Search results

I have a 763 Skidsteer and 1 side of the Bob Tach plate is out of round. I have a new bushing for it, usually that just sits in there and holds the pins that attach to the loader arms. My question is should I weld the new bushing in place to keep if from moving around? Any other ideas? I...

Purchased a 7TB backhoe for my CT225 tractor from a gentleman on TractorByNet. The backhoe was originally made by Rhino who has since discontinued bucket manufacturing. The backhoe came with an 18" bucket and I wanted a 12" and possibly a 24" bucket. I have been searching everywhere and...

I got a service manual for my 7TB backhoe from heydownloads.com - looks sketchy but I had no problem getting it. https://www.heydownloads.com/sample-page/?s=CT122&post_type=product&category=0

Can anyone recommend a source for a 12" bucket or 9" bucket for the Bobcat 7TB backhoe? It is a rebranded Rhino 75C that isn't made any longer. I believe the Bobcat number might be 7166939. I do have the specs for it but have come up empty in trying to find one or one even close. Thanks...

Alway loved that about TBN, no politics. Sadly seen to much over the last year.

I’m not stopping. Most times it would make and unfortunate accident escalate to something more. Good way to end up on the news and not in a a good way.

I have clamp on forks and quick attach. The clamp on ones never get used and the quick attached are my most used attachment.

Smart phones are not much different than Alexa or Google home

I second Harbor Freight, great cabinets for the money.

What he said

I leave my truck parked outside on the driveway and I want to move it off the driveway into a carport. I don't drive it everyday so it may sit 3, 4, 5 days at a time am I going to have a mice issue because it's in the woods a little bit I do plan on clearing a trees out of there and putting...

. Here it is[emoji16]

My CT225 right side curl cylinder is leaking. I have put it off for a year, but it seams to be getting worse. I tried on the Bobcat site to find a seal kit. If it is there they hide it pretty good. Any suggestions where to find a seal kit? How difficult is it to repair? I have the...

The attached word document is a log I use to keep track of all my maintenance. Feel free to use and modify. I store it on my Google Drive so I have access to it from anywhere. :thumbsup: Steve Will work for most types of equipment. (Open it and save it as a template)

Got a 2019 Ram 1500 and want to get some ramps so I can do some general maintenance and oil changes. Curious what ramps everyone is using?

Got the PJ Trailer came with the spare tire, removable back gate and removable sides I think it'll work great - thanks everybody for the ideas

I am in the process of buying a all aluminum utility trailer. I am looking at 6-7' by 12'. I have pretty much settled on a Aluma or a Legend. The Aluma has a all aluminum deck, rail/sides that are bout 6" tall and a bi-fold back ramp/gate. The legend has a full ramp at the back, a wood deck...

I had posted before about my desire to get a Kubota X1140. Wife finally got to see one and did not like the seating. So we looked at a 2019 Gator 825 S4, 4 seater and she loved it. Nice machine, obviously not the same work horse the Kubota would be, but that’s OK. We currently have a 4x2...

Hi Polaris Owners. Thought I would post this question to the forum. Currently have a 17 year old 4x2 Gator and am looking for something to use for working on my property and also giving the grandchildren a ride occasionally. After driving a few of them - I am down to a Polaris Crew...

The wife wanted a front porch put on the house - see before and after pictures. I was roofing the house anyways - made the job much easier. We had the roof for the porch framed in a day.

I also live on a dead end road - I have 30 acres and plow my driveway and also plow an elderly ladies driveway. To me it is worth it just to receive the nice thank you card she sends me each year. I use my John Deere Buck 650 ATV to plow with and one year she sends me a note saying how much...

I built one like this - works great

Any roofers want to chime in on what is the best way to re-roof my home. I will explain what is there currently. Photo below would be the inside (not my actual home).. When I bought our house the interior ceiling looked similar to the picture. We framed in the ceiling and dry walled it and...

I guess rusted bolts and faded paint is how they build them now - "Like New" Wood Chipper 3 Point

As the title states - will I see an improvement in traction with a new set of front tires - the back one are not nearly as worn Thanks

Just grab the little tag that is stapled to the end of each 6x6 - it will tell you what it is treated for - if it is confusing - just check it online with your phone.

Over the years I have subscribed to many different magazines. Usually one or two articles of interest and at times no articles of interest. Handyman, Wood Magazine, This Old House - clutter everywhere and eventually thrown away. Finally dawned on me about a week ago :shocked: - Dummy, you...

This is the way I split - works great:dance1:

I have a 2006 John Deere Buck 650ex that when pushing the starter button a relay just clicks. I checked voltage at the starter and when the relay clicks I have no voltage. Battery is good. Eventually the starter will fire. Is the starter relay bad? Any suggestions?

