Search results

I don't think they will hold 83 gallons each. The tires on a RK37 aren't big enough to hold that much. 83 gallons total more likely, roughly 40 gallons a tire is the most I think you could put in there to cover the rim and leave an air pocket in the tire.

Personally I'd just keep running the reliable one till it falls apart. You know it, it has served you well. Replace what needs replaced when if it breaks and rock on. The unreliable one would be good trading fodder. You might see an implement or tool or something you want that someone might...

The chart is on the Kubota USA main website. Click on service and support tab then the maintenance tab.

It's been hashed out here and on other forums. Since the manuals were printed Kubota has updated their recommendations. Double asterisks on this chart refer to this change. I use Rotella T6 0W40 in my M7040. Kubota Fluids Chart

I had this problem on a 2020 built NX6010. You've gone through most of it but one switch I didn't see you mention is the brakes must be locked together, there is a switch on the lever that locks the two brake pedals together. It must be in neutral. PTO off. Brake pedal pressed, weight in the...

What's the engine oil look like? I'm thinking you probably have a leaking head gasket.

And when they start leaking, tube them and use them 10 more years.

Sounds like the dealer is throwing parts at it. Obviously it starts and runs, it just won't stay running. Could be as simple as a faulty fuel cap vent or loose safety switch. If they are troubleshooting by just plugging it in to their diagnostic tool and throwing parts at codes you might be...

I guess a question to ask is what have you ruled out? The 134 spec oil is pretty basic and there are many, many good products that would work well for where it is called for. What's it going in? At Tractor Supply the Traveller Premium Universal meets it, the Mobil Delvac on sale right now at...

Trailer thefts are rampant in my area. TN doesn't require they be tagged for personal use, steal trailer scratch off VIN and call it homebuilt. Arkansas requires tags, but are so lenient you can tag anything without being questioned. Scratch off the VIN, call it a homebuilt, and get a...

Camber, you don't need no stinking camber. https://memphis.craigslist.org/tro/d/tipton-trailer-axles-custom-fabricated/7369483510.html

Yes looks like a Wicked 55". I use a cheap bungie cord to hold the hoses up that I connect to the loader tube (cross bar that says Kioti in your pic). The bungie keeps them out of the way but if they get caught it will stretch / break before the hoses so I kind of see it as a fuse.

EA Wicked grapple and a Woods Brushbull to boot. Nice setup!

If I was looking for a disk for a 3020 and for what your are doing I'd be looking for a pull behind and not a 3 point.

It’s a huge file- satellite internet probably is your problem.

Here’s my take - approaching this person who bought it has no upside. 1 It’s kind of creepy. You sold it. Let it go. 2 The new owner may be very well satisfied with his purchase. All you will accomplish is make trouble for him.

@kittyhawk You are correct they show 2 speed, but every video the dealers themselves are putting out with descriptions and reviews clearly show a 3 speed transmission in them.

L47 and even more so M62 outclass anything else in that size. A regular compact tractor with a hoe isn’t even in the same class.

Yep. Wouldn't have to go all the way down with it by hand, but I'd want to really get a good idea of what I was dealing with before I took it down all at once. Hate to find out it was holding the wall up the hard way.

I'd rent a man lift and take it down from the top by hand.

I’ve done business with H&R- they were straight up with me and my experiences were positive. Also I would have chosen the BushHog as well.

Bad Boy isn't manufacturing those tractors. Kukje manufactures the tractor in Korea. Bad Boy uncrates and assembles them. https://badboymowers.com/news-and-media/bad-boy-news/bad-boy-mowers-expands-product-line-to-included-compact-sub-compact-tractors

Have you tried shorting the starter solenoid directly to the starter in order to crank it? It's dangerous in that you are bypassing any and all safeties and you can start it in gear, but you can start the tractor.

6 plus/ minus acres. They are in full stride now.

Down here, we'd burn it. Where you are you certainly can't so that stinks. I would think that there would be a landscape service with a large vacuum truck perhaps you could hire to suck up the pile and haul it off.

