel depletion. It seems we've been predicting that we'd run out of oil ever since we discovered it. I certainly understand that it is a finite resource and eventually...

Seems we discussed this a couple years back front load washers I'm in the market for new washer/dryer. The dryer squeeks like a mouse on crack - I can't hear myself think when I'm in the basement. It makes more noise than my table saw:eek: . Washer is a top load, decent capacity, but a water...

It seems we got off on a tangent in this thread Brown clashes with Orange. I though I'd start a subject on it's own. I know this is a potentially politically charged subject, but I for one think our children's future crosses political parties (and that we here at tbn can discuss it in a...

google is giving me data overload but no information...:mad: Can someone point me in the right direction regarding online and or print references for surveying. I have a robotoolz "automatic level" that I picked up for cheap. I'd like to learn more about what it can do vs. a transit and how...

On a WW forum I visit, a few of us are exploring the idea of making some plane irons to build some "woodies" - similar to these pop mechanics wooden planes We are trying to keep the cost down and are looking for someone willing to do the machining and / or heat treating in exchange for some...

Stumbled across this in my shopnotes magazine. I used it to model a crib for my neice see thread here. Very easy to use - I was productive after a couple hours using the tool (though I do have experience with CAD). Thought y'all might want to check it out - the price is right. You can...

I'm wrapping up the design stages for a crib for my neice. She is 6 years old, but has special needs which require a safe place for her to sleep. My inlaws bought a vacation condo in VT - this "crib" is so that my brother in law & his family can enjoy it with their daughter Katie. I modeled...

Here are some pix from the Main ST recreational pool removal and patio betterment project phase 1 - pool demolition. phase 2 patio installation will be next summer. Brand spanking new (10 hours on the clock) Volvo BL60 delivered Thursday afternoon with demolition hammer. pic 1 before pic 2...

Tried to rent a rake - the local rental yards require you to rent the tractor as well:mad: . Called around and the local Deere dealer has a used rake in stock. Sorry guys - It's got my name on it now. Anyway - looking for a couple quick tips on how to set the wheels. I need to finish grade...

You're dissapointed that the neighbor's tree service returned to pick up the log length wood they dropped before you could offer your "assistance" in it's removal. Had to be a good couple cords - Oh well.:mad: :rolleyes: If I were truly in the country, the neighbor would have a means to use...

A discussion about this came up in the New Holland forum. I though I'd repost it here as I spent a good chunk of the evening writing it up. I know, shame on me for double posting, but I think it deserves to stand on it's own. I'm sure Dad would like to see me putting my engineering education...

Step 1 - move all the garbage out of the way Step 2 - MOST IMPORTANT - remove laundry from the basement Step 3 - mark it out Step 4 - score with old circ saw & diamond blade - man does that make dust! pic 1 junk pic 2 laundry pic 3 clear pic 4 blue tape marks the spot pic 5 scored cut

Step 0 get lucky & semi shows up with lift gate - still a chore to get it off as the crate interfered with his pallet jack. I had to lift up one end with the tractor as he lowered the other on the gate. As shipped

Take the demolition saw to it:eek: :cool: :D

I'm looking at buying this Makita DPC7311. My used Stihl from ebay showed up & it is BEAT:mad: I'm in the process of trying to return it. I need to work WITH my tools, not ON them. Anyway - the Makita is $850 at Home Depot w/ free diamond blade and 4.5" angle grinder. A 14" Stihl TS400 is...

Just ordered a rear remote kit for my TC18. Dealer says it comes with the quick connections male & female - Anybody know what size fitting to use on the hose 3/8, 1/2 NPT? Dealer thought it was 3/8 but didn't have it in front of him... I'm trying to get hoses made up ahead of time for my new...

Hey gang, I'm spending money like it's going out of style:o - just ordered the country manufacturing 2 ton dump trailer. Also ordered a rear remote kit for my TC18. Anyway, I need a length for the hydraulic hoses - I think I saw that someone used 7 & 9 feet on the wagon. Is that a safe bet...

