What is the silver looking filter on the bottom

I guess my tractor has always been slow moving but now it has just stopped reverse and forward is very slow. It has been about 200 hours since the trans fluid and filter was changed. The tractor...

I am wondering if anyone has had any good or bad experiences with a Kubota BX2660.

Pulled my seat off and apart to replace the safety switch. Switch got lost in transit, I just received the replacement and not am having a brain freeze on how to reinstall the rails on the seat...

I have a fair bit of mechanical experience, (up to and including building my own race engines) but this seemingly small thing has me baffled! I have a Kubota BX 2660 which has a hand throttle that...

Stopped at AutoZone, Tractor Supply, and the local surplus store with no luck. Front tires arre 18" x 8.5" with a 10 inch rim. Rear tires are 26" x 12" with a 12 inch rim according to the guy at...

Hello all. As the title states I have someone that does not 'think' he will use the loader, and asked how much I would lower the price if I kept the loader, and removed the brackets. I know the...

Sunday, I mowed about 20 minutes. Got off the tractor to move a hose out of the way. When I tried to restart, it would not catch thanks to the wonderful safety plungers, this time on the pto...

Been wanting to put better suspension for the seat from the time I got it. My land is bumpy and this helps out a lot. I also put the new seat that a few of the guys got a while back, the seat is...

I put fuel in my BX2660 and the fuel nozzle was full of lady bugs. This was 1 1/2 years ago. After cleaning tank it ran good until this year. There must of been 3 to 6 I didn't get out. Had to...

I've been looking for the past few months at tractors and Sub Compacts, I finally found what I think is a good enough deal to pull the trigger on. I'm looking at a 2012 Kubota BX2660 with a loader...

Saw some stuff online---eBay, etc., just wasn't sure how to measure. This one looks too big: UNIVERSAL CHECK CHAIN STABILIZER TRACTOR 3 POINT HITCH 23"-25" | eBay This one looks too small: 2...

Major maint. tomorrow. Need to know how to bleed loader. Doesn't begin to load soon enough even when eng revs are up.

Tips for identifying and fixing intermittent power loss on a BX2660? My best guess at this point is algae in the tank and/or lines. But I'm open to other ideas. Power loss intermittent, mostly...

I believe I have finally isolated my hydraulic leak to be the rear PTO cover plate. It looks to be a pretty straight forward repair, but I thought I would ask to see if anyone had any good tips...

Hey everyone. Im the proud new owner of a 2009 BX2660 with loader and 60 MMM. I bought is on Wednesday for a pretty good price I couldnt pass up butof course it has a few problems I discovered...

StARTS BUT DOES NOT CONTINUE TO RUN. Temperature 4 above. Changed air filter,fuel filters. Now not starting.Lacking fuel flow. Do I have to prime fuel line? How?

Got a good start putting twin cyls on my BX2660 this week.

Have you guys had the left front rim actually break around where the lug bolts hold it on? My other three rims are doing just fine. A dealer used a battery powered hand-held drill(?) to install...

I went out and started the tractor this last week and when I tried to throttle up, the throttle handle turned, but it did not actually do anything. I'm thinking that there is a problem with the...

Unit came with R4's. Bought a set of turfs for cutting lawn and pushing snow as chains mounted better on them. When I do FEL work, I mount the R4's. That said, they clog up. Thinking of going to...

Seriously looking to get a B2601 with BH, FEL, & MMM. My BX2660 is a 2011 with about 550 hours on it, with FEL and 54" MMM, all in rather good shape, stored indoors, maintained, etc. So, I could...

I've had the 2660 for about 5 years, mowing mostly (54"MMM), but also building and maintain gravel driveways (FEL & box blade), general FEL work, and a little brush hog work with 48" LandPride on...

My 09 BX2660 with 270 hrs and 60 inch MMM is giving me problems with the mower belt. Last month, the belt climbed half way up the left pulley (as I am seated) and wore through the plastic pulley...

Hello Everyone, I am looking at a used Kubota BX2660 with Loader, 60" Mid Mount Mower, and Canopy for $13K from a private seller. Does this sound reasonable? I have seen others on here that...

Wanting to put in a garden this spring, I am looking for advice on which rotary tiller to run off the PTO of my BX2660? My other implements are LandPride, by they don't seem to carry tillers...

Hi. I recently bought a BX2660 and I also bought a BX23-BT600 backhoe. I know that I can't directly attach the backhoe (because Kubota didn't intend for it to have one) but I want to somehow find...

I have a BX 2200 that's in need of some work. I'm thinking of buying a BX2660 and was just wondering about how many parts are interchangeable. Are the engines similar etc? Would be good if I only...

I've got an opportunity to pick up one of these with very low hours at a fair price. Problem is I live in the middle of nowhere, have livestock that require daily care and handle the farm pretty...

drive shaft came disconnect off mower and pealed hydraulic oil filter and thread shaft out of housing. Does anyone know if there is a repair for this or do I have to replace whole transaxle housing.

It looks like a few of you on this thread have same tractor as me or have dealt with hooking up a linear actuator for your blower. I ordered one last week on Amazon , (6 inch throw , 200 lb) I...

Fun 1st post. I have a 2 1/2 year old BX2660 with a 60 inch belly mower that I bought new and it has been fantastic. I was mowing a steep hill in my front yard going forward up - I used to back up...

I cut about 2 acres around my house with my BX2660 and appreciate having cruise control but, when I set it, my ground speed drops perhaps 15% after I take my foot off of the speed pedal. Is there...

My BX2660 has around 280 hours. Bought it with 180 hours. I checked the front axle lube and it was low, changed and filled up. When turning in 4wd with a heavy load in the bucket it acts as if...