Totally agree that there are plenty of good heavy duty grapples out there. I agree its irritating to have to pay and wait. If I needed a grapple for a skid steer, track loader or a similarly capable big tractor I'd likely not order from EA. The original poster as well as many of us on this...

That Titan is an imported unit. It is not made in the US. I picked mine up from them directly and all they have is a warehouse and a website. It is soft steel and doesn’t compare to the EA one. I can say this because I bought the titan first trying to get a bargain. It bent easily and I had to...

Steel is going through the roof and in our industry (auto parts and supplies) we are seeing price increases roughly monthly. The EA wicked is a hell of a grapple and you get what you pay for.

Coincidence- those just grease the pivot point of the front axle housing

If you push up on the trusses from below you're to likely just destroy them / rip them loose. They have strength from a load pushing down as they are sitting on top, not vice versa.

There is what is called the modulate valve assembly on the right side under the cab. If you follow the two hydraulic lines that come out of the pump one goes to the loader SCV and the other goes further back to the modulate valve. The valve that activates the 4wd and the valve that activates...

According to JD Parts, no draft control.

Yes that would be a great product for what you describe. It is just glyphosate with imazapyr. I would add just follow the label on rates and how to apply. This isn't a "more is better". The Imazapyr can travel through a root system and it will smoke a tree if your not careful. The RM43 is not...

Definitely a Chupacabra

Hate that the first reply was a troll. Yes factory JD cab is a Godsend if you have allergies. It will stay as tight and clean as the effort you put into maintenance. Yes there are lots of openings but they will all have boots / grommets to seal them. Just check them every once in awhile and...

Double pilot check valves would solve it. https://summit-hydraulics.com/product-category/valves/check-valves/

Berryman's is in Arlington, TX. Absolutely no connection between their B12 Chemtool branded products and the grease manufacturer Chemtool, just a coincidence in names.

Here's the thing. What the EPA is doing isn't going after the high rollers (NASCAR, Indy) - they are going after the grass roots side. More importantly the side of the business that is made up of a whole bunch of blue collar small businesses. They are going after Joe Citizen who always dreamed...

Proves this thread is about trucks or lubricants on TBN?

No. Installing the hydraulic kits won’t void your warranty.

Aw heck if you also have a 4wd Tacoma I wouldn’t think twice about a 2wd 3/4 ton diesel puller.

Original poster said Duramax. Another poster got us off on tangent about the transmission.

2005 Duramax would be mated to the 5 speed Allison.

I had a 4701 - regen every 50 hours or so. I had no problems with it

How is introducing weed seeds with your pasture clippings going to keep weeds down in your garden?

I have no idea if this is available or anything about this company, just the result of the google search for the original loader for your model. Ford 7108 Loader for sale

Larger utility tractors like you are looking for are more available in my area than are smaller compact tractors. Deal wise is tricky because of a few factors. 1. Rising commodity prices along with other costs are driving prices up. A tractor on the lot today should be cheaper than the same...

Machinery Pete's site will have what is listed for sale now plus you can look up realized auction prices. Auction Results B7800

Hire out a bulldozer to make the air strip. Otherwise you're just wasting fuel and time trying to do anything with a small tractor.

Personally I'd bet on the come. Things are crazy, but I am confident the dealers all had their floorplan orders in that are delayed in being delivered. That is on top of the orders people are coming in to place deposits on. At some point the factories will catch up and these floorplan orders...

I’m sure the original poster appreciates that.

Did the 30K include tax? Did they tell you about the required insurance (KTAC) to finance it? Just a couple of reasons I can think of for the difference.

29,400 before tax. This was a L4701 HST, Loader, bucket, set of Landpride pallet forks, 2 rear remotes, and a true third function for the loader plumbed to the front. This was in the fall of 2017.

I had one for a few years. No issues. Pretty solid tractor. I didn't have any issues with the DPF. It's naturally aspirated (no turbo). Ran well for me.

L4701 has a DPF.

What you are seeing is the norm this year. Crazy world. I don't know what exactly he has in stock right now but he did have some inventory on the lot a couple of weeks ago - call John Kalb at Kalb Equipment in Memphis you might get lucky. His website does not list inventory so you'll need to...