Besides the big price difference ($100-$150 vs. $5-$10), what are the pros and cons of the diamond blade vs. the abrasive? I just purchased a used Stihl 14" cutoff saw on ebay. I've got a few upcoming projects: 1- I'm planning to demolish & remove my pool in a few weeks (renting a fullsize...

Thinking of picking up some front weight so that I don't have to add the loader when aerating, spraying or running the (future) 4' rotary cutter. Too many trees to watch out for.... Anyway- what are y'all running for front weight? Dealer says (2) 60# weights will fit on the "bumper". There...

I bought one of the Harbor freight quick hitches. Just wondering if the new holland ballast box is compatible. My homemade concrete block isn't w/o modification (no room for top link hook to scoop under). I called my dealer & he wasn't sure, he said he'd have to check. I know someone here will...

OK stupid question, but I need some details on how to wire the 24V control lines between house & outside condensor unit. The unit only has one knockout on it for the "liquid tight" conduit. I know I shouldn't run the 24V with the 220V power lines. I looked quick at my parent's house - didn't...

For several reasons we are considering removing our inground swimming pool. 1 - Except for the dog, we don't use it much 2 - It was very poorly constructed - falling apart after 7 years (we bought the house 4 years ago) 3 - Because of terraced layout (see pic 1) fencing immediately around pool...

I'm thinking about a sprayer for the tractor. In my research I stumbled across this www.mosquitobarrier.com - pretty much a "super" garlic oil. Amazingly a search on tbn turned up nothing. So the question is - does it work? Folks on lawnsite are reporting some success.

Any reason not to go with the dual heat exchanger forced air furnaces? I'm adding HVAC to my third floor media/play room. heating guy quoted an 80% unit, - mentioned something about the condensation freezing in the 90+% unit (it will be located in attic area - currently uninsulated, but I...

HELP My (very generous) parents would like to take us on a family vacation as a Christmas present. We are having difficulty selecting a vacation that appeals to everybody. Some want to lounge around, some would like outdoor activities, some would like historical places to visit. Constraints...

I have a small woodstove in my family room. We burn 4 cords per year. Every cord or so, I have to clean the chimney as creosote has built up, reducing draft. Cleaning the flue every cord of wood seems excessive to me. The flue exits the stove, goes thru a couple bends, and then out the...

Texan\'s view of the world For the Texan's who wanted to put the Lone Star Flag on the totum pole - see attached...

Getting from the high side

My parents commissioned this totem pole by a local (Massachusetts) artist. They got many a strange look when they trailered it to their farm in Maine. Mom didn't take pictures of the installation (Dad used the TC40 to lift it up). It stands about 12' high

Read an article on this in Newsweek, thought I'd share... farmers only online dating service Here's the article msnbc newsweek Love me, Love my hogs In the society section no less

Y'all need to check this out. google earth You have to download the software (11 meg) but it is waaaay better than the previous satellite web sites...

Wifey wants sharper kitchen knives. A google search has turned up information overload as usual. Looking to the tbn brain trust for a recommendation on the "proper" equipment. Requirements: 1. Sharpens - duh 2. Easy to use 3. Quick 4. Reasonable cost I couldn't find anything that was...

Santa\'s elf busy at work... Some projects I've done for the family #1 cutting board

Can anyone (Jinman ) send me a copy of the Class III service manual instructions for removing the fuel tank? I'm headed up to Maine in a couple weeks - I'd like to fix Dad's TC40. He has to stop a couple times while mowing to blow out an obstruction in the fuel tank... Send me a PM for...

Santa is looking for a list... I came across this ryobi one "works" kit at the Depot for $229 You can add other 18V tools list here for reasonable prices -$69 for impact driver, $79 for 3 speed hammer drill, $39 for 2 extra batteries... Just wondering how well Ryobi's hold up - seems to...

Heading out next week for work - looking for the "tbn approved" eatery. Mexican and or Steak. Thanks

It appears that the woods subframe is compatable with the class 2 boomers & MMMs, but the directions for the TC18 subframe don't mention anything. I'm sitting here daydreaming of a hoe for my TC18, but don't want to give up my MMM. As I see it, my options are 3pt mount hoe - tractor...

