Search results

20 inch Kobalt, 2- 80 volt batteries, 6 years cutting trees for fire wood.

Cylinders are not bulged??

I ordered boom cylinder kits from Messicks for my tc30 loader, they are the Ognibene seals, for 293.00 for both cylinders. A friend steered me to McMasters- Carr, for the exact Ognibene seals for 132.00 for both cylinders. Don't understand price difference. This is also on tractor forum.

Boom will only lift bucket of dirt 2 feet off the ground. I lifted a bucket of dirt 2 feet off the ground and propped it, I then disconnected the hydraulic lines, then I removed the prop, so far in 2 hours time the boom has dropped about 3 inches. My question is, is that enough leakage to keep...

Do you have witnesses that he started the fire??

Your neighbor might have insurance. talk to him.

37300-14500-KIT- Kubota CLUTCH KIT

This is a good link 37300-14500-KIT- Kubota CLUTCH KIT

Does anyone know about Farm Tractor Supply ???

That is true.

Thank you, I already paid and received the more expensive parts.A tractor dealer here says they buy parts from Messicks

Thank you, I need to do this by myself, as there is no one around to help.

Ok, Thank you.

Bought clutch plate and thrush bearing from Messicks 197.00 for clutch and 51.00 for the bearing. Could have gotten clutch for 74.00 or clutch, pressure plate, thrush bearing and bearing for 144.00 From FARM LAND TRACTOR SUPLY. Below. 37300-14500-KIT- Kubota CLUTCH KIT (0) Reviews: Write first...

Thank you, good idea. Do I need to take the fel off to split the tractor.

I don't ride the clutch, but I think I need some play in the pedal.

From being a teenager, I have always worked on my vehicles, motor replace, clutch work, etc. I have never worked on a tractor other than front seals, bearings on the 4 wheel drive. I have a shop building with plenty of space, plenty of tools, I don't have a clutch plate line up tool. I have a...

Thank you.Getting parts for 2000, L2500 Kubota with FEL, throw out bearing and clutch replacement. Dealer wanted 2,500 to 3,000. My first time. Will look at some youtube. Any advise on this procedure.

Getting parts for 2000, L2500 Kubota with FEL, throw out bearing and clutch replacement. Dealer wanted 2,500 to 3,000. My first time. Will look at some youtube. Any advise on this procedure.

Thanks Maverick

Getting parts for 2000, L2500 Kubota with FEL, throw out bearing and clutch replacement. Dealer wanted 2,500 to 3,000. My first time. Will look at some youtube. Any advise on this procedure.

If your tractor is newer with computer, by all means disconnect pos and neg cables. My 2000 Kubota does not have computer and I have done lots of welding and no battery disconnecting and no problems.

I had VPN on. Turned off and no problem. Anyone know why Tractor Forum is down? Says page is not working.

Today, my 2000 Kubota L2500, when pressing the clutch, it makes a squealing sound. It has never done that before today. Any ideas?

Thank you, it has been too cold to mess with it.

That is a great idea, Thank you very much. I will do it tomorrow and let you know the outcome. Do I really need to cap it, as I don't have any caps.

No, kit only. I can watch youtube and do it myself. Messicks has seal kits 51.00 each.

Thank you, Messicks has them. I will watch some youtube how to, videos.

Like yours mine would not start and after several days looking for the problem I found a loose wire on safety switch under the seat, also on mine the seat belt has to be engaged or it wont start.

Are you saying it could happen?? What do you think about seafoam for cleaning injectors?

Could a leaking injector cause a hydrolock??

Thank you, ebay did not have them.

Thank you

Thank you

Thank you

Thank you

Thank you

Thank you

Thank you, sure beats 250.00 each.

Thank you

Thank you

Thank you. I will use the Manualskart.com. My tractor pin number is HK34733 and the closest they have is HK34732.

I adjusted the lever right side of driver. PO had the stop set and I moved it further so the arms would lift higher on the 3 point. No weight on the 3 point lift, when at it"s highest the boom arms are very slow up and down. Boom can lift and dump at the same time. If I let the 3 point drop an...

There is no blowby. Black smoke at startup.

Mine did the same thing, it would not stay in float. Mine is exactly like yours, I took the blue cover off and noticed it would stay in float position. When I put the cover back on I noticed the joystick was hitting the cover, I took a round rasp and filed the cover down a smidge where the...