Got most of the Rotary Cutter done Sorry about the picture rotation

I would send you a pdf of this but it is to big :D

Starting to get the Brush Hog put together - tested it today - now on to paint

I have seen some brush hogs without this part and others with it. What is the purpose of it and should I use it? Thanks

Got my son to snap this as we where driving down the road:steeringwheel:

:thumbsup:

Thought I would start a thread on things we are all working on this winter - I am taking 2 brush hogs and making one. Frame from one, gear box from one, stump jumper from one

Any idea where I can get a bushing to thread into the tailwheel on this King Kutter brush hog? Thanks

Got working on this - cutting the bolts was a little sketch, they where under tension. I have 2 left to remove, those I have loosened up. Thanks to PILOON for the suggestion about the rails(see photos). I am trying to get this done next week. I think I have everything in order. Any other...

Got outside this morning and turned around to go back into the house to retrieve my morning Big Gulp of Diet Coke. Got all the way in the house and gave my wife a funny look:confused2: - she said what is wrong "I Told her I came back into the house to get my pop - it was in my left hand the...

Something like the above - star lock push on connector

I personalized my ballast box with some vinyl I had laying around.:cool2:

A little small, but it will work for me. My 3 point picked it up from the ground just fine.

Would like some suggestion on how to do this safely. We have a old truck the I am taking the box off of. We are going to drive the truck to my house and then cut the brackets that hold the box to the truck frame. We can not drive it in where it needs to go so I will need to turn the box...

Better get someone with steadier hands:laughing: The post was for implements not the saws.

Sorry if this has been covered in the past. I am amazed at the help so many people are willing to offer others - THANKS:thumbsup:. Here comes the BUT....... Many time I have read a post where someone is asking for help to fix or diagnosis a problem with their tractor or other type of...

Was out moving some old rotten wood with my loader - heard a noise that sounded like liquid looked on the left side of my tractor and saw anti-freeze coming out of the tractor. Turned off the tractor and a big stick had shoved off the lower anti-freeze hose - put it back on and refilled the...

Put this on my pole barn door - sorry not Bobcat colors - wanted to use up some old vinyl. :o

Got this at our local pumpkin farm - looks great - colors kinda match my CT225 :D

Got this idea from Handyman Magazine. You could substitute a 2" pipe for the lower half.

Found this Woods 5000 Chipper/Shredder on craigslist - paid $720.00 - think I did pretty good. Very happy with its performance. Anyone have a suggestion on where to get blades/Knifes? I believe they are 3 1/8" x 2" x 1/4" with a 45 degree bevel. Thanks

I have a Bobcat CT225 (Kioti CK27) tractor and I want to build a stump bucket for it. I have attached pictures of my mock up. All metal is 1/4" except for the front edge - it will be 1/2" Bottom is 8" x 36" Sides are 16" x 36" Angle of sides to back is 30 degrees I will have 2 each 8x8...

A little advice - I have a Bobcat CT225 (Kioti CK27) Tractor with a quick attach bucket. I want to get a set of pallet forks and I can get a Bradco set with 42" tines for 550$ plus tax. Just like these - Bradco Compact Tractor Loader Pallet Forks, Model Universal Skid Steer Quick Attach Do I...

Tow behind brush hog. Not sure of brand. $300 OBO. It never ends:D:D:D:D:D

Guess what - I can get this one for only $2,000.00 - should I post my bank account info here or email it to them???? I am at a lost:D:D:D:D

I have a CT225 with 1 pair of rear hydraulics on it. I have never used them and I looked at the owners manual and I still do not understand how they work. I would like to hook a 3 point wood splitter to them. I do not want to damage the tractor, so I need a basic understanding of how they...

Getting things finished up - test fitted and primed.

I am only subscribed to 2 threads but received a bunch of emails from the threads I had unsubscribed from??? Any one know what is going on? Thanks

First I would like to thank everyone who contributes on the TBN. I have learned many things since joining TBN just a few months ago. Second, I wanted to build a set of brush forks for my Bobcat CT225 tractor. Putting a few ideas together that I have seen on TBN I came up with the following...

Anyone have a user manual for a Bobcat CT225 in a PDF format??? Thanks

I am looking at a Bobcat CT225 with loader. They are asking $9,850.00 for it, has 415 hours on it, was used at a Bobcat dealership (rental and yard maintance). It has the hydro pedal that does not want to return to the center position. I read the thread on that problem. Did any one find a...

Been doing a lot of research - looking to buy a tractor in the next 6 months. I have narrowed my choices down to the following tractors - Branson 2400H, Kioti CK2510 or a JS XJ2025H. Going to be using the FEL and will probably add a 4' brush hog in the future. I'd love to hear from guys in...