kubota b3200

Well I finally am able to take a few pictures. the toy with the tiller attached. Monday the Backhoe gets attached by the dealer. Been working on gardens all day with the tiller. Blueberries, black currents and elderberries all planted today.

Just arrived yesterday. Can't wait for the weekend. Backhoe is a little tricky for a newbee. Any tips? By the way, The Man cave colors (Kubota Orange) was the wifes idea :licking: She's priceless.

Well.... after almost a year of pestering you guys on this site, asking opinions and reading everything there is to read I finally went to MBTractor in Plaistow this weekend and ordered my FIRST tractor :thumbsup: Spoiler alert : There are no pics yet as it's not turning up for a week or two...

My B3200 arrived today. Tractor, loader and tiller. The tiller is one tough piece of equipment, been working with it all day. Have 38 yards of dirt to put in gardens tomorrow then more tilling. I think I am going to be on the tractor as much as possible to play. I am impressed with Kubota. Will...

I searched the forums and didnt find anyone else having this issue so here's my question. After running my B3200 for the last week with no issues, yesterday the throttle lever started not staying in place when I throttle it up. I pull it to full throttle and when i release it the lever springs...

I have a question regarding my new Kubota B3200 with 24 hours on the clock. It starts kind of hard. I kept it in a heated garage all winter and fought this. It wasn't a cold problem. Even now at 45 degrees outside it skips and sputters when I start it for the first 30 seconds or so. I had a...

If you load the R-4 tires on a B3200 how much weight does it add please? I have used the search function to no avail. Thanks

I have a 2 year old B3200 with the LA504 FEL. There are almost 90 hours on the tractor and loader. The maintenance was done at 80 hours with all filters and fluids changed. The loader has worked fine since the 1st maintenance. The front bucket will lift off the ground and dump. But it wont curl...

LA524 and L3200 lift capacities brochure says 524 lift cap is any where between 855# and 1490# depending on where the load is in relation to the "pivot pin". I take it that the pivot pin is the pin on the loader end of the bucket hydraulic piston. So instead of "scooping" up alog and having...

Well after much looking and pricing, I decided on the B3200 with BH, FEL, and Tiller. Dealer ordered it 2 weeks ago and I am getting itchy to have the new toy. The L3200 was just to big for what I wanted to do and I am hoping the B3200 is a good pick as this is going to be my first Kubota. As...

Getting a B3200 Monday and can't decide if I need/want a 60 or 72 inch MMM? Cutting 5 acres and most is sloped and has terraces and is bumpy { read not very smooth} For cutting along the terraces do I need the 60" or 72" MMM? I am worried about the side digging in on the low side. I know many...

I have a 2010 B3200 HSD with 85 hours. Mid and rear pto. Loader valves no loader. Front brush guard r4 tires. I need a larger tractor and want to sell this one. Paid $13,500. All this to say anyone have an idea as to what it is worth. Thinking eleven k.:confused: Thanks for input.

I am looking at the B3200 with FEL, HST, and BH, quoted $25950 whereas the L3200 with the same was $26450. I was wondering if these prices were a little high as they seem to be to me. Also other than the L seeming to be a heavier frame what is the actual difference as the both have the 32 hp...

Am I seeing things, or are there two drain plugs on the oil pan? Drawing in the manual is not very good.

have done some internet research on the B3200 and there is a lot of older discussion about vibration issues at over 2,000 rpms. I can't find anything current. Does anyone know if these issues have been resolved by the manufacturer? Anyone purchase a B3200 lately and have comments about it? Thank...

Greetings. I live in North Idaho and will purchase a Kubota B3200 later this spring. The list price with FEL is $19,400 here. How much should I pay after serious negotiations? What is the estimated percentage off list that I should offer? Thank you for any advice and information.

We bought 4 led lights from automation to be mounted on the curtis cab. We mounted two today and these look like they could land an airplane. See for yourself... Only headlights is the first and the second is headlights with the cab lights.

Hello all, Looking for some help on fork setup on my B3200 with 504 loader. I have read some posts on forks and am looking to buy the setup from kubota. I have been given a set of forks and i am trying to find out if these will fit the kubota factory cage, saving me the cost of the forks...

I have been shopping for my first tractor for about a month. A nearby dealer had some Cub Cadets. I hadn't really thought much about them but now I am quite interested and need some advice. I have compared the CC to a Kubota B3200. Although they are similar, there is one thing that stands out...

Can any B3200 Kubota owners give me some advise on which 3 pt post hole digger would be a good fit for my tractor? Jr vs full size? I've been getting a lot of conflicting information from different dealers on which size to buy. Which one did you purchase, and are you happy with the model...

I've been looking for a tractor for about 3months and been lurking on this forum as long. This morning I bid online for a 2010 B3200HST tractor with 383hrs on the meter with the factory FEL. I bid $10500 and surprisingly won, Tax and auction fees make the price about $12,600. The thing hardly...