1. A plug in or solar battery maintainer to keep the battery up. Watch for rodents / dirt daubers / birds building nests where they shouldn't. 2. What make / model of tractor is it? It should regen on it's own while you are working when it's needed. 3. Yes there are 3rd party, Woods is a good...

Looks like it’s set up for a quick hitch, so that’s always a plus for me!

Wide open.

There is probably somebody on your island with a 4020 or that works on equipment that would buy your pile of parts and consider them manna from Heaven. You just have to find them.

Normal. Bump up the RPM's to 1700 to 2000. HST needs some power to work, remember the engine has to be throttled up for it to pump the fluid. High range up a hill might not work out, if you start to bog let off the go pedal for more power, if you keep it hammered down it will bog / slow down...

You have to also factor in the economics of the dollar / won relationship and the trade deal we are currently in with South Korea (lowered tariffs). That accounts for some of the differences we have seen between the cost of South Korean tractor makes versus others in the last several years...

We (auto aftermarket) formed a PAC called C.A.R.E - Coalition for Automotive Repair Equality. https://www.autocare.org/government-relations/current-issues/right-to-repair All of our industry associations got on board and there are annual campaigns for contributions to it from all the members...

If you give it a go by putting a turbo on it be sure to start a thread entitled "I hate my tractor - 2021 edition" in order to document the process. It could be epic. The one one ten years ago or so certainly was.

Minimum wage in South Korea is right around $7.50 in US dollars. Their labor isn't that much cheaper.

EA wicked is a hell of a grapple for a compact tractor. I appreciate mine the more I use it. I've had cheaper ones I"ve broken and bent - the EA is like a Timex back in the day, it takes a licking and keeps on ticking.

Her maiden name starts with a C. Good people.

I take it SoInLineman stands for "Southern Indiana Lineman". Due to your stated age, occupation and location you don't happen to have an aunt whose initials are P.B. do you? If so, small world for sure. Used prices are high right now due to the shortages of new stuff. Good late model low hour...

If you are standing on the left side of the tractor - there is a panel right below the back of the hood in this screen shot I circled in red. Disconnect red + battery cable from the battery. Remove that panel. Take a picture of the wiring on the old switch so you can reference that you put...

Multiple layers upon layers of snafus have everything messed up. Covid shutdowns slowed things down, trying to get them back going with socially distancing / sanitizing / PPE etc slowed production down once it restarted. The whole time people are spending and purchasing like madmen on things...

Is this your cutter? https://www.kingkutter.com/l-72-40-p I can't find the specs on the blade tip speed. The faster the better for a cleaner finished cut.

2305 doesn't have a stellar reputation as it is. Aluminum rear end is thin around the PTO shaft area and can break fairly easily - so expensive you pretty much have totaled it at that point. Also has a problematic cooling fan for the tranny that is easy to break and hell to replace. Personally...

They went back and reviewed the drone footage the inspector viewed and clearly saw the crack before it fully broke. Inspector missed it twice.

Instead of winging it here is the link you can download the manual for free from John Deere. https://techpubs.deere.com/en-US/Search/Equipment I have it in PDF but it's too large to attach. If you have trouble downloading it I wouldn't mind at all emailing it if you think your email can handle...

Was it stored inside or outside? I'd check the engine oil and transmission oil both for correct amount as well as for any moisture / water that may be in either. If it's been sitting in the rain there is a chance there could be quite a bit of water in the transmission that leaked past shift...

That tractor should do you well.

A little fire is nice even when it isn’t cold out.

Yes look at pg 1 of this thread TX Jim posted the diagram for you

Not trying to be flippant, but with a tractor loader an indicator rod and seat time where you get the feel for your particular machine. You'll eventually get a feel for it and it gets easier. Dedicated loader machines (skid steer, track loader, etc) you have direct vision of what you are...