I've decided I need to get a disc harrow for my BX2660. Do you BX guys have any recommendations? I assume a 4 foot one would be the right size. It would probably lift and pull a light 5 foot...

Is it possible to run a 60" tiller on a bx? Or am I asking for trouble?

There is a large cap behind the injector pump marked "oil". I can not find any reference to this cap in the owners manual. Is this a second way to put oil in the crankcase (As opposed to the cap...

I just bought a 2009 BX2660 and in the process of changing all the fluids. The owners manual says that an oil and filter change requires 3.7 qts. When I put in the 3.7 of Rotella T-6 and ran the...

I'm interested in buying a rear finish mower for my BX2660. Will it handle a 60"? Or should I stay with a 48" one? The BX2660 has 19 pto hp, so I'm pretty sure it has enough power to turn it...

I wanted to trade it in & get a B25 but they will only give me 7K & it only has 240+ hours. So im thinking about getting a woods BH6000 which I think comes w/ a sub frame & pto pump?? Im just not...

I was working the tractor pretty good trying to dig up a stump and roots. Hit bypass ALOT. I backed up and noticed fluid on the ground. When running...fluid drips from around coupling. When using...

I'm going to look at a Kubota BX2660 with FEL and 60"MMM. It has 100+/- hours and has been stored inside. The 50 hour service has been done. Would $11,500 be a fair price for it?

I found a deal on a L2052 snowblower locally. It was on an L series, so it would have the larger quick hitch. It looks like I could get it cheap enough to make it worth ordering the female side of...

I found this piece of metal on my driveway today after driving over it with my BX. Is it from my Kubota? Thanks for the help. Further inspection, one end is clearly broken. Plus there is NO dirt...

Don't know for sure, I bought this tractor with 189 hours. Changed the hydro fluid with SUDT yesterday. Replaced filter and cleaned screen...which was pretty nasty. Think there's anything to be...

Hi! do not know where to put my question! I want to buy a kubota BX 2660 or 2670, what is the difference??

I'm having trouble with a Kubota BX2660 3-point hitch removal. Anyone have a good description of how to remove?

I can get a brand new LMC single roller pulverizer for $519. Just curious if my tractor will adequately pull this size? I have R4's and the rear's are loaded (although theyre small) Thanks

I'm wondering if anyone had any ideas for putting a storage box somewhere on this tractor? As y'all know, it's a small tractor...but would like a place for gloves, maybe a chain, etc. Thanks

Thinking about selling the MMM from my BX2660. It's a 60" in great condition. Any idea of worth? Thanks

FINALLY got a tractor today. It's a 2010 BX2660 with 185 hours. Bought it from a hardware store. They had just installed a new loader (but it's an Ansung B2405) and a 60" MMM. Immediate plans...

I have a bx2660 that is not used much in the summer but gets a decent workout in the winter running a snowblower. I am looking at going to a synthetic and had my car mechanic recommend amsoil 5w...

Due to a job move, I'll be selling my BX2660 that has approximately 60 hours of use. It has the 243 FEL and 60 inch deck along with the following BXpanded add-ons: - Quick-On Receiver Hitch -...

I have a 2008 BX2660 that I have bought various implements for thru the years, (se my signature) but now with my 1994 Husky lawn tractor on its last legs I am considering buying a mid mount mower...

So I want to extend the bucket on my FEl on my BX2660 (4 ft bucket) I find in the winter moving snow the bucket could handle more that now falls off the sides and back , also in the summer for...

Good afternoon all. I am in some severe need of assistance. I have a 2008 BX 2660 that I bought new in 2009. It has an FEL and a 60MMM. The tractor is used 95% for mowing about 5 acres. The...

Anyone have experience using a ratchet rake on a BX? I'm looking to clear out an acre of 3/4" saplings for food plots.

Don't ask how, but we own both of these Kubota models. We need to do the following chores: 1. Mow the lawn (using the BX2660 for this) 2. Drag a 70x110 indoor equine arena (have a 5.5', 400lb...

As it says. Sitting on my BX, I'm about 6" over the top of the ROPS. I'm going to put a canopy on this summer and integrate a self made can before winter. I would like a higher ROPS. Anyone...

i have a kubota bx 2660 4 wheel drive.... the front wheels stop pulling when under a load... when i first start out it works then it just stops and the back wheels start spinning... any...

Ideas for snow plow for either Kabota BX2660 or Kabota RTV500

I just spent three hours removing snow and breaking up ice on our looong, hilly gravel driveway. Then I ran a load of garbage to the end of the road with the BX2660, pushed in the parking brake...

I'm most likely moving somewhere where my yard will be much too small for a tractor. 2 questions: * What is the best avenue for selling 1.5 year old Kubota BX2660 with 54 hours? I'll post locally...

Help, am i missing something obvious? My bx2660 constantly gels even at relatively mild temps, its 25F today and the thing is gelled solid. I mix my anti gel additive into my fuel, Ive tried...

Hello, My FEL raise/lower stopped working. Curl function seems fine. The FEL control is sloppy as if there is something not connected. AND shortly thereafter there is no tractor Forward or Reverse...

In April (4 months ago) I began the process of killing about 3.5 acres of field grass. The area had crop rows (2 to 5" deep) that made it unbearable to mow in any direction other than parallel...

I am having a fuel delivery problem with the BX2660. It runs out of fuel and when I disconnect the hose from the rear filter very little fuel flows from the hose. When I blow air back through the...

I was mowing the grass today and the mower engagement lever would not "spring back" automatically when I disengaged the mower. I took an air hose and tried blowing out around the lever under the...

I'm looking at these two machines. I think I could do a little better on the new BX2360 pricing, but the used BX2660 is value priced based on all of the other similar machines I've priced, mainly...