3 point lift arms were not going all the way up, PO had the stop a little before highest point. I readjusted the stop so it would lift all the way up. Several days later I was doing some dirt hauling with the bucket and noticed the boom was very slow going up and down, had to put it in float for...

Messicks has the seal kits from 51.00 to 139.00 all of them are for the 7308 loader lift cylinder. I will call monday and find out why the different prices.

I can kill the engine and immediately start it again and there is a puff of black smoke, I know this is fuel but why??

I can't identify all the seals, i have never done this before, i need to be able to order the kits for a 2004 New Holland TC30 with a 7308 loader, boom cylinder kits. I have gone into Messicks, Herculesus and cannot find what I need.

Could not find hydraulic cylinder seal kit for 2004 new holland 7308 loader, boom cylinder kit.

Thank you, called a hydraulic shop and they wanted same price 250.00 each. Is there somewhere to order online?

I have to put new seal kits in my boom hydraulic cylinders and the New Holland dealer wants 250.00 each kit. Is there somewhere that is cheaper??

I'm going to try this first, hopefully it will work. Bar's Leaks Oil Seal Engine Oil Burning & Leak Repair Additive, 16.9 oz

No blowby

Thank you. Im trying to stop[ the blue smoke.

This is a link for a concoction to stop startup blue smoke. Don't think I would trust it, especially putting planters cashews in the engine. LOL

It worked, Thank you. Do I have to take the valve cover off to check the PCV ??

Do I have to take the valve cover off to change it ? At startup I'm getting a puff of blue smoke , which is oil, so I think hopefully it is the PCV. Nothing comes up on the link you listed.

Is there a PCV on a 2004 New Holland TC30 Tractor??? Thank you

Thank you, I will give it a try.

Spool valve is good. I switched the hydraulic connections from the boom to bucket and the boom arms still will not stay down when curling the bucket, and the curl is still strong on the boom connections. It must be boom hydraulic cylinders need rebuilt. Seems odd that both cylinders go bad at...

You are way over my head. I have never worked on a spool before.

With a load in the bucket and lift up several feet it does not bleed off over night.

Is valve body and spool the same thing? I rechecked the lift capacity of the loader and noticed it does not lift as much weight as it used to. A full bucket of firewood was never a problem to lift at any height, now it struggles to get 4' off ground.

When boom is up it stays there, no bleed off. Very strong lifting. I took the joystick cover off and turned the set screw 3 turns in and no difference, then 3 turns out, then 6 turns in and out and no difference. None of the cylinders leak. Is there an adjustment on the pump.

It is not in float mode. It also wont stay in float mode.

The bucket cylinders are good, it will curl but when it does the boom cylinders back off, maybe thee boom cylinders are bleeding off????

I have owned it a few years and now the curl wont lift the tractor. When it curls the boom raises. It just started not working a couple days ago.

2004 New Holland, Hist TC30. Bucket on ground wont curl and lift wheels offf the ground. Any ideas, why not??

Any tractor other than JD, they are moving to Mexico, that means JD employees out of a job and cheap Mexican labor. I'll never own a JD.

I've had mine 8 years and no problems. It has been used and abused.

I saw a pic of one but can't remember where.

Man!!!...Your Harley is really Fast!!! You were hauling ass when I passed you!!"

Only 432 hours on tractor.

Thank you

Thank you

Thank you

MY 1999 HONDA VALKYRIE INTERSTATE BIKE AND TRIKE. 6 CYLINDERS, 6 CARBURATORS, 1520CC, 102 HP.

I have a 1999 Honda Valkyrie Interstate, made in the USA in Marysville, Ohio, with 350,000 miles, bought new, never been into the motor, just normal maintenance and still runs like new and will wax a Harley. I put a magnet under my bike to trip traffic signals but I had to take it off, every...

You are exactly right. Mine are Zebo Tech. I made a mistake on original post, mine were 3000 for the pair.

Thank you. The groan noise is about a second long. I disconnected the double brake so I could push individually and it groans both sides. I put it in reverse and road the brakes several times and then back to forward gear and noise went away for about 5 minutes of normal braking and then started...

Bump

Anyone have manuals for 2007 TC30 that they could post a pdf??

Exact same story here, Profound loss both ears. cheap aids are nothing but amplifiers. mine cost 1,500 per ear, programable to my loss. I have had them 15 years and still work as new. If they are not in my ears they are in my moisture removing case.