Interesting take on it that the shorter cables towards the middle stretched less creating the stress in the area the broke. Makes sense. https://wreg.com/news/expert-hernando-desoto-bridge-design-contributed-to-separation-fix-could-take-up-to-a-year/

Personally 6 of one half a dozen of the other. With the PRT you'd still be using your right foot on the foot throttle, your right hand would be on the loader joystick and your left hand will be steering and flicking the lever. You'd push into a pile, lift your foot up off the throttle and flick...

I don't get your line of questioning with the hydrostatic, the tractor you linked is a gear drive tractor that has a power reverser. So it has a wet clutch and you can change directions with the lever by the steering wheel without using the foot clutch pedal. The clutch is activated...

Doubt that. They started construction on it in 1967. At this point who knows exactly what caused it. The fracture is near the center pier so right smack dab in the middle of the bridge. The bridge itself is over a mile and a half long. The spans between piers over the river are around 1,000...

Bridge was built late 60’s. gets inspected every two years. This is a major headache to trucking. The other bridge here on the TN side leads to a restricted truck route. There is a low overpass (13’ 6”) on the section of I55 right after you cross going southbound. Trucks higher than that are...

NX4510 can lift more than 1,676lbs, way more.

Pre wired for rear wiper kit.

Alamo / Mott

The one the original poster pictured looks like a standard SSQA bracket - looks righteous to me. It is just an overall big grapple. At least 6' maybe 7' wide.

Bracket wise yes SSQA (skid steer quick attach) is SSQA - it should attach. One note about grapples made for skid steers / track loaders - they are generally very heavy which greatly reduces the amount of load you can pick up on a compact tractor. Also skid steer grapples will often come with...

I've got the AT101's on mine and I will say night and day difference on slopes. Stuff I couldn't mow before now I can. Of the two you listed I'd opt towards the Carlisle one. The other certainly would be aggressive but I would suspect it would also ride rough as well as be pretty hard on the...

Also, not sure if your tractor has it or not, but if you have a draft control by your 3pt lever you might try experimenting with it so that it will raise your plows up a little before you stall out. It will drop them back down once you regain some traction.

Are you running the RPMs on the engine on up there (at least 2000 rpm or better)? Second thing, hydrostats are funky in that when you start to bog down you have to let up on the go pedal for more power - mashing it down further will stall it further. It is counterintuitive, especially if you...

You know a Kubota B26 would be right up your alley too. https://www.kubotausa.com/products/tractors/tractor-loader-backhoe/b26

2 machines - compact track loader / skid steer and get a good zero turn to do all of the mowing, field included. I'd get grapple for the track loader/skid steer as well as the regular bucket and a rock bucket. You can rent a trencher attachment for it when doing your drain lines as well as a...

GreatStar is huge. They are a big supplier of private label tools.

My NX6010 is exactly the same - hasn’t been an issue.

The cab on those has a bunch of common parts with a broad range of years of Deere. you can get everything you need for the cab refresh aftermarket no problem. Those are good, heavy built tractors.

There is a module in the cab that controls all the safety. Mine is a hydro as well. There have been more than one of us that this module has gone out on. Those of us that have had a bad safety module pulled our hair out checking switches, fuses, relays etc. The thing about the safety module is...

FWIW my NX6010 only has one filter. There is no inner filter. Googling "FP g070020" indicates that number refers to the whole housing.

Read all the way through this thread. https://www.tractorbynet.com/forums/threads/nx5010-trouble-with-safety-switches.429483/

Well, my 2020 production NX6010 HST with 47 hours just started doing the exact same thing. Checked all the safety switches, can't find any problems. Checked key switch with meter, checks out ok. Checked out battery with battery tester (load test) checks out fine. Checked the ground and positive...

Update - it appears my heat issues are under control. I also was able to finally get a third function back as well. I ordered a D03 subplate sized valve from Summitt. They listed it as rated for up to 15gpm so I took a chance on it. The factory one from Kioti was only rated at 10.5gpm. Since...

Hard line into modulate valve larger than the 3/8 coming out. Shows both hardliners out of pump the same size. Hard line that drops down from cooler to below the alternator hooks up to a larger diameter hard line that goes into the hst filter.