I am considering selling my BX2660 for financial reasons and would like to know where can find the best average price to sell it for. I have been looking around, and find no BX's used, except an...

Just made my last payment on the BX2660 Been a good little unit,will enjoy it even more now that's it's payed for

I've searched and can't easily find. Need a post hole digger for my bx and have been told by some that any size will work, but most say I need a smaller one because the bx can't lift high enough...

This BX2660 came home new a month ago. Last week a seal failed at 18 hours and all the hydraulic fluid ended up in my driveway - I spent 4 hours last Monday at the dealer waiting to get that...

All, I have a 2011 kubota bx2660 with hydrostatic transmission with 145hrs. I have just bought this used. I have noticed when I release either the forward pedal or reverse pedal the tractor...

Been on fence and worrying to death about buying a used 2011 BX2660 with only 125 hours. With loader and belly mower. Excellant condition. The price is $12,400. From what I have found this is...

Will my bx2660 work we'll with a woods rcc42" rotary cutter? Thanks all.

BX2660 came with the home I just bought. They didn't leave manual. Question: rear deck won't go down- mowed with it this morning no problem. Tractor in 'n'- set throttle..-handle set on picture...

I am a first time buyer of a compact tractor, not sure which one to buy. I'm going to use it for mowing, removing snow and woodfire. Please HELP.

After the lift kit for the sweeper is attached to the front of the tractor, is it possible to reinstall the front end loader or does the lift kit have to be removed to put the loader back on the...

Anyone running chains on all 4 wheels on a BX2660 with AG tires? This is my first real snow with my BX and Sno-Pro plow and I'm having a heck of a time getting traction. I can hardly make it...

I recently added Rim Guard to my BX2660 and thought I would share the information for anyone else who may find it interesting or useful. Rim Guard dealers in Southwest Virginia is hard to find...

Morning Folks, I went to remount the MMM on my BX2660 yesterday and the mower lift arms are stuck in the up position. I take the MMM on and off quit a bit but I can't figure out this problem. I...

I picked up a new-never used V4290 snow blade at aution and cannot find any information on how to attach it to my BX2660; any suggestions?

Hi, After 350Hrs I've got my first problem with the BX.:confused: Today when working on the field (with a 3pt sprayer PTO driven) I had a sudden drop in RPM. It happend about 10 times during the...

Hello all, I need help!!! First off, my bx2660 has been nothing but problems. I have lost count at the number of fuel filters I have replaced just to keep it running, have taken tank off and...

Just purchased my 6th Kubota yesterday. This one will pull double duty as a lawn mower, and a barn tool. Ended up with a BX2660, FEL, 60" MMM, and I added a few implements that I've been...

I checked the manuals for both my BX2660 and Woods rotary cutter for the best ENGINE RPM setting for hogging but both manuals suggest checking "the other guy's" recommendation. I know the rear...

Hi, I just want to share some modifications I made to my BX2660 I wanted to add on some front weights without drastically modifying the front guard. just look at the pictures. I use the quick...

Main Features/Uses: - Must be dead simple to use (I have an M7040 and its too complicated for most of my staff - long story, not really relevant to this topic). - Under $14,000 - Ability to tow...

Hello everyone, New to the forum and looking to get my first tractor soon. Residential use in Ohio, 2 acres to mow, 3 acres to keep clear, 250' driveway, and creek to keep clean. Lots of hills...

How much rear ballast do you carry on your BX series machines? I just bought my first ever SCUT, its a BX2660 with 60" MMM, and FEL. Right now with no rear ballast using the FEL is down right...

If any BX owner has any tricks to share regarding removing their fuel tank please let me know. I think I have dirt or crud in my tank which is causing my machine to bog down as if it is fuel...

Just purchased a new BX2660, Front Loader, 50" Snowthrower w/hydraulic rotation, heated Curtis Cab, Rim Guard. Delivered incl/6% taxes for $20,600. This is my first tractor, hope I didn't get...

Guys - my 2010 BX2660 sprung a leak last year about 2 months from new. It was the hardline just above the rear PTO shroud. Dealer replaced no problem. That was July 2011. The same hardline has...

I've been a proud owner of a BX2660 for a couple of years now and have used it to mow (54" underbelly) a couple of acres and snow blow a 100' driveway and large yard. Last payment is next month...

Need some help here. Was moving mulch with my bucket today and after moving 4 yards my tractor starting shaking and lost power. I was able to restart and move some more mulch - even engaged the...

I just recieved my new MMM 54" for my BX2660. When I try to install it the bracket at the front doesn't line up. Sure, I can force it in position, but then it only holds the deck on one site. I've...

Here is my question, if your running a Wallenstein 42 PTO chipper, will you feel any difference in the chipping capability between the two tractors, I am aware that the HP PTO rating is higher on...

Has anyone done this? I can only afford a BX2360 but would like the BX2660 seat with recline feature! :thumbsup: Any feedback? Thanks! :D

Can I change my tranny filter and clean the screen without making a mess? I've got 50 hours on it so I don't want to change the fluid yet. Thanks for any help!

Hi, I just want to check if this is normal, my 3PH drops about 2"/hour when a load of 350lb is lifted. The tractor is bought with 35 hours on it (2011 model) My 30 years old Iseki doesn't...

At the begging of last summer when I was taking the blades off to sharpen them I let the deck slip as I was turning it back over. This means the deck came down on the gear box. At the time, I...

Found these suitcase weights on CL They're about an hour away so if they won't fit my BX2660, please let me know and save me a trip. :thumbsup: Also, is a buck a pound a good price for these...