I'm going to buy a paint sprayer today - I'm leaning towards HVLP vs airless, but thought I'd ask here first. Tasks (In order of use) Latex & "Oil" paints - interior and exterior Deck & House stains Potential woodworking finishes - Poly, laquer, stain etc. (I think this is HVLP only?) I...

Looking to someday add a freestanding barn/garage. Would like either stick built or pole/post&beam structure (not steel). I've come across a couple suppliers on the web, just wondering if anybody has recommendations that my searches didn't turn up. I'd prefer something in New England - I'd...

We now have 7# (and growing - see attached) worth of reason to upgrade our picture taking - I'm thinking good/great digital camera and order prints as needed. I believe in the long run this will be cheaper?. Anyway - wondering if I should be looking at the ~$800 + lense digital SLRs Canon...

It\'s a girl... Marissa Paige - born 8/1/05 6# 14oz. Mom & baby are doing great. The first book dad read to her was about tractors - see it's related....

Dad was out mowing this week, when the tractor died in the field. As is usual with most diesel engine issues, it was a fuel problem. The service tech diagnosed it as a foreign object in the fuel tank. They were able to rejuvinate the machine by blowing out the fuel line from the filter...

Packing up to return from the holiday weekend... As the saying goes, Dogs LOVE trucks!

It\'s paid for.... Woo hoo - last payment this month. Tractor is now owned "free and clear". Was a 5 year loan, but we doubled up on the payments a year into it, thus done in 3 years. What is the appropriate ceremony? Maybe wash the tractor for once (I've only ever cleaned it after...

Life\'s changes & tbn\'s influence -It\'s Rat\'s fault It's all Rat's fault. After this discussion fuel effecient vehicles I've been doing some soul searching. When I bought my truck (2002), my wife drove a Honda Civic, so I figured the gas guzzling wouldn't bother me. In October 2003...

Hey gang - heading out west for work tomorrow. Any good steakhouses between DFW & Richardson? Any other restaurants recommended? I trust y'all more than zagats...

Deere \"product placement\" on West Wing TV show I was watching West Wing last night. The story was that the candidates for the next election were campaigning in Iowa at a corn grower's festival. They had Deere equipment all over the place. Wonder if JD paid for it...

Got about 2 - 2 1/2 feet. View from the garage.

Currently pay $35-40 in local & regional calls, $15-20 for long distance via my "copper" phone line. I've gotten a couple ads for VOIP sunrocket $24.95 unlimited local & long distance Vonage $24.95 unlimited, $14.99 for 500 minutes per month. Almost seems to good to be true. Is there a...

Didn't know if I should put this post here, or in the "attachments" forum. Anyhow, wifey wants new rug beater & bare floor attachment for central vacuum. My mom has an upholstery attachment that works well for removing dog hair from the couch - might like to get one of those too. Right now...

We were towing the trailer around cleaning up brush. Turned a little too sharp & trashed the emergency brake box on the trailer. Looks like the drawbar might be adjustable, but we ran out of time to crawl under and mess around. Operators manual didn't mention anything. So, to satisfy my...

Dad's new TC40 has loaded rear tires, and New Holland Ballast box on three point. (Found a pic of it being delivered). When I stuff the bucket deep into a dirt pile, I can get the rear end to lift when I try to curl the bucket (dirt doesn't move). The tractor was on a modest hill (dirt pile...

Dad invited me up for a play date with the new beast. First I must apologize for not bringing the camera along - I just plain forgot. First the bad news. Big brother doesn't know how to share well. Brought the chipper up - PTO shaft too short. Decided we should try out the 4' Rotary...

We\'re now a 2 tractor (extended) family... Mom & Dad bought their's today. Getting instructions

As you may remember, I wasn't thrilled with my gator blade purchase this summer. The cut quality was inferior to the stock blades & they didn't slice the grass up any extra. For the heck of it, I re-mounted them this fall to see how they'd do in the leaves. My leaf blower is jealous. They...

Glucosamine for dog\'s aging joints? Old man Wilson turns 9 this month. Vet thinks his joints may be aging & suggested a glocosamine supplement. I did a google search & was overwhelmed - can't seperate fact from fiction. Can someone give me the lowdown - does it work? how it works, what kind...