I have extendable lift arm ends so they were easy to take off. I used a cat 1 to 2 bushing clamped in my vice and was able to rig up my ball ends on the bushing to hold them square. I ground some off each side with a 7 grinder. Used cat 1 to 2 lift arm bushings and installed as normal.

Some things I've learned. Looks like the hydraulics are all BSPP thread. I've confirmed with micrometer and thread pitch gauges. The linked specs from the valve manufacturer confirm this. The ports on the third function valve are 3/8" BSPP. The port coming out of the loader block power...

It was the factory 3rd function. Same ambient conditions- mowing where I left off. I had 210 as high as 220 at the rear remote valve with factory fluid and the constriction of the factory 3rd valve and lines. This afternoon I had 169 at the valve after returning to stock, changed filters and...

If you have a NX series I'm curious of those who have noticed elevated hydraulic heat levels - do you or don't you have the factory third function installed on your tractor? My theory is the factory third function, at least the one that was installed on mine, is a major contributor to the...

Same engineers who came up with the 3rd function valve I suppose. Restricting the flow with a couple of step downs between the power beyond on loader valve to the 3rd function then again from third valve to line that feeds the rear remotes and 3 point? Great heat generators.

Pics of hard line and the dinky cooler.

Loading the tires tonight with -20 WWF. Also put some louvers in the hood right above the DPF. Can’t hurt anything to let some trapped heat out of there. I also put in a 180 degree thermostat and replaced the green coolant with Peak Final Charge. Ive only mowed so far and am concerned about...

Doing my comparisons it looks like a NX6010 Cab matches up as a fair comparison to the Kubota GrandL 5460 Cab. The Kubota engine is 4cyl and more displacement is the only big difference I can find. Am I on the right track? Also, what does the DK6010SE compare to in Kubota? Thanks!

Doing my comparisons it looks like a NX6010 Cab matches up as a fair comparison to the Kubota GrandL 5460 Cab. The Kubota engine is 4cyl and more displacement is the only big difference I can find. Am I on the right track? Also, what does the DK6010SE compare to in Kubota? Thanks!

Foam won't hurt your horses. It's just a mild soap / water solution. I mounted a Crop Care brand 2.5 gallon system to my spray rig (Fimco PTO 12 foot boom / 60 gallon). Sorry this is the only pic I had on my phone. I had a buddy weld up a bracket to mount it on top of the tank. I have mine...

He was a self employed agricultural irrigation installer / service tech. Mini ex rolled over on him while working on a center pivot. Pinned him severing one leg and mangling another, he bled out before they could extract him (had to use air bags to lift the machine). I believe he was thrown...

But does it cure frostbite and sciatica? (Sorry, I couldn't resist. Watching an Amsoil thread reminds me of an old time patent medicine pitch man at the county fair)

I printed off enough to send to my son's teacher for her class and thought I would share. http://www.kubota.com/f/safety/Coloring_Book.pdf

Mine quite working sometime yesterday. Figured it was slow connection at home but at work have fiber and it still times out never connects FYI. Though most of my computer problems can be traced to a short between the keyboard and the seat.

I'm not affiliated with this at all. I follow Mike Rowe on social media and he shared this from this shop teacher in OK trying to get a fabrication program off the ground. Again, I don't know these folks from Adam, but I do appreciate this teachers effort to try and buy equipment for his class...

I posted about buying this tractor recently and wanted to follow up with my first impressions. First and foremost I like it. I was expecting it to be smaller when I went and looked at it and it ends up being about the same physical size as my other tractor a JD 4120. I pulled into my shop...

I'm looking at a clean one, no loader, 4wd with r4's, little less than 900 hours. So far everything checks out. Anything in particular I should look out for or be aware of? Thanks!

Who knows what is under the paint and the price to me is insane (which is what caught my eye to look at the ad) BUT - this is a nice looking tractor so I thought I would share. Those R4's on the front give it a pretty wicked stance, this thing looks business...

I'm sure if you call he would say "road ready, I'd pull it anywhere" https://memphis.craigslist.org/grq/5102198410.html

Happy Canada Day! I'm not from there, but my country of birth shares a border with her so I shall celebrate with you fine folks of the North! Besides, as a quasi-alcoholic my motto is if you're not drinking with somebody or to somebody your just drinking - so today I salute you.