I've had aids 20 years, at first I could not stand them, too noisy, pissing in toilet sounds like Niagara Falls. You will hear things you've never heard, that is normal. wear them every day and eventually all will be good.

parking brake engaged, trans in neutral, gear in neutral, lights off and it still beeps. if i leave and come back and touch the tractor anywhere it starts beeping. that is weird.

Mine does exact same thing. In neutral High, Medium, Low gear is set in neutral. 1,2,3, R is set in neutral. Parking brake on, pto off,key off, bucket down, lights off. beeps on and off 24/7

Deciding on color for braces.

I was actually just playing with it sense I got the new wet sandblaster. Didn't want to put much time in it.

What does my pics have to do with anyone else?

I had a custom cabinet shop for 42 years and I suggest you find a reputable cabinet shop, you will get better quality and less $$$$. I built all the cabinets in my shop and then took their existing cabinets out and installed the new cabinets the same day, stained, lacquered and countertops.

Not finished, but almost

What cutting wheel did you buy?

I had to crop the pic.

Have to wait till it dries to paint the gear area. Gloss Kubota paint shows every dent.

I have taken all my pics with the same phone and I tried to re-post pics that I have recently posted and it will not post them, same message appears.

This is what I get and I have posted other pics same as these. Couldn't find that... The uploaded file is too large.

This is what I get every time I try to post a pic, (((Couldn't find that... The uploaded file is too large))). I have posted other pics, what is the problem?????

Tractor forum

I would like to see post from ones that have actually wet sandblasted.

I wet sandblasted 12- 50 pound bags of play sand and there is absolutely no dust in wet sanding. A power washer puts out much more water than sand.

There is no need for mask, no dust. The play sand out of the bag is fine enough does not clog.

I thought I could get the paint local. I had to order it thru Home Depot, wont be here till the 17th maybe sooner???

Been raining off and on past several days. Finished wet sandblasting this morning and then primer coat put on. After sandblasting I used my leaf blower to dry and no rust. To keep my sand dry I drilled a 7/16 hole in the 5-gallon lid and ran the sand feed tube thru it. I used a total of 12...

Use play sand.

-I use play sand, very dry, will not clog and cheap.

I'm doing a brush hog and there is no rust.

Mine has no rust after drying in hot sun

My Pressure washer adds 3,300 PSI to the mix, a lot more than air. Go to youtube "wet sandblasting" For me I will never go back to grinding, air sandblasting, or chemicals. Less time, less work.

Wet sandblasting my brush hog with a 28.00 Amazon wet sandblaster. Wet sandblaster well worth the money. Will paint Kubota orange. Next project is to wet sandblast the smoker firebox surface rust on 3/8 " thick sheet iron and paint. set sand in a bucket in back of truck, if sand gets wet it...

My wife thinks my tractors sexy. lol

The same thing I use on my Honda Valkyrie Interstate Bike and Trike

A lot of us have spent hard earned money on our tractors and other vehicles and we like to keep them clean and shiny. Some people take care of their things, and some people don't. I, as many others on here was taught to take care of our things. If I do decide to sell my tractor in the future...

This will probably really disturb you. I wash and wax all my vehicles.

I for one will lose a lot of sleep knowing you are disturbed. LOL

I used some ceramic called NU-Finish about 20 years ago on a 2000 white Chevy pickup, 6 months later it turned yellow and was peeling off. Never again. I wax and keep engines clean on my tractors and other vehicles. As others have said, I always make money on my vehicles, trailers, tractors, etc...

This thread is getting off track.

And what if seller does not have one, are you going to walk away ????

Bought it used, no manuals.

I went into both sites and could not find my tractor. New Holland YEAR 2007 - ENGINE N843-125300 - MODEL TC30

2007 New Holland TC30 when I push the brake pedal it makes a rough noise for about 1 second and goes away. How do you know when the brakes need changing, where are they and how hard is it to change. Thank you.

I got lucky, squeaky clean and tight.

Yes, I need to update.

Anyone have an owner's manual or know where to download a free pdf for a 2007 New Holland TC30 with a 7308 FEL???

What exactly was it that broke the axle casing?

Bought a 2007 New Holland TC30 a couple days ago to keep the Kubota company.

Great Pyrenees. She is a Great dog.