Mom seems to want a backhoe. Uses would include rock and stump removal. Are you happy with yours? Do you have a 757 or 758? Is it worth the $6-7K?

I know the 716 sub frame wasn't compatible with the loader sub frame. Are the new front blades 72CBH and 84CBH compatible? Pops is thinking future use for snow removal.... He could go with a loader mounted blade ala curtis.

Which Grapple for 16LA - 5\'/6\' Anbo/others? Was down at the 'rents this weekend. They are leaning heavily towards the TC40DA. One of their tractor missions is to clean up along the stone walls at the farm. Mostly small brush. I figure a grabble should help them out. After searching...

Driveway finally got paved. Now I'm busy spreading loam around the edges. I've already scratched the new driveway with the FEL. Nothing worse than It would get from plowing in the winter. Driveway guy said to get it sealed next summer. If it's so great, why doesn't the DPW use it on the...

AFFORDABLE 7\' cutters - single/dual spindle Dad is thinking of a TC40 for the farm. Wondering if we can get into a 7' cutter for it. Woods std duty was $2800 Befco Medium duty (std not avail) $3600 + not recommended for 40HP compact What's out there in 7' size for less than $2K?

Looks like I get to tractor shop again - Ma & Pa are looking to put me out of the field mowing business. They want their own tractor. I'm "consulting" on the purchase - ie explaining what this lever does & that one etc. We were checking machines out at the fryberg fair. Pops likes the "Class...

Anybody running a TC33 with 6\' cutter? Ma & Pa have decided to put me out of the field mowing business. We checked out tractors at the Fryberg fair. Poor showing by New Holland - only ONE tractor there - TC30. Anyhow - They/We (I guess I'm the "expert" - or at least I can pretend I am...

Guys, A buddy at work's Sony 8mm analog camcorder died (Handycam CCD-TR73). He is shopping for a new one. He is trying to find out if the new digital ones have similar optics - especially concerning low light. He has tried local camera shops & sony technical services, but nobody seems to...

Any contests in the works? Perhaps a free coffee mug to the 500,000 poster. Keep up the good work. An aside - TBN keeps poping up as a result on google searches - even some not related to tractors. Any stats on how popular tbn is vs. other web sites? I know it is #1 in my book

Getting new driveway. Had digsafe mark utilities. Water dept says my "gate box" is bent. Says I should fix it before driveway. They are unable to turn off water if we were to have a problem. Can I do this myself with mini-excavator? It is 6' down. Tips or tricks I need to know about?

No spark. Model BKND engine. Where does this wire go from the coil? Thanks!!!!

What would you pay for a beater log splitter? I'm looking at one this afternoon. Guy says it ran last year. Old wisconson engine 8-10HP. He's asking $250. Couple questions - what would you pay if he can get it to start If the engine doesn't run? Anything I should look for on the machine...

FEL quick connect covers won\'t stay put 3 of the four won't stay on. Are these things a "wear item" - Ie do I need to replace them every couple years.

Well I've had them for about a month now. Cut the grass ~6 times. Put the regular blades back on yesterday. Results Gators seem to distribute clippings a little better. They don't seem cut them into smaller pieces. They give a worse cut - grass is less even. Leaves a ragged strip between...

Having trouble with my truck. Thought I might get on of the code scanners/readers. Did a google search - wow! Can spend anywhere from $50 to $2,000. Seems that the basic ones will read OBD II codes. Will a more advanced one give more data? I'd rather spend $300 once than $100 4X. Is...

2001 F150 sometimes has rough idle & hesitates under light acceleration, but if you mash the pedal it runs fine. The hesitation is accompianed by a vibration. Of course the problem is intermittant. Dealer replaced Idle air control valve to the tune of $200. But it didn't solve the...

New Holland less \"Brand\" vs Kub or JD? Dave4410's comment that we weren't a chatty group got me thinking. Anecdotal evidence seems to indicate that New Holland has less brand recognition than Deere or Kubota. For example, seems whenever I'm talking with a non-tractor person and my tractor...