Wish I had thought of putting a lift in years ago. I do most of my own work and have the room, oh well better late than never.

The SOTV-B is the Toughest Pickup in the World and it's Made in the USA But You Can't Buy One. - Gear Heads I don't think my wife would go for it even if I could buy one. But it makes you want to really keep an eye out on the government auctions sites just in case.

I'm seriously considering going from 1 open station tractor with loader to a cab tractor no loader and open cab skid steer. My allergies are just flat killing me mowing. The cab L's and cab M's both look interesting. Without a loader I want R1's I'd like enough hydraulics for top and tilt...

Telemarketers, especially credit card processing telemarketers. I get a couple a week get through to me on the phone. Today in a bubbly voice they start their pitch on how they could save me money in credit card processing costs. As always I told them our business does not take credit cards...

I've been wanting a 6 foot tiller and finally found a good used one, actually barely used Landpride RTR 1274 It will be time to use it before we know it! Seller wanted 1800 I offered 1500. He circled back with me and I offered 1700, no steal but fair deal and got a good brand reverse rotation...

To get the efficiency the newer technology higher efficiency units need to breathe easier and more efficient as well. So practically if you replace a dinosaur air handler and outside unit with a 13 seer you see big improvement, but jumping from 13 seer to 15 seer with the same old ductwork you...

How old is your ductwork? You won't see a big difference between a 13 and a 15 with older ductwork done in sizing that was adequate when it was built ( like 20 years ago)

25 degrees sitting in a tree staring at the sun in beautiful crime free Blue Mountain, Mississippi

Accidentally making some decaf then taking a big swallow it is worse than swallowing a bug. They shouldn't even call it coffee or allow it to be stored in the same area. It's a fraud. Its a smell / taste combination you have to literally scrape out of your mouth - yickk.

2013 crew max 5.7 4wd Have put just under 27,000 miles on it. Very comfortable and haven't regretted anything or wanted for anything. No issues so far ( knock on wood) Hauled hay today.

I was mowing sunflowers late Friday afternoon and cut the left front 6 ply Titan R4 that came on my JD 4120. Found an old gang of disk blades and it cut that sucker clean through the tread and the sidewall too. Hey, it happens, just so happened at 630 PM the Friday night going into Labor Day...

Regular cab, short wheel base, Sport, offroad package, 5.9 gas V8, automatic, little over 100,000 miles so I ran a Carfax and the mileage jives as well as no wrecks show up. Was sold new and has always been renewed right there in the same 50 mile radius. Truck is DIRTY - but good tires and...

Spot sprayer, zip ties, gas blower, and malathion = redneck mosquito sprayer.

Hard duty but somebody's gotta do it I reckon, knocked out my chores before 9 this morning so I can sit on my rear and tend the smoker for the rest of the day:)

Took a TSC caryall, 55 gallon barrel, quickcrete, angle iron, scrap treated deck board ends, a bunch of old brake rotors and hub bearings, piece of chain I found in a field, a few other pieces of flat iron and 2 rattle cans of Cat yellow from TSC = this.

Fun fun fun

John Deere 790 That is a pretty good deal for somebody if it checks out as advertised.

Phone number and all looks legit for the area it is located in. Looks cheap to me for a new FEL - just passing it along. New Holland Front End Loader

One local, 4wd. They ran it out of fuel, turns over, wont crank. Tires bad, rest is in great shape. How hard to find and how much will tires cost? Worth buying for $500? Thanks!

Not pristine but could be had cheap I am sure http://memphis.craigslist.org/grd/4390672480.html

I saw the sun rise and set out doors. Saw it rise from a boat seat and saw it set from the seat of my tractor cleaning up after the ice storm. Patching fences = I'm gonna sleep good tonight!

Not mine saw it today and passing it along http://memphis.craigslist.org/grd/4354414512.html

I'll go get it Saturday. Hopefully will be planting some sunflowers later this spring.