5 acres oak, hickory trees. Always limbs to pick up, especially after a storm. Forks on bucket to pick up large branches, smaller limbs by hand. I need the exercise.

All the person is asking for is your name, address, phone number. You ask for 100 deposit, he will send 70. He also will send CC for you to cash and have the money in hand. what is the problem. Take CC to bank, ask bank to check that CC is good before depositing. I have sold MC this way with no...

If you have Farmers ins, your screwed. Unless there are hole, holes, it is not covered. I had large hail damage on metal shop roof, not covered because hail did not make a hole. Im still fighting with Farmers on claim I filed 11 months ago. Stay away from Farmers ins. I canceled my policy. I...

Exactly. My homeowners did not raise any after tractor purchase, Ins said it was covered the same as my JD zero turn, log splitter, household items. As long as it stays on property.

My Ins is with Farmers, going to email and find out what exactly is covered on my tractor. Email so I will have the answer in writing.

Mine is covered in my homeowners Ins as long as it does not leave property.

I also have this posted on TF. Lost 2 pins to my ROPs, they are also same pins that are on the loader. I have searched to no avail, also searched by picture, nothing.

I ride a Valkyrie Interstate, 6 n2 6 also a Valkyrie trike

If your FEL is slow, take the boot off the joystick and check that all allen bolts at the base of joystick are tight. My bucket down tilt got from slow to not working, I finally took the boot off and one allen bolt had backed off 1\2 inch, it was not letting the joystick engage the tilt down...

I want to replace the valve on Mitsubishi 28HP with front end loader, with a valve that has float. I can't find any info on pump that tells GPM. anyone have an idea of GPM. Thank you.

What about the underside of the wood

I need to mention, main reason for rake is, last winter ice storm took down a couple large trees and hundreds of limbs on our 5 acres. I have cleaned up the trees and large limbs but still have a ton of small limbs, bits and pieces, 2"diameter x 24" long and smaller.

Yes, top link, A County Line Landscape Rake, 5'- 195 LBS

If I remove the drawbar and replace with chain will my 3 point landscape rake float ? My property is very rough, no way can I lift and lower constantly trying to use the rake.

I have owned mine for 6 years and have put it thru Hell and still works like new. From digging a 8 foot x 8 foot x 6 foot deep pit to lifting 20 foot x 16 inch diameter oak trees on to a trailer, digging up 36 diameter stumps. If it ever wears out I will buy another. Nuff Said.

Valley power, they might find a used one, no longer made.

Mitsubishi MT2801FD. Put the front axle gear case and king pin case on the tractor and did the smoke test. Drove around in 4 wheel drive for awhile, till started raining. Put it back in the shop and will check for leaks on the floor. So far so good. A big thank you to all the members that...

Got it all back together, now have to get help to pick it up and put in back of pickup and unload at my shop. Don't know what it weighs but can't lift it off the bar. Brought it in, in pieces. Will trim off gasket material after I torque the bolts, has to set up before tightening the bolts.

I have had the HF trencher for 5 years and would say abused it several times and no problems at all, still starts on first pull. Dug holes, dug up large stumps, picked up 25 foot logs 14 inch diameter with no problems, even picked up a 10 foot by 2 foot propane tank with 75 gallons of propane in...

My homeowners with Farmers covers my tractor as long as it is on my property.

For Mitsubishi 2801FD front axle gear case, oil seals and O rings. About a week before delivery. Will post when fixed.

All I need is oil seals but you never know, so I sent these part numbers and waiting forconformation.For MT2801D I have read the procedure many, many times, almost memorized, hopefully will go smooth. A lot of thanks to bmaverick 1-Bushing-05605-06040 1-Oil seal-0840 1060 759 1- O ring-1980 3174...

I got the Parts manual, Repair manual, and owners manual, earlier this morning, have been doing a lot of reading last several hours, so now I can do all repairs and answer all my questions and can get all needed parts. I can't even begin to count the hours I have been on internet and phone...

I have never owned a tractor before, that was reason for coming on forum. I don't have a clue about 4x4 Mitsubishi MT2801FD or any other tractor. You have never worked on a Mitsubishi like mine it is very rare. I can tear down a 1990 Jag XJS convertible V12, complete rebuild, rebuild hydraulics...

Thank you

Better for people to think your an idiot, than to respond and remove all doubt.

Fixed the leaks.

Zip ties.

More to it than just take apart and back together. Have you ever done it.

As many as it takes.