I checked the 2001 edition construction cost estimator 2004 on amazon out of the library yesterday. It has lots of good info, but is set up to help a contractor know HIS costs for his employees to do a job, no overhead, no profit. Ie they are waaaaay lower then you'd pay "retail" to have...

Any interest in creating a forum for our tractor tow vehicles and trailers? I see a lot of threads about both interspersed throughout many forums - buying, owning, rural, related etc. Food for thought.

On way home from work, starboard blinker is flashing very fast - hmmm, maybe a bulb is out. Stop at auto parts store - yup rear bulb is out. Buy new bulb - $2.50 Look at truck - need socket set to get tail light apart - head home. Get socket set out. Reach thru 1" hole in inner body panel...

After 1 hour mowing, my spindles are hot to the touch - but not "burn your finger" hot. Is this normal? I follow the recommended grease schedule - more or less (don't log MMM hours). But it is hard to tell when You've got enough grease as you can't see it come out the other side. I usually...

I just used the gallery for the first time. Very nice addition. A couple of comments. Don't know what you have in mind for the future, but here's a couple things I'd like to see. 1. For those of us with broadband access, it would be nice to add more than 5 photos at once. 2. Auto photo...

I'm planning on taking a welding class this fall at the local vocational school. 60 hours on Arc, MIG, & TIG welding instruction for the low low price of $160 + $40 materials fee. My tax dollars at work . Need to supply my own helmet. Looking for recommendations on which one. From a search...

Mom's computer had pop up mania - downloaded ad aware and spybot search & destroy. removed ~200 unsavory files. Here is what I'm using at home Zone Alarm Pro Norton Antivirus Ad Aware spybot search & destroy Windows XP Net connection set for "firewall" Zone alarm seems to be blocking a bunch...

I'm eying this one. Craftsman laser track 360 since it is 10% off right now. Is this the best type for laying out the walk? I want to be able to set grade (which I think this will do well at) and also set 90 degree corner - Don't think this will do that. Thoughts? Should I be looking at one...

This weekend's project is new front walk. Do I need the vibrating plate compactor? Manufacturer specs hand or power compaction. 75 sqaure feet total. ideal concrete block

Anyone heard of \"mortgage cycling\" I was searching the web for a mortgage calculator and came accross this wisemortgageinfo.com Mortgage cycling Looks like a scheme involving borrowing from Peter to pay Paul via a home equity loan. You're supposed to get some advantage by paying big lump...

I recently ordered the gator blades from my NH dealer. Figured I could save the hour round trip drive time by having them drop shipped. Parts guy told me that New Holland is now charging a handling fee for drop shipments - $6 + 10% of the order plus freight! . I figured I'd have to pay the...

Hey gang, Wife is sick of weeds growing in gravel driveway. I'm sick of dealing with gravel in lawn after plowing snow. So we've begun getting quotes for paving. Question - what do I need? So far 2 guys quoted remove gravel, grade & pave with 2 1.5" layers of asphalt (3" total). One...

After 2 week vacation, came home to lawn jungle. Mowed it sunday, then again last night. This is typical of what my lawn looks like now. Not even one of the worse spots (but was near window for pic). I'll be ordering the gator blades today.

Does this mean that Tractors will come in pink someday? Wife Acceptance Factor (Boston Globe Article)

\"batch\" processing of jpegs? Is there a web site or software out there that I can batch process a bunch of jpegs. Ex I took a bunch of pics on vacation at high res. I want to resize them & optimize for small file size to email. Can I do them all at once? Opening them individually in adobe...

Life\'s a beach Subject says it all

Hey gang, My trailer for towing the tractor is wired with a 7 pin connector. My truck has the corresponding connector. I want to check the status of the emergency battery. Also, I bought my dad a 7pin to 4pin adapter so he could tow the trailer (empty of course). We store it in the barn...

Here's my sob story - bought used chipper for 1/2 what a new one cost. Flywheel got loose (bolt missing) and chipper knife collided with anvil, breaking in two . Remaining knife tries to chip pieces of first knife, killing that one as well. Chipper Manufacturer (WW Grinder) is out of...