This is pretty cool. They get a nice penny for them too. I have no affiliation with this, somebody posted the video on facebook and I checked it out. Anthill Art - Artistic and Educational Ant Colony Castings

For those that have never seen it. Picker builds and wraps the modules, a long way from pickers dumping it into trailers that people stomped down. That evolved into module builders and now to this. http://m.youtube.com/watch?v=ShQ6Zdb6-uQ&desktop_uri=%2Fwatch%3Fv%3DShQ6Zdb6-uQ Filmed by a...

2420 farm pro tractor That is a local number so probably legit.

For the last 9 years we have been to **** and back. You never got stuck and you never left me stranded. You had heart, and I wish you the best. Fair winds and following seas old friend. New truck, we have no bond. We haven't been anywhere we shouldn't have been, doing something we shouldn't...

This here is what on other forums called a karma. I am going to give something away for the heck of it, no catches, no hidden agenda other than I am bored at work. I'll set the time period - this one will end Friday July 19th at 7PM Central time. One entry per member, must have been a member...

18'ft 3-axle Pintle Hook equipment trailer Hitch her up to your F150, throw your back hoe on the back, strap her down and this sumbitch is ready to go. Yee haaa! Hold my beer boys and watch this!

John Deere 563 Loader Frame Looks legit, phone numbers listed are local. I have not a clue who this is, I am not connected nor responsible for loss, dismemberment, emotional distress, yada, yada, yada.

JD, bless their hearts, is a little bit confusing on the build your own and somewhat on JD Parts on what is what on the SCV options on these tractors. I have a 2011 4120 that i have so far installed the EH 3rd, the lever operated 4th and 5th, and the 3 rd function hard line kit on the loader. I...

Picked it up yesterday at Titan warehouse in Collierville TN. Brandon was who I had spoken to on the phone and he loaded me up. Great to deal with and if you have an opportunity to go pick up in lieu of shipping I suggest you do it, it worked out well. These babies were stacked to the ceiling...

John Deere Backhoe Mounting Bracket No connection, don't know if this is a deal or not, but I am sure someone here might could use it!

Which would you take to battle against this "road." FYI not my road just a trail ( map said county road, I say trail) I had to venture down this weekend.

Great show in Tunica MS tonight. We've been fans since his first album.

Won't be long, I'm itching to go! Anyone else chase gobblers? I was about out of ammo, thank goodness there is no run on turkey loads round here.

Got my home and 10 acres paid off recently so just like prisoners want to get back into prison I am itching to get all that dang money out of my pocket. Found a tract, 65 acres timber, good deer and turkey huniting area. Made them a verbal offer this morning. Within 100 miles of my house, I'm...

Happy new year. Up for grabs is a Woods engine block heater timer. Rules - reply to this thread and be a. TBN member before today. Winner drawn at random one week from today. Not required but a request, please post something you think could could help someone else out. Tip, advice, a funny...

6 years 10 months on a 15 fixed. My little 10 acres, home, couple of steel buildings / barns are all mine free and clear!!!!! 2nd home I've paid off in my lifetime. Only thing left I owe is on my current tractor, it was 48 month 0%, so I saved it for last of course. Oh thank you Lord for the...

2010 JOHN DEERE 2720, BACKHOE, LOADER & 4' CUTTER Ain't mine, came accross it surfing the net. Nice looking little rig though.

Good for boys and their dad!

Okra, boilt for a good little while. Celery, onion, sausage, flounder, red beans, a little rice, red pepper, garlic, etc. etc

Always keep a roll on your tractor / skid steer / etc. They are awesome for: 1. Wipe your hands. 2. "Glove" to grab a greasy hydraulic hose etc. 3. Hankerchief. 4. Paper plate to eat your lunch. 5. Toilet paper after you ate your lunch. 6. Bandana 7. Clean the dust off the windshield. 8. Clean...

College of the Ozarks tractor museum in Hollister, MO

Some of you folks probably see them every day, rare treat to see them in this part of Arkansas, spotted this one today while out with the family.

http://memphis.craigslist.org/grd/2995072464.html

With points got 70 gallons for 3.35 a gallon today. Oh yeah. Also got 35 gallons of unleaded for 3.05 a gallon. That should just about do me over a good chunk of my mowing this season.