I need to know what comes off first.

I have never been charged to use my CC and no annual fees.

Mitsubishi MT2801fd 4x4 with loader Fluid running down on inside front left wheel. Need help on replacing oil seal, maybe bearings, I can see on inside rim where about 5 inches is being rubbed by something. Can't see that it is rubbing anything, maybe a rock or stick got behind the rim. If...

Never borrow anything you can't pay for.

Pallet forks for loader bucket, don't know what I would do without them.

Better for people to think you are a fool, than to open your mouth and remove all doubt.

For the past 10 years or so I started using my cc for everything I would normally write checks for, utilities, insurance, food, gas,property tax, etc. Each month I pay the balance the statement shows. Therefore I do not pay interest on the card, secondly, I get points worth cash, every 4 months...

I don't know how old you are but guessing you are late 20's early 30's. You need to grow up NOW, take responsibility, do the right thing, call the people you borrowed from, tell them you will deliver the tractor, if you have a trailer, if not let them come get it, Do Not do any harm to the...

As mentioned before, can you see light thru the rad from top to bottom, if not use air hose and clean from fan side thru rad. Does water run freely thru the engine block.

I'm the same way. The biggest reason that I bought the tractor that I did, is because I could tell the owner kept up maintenance by the way he kept the tractor clean, a 1987 that looks almost new. I have a 99 Mercedes a 90 Jaguar convertible V12 a 99 Honda Valkyrie Interstate MC a 99 Honda...

Spilled a gallon of diesel, it went under the tractor on the floor in my shop. How is best way to clean up, or how long would it take to dry.

That is not the point. Lets say I hook it up and does not work, do you think I would be able to return. They have already shown their true cdolors.

I will tell you this, Never buy from US AMPRIME TECHNOLOGY. I wanted to return as my tractor does not have a cig lighter to plug monitor into. This company has sent me 6 different emails, requesting me to take photos of box contents, photo of tractor, hook up camera and send photo of what is on...

Don't burn soft wood indoor fireplace.

Thanks for all the replies. Got a backup camera but sending it back as the monitor has to be plugged into a cigg lighter, don't want to cut wires as would void warranty. Want one I can power monitor and cameras into ignition switch.

I do have Wyze cameras, but mine need 110 power. Also have to be in range of my wifi.

Thanks for all the replies.

I have been reading, diesel engines should use G-05 coolant because of cavitation on cylinder liners. Have not taken apart to see iff it will accept a thermostat. Thank you.

No thermostat in my Mitsubishi MT2801 4x4 diesel. Anyone have a part number, also what kind of coolant do I need.

Has anyone priced 2x6x18'. I did. Need to replace floor on 2 trailers, a 14' tilt trailer and an 18' trailer. 52.00 for 2x6x18' each 41.00 for 2x6x12' each I can buy sheet metal for same or cheaper. Will wait till lumber goes back down, but will never be where it was. NEVER WAIST A GOOD PANDEMIC.

I feel like an idgit, Never owned a tractor before. Drove my Brothers JD but no loader. At the moment, clearing a lot of limbs from last ice storm, I have forks on bucket with chains and they stick out far enough to see. My tractor

Been trying to figure out a way to see what angle the bucket is when down low on the ground, can't see the sides or the front of the bucket. Thought of a mirror but no where to put it so it does not get knocked off. Got to be a better way than getting off the tractor and looking every time. Any...

Mitsubishi MT2801fd 4x4 Under the seat is a dipstick that says OIL, what kind of oil does it require, motor oil or hydraulic oil and what weight. Where do I check and put hydraulic fluid. Thank you

Would like to know if I paid to much. Thank you

New to the forum, I have a Blue Mitsubishi MT 2801fd with loader. From Oklahoma city.

I'm new from Oklahoma city.

Blue Mitsubishi 4x4 Mt 2801fd with loader, 34 HP. Very nice tractor, no dents in it, paint is original and in very good shape, no fading, was garage kept. I had been looking at tractors on CL for a couple years, so seeing what they sell for and they sell quick, this seemed like a pretty good...

Brand new to the forum. I bought a really nice Blue, 1987 4X4 Mitsubishi MT 2801fd with Vtech loader, came with almost new 5' Cimmaron brush hog and Boxblade. Been using about a week now, loader is very strong, it lifted a 250 gallon propane tank with 50 gallons of propane in it, out of a...