Search results

Results 1 to 39 of 39
  1. H

    Century 2535 - need a new head

    I ended up buying a brand new water pump. Installed it yesterday, filled up all the fluids and she started right up. Sounded Great as it was idling and then the radiator starts spewing. There is a crack up by the base of the cap. Does anyone know of an aftermarket or generic radiator that...
  2. H

    Century 2535 - need a new head

    It’s the piece that attaches to the water pump and goes into the block. It’s Aluminum And cracked all the way through on both sides
  3. H

    Century 2535 - need a new head

    Well the saga continues. Took it out this weekend to do some work. It ran great but noticed I had a coolant leak. Turns out that this part is cracked. Does anyone know what part # this is? Is it specific to this engine or would I be able to go to any tractor dealer and get one?
  4. H

    Century 2535 - need a new head

    Finally got it back together. After a few tweaks it started up and is running. I didn’t get the chance to do anything with it today but it sounds great.
  5. H

    Century 2535 - need a new head

    Not yet. He is supposed to come this weekend so we will see.
  6. H

    Century 2535 - need a new head

    Waiting on My mechanic to put it back together. Holidays so hard to get him over here.
  7. H

    Century 2535 - need a new head

    It did. 4 cracks total. I was tilling my track and it just started boiling over. It looked like a steam engine. It had never run hot before that which was odd. I will post pictures when I get back from picking it up tomorrow.
  8. H

    Century 2535 - need a new head

    I actually did have a picture of the cracks.
  9. H

    Century 2535 - need a new head

    I am picking it up tomorrow. I didn’t take any pictures of the cracks but will try to post some of the repair.
  10. H

    Century 2535 - need a new head

    Dropped the head off to a guy who was recommended by the dealer I bought it from. He is confident he can repair the cracks. Now I have to hunt down gaskets and a Thermostat. fingers still crossed but I am a more optimistic that the tractor will be useable again.
  11. H

    Century 2535 - need a new head

    Aestral now you have me wondering. If I can somehow get someone to fix the cracks in the head or find a used one are there the parts available to put it back together? Gaskets, valves, etc?
  12. H

    Century 2535 - need a new head

    Asteral thank you but I just got off the phone with Branson USA. The part # you list is for the Cummins A1700 and will not fit the 3T90L according to the gentleman I spoke to.
  13. H

    Century 2535 - need a new head

    Can anyone recommend where I can find one of these knowledgeable techs?
  14. H

    Century 2535 - need a new head

    So will the Cummins A1700 drop right into the 2535?
  15. H

    Century 2535 - need a new head

    I was told the Branson 3510 had the same exact engine but I have not been able to find any of them laying around either. The TYM parts guy I spoke to did not mention the later Branson’s as being an option though.
  16. H

    Century 2535 - need a new head

    Thanks for the tip. I will reach out.
  17. H

    Century 2535 - need a new head

    So we have established getting a new one is not possible and that the old one is beyond repair. I was also told today that there are no options for dropping in another engine directly and retro fitting one would cost more then the tractor is worth. Does anyone have any advice about selling it...
  18. H

    Century 2535 - need a new head

    I am not opposed to an engine swap but I don’t even know where to begin finding one that would fit. Any idea what it may be worth to salvage? I dont want to part it out.
  19. H

    Century 2535 - need a new head

    I took the head to a machine shop today. Unfortunately they said no way. Too many cracks that are deep and right next to the valve. so Now what? Salvage yard? Try to get a new crate motor? Any ideas if there is a motor that would just drop in? I am at a loss so any help would be greatly...
  20. H

    Century 2535 - need a new head

    Called TYM directly and they confirmed no more new heads. They were great and actually called around to some of the bigger dealers but no one has one. Guess fingers crossed that it can be fixed.
  21. H