I'm coming up on 50 hours and will peform the oil change myself. I ran Shell Rotella T6 synthetic 5W-40 in my Jeep Liberty Diesel. Any issues with running it in the Kubotee?

I stopped by my daughters horse farm today. She said her BX seemed to be moving slow. I tried it and agreed, especially in reverse. It has 350 hours. Any ideas?

Ok guys. I just picked up 30 acres of very hilly land just south of Rusk Texas. About 15 acres are woods and the other 15 has trees but needs to be mowed. Some of it I will finish mow, the rest...

I'm thinking about installing a 3rd function on my FEL. I've seen several posts about it, but has anyone actually installed one on a BX? Some pictures might be helpfull, especially from the valve...

Hello, first time posting on TBN. I'm hoping to tap your vast knowledge and experience. I'm currently looking at buying either a Deere 1026R or a BX2660 with comparable implements: - Loader...

Hi, just recieved my 2nd hand bx2660 with only 28hours on the clock! I have 2 small problems with it, perhaps someone can point me in the right direction.. First the 3ph doen't lower enough for...

Ok, today I decided to change the oil on my BX2660. I also have a block heater that I was going to install (getting ready for winter). When I took off the cowling, I noticed that there is an oil...

Can the pto on this toy pull in both directions? I don't see it anywhere in the manual, leading me to think it doesn't have the gear... Thanks.

has anyone ever fabbed a skid plate for a bx2660 for when the mmm is removed to protect the under carriage from debri while cleaning up wooded area. i have an idea but want to see if anyone else...

I have a Gearmore 50Gal 3pt PTO sprayer for spraying Fungicides and insecticides, but don't want to use it for herbicides to avoid cross contamination in a 200' hose. Question is what tool to use...

i have a new 2660 les than two hrs on it. used the tractor went to shut it off and it wont kill. I have checked all fuses they are ok. Also when there is no operator in the seat you can still...

New to this site so hopefully I am posting this correctly. I am trying to decide on which Kubota tractor to buy. I have very little tractor experience. I have a cabin in the mountains on a 1...

Has anybody added a fuse and circuit to the BX fuse block? It looks like it has space, and I wonder if there is a kit or instructions. I am adding some work lights and would like to make it...

Looked at a 2008 Bx2660 it had 54 hours. No warranty because of age. A 60" mmm, the asking price is $9,995. The fifty hour service had not been done. What do y'all think?

with a new LA243 FEL. Feeling kind of excited, a bit like Christmas morning. Planning to put in about 150 foot gravel drive extension, and the FEL will get the chore of spreading the road...

Hi, Wondering if anybody has an answer on how to fix this. My bx2660 stalls when i try to drive it with downpressure on the FEL. I can put the brake on and push the bucket down all day and lift...

I am doing my 400 hr service on my BX2660 tonight and picking up filters at dealer on the way home from work, I have one gallon of Kubota SUDT leftover from a couple years ago, but I forgot to...

Hey folks, I'm new to the forums...Looking to purchase my first tractor to help me manage 13 acres in NC. I've done a lot of reading on the forums (thanks!) and have concluded that a BX-series...

I would like to take the upper and lower links off when I mow, and when I pull a wagon with the BX2660. The upper link comes off easy as pie. Is there any way to take the lower links off...

Well, I did it. Pulled the trigger on the BX2660. Couldn't get past the "0%" and the fact I will have this for another 10 - 15 years, so I went new. Went with R4's, 60" mmm, FEL, and plow. This...

So, I am doing the 50 hour service and I pull the front axle fill plug/dip stick to check the oil. Dry as a bone. WTF! I shine a light in the hole and the axle shaft dry. There is a small...

I'm looking to pick up a rotary cutter sometime in the next week or 2. I have a WTB listing on CL, but nothing comes up I'll buy new. The Kubota stealership sells Land Pride which seems to be...

I'm feeling a little tipsy (and not in a good way). These side hills are scary. Glad I didn't go with a B Model! Can anyone make a recommendation for spacers on the rear wheels on my new...

I have seen on some forums the statement of the bx26' You will run out of traction before you run out of power'. I use my bx2660 (Turf tires) to move around my 20ft cape island fisher (on a 4...

I'm trying to lock out my 3ph moving up and down following my manual which states to turn the 3 point knob clockwise to lock it. When I do this my 3ph still moves up and down but my mower deck...

The 2660 has been excellent for my needs. That said, it would appear that I made a bit of a mistake in thinking that a BH would be a "not all the time" requirement. Now, as I look at the projects...

We have had issues with the lights on our BX2660 ever since the cab went on. The cab kit relocated them to outside the fender, right where they get hit when you get close to the fence to mow. The...

Hi guys, was looking for a little advice. My tractor has been in the shop the last 3 weeks for a transmission leak. I got it back and all is well. I go there so much I have become somewhat friends...

Hello, As the title says... which is better for mowing a home yard... a BX or the B? I would be using it with a belly mower from Kubota. I like the fact the B machine is larger, etc. But I'm...

I've been wondering how much mower my 2660 can handle. I know it runs my 60" belly mower in tall grass without so much as a hiccup. I'm growing tired of raking my lights off on the bushes and...

It seems I've got a lot of work on both my daughters place and mine. Any experience with chippers? Recommendations on brand? Approx what $ do these run?

I've searched for hours but can't find anything about the red button that is behind the 3 point top link mounting. Sorry, no camera. What's it do? I'm afraid to push it without knowing.:confused2:

I just received the Heavy Hitch and Installed the John deere painted orange suitcase weights on my BX2660 .

I've read the archives on the 50-hour service, one area is unclear... When I remove the transmission strainer assembly for cleaning, will all the transmission fluid drain out? Since the manual...