Hi guys, Like most others North of the Mason-Dixon line, my tractor hydraulics are noisy in the winter. I just did my 300 hour service, and was all set to get the F200A oil. Parts guy said try the Exxon 560, it will reduce noise & is 1/2 the cost of the F200. Of course, the receipt is at...

Just stopped by dealer to pic up supplies for 300 hour service. They had a couple TZ 24's out front. Here are some pics

Wife and I were planting hydrangeas yesterday inside the fenced yard (where the dogs hang out). I must have raised them right, because they both love the tractor. Wifey has to keep them away when I'm running the machine.

As gas prices keep climbing, I'm trying to figure out how to save some bucks. I still need/want to have a truck, so I'm thinking about a couple options - 1. Sell gas F150, buy used diesel pickup (probably ford, as I really like my dealer). 2. Buy beater commuter car - Honda Civic, MB or VW...

Got tired of dragging my aerator out of the shed to use as counterweight with the FEL and my unloaded turf tires, so I decided to build a dedicated counterweight. I got my inspiration from several threads here on tbn. This is my first ever stick welding attempt. A good one too - I get to bury...

For Russ (and other's who might be interested) - sorry it took me so long. The attached diagram shows a typical flow of hydraulic fluid thru a compact tractor. For those interested in adding remote hydraulics for a top & tilt or whatever, there are two ways to do it. #1 buy the valve from...

New to me WW Grinder chipper/shredder- how\'d I do? After a hard day of burning brush that literally made me sick, I decided it was time for a chipper. Found this on ebay. $750 WW Grinder "super apache". I pick it up tuesday. I'll le y'all know how she runs.

Since it shares the garage with my tractor hopefully this counts as related topic. The wife's new honda pilot has a vibration problem on the highway. I've been back to the dealer twice now. They computer balanced the first time & then used their new Hunter 9700 dynamic road force balancer the...

Some may beg to differ regarding the first statement but the second one will hold water. I just bought a blower. Found a used 48" Ford 715 in Mass. Picked it up tonight. Pics to follow later tonight (gotta make dinner & get it out of the truck).

\"Store\" is out of date I've noticed that when I click on the "store" link at the top of the page, a few things are missing. No link to the Pat's easy change or the dual-axis tiltmeter... Happy new year & keep up the good work.

What a beast. Sorry didn't have the camera with me. Sales guy says $27,500 with a loader (loader hasn't shown up yet). Chappell Tractor in Brentwood, NH The new hood scheme looks better in person than on the web. Latest is that the TZ subcompacts are due in Jan.

My Duo-Grip chains give great grip, but a bumpy ride. Is there a practical way to add cross links? I'd like to put them where the red lines are.

Hey gang, Trying to get a blower for cheap. Willing to drive to pick it up. Anybody gotten a good deal on a 48 - 54" snowblower in New England / New York? Best local price to date is $1449 for a 51" Meteor. I'm trying to get under $1,200 new or under $900 used (depending on condition). Thanks!

In my quest for a cheap snowblower I've come across these if anybody is interested. TC18, 21 21D repair manual 702C front blade TC25, 29, 33 Curtis cab

OK, Wifey has asked for some "Carhartt" work pants for Christmas. (To wear when driving the tractor of course ). She wants some like a pair I have with double fronts Cabella's double front . The best that I can tell, Carhartt does not make ladies' pants. My mom says that Guy's pants won't...

All Twelve sections. Says "volume 1" on the binder. I don't think there is a volume 2. Maybe somebody else can educate me on that. Well it is certainly educational. I get to see the guts of the tractor. Splitting the tractor only takes 11 pages to describe. Can't be that bad The...

Solo showed us this Ebay 2565392291 a while ago. Seller advertised 700-1,000 pages. I just won this ebay 2572252203 from the same seller. for this one he advertises the same sections, but only 500 pages. Just wondering what my $24.99 got me.

Good price if you are local. I got a freight quote of $835 . Cheaper to UPS it individually ebay #1 ebay #2

Santa is asking for xmas lists. Besides asking for tractor implements, I think it's time for a printer. I'd like to be able to print photo quality pics of the tractor & the boys (see attached). What are good printers these days? I'm kinda out of the technology loop. Looking for a head start...