    Century 2535 - need a new head

    I was told that is not the same head and will not work but thanks
  22. H

    Century 2535 - need a new head

    It is a kukje 3T90L but thanks
  23. H

    Century 2535 - need a new head

    I am taking the head to a machine shop tomorrow to see if it’s repairable. I called a different Branson dealer and they recommended trying to fix it first but did say there are parts still available. It is the Kukje 3T90L engine.
  24. H

    Century 2535 - need a new head

    Thank you. I called a big Branson Deater in GA to order parts. They called Branson and were told that Branson can no longer get a head and parts for Century 2535. I am in disbelief that this can be possible. Anyone have any suggestions? As it sits I now have a paperweight if I can’t get a...
  25. H

    Century 2535 - need a new head

    Tore it apart today to replace the head gasket and there are 4 cracks in the head. Anyone know of a source for a new head?
  26. H

    new to me 03 century 2535

    OP would you mind sharing where you got the head gasket from? I believe I blew mine today and can’t seem to find a parts source.
  27. H

    2535 issue

    I am having an issue with my 2535. It starts and idles fine, but once I go out to cut my fields it starts losing power. If I dont pull in the clutch it will stall out, but eventually with the clutch in it will regain the revs. Yesterday it wouldnt even start so I thought it was a fuel issue...
  28. H

    3-Point Hitch  trouble shooting 3-point hitch

    I am having an issue with my 3 point hitch system. It will not move. It wont go up nor down. The hydraulic fluid is full. The lever moves, but the system does not. I have no idea where to even start. Any help/idea's would be great appreciated *** please disregard. ****
  29. H

    Oil & Fuel  fuel system issues

    My 2535 keeps cutting out on me and I believe its a fuel system issue. While I was changing the fuel filter I turned the fuel lever back to the on position and nothing came out. I believe this would mean that maybe my tank has a blockage. Any suggestions on how to trouble shoot this without...
  30. H

    Starter problems

    My 2535 wont start. I checked the battery and its fine as are the connections. How do I figure out if its the starter and eliminate all other possibilities before I go and order a new one?
  31. H

    FEL Joystick help

    I was moving snow around and something went on the inside. I removed the boot and noticed that one of the Y pieces coming off the hydraulic hose broke off and the pin came out. How do I fix that? Do i have to replace the whole hose or is there a way to just replace the Y and get a new...
  32. H

    Century 2535 parts

    I am looking for a front rim for my 2535. Any suggestions on where I can find one and if anything else is capable?
  33. H

    Century 2535 parts

    I am looking for a right side front rim. Anyone know where I can get one, how much or if another brand would be capable?
  34. H

    Century PTO problem

    I have a 2535 and was using a brush hog today to mow a field and hit a rock that I did not see. After I hit the rock, the blades were still spinning but they seemed to have lost all their power. The shear pin on the brush hog did not break(bolt actually bent) it actually bent, and the PTO is...
  35. H

    Box Scraper  Box blade help

    I am looking for a box blade type of attachment, but I want the scarifiers but not the box. Does anyone know where I can get a 4-5ft attachment? I need to tear up some clay based soil but I really do not want it to be smooth. Its for maintanence of a motocross track but I can not find this...
  36. H

    hard starting 2535

    I am having a problem getting my 2535 to start after its been sitting for a while. It turns over, blows lots of white smoke but it takes about 4-5 miinutes before it fires. When it does start, it clears right out. It seems like its a fuel issue but I bleed it and it appeared that it was...
  37. H

    Oil & Fuel  Century 2535 fuel leak

    I have a fuel leak on my tractor. It only leakes when it is running. I have looked, but can not figure out where it is coming from. It doesn't appear to be the line. Any thoughts, suggestions?
  38. H

    box scrapper v disks

    I have a Motocross practice track on my property that is clay based with about 8in of top soil. Right now its like riding on concrete. My question is what would be better to turn up the clay with? A set of disks or a 6ft box blade? I have a 2535 century to pull it with. Both implements are...
Top