Alright, so we have decided to befriend our trusty GL3130 with a BX2660. BX2660 60" MMM FEL Brush guard R4 Filled tires We've gotten 2 prices so far, and Im going to call the only other local...

I'm thinking about making a financial move, which includes selling my BX2660. It has about 330 hours on it, looks and drives new, includes FEL, MMM, and both turf tires and R4's. It seems in N...

Does anyone know how to completely remove the lower links on a BX2660? Specifically I'm trying to understand what I have to do to get the "pin lower link", item 010 in the attached PDF, out. I'm...

Hi guys, just wondering if any of you could summarize the differences between the 2008 and 2011 models of the BX2660. I've searched the net for info, but haven't been able to find anything...

Hi guys - at about 20hrs my FEL and 3pt hydraulics started to whine loudly when raised, lowered, or curled. The same noise was present when reaching the end of piston travel and hitting the bypass...

I just moved from OK to TN and am currently building a new house on 5 acres. Going to this size of a "yard", I just bought my first tractor, a used BX2660 with a FEL and 60 MMM. It has 120 hours...

Everyone was so helpful with my couple of what should I buy questions that I thought I would share what I finally ended up with. BX2660, FEL, 60" MMM and BB. My local dealer was able to get my...

New member here with a little problem...I recently purchased a new Kubota bx2660 April 8th, 2011 with 60"mmm, FEL and box blade. I've mowed a total of 3 times and after inspecting radiator screen...

Been noticing small drops here and there. I looked under it briefly and it looks like its coming from the Mid pto that hooks to the mower. Going to look closer today and take the mower off and...

I guess I am littering this place with threads, but ya'll asked for pictures, so here they are. BX2660, 54" fine MMM deck, Land Pride BB0548 box blade. About 2.4 hours on the meter at the time...

The two Land Pride choices are the BB0548 and the BB1548. They are both 48" and both have 4 scarifiers, the basic differences are: BB0548 - 12" side boards; 277 pounds. BB1548 - 17" side boards...

My first post here too ;-) I have 6.5 acre (1.5/5 yard/pasture) and was using a Troybilt 46" and a Yanmar YM2000 (24hp diesel). I have a 48" blade, a 60" chain harrow, a 48" Howse rotary mower...

Hello, I was wandering if anyone has put a better seat in their BX2660? I am looking at one from Princess Auto...

I know this one has been done, but here is one more. I'm super happy with the heavy duty construction of this unit, and Jeff is great to work with. Mark the location for the bucket brackets. Use...

Will a 2660 pull a 14" single bottom plow or would a 12 be a better match? Ian

I've not looked. Is it integrated into the transmission? I assume it is. Ian

I want to get a berlon tooth bar for my bx2660 my bucket is 46 3/8 wide but how thick is the metal on bottom of bucket

These are the upgrades or customiza I have done to my BX. You might of seen some of them before, but I thought I would put them into one post. #1 is the bracket for useing chains and a small boom...

I have a chance to pick up a 2009 Bx 2660 with 65 hrs. It has a new 2011 loader on it, no mower deck, looks really nice. I can get it for 10,250. Any thoughts guys?

I was fairly certain that PTOs were standard all around, but now I'm not certain. I tried for hours to get my new Lorenz 430 snowblower's PTO shaft attached to the BX, but it just won't snap in...

This is the step I made today for the old woman. It is removable by removing one bolt and it slides in and out. Right now it's all the way out. I wanted it smaller and she wanted it wide, I lost...

Today I was pushing snow and everything was working fine. I took a brake and always park the tractor in a heated garage. I went to start the tractor and knowticed that when I turned the key to...

Hey guys (-n-gals), I'm researching the BX2660. I plan on using it for mowing ~2 hilly acres and using the FEL for general yard maintenance like moving mulch, dirt and moving firewood from...

I have a BX2200 with the loader ,60 inch deck and snow blade BX 2763 since new in 2001 with 418 hrs and it has been a wonderful little tractor and never been in the shop for repair.I'am...

Hello everybody, I'm new to this forum but have already read lots of the good advice and information shared here. Over the past 3 months or so I've been thinking about purchasing a Kubota for...

Just purchased a new BX2660. Kubota's brochure on the BX series tractors describes the 1/4 inching value function for the 3-pt along with a picture of the control lever. To me, the picture...

Did a couple more things to my BX2660 to fit my needs a little better. It came with a lawn mower trailer hitch, so I made a draw bar like the big boys have. Also I didn't like unhatching...

Hi All, Have been a Kubota fan for many years and owned a B1500E, G1800, BX2200 and loved them all. Now, will be in the market for a BX25 early next year. Even have my wife's OK!!! (Glory!) Got...

While running the rotary cutter today, I noticed the throttle lever felt loose compared to the way it normally feels. I also noticed the RPM's start to slowly creep down. Needless to say, it got...

Hello I am just doing some maintenance on my BX2660 before the snow comes and am wandering if any other owners knows where all the grease zerks are located on this tractor. The manual only says...

Just got these done today. I also redone the left lift arm, It wasn't made just right. In the next to last picture you can see my buddy, she is always right next to me. The last picture is me and her.

When I was mowing this past weekend (full throttle), I noticed the tractor start to lower the RPM's by itself, cough a little and then back to full rev's. I dismissed it. A few minutes later, it...

I'm upgrading to either a BX2660 (probable) or a B2620(possible). Final pricing will carry some weight - utility/versatility will, however, guide my hand. Grass cutting around the house has...

To All: I will be getting a brand new 2010 Kubota bx 2660 on Saturday. The 3pt hitch is a cat 1 but it seems narrow and with a short distance for the top connector arm. Do you need a special size...