Rookies with FEL\'s READ THIS - Tractor Ballast 101 I seem to be reading alot about unstable tractors/rear ballast/loaded tires lately. I won't hyperlink the threads to protect the innocent, but what I've been reading concerns me. I've decided to outline a simple three step procedure to help...

Anybody got one? How well do they work? There is a used one advertised a couple hours away for $300. 54" Int. (International?) brand. The engineer in me says 2 stage is better, but the price is right. I'm thinking of checking it out next weekend.

ALL of our austrian pine & arborveti are turning yellow/brown. Are the just jealous of the fall colors - or do we have some kind of problem. I've never seen this before. Pics attached austrian pine

Spent the day today making fuel for next winter. Don't feel like I accomplished much in 8 hours. 1. Down tree 2. Limb 3. Cut logs into 16" lengths 4. Transport to "firewood central" with tractor 5. Bulldoze brush into pile with tractor I figure after 8 hours I didn't quite get to a...

Instead of continuing to hog the other thread, I figured it was time to start a new one. I've gotten a hold of the parts breakdown for the 702C Blade(thanks to Jason & my local dealer). I started looking at the tractor tonight. Seems like it wants to bolt on in the same place as the FEL...

I know it's been brought up before.... Since I'm a know repeat offender of bad spelling, I thought I'd plant the bug again. Came accross this spellchecker.net Can it be integrated into TBN? I'll happily buy a hat to support the cause even though my freebie is serving me well.(although...

The built in one is handy for pins, clips & the occasional tool. I need something bigger for carrying chain. For the 10th time I've put it in the bucket & inadvertenly dumped it somewhere. I did a search on Toolbox, but nothing came up for the little boomers.

Some of you might remember, I've got both types of tires on my TC18. A while back I asked how to change the loaded tires. Thanks to the expertise here, I was able to do it safely & easily. Some pix are attached (man I love my new camera). First Tractor with R4s

Considering it is only 2 seasons old - needs a good cleaning

I was switching from the turfs to the Industrials - Going to mow the fields in Maine again this weekend, when I saw grime on the Right front hub. I checked the oil level & it was OK, but the oil was dirty . Then I checked the left front oil level, what a PITA, you have to loosten up the...

threads/posts I\'ve read are becoming \"unread\"? For example, Mwurms vacation home thread. I read it yesterday. This morning it is showing 31 posts 31 new? This isn't the only thread that it has happened to. I can't identify any kind of pattern to it. To be fair, I check TBN at home & at...

Bet you\'ve never used your tractor to do this Looks like I'm growing a little grass in the draw bar. All kinds of debris collects in there. Must have gotten the right mix of organics, soil & grass seed.

Spread Weed & Feed tonight after the rain. Here's a side shot

Just curious how many of us there are. Off the top of my head: For TC18s Me (just passed 200 hours) OkeeDon TC18Guy Solo JimBinMI AndyM Inspector507 TC21s Steelfan TC24 Bob Skurka jstwar jimg I'm sure I'm missing some. Chime in guys.

Aerator & Irrigation system Don\'t mix!!! Thought I was doing my pops a favor by aerating his lawn. He has a lot of clay & it was quite compacted - never aerated in 14 years. Well I sprung about two dozen leaks in the irrigation system that either wasn't buried deep enough, or moved to within...

My old boots are getting tired & were never very comfy. They are Timberlands, previous pair were Wolverines. What brands have y'all had good luck with? Santa is alway looking for practical gifts...

I really wish someone would make one for <$1,000. My walk behind little wonder has crapped out again I can't complain too much as it was free & is more than 15 years old. Can't decide if I should replace the motor ($350 for new Briggs $550 new honda), buy a good quality backpack blower, or...

I've been doing my homework on the web. Wife likes the Honda Pilot but it won't tow the tractor (had to keep this a related topic ). Not a huge deal as I've got the pickup for that. Anybody got one of the above? I'd like to hear your experiences. We are going to go test driving tonight...