Was reading thread on commuting and thought about a couple of farmers I know that I meet on the road in the mornings on the way to work. My wife and I choose to live in the country and I in return commute to the city to work to pay for our 10 slice of heaven. Their wives want to live in the city...

I didn't build it , I bought it this way but thought it was a good idea to share.

Clipped pasture after church and we were washing cars this evening so we gave her a wash while we were at it. Thought it would make a good picture, it ain't this clean that often.

Was this the last of the white painted Case branded row crop tractors before the switch to red? I drove one for two years in high school. For me it was a Cadilac going from a open station 4 post John Deere 4630 to the Case was a dream come true. Used it to plant and cultivate soybeans. Plant...

Last night wife and I were sitting in bed and we agreed we were tired, but the good kind of tired. Got up Sunday, got ready, wrassled the young un to get him dressed, went to church. Got home, fixed Sunday dinner and ate. Went outside and got stuff together to mend fences. Cleaned out and...

I've read the manual. I understand one is for light, one for medium, one for heavy. But is there any harm in leaving it in heavy hole all the time?

Saw this, if the engine / tranny is good might be worth it for parts to somebody. Like I said in title, I have no connection to this at all, just found it browsing local craigslist. RHINO TRACTOR

Lots of stuff to do but I can't wait to get there. Thank God for a good job but I never like leaving my babies. Prayers that all our soldiers, sailors, airman and my beloved Marines sit in one of these seats soon to see their loved ones and a merry and blessed Christmas to you all.

Must get it from his mother. Sweet boy, just a little feral.

Backstory. Got a call yesterday afternoon from on old widow lady down the road. 73, lives by herself, has a broken back and is house ridden. She has a daughter in law (also widow) down the road that checks in on her, but she lives by herself and works full time so can't be there 24 / 7. Me and...

Got some new neighbors. Neighbor beeing a relative term since where we are is very rural and houses or clusters of houses are pretty spread out. One of the oldest houses in the county is less than a mile down the road from our place. Neat old house sits on 3 acres now. Rest of it sold off long...

I recently installed the electrohydraulic 3rd SCV kit on my 4120. Kit part number LVB26032 Took about a little over an hour to assemle the valve body to it's brackets and to install it and the new hard lines that go to it on the tractor, pretty easy. Took two hours to install the wiring...

A big thumbs up for Jerry and for EverythingAttachments.com. I ordered a set of pallet forks that I had called about and were not in stock. I was fine with the lead time they gave me. Today I got an email they had shipped! I was expecting a couple of weeks before they shipped and was fine...

Everything else is in. Hopefully they'll get the loader on and deliver it come Monday or Tuesday

Beers that is. I like mowing, I like working in the yard / barn / pastures. So does my neighbor. I tend 11 acres and after I get done I have about 3 beers or so. He tends 3 acres and before he gets finished he's into his 11th beer. I tend my 11 acres once a week or so. He tends his 3 every...

Man showed up this past Sunday with cash money and a big trailer and drove off with my JD 2355 and JD 709. I ain't go a tractor in the shed so I'm jonesing to go grade the driveway, move some dirt, clean out the barn etc. If the tractor was there I'd be finding a way to sneak off and go fishing...

R4 tires, height of a 4120 with ROPS folded. Thank you!

One quote so far 26,000 using the 0% for 60. Waiting on the second quote. Is this in line?

I've got a 2355 Industrial / 2wd / JD 110 Loader and a JD 709 cutter trying to decide on fixing or replacing. The 2355 has 3,270 hours. Blows a puff of white smoke if you let it idle for awhile and give it throttle. I think the clutch is on it's last leg. The 709 cutter is heavily worn. I have...

My 2355 started blowing oil out of the front seal on the right hand steering cylinder when I turn right. Figured bad seals so I ordered the kit and replaced all the seals in the cylinder. Put it back together, same thing. I can't find a restriction in any of the lines on the two front cylinders...