Just did my 50 hr. engine oil and filter change, the manual says it will take 3.7 qts. of oil with a filter change, thats what I put in the engine, but on the oil dipstick it shows that its low...

Just got a BX2660 and when driving I could fell and hear a popping coming from the front axle. I raised the front end off the ground and could not move the wheels up or down. I took the pivot bolt...

Any body know what size socket it takes to take the blades off my BX2660 THANKS

I was curious what your thoughts are on this video YouTube: BX2660 MMM Vibration at 2200-2900 Engine RPM Am I paranoid or do you think this is a real problem?

I had an opportunity a while ago to pick up a GB60 box blade and it was suggested to me that it was too big based on how much material the box itself would hold. Was told I'd likely be spinning...

I was going to put my questions into the attachments forum but because I wanted it to be specific to my model I thought I might get more responses from this one. I'd welcome opinions from all and...

OK, Game on, this is my first thread that I started, I think. I usually only post if I can add positive information on other posts. Now I need help, My BX2660 is now taking longer to engage the...

How far does your 3pt drop down? Mine well drop until the arm are level. Is that right?? Sure doesn't seem right, I would think they should go close to the ground.

Well, finally got it today and it is a fine machine. Did my first lawn cut with the 60" deck, it really gives a very nice cut and I am impressed. Still not sure about throwing the grass and might...

I have looked at a BX2660 with loaded R4 tires, loader,60" MMM, and 1 set of rear remote hyd. The help is on price. I'm getting as much as $2100.00 differents from dealers 60 miles apart. I'm...

How can you tell when my BX2660 was manufactured? BTW I love this thing.

I would like to say Hello on my first post and that I have been lurking here for quite some time. Finally bought a BX25 today (sorry no pictures). I am of a short stature and would love to put...

I have an issue with a new PHD I purchased from TSC. It is the CountyLine Model 100 (Speedco?). It is currently on sale. :) The issue is that there does not appear to be enough clearance on the...

Looks like the 1 year old BX2660 MMM FEL with a bit over 60 hours (50 hour service recently completed) is going to be hunting a new home in a couple of weeks. I'll mow with it until my F3080 4wd...

I have an opportunity to pick up a nice used Woods Box Blade model GB60 and was wondering if there were any BX2660 owners that might be using something this heavy? I contacted Woods and they...

Our resident X700 basher got me thinking about how they actually compare to the sub-CUTs. And while I was sitting here waiting for the laundry to finish drying I had the time to look it all up...

Just bought a BX2660 with a MMM and box blade. I am now consiidering the Landpride RBT1560 Rear Blade as my next addition. It will be used in SW Florida so snow is not a consideration. It will...

Just received my new BX2660. Looks and sounds great! I have a new owner question. I noticed that there is a small gray plastic cap in the center of the fuel filler cap. I am assuming this cap...

I think I could have lifted that little BX up and turned it upside down by myself today I was so mad!!:mad: I have 2 hours on it, and a stick the size of my thumb finds its way up and beside that...

Moved more dirt from my top soil reserve pile up to my garden, Drug boxblade most of the time to smooth out my "road" down to my pile of dirt and back up to the garden. Finished my dirt...

Here in Missouri I am getting quoted bx2660, turf tires, 60: fine cut deck: $12,500 FEL: $2,400 I have the green light from the mrs to get it but would feel better if others could tell me it is a...

has anybody used a full size phd like you would get at tsc? Looking at the 2660 but want to make sure it will work with some of my existing implements with the phd being one of...

I am shopping for a box scraper for my BX2660 and a local dealer is offering me a 48" and 54" landpride for about the same price. It is a BB1554 which weighs 402lbs that I am considering. Thanks!

Hello, I am new to this site, but have enjoyed reading the various posts. I recently received a quote for a new BX2660. *BX2660 Tractor *LA243 Loader & Bucket *60" MMM *4 foot box...

Did my 50 hour service on my BX2660 this week. I removed the MMM during the 50 hour service. I took pictures of most of the steps. I see where some people claim to be able to remove and replace...

I have a Kubota BX2660 and I am looing for a Box Blade. Anyone have any suggestions to what size and kind to get for this size tractor? The width of the rear tires is approximately 44". Thanks!

Tilled my brothers garden and moved some dirt and then tilled my neighbors garden and then moved some more dirt and then got the new BX25 out and took some side beside pictures. Noticed the BX25...

Hi Everyone, The quotes for a new BX2660 with a front end loader are starting to come in. Here is what I have so far. One dealer asked not to be recognized, so I won't mention any of them...

I have been reading this forum for awhile now and my father-in-law is in the market for a new tractor. Yesterday we started out for the Kubota dealer and found they were closed on Mondays so we...

Just wanted to share some pictures of the work lamps I've installed on the orange beast. They came out great! 6000 unadulterated lumens blasting out into the darkness... I used a modified Osram...

I know there was some question on a recent post as to which was saving which. A BX pulling out a Dodge truck or the Dodge truck pulling out the BX?:D Well today when I came home I couldn't get my...

Hello all, Just got a Woods BH to fit on my BX2660 and can not figure out how to remove lower arms of 3ph. I know this is going to be a silly question for all those experienced tractor owners...

I live on a hill in Ky. Not much snow. No snow plow or front/rear blade. Snowed 2 or 3 inches and slid all the way down the hill in my WRX Subaru Wed and almost never made it back up. Should have...

I was considering getting the hydraulic top link that CC Machinery offers for the BX series, but noticed it only has 4" of stroke, going from 14" to 18": Tractor Hydraulic toplinks, Top-N-Tilt...