Needed something to mow around the house, didn't feel like trailering "big" blue up every week, so look in the yellow pages... Only choices were JD & Toro. Brought this baby home in the back of the pickup. Hall Implement in Windham, ME was very accomodating. We showed up 5 minutes before...

Field Mow\'n in Maine - TC18 in action About 8 acres in 6 hours over three days. Here is tractor on trailer.

I stick 1 adj wrench, 15/16 socket (for loader bolts) and a screwdriver in my tractor toolbox. For maint & repairs my tools are in the basement. I'm heading to the "farm" in Maine friday, what tools should I pack? I think it was discussed before, but I can't find it. I've never broken...

hazmat\'s got a camera.... Any tips? Finally bit the bullet & bought a camera. Got a Sony cybershot DSC-P7 at the local sony outlet. Here's a shot of my overstuffed garage. The cutter is going to Maine this weekend. How do y'all stay under the 100K limit? Shoot it low res on the camera...

Y\'all never told me how much FUN a rotary cutter is Just picked up my new Woods Brush Bull 48. Bought it to cut the fields at my parent's new "farm" in Maine. Of course I had to take her for a spin when I got home - So out to the woods to clean up the "trails". What a trip - If I could...

The back is easy - I've got a nice clevis on the drawbar to run my chain thru. What do you guys use on the front? I was hoping to loop a chain thru the front bumper, but the loader bucket is getting in the way. I need to pick up some binders at my dealer, so of course I'll ask what he...

Turfs or R4s for Field mowing? - I\'ve got both I've got a set of each - started with R4's but they tore up my lawn. Dealer made heck of a deal on turfs so I bought a set. My parent's just bought a "farm" in Maine - is it worth switching to the R4s for mowing (rotary cutter) the fields (8-10...

I'm pretty sure Solo is using front weights & Don is using his FEL for counterweight when using a rotary cutter. I've got a 48" woods brush bull on order. I see the benefit of using the FEL for knocking down brush & in "unknown territory". The field I'll be mowing is well maintained & I...

Parents bought a "farm" in maine. 30 acres total: 8-10 well maintained fields. Picked up a trailer on friday & have rotary cutter on order. wooo hoooo - my tractoritis is advancing to the next stage. Found this link U Maine This old Hayfield which recommends mowing 3X per year. The...

Anybody got one? PT lists it for $600 on their web site for the PT180. Do you think I could adapt it to my 4.0GPM New Holland TC18? Does it oscillate side to side? or do you need to reposition the tractor? I'm sick of digging / axing / wrecking my (old) chainsaw trying to remove stumps...

manual says to change both every season. Is it really required? I've done 145 hours this past year.

Don't plow your neighbor's field. he's libel to ram you. yahoo oddly enough tractor jousting

Hey gang, My parents have put an offer in on a place in Harrison, ME. Can anybody recommend a lawyer in ME to review the purchase & sales agreement & other associated papers?(preferably in Cumberland County). There is a view easement for the neighbor that they are a little concerned about...

Who makes 52-54\" rotary cutters? Parent's made an offer on a farm in Maine. Might need rotary cutter soon & trailer. I figure 5' is too big for my TC18. Wondering who makes a 4 & 1/2 besides midwest. Or maybe I'm better off with 4' even Big Picture...

There is so much good information on this site! However, as our community grows, it is getting harder to dig up the info. For example, a search on rotary cutter yields many hits. What do y'all think about a new section for TBN? It would be sort of a technical FAQ section. Topics I can think...

Has anybody purchased the cover for the Landpride spreader? How much? (Got my dealer looking up his price now) Do you like it? The monster agitator really stirs the stuff up & creates a dust cloud out the top. It was even spitting the pellets out too. Landpride advertises the cover as...

I did a search, but came up empty. I'm currently demoing turf tires from my dealer. Either I will buy them (If I can get approval from the CFO ) or I will be taking them back soon. Either way, I'm going to want to put my R4's back on the tractor at some point. Just rolled one up on the...

I'm going to demo some this weekend. See my thread Dealer continues to make the difference. The R4's are ripping up my lawn. Just wondering if anybody else has them & what they think. Might be able to get them "cheap" don't know how much "cheap" is yet. Don't know if I can get approval...