Seeking comments on the 50 hour service. Plan to change out the engine oil and filter as specified. The dealer did not have a manual for the B3200 - have been reading that factory now recommends just changing the filters on the hydro trans. Have also been reading about the messy oil condition...

I have 40 plus hours on my new B3200. I am noticing that the new 3200 feels like it will tip easier than my B7510. The 7510 loader frame is wider than the 3200 frame but has a smaller bucket. The 7510 is 48 inch and the B3200 is 54 inch. The narrow frame on the new style "braceless" FEL...

I know there are a ton of posts about worklight installs, but wanted to show my completed project. I have posted my front worklight install on a previous post, now I've also completed my rear worklight install and also a rotating amber safety light. I took advantage of my E1133 Sunshade mount...

I have opportunity to trade the New Holland TZ25DA wit 60" mmm, 48" quicktach loader on either a B2920 or B3200. Last winter blowing snow told wife could use another 5 hp under the hood. Have already a Metorite 51" snowblower, woods 52" tiller, woods 60" blade, 25 gal trailer sprayer and John...

Hey everyone. I just joined TBN last night and have seen some great projects and ideas. I purchased a B3200 this summer and use it for everything -mowing with a Land Pride 72" finish mower; front end loader (so much better than a shovel and wheelbarrow) and soon to try out the front end snow...

I am considering a grapple for my B3200 for some light duty work. The dealer is installing a single remote valve next week. Recommendations please.

I did a lot of searching for lights that I felt would give me sufficient lighting, yet put a reasonable load on my B3200HSD electrical system. Thanks to some folks on this forum, I got good pointers to some LED lighting that looked perfect for my application. Thanks to "SpringHollow", I...

Went to Harbor Freight Tools and picked up 3 of their mid-sized dolly's and tethered them together to create a dolly for my FEL. I also created little jigs on the top rear of the dolly for the loader kickstand. Works great! Each wheel can handle 250lb capacity, so this dolly is good for up to...

One other customization I did to my tractor is to add a warning light. I picked up this warning light from Tractor Supply Company. It is magnetic on the bottom and uses a standard 12VDC cigarette lighter plug/acc plug for power. I mounted the 12VDC ACC plug in the rear of the right plastic...

New owner here and I've been browsing the forums getting all kinds of good ideas and insights into my Kubota tractor. Great forum! Thought I'd share one of the 1st custom items I added to my tractor. I, as others, found it surprising that the mid-PTO did not come with a cover, even though it...

Exactly two years ago I bought a new B3200 Hydro with R4 tires. I used it for snow removal and cutting my meadow. I have discovered my little B3200 just can't do what I need it to do. We have 40 acres, mostly wooded, that I decided to start cleaning up since it's littered with black jacks and...

Just picked up a used Wallenstein BX40 chipper to use with my B3200. I tested it out before purchase and it works very well with freshly installed blades! The previous owner has an 8N (nice old tractor) and cautioned me I would need an overrun clutch and threw an old one in with the purchase...

Here's a few pics of the Lorenz 5310 3pt snow blower I picked up on Friday, on my B3200. I don't have nothing setup or adjusted yet. It appears my quick hitch won't be the best option for winter. It moves the load to far back (850 lbs) and the top hook well rub on the frame of the blower when...

I have narrowed down my search to these two tractors. I am looking at new, either a Kubota B3200 or Deere 2720. Both are right at/almost 32HP. I will be getting turf tires, as this will be my main mower. My lot is flat, I have about 3 acres of finish mowing (6+ acres total). Some of that...

I got it back up on all 4 yesterday afternoon after sitting on it's side for a couple days. I figure I will let it sit for a day before I try to start it back up. It was on it's left side. Anything I should be concerned about before starting - other than checking the oil levels and so...

Purchased a new Kubota B3200 a few months ago to replace a 2006 B7800. My B7800 did have some rattles and vibration, but what I'd consider normal. I took my B3200 into the dealer to get looked at because it feels and sounds like it's over revving and going to blow up over 2000 rpms. Most of...

I need to remove some SUDT from my B3200. It is overfilled and but I don't want to waste it. I thought about the a turkey baster but it can't reach the oil from the fill hole. I thought I might get some small tubing to put on the baster but don't know if it will reach the oil with out some...

After agonizing this week over specs I pulled the trigger on a B3200. I worked with Brady Barlow at Barlow Equipment in KY he came through with a great price and delivery to my door in NY. After personally looking at the Kubota 20 series, B3200 and John Deere 2520 it was a no brainer on the...

I have a B3200, almost 50 hours and about to go for service. In the last hour of use- while using my box blade I have noticed the steering getting very tight. Moving through 3/4 lock left or right or moving through center it takes a lot of effort. Raised the front off the ground with the...

Just bought a B3200 HST. Has been running for a couple hours then just hear a click and shuts down - another click and it is good to restart. I order shop manual for it, but won't be able to get down to dealer for a week or so. I'm guessing it is the motor stop solonoid. Anyone ever witness...

I'm looking for a compact tractor and shopping around. Funny thing when comparing weights. The Kubota 3200 is 1764 pounds. The Bobcat CT230 and CT235 are 3000 pounds! Go figure.