First time for me installing chains on the rear wheels. Bought a pair from tirechains.com. I laid the chains out carefully on the garage floor behind the Bota and then rolled it backwards to the...

I see Kubota offers a 51" two stage rear mount snowblower with an optional hyd chute rotator. I would prefer a front mount blower but I like the idea of having both the FEL and blower. How is the...

I see Kubota offers a 51" two stage rear mount snowblower with an optional hyd chute rotator. I would like a front mount blower but I like the idea of having the FEL and blower. How is the hyd...

Posted this on the Cub page also. Looking for some knowledgable folks to lend some advice. Have been looking at both of these machines and think I'm leaning toward the Cub/Yanmar right now, but...

Looking for some knowledgable folks to lend some advice. Have been looking at both of these machines and think I'm leaning toward the Cub/Yanmar right now, but have never owned a tractor myself...

I'm happy to have found this site. I'm a newbe to the sub-compact tractor world. Had a Honda H4518 lawn tractor and its time to move up. I've looked at the Massey Ferguson GC 2400 & 2600 and the...

I just bought a BX2660 on Tuesday and decided to hook up my 48" box blade today (Worksaver SBX-4)... It was a pain to get on, mostly because I had to lift the box blade up to get it into the...

Well I had a change of heart and am getting the Kubota BX2660 with Loader. It was a tough choice between it and the MF GC2400. Getting a Package deal with the Tractor, Loader, Cutter, Disk , and...

After putting about 18 hours on my new tractor, im really starting to see how much of a jack of all trades tool it is! We just moved into a new house and has made the move easy. Clearing and...

My FEL came in so the dealer came by and picked up my BX to install it and is going to bring it back Friday. In the mean while I am trying to think of a good way to counter balance the FEL load. I...

Well, I finally started doing some work with the FEL on my new BX2660. I didn't think I was being too rough with it, but apparently I was. Somehow the right pin came out (the one that you remove...

I just picked a new front mount blower with quick hitch for my bx2660. The hydraulic cylinder comes empty. Should I fill it as much as I can before install, or should I cycle it through and fill...

Does anyone know what the going price is for a new Kubota BX2660 w/loader only (in the NewEngland Area). I recieved a price of 12,800 from a local dealer whichs seems fair. Also if someone has...

Does anyone know what the going price is for a new Kubota BX2660 w/loader only (in the NewEngland Area). Also a BX25 if anyone has the info. :)

Just curious if other BX owners have a similar experience as I. I put a strait edge on my left and right front frame rails (inside of front wheels) to see how strait it was. Needless to say, it...

Hello all. Ive been lurking here for a while, trying to soak up some Kubota information. I am getting a BX2660 with FEL and 60"MMM this weekend (i hope). I had a few questions that I wanted to ask...

I made every attempt to buy local and really wanted to do so because of the economic conditions, but no one should be faulted for buying the same tractor for thousands less out of state. A...

See this thread below. Pictured is HST fan protection for the BX1860. My new 2009 BX2660 that arrived today had the same guard in place. :)...

My new tractor arrived in the crate today :) at the dealership and I signed the papers. Should be delivered Friday. :D Thanks to all the members who gave advice and suggestions. I couldn't...

i have a bx2660 with a 4 ft bushhog squealer when i mow my 4 acres with it it will leave a 1 ft or so strip of grass on one side has anyone had trouble of this kind any help would be greatful

Put my FEL back on my BX2660 and it's squealing when bucket reaches maximum extension right and left with control lever?:confused: If you know why, please respond.

I might be picking up a BX2660 soon with FEL and MMM and wondering what the weight of the FEL is. I cannot find it in any Kubota literature I have. I'm aware that the tractor weighs approx 1389...

Hello everyone. I am a new member and have viewed this site alot before making my purchase of a BX 2660. I love the tractor. Today, I was pulling my box blade and the tractor RPMs dropped to...

Stopped by Barlows a couple of days ago and picked up a sunshade for my BX2660. Installed it today. About to much for me and my wife to do. She's to short.:) Would have been easier for two average...

I've always hated the drive for awhile and then find out I didn't release the parking brake on my Kubota that I owned at the time. Mowed today with my BX2660. My BX1500 parking brake would let me...

Well I think I've pretty much convinced myself that I'm going to either go with the BX2660 or the B2320. Help me decide. Here's my situation. My wife and I purchased about 8 acres of what was...

Hello all, Quick question on the BX2660 instrument cluster. After running and parking my new BX in the garage I shut her down, but the temp gage stays frozen in the warmed up range with the...

So, perhaps I'm missing something, but I seem to be having a hard time getting my PTO to switch between mid, rear, and mid/rear split. I get it into one (like Rear when I'm using just my bush...

Hello, Thank's for all your input on my previous thread. Our new BX2660 was delivered on Thursday afternoon and in terms of the quality of the design and build I couldn't be more pleased. This...

Hello all, I've been reading up for weeks now, and my brand new BX2660 arrived today. I have a couple of new guy questions that I'm sure somebody will have an answer/opinion on so here's my...

Written specs and info sheets only go so far. Here are side by side pictures. B3200 60" Light metal:) bucket. BX2660 60" MMM. These are both great machines. They are just different. Here's hoping...

Hello all, I'm a 2000 series cub cadet owner on the fence to upgrade. I'm looking at a BX2660 with FEL, 60" MMM, Turf Tires, and Snow Blower attachment. Two questions, 1) Do I pull the trigger...

My problem with the abrupt stop in the BX2350 has been fixed. It's gone. In it's place is a BX2660.

Well I look to have made a decent (better priced then I found through many online dealers mentioned here) deal on a BX2660 here in Ohio! Of course as with most of these that are priced super...

I noticed when I took off my MMM this weekend, the difference in the threads on the adjustment of the front link (the link that is "levered" up between the front wheels) was about 1/2" between...

Im not sure if anyone else has done this. I always seem to have trouble attaching the tiller up to my tractor. I tried something that works well for me, no cussing or bloody knuckles. I hooked...

BX2660 Idle Speed?? My recently delivered BX2660 has an idle speed of 1450 RPM which seems a bit fast when I turn the key off. The dealer told me that Kubota does not specify a min/max idle...

I have the shop manual for my B7510 sitting here. It's been handy, but now that the tractor is gone, I'm thinking about selling it to a happy B7510 owner. Then I got to thinking... the manual...

The dealer delivered my BX2660 equipped with a 60 MMM and sun canopy today. After cutting my 3 acres in about the same time as I used to do it with my L3430 and a 6 RMM I am ecstatic about my...

Has anybody installed a front hitch on their BX? I see a front-mount 2" receiver for the BX on eBay, and thought it would be helpful in moving my landscape trailer into the barn (minimal tongue...

In my search to decide if I wanted a BX, I came across a dealer that said an additional set of tires and rims (industrial tread) would cost only $300. I think that is outrageous! Outrageously...

Simple as that. Or is it a major headache?

Kubotabooks.com does not have these, and nowhere else I could find. Has anybody found "downloadable" .pdf book files of these anywhere else? I hate to pay $65 a piece, but I guess I was spoiled...

Hi, I have a bx2660 can anyone tell me how far up the 3pt arms should go? Mine dont look like they go all the way up. Is there an adjustment? thanks

Most of my research and testing came last year, but due to financial issues and the economy I decided to hold off. Well after our riding mower broke down a few weeks ago I felt it was time to...

Hi all! Just wondering if anybody has fit a Woods BH6000 to a BX2660 yet? I am thinking of doing this and would appreciate any advise/comments on this combination. Dave

I'm trying to decide between the BX2660 and the BX2360. I read where someone had trouble with the air filter clamp....like with our current BX2200 I also read where someone had a hydrolic...

Posted this in another forum...this one might be better: We have a Bx2200 from 2001 and we use it with a FEL, 60" mower and rear blower. We have worked this tractor quite hard and it has...

We have a Bx2200 from 2001 and we use it with a FEL, 60" mower and rear blower. We have worked this tractor quite hard and it has developed a few leaks in the front. Thinking of trading it for a...

I thought I saw a post on this a while back but found nothing using search. Doing a masive amout of loader work and my Bx2660 seems to be a lot slower in reverse today. Has about 45 hours on the...

I monitored the forum for months pondering a new tractor. Needing the FEL and a tiller, I contemplated the 60" MMM. Brand new tractor FEL and MMM was $13,150 with 0.5 hrs, just in case anybody...

I have searched this forum for removing the FEL from a BX. I cannot find my problem, sorry if it is posted somewhere. Following the directions in the manual, I cannot get the FEL to lift out of...

BX2660 Deluxe Reclining Seat Anyone have any experience modifying or adjusting the engine kill seat safety switch on this model seat? I would like to have the weight switch to be not so sensitive...

Thinking of putting a rear work light on my BX2660 tractor. I checked out my tractor today and there is a wire tap made for a work light. The wire tap is on its own dedicated 20 amp fuse in the...

Last night I was backing my tractor up a slight incline with about 6" of snow and tractor stalled a few times. One time it would not engage the starter, I waited a few minutes and it startred up...

Finaly, I receive my new Kubota BX2660 after 3 months of waiting. The snowblower was BO and the hydro too. Now I'm waiting for 10-12 inch of snow. If you guys want more pic just ask. Curtis...

So I've been playing with my 2660, and while I'm completely happy with it's performance, I find myself looking quite longingly at those BX2x's, with their fancy backhoes. It seems every time I...

It's amazing how much has come full circle between these machines- metal hood and fenders oil, air, fuel and hydro filters match almost exactly the same length with FEL Gotta love what they have...

How can I tell if 4WD is active? With the lever forward into 4WD, the rear wheels spun while the rear blade was lowered too far and digging deep into the soil. It appeared as if the front wheels...

ok well I want to purchase a new tractor I first tested a CaseIH DX31 then didnt think i needed one that big so i tested a cub cadet sc2400 that seems to be a nice little tractor then i drove my...

I can't decide. I only have 1.5 acres to mow, 1/4 mile gravel driveway to maintain, a little bit of snow in central Virginia. Also 5+ acres of woods to enter and fetch firewood. Also, a one-time...

Hi everyone, I'm a greeeeen user and I'm just wondering if I'm breaking in my engine correctly? The owners manual isn't that specific on operational rpm's. I'm looking around online for advice on...

Hi All, I'm new to the site, and have just purchased a new BX2660 (being delivered next week, they're hard to find in Canada, so had to be shipped to Nova Scotia from Quebec.) I've been reading...

BX2660 with FEL, 60" MMM - $15,200 with 0% for 42 months As a comparison, 2007 Iowa State Fair pricing for BX2350, FEL, 60" MMM - $13,500 with 0% for 36months So, you have to ask if 3hp, new...

Got a quote of $13,222 (not including tax) today on a BX2660 with 60" MMM, 48" bucket, and grill guard. Does that seem about right or is there room to move there. Location is Iowa. Thanks.

Pictures are attached. Going from memory, this is a 700-800 premium over the 2350. Your getting an extra 3 Hp (bigger block), all metal construction, 20% larger radiator, and a realy nice tilt...

I was picking up some maintenance stuff for my Legacy this morning at my Simplicity / Kubota / Polaris dealer, and got a chance to look over a BX2660 a little. There is a decal on the hood that...