Hey yall its been a while since I've posted, so going back about four weeks, I was able to do a little work with my new to me B3200. I was taking out some large trees, when a little sweetgum took out my tractor hydralics. I have the light material bucket on the tractor, along with a extension...

I have the B3200 QA (on my B2920) and I have the forks but I want a brush fork with more tines to pick up trash. I found one for a SS. How hard (and how much$) would I be looking at to get a welder to modify it? I would also consider hay spears or any other tines that might attach to my QA but I...

First, kudos to poster BP Fick for a great pictorial description of all the service items. If you haven't seen it, I'd recommend it. I wanted to start a new thread to focus specifically on the hydraulic filter changes and some unique issues they present. On my B3200, the maintenance schedule...

Hi all, New to tractors and recently took delivery of a new Kubota b3200... Will be using it for snow removal in the winters, but a recent storm made such a mess of our property, I needed (wanted :)) some help clearing trails and retrieving firewood etc. So far I am very happy with it and am...

I have a 2005 B3030 that has around 475 hours on it. The only implement is a 60"mmm and grader box. I was thinking of going to a B3200 and getting a 60"mmm and FEL. I primarily use the tractor for cutting grass and grading a 600 ft long driveway and there have been times where I wished I had a...

Bought a b3200 to do some FEL work and mowing on about 8 acres of horse property. At the moment it has 60inch MMM that runs effortlessly but takes forever. Does anyone have have experience running an 84 with a B3200? I know it would be on the low end of req'd HP, but I keep the grass long and...

Parked my B3200 in the shop last night to preform the 400hr maintenance on it today. Came out today to a puddle of hydraulic fluid under the tractor. It seems that grass/hay wrapped around the drive shaft from the clutch to the HST and took out the seal (at the clutch housing end.) The only...

I have a new b2620 with the quick attach (FEL) from the b3200. It's amazing. There are supposed to be 6 grease points per side on the FEL, but there are only 4 zerks per side due to the QA. It's obvious (black grease collecting dirt) that the QA has two grease needs on rotating pins, but those...

Looking to upgrade my B2400 to a new B3200 with the hydro trans. I looking the bare tractor only as I have all the implements I need, a Farmall M with loader, and I'd take my remotes off my B2400 and transfer to the new one. What have you been paying? Thanks

I just took delivery of a b3200 504 loader and a bh771 week ago.Day for the first time went to go play with it everything worked ok untill i went to go use bbh to dig a small hole to burry ashes from bunch of papers i burned dipstick does not move at all.Everything else works great but not the...

Currently I have a bx2230 and a l3400 hst. Both have loaders, BX has 60 mower deck and the l3400 has a bh75 backhoe. The L doesnt get used very much any more so i am thinking about consolidating but need something bigger than a BX line. The big question is i dont want to "rebuy" a backhoe and...

Finally got my new B3200. It is awesome! Bad thing is it is 107 degrees outside.

My new B3200 was delivered last Friday and I noticed when I turn the key to engage the glow plug, it does not make a clicking sound like my BX25 did. It actually doesn't make any sound at all so I wondering if the glow plug is even working. Is there anyway to tell or should it be making that...

Had my heart set on a B3200. Started reading about the Vibration issue. Local dealers have not mentioned anything about it of course. Spoke with Barlow's this morning, and I asked them about it. Said there had been some modifications to the chassis to combat this issue. Does anyone know how...

I have been lurking for a while and reading about all the different models and options. Finally decided on the B3200. Picked it up today with LA504 Loader with 60" bucket, Quick Coupler, and Pallet Forks up front and a BH77 with thumb on the back. I also had them add the 40amp alternator so I...

I upgraded my BX25 to the B3200. I sign the papers tomorrow and hopefully will have it before the long holiday weekend. Price was $25,000 which includes LA504, BH77, quick attach, bh thumb, loaded rear tires and delivery. I am nervous about the shaking problem I read about when the RPM are...

The dealer said he will upgrade my bucket to the 60" for no extra charge. I noticed on the Kubota website it's listed as a 'light materials'. Since I don't plan on lifting feathers with it should I go with the free upgrade or stick with the 54"? Thanks

I am trying to figure up the weight of my B3200. I know the base weight is 1764 lbs with ag tires. I have the R4s, how much more are they, hundred pounds maybe? I also have the loader, there is a lot of metal bolted to the frame and the arms and bucket must 500 lbs or so. I also have the...

Hey all, I just bough the wheel spacer kit for the b3200, its two tick pices of metal with holes, and some threded bolts, no heads. Looks like I will have to use two nuts to put the bolts in, I am not sure how this works, any thoughts would be nice. Photo attached. I also bought the step...

Hi, As I stated in a earlier thread, I felt I was just about at my financial limit with the B2920HST with FEL and 60"MMM. After a review of the B3200 price, I may be able to swing the extra for the bigger tractor and FEL. Question, I will use it for landscaping, brushhogging 10 to 12 acres...

I've got 2 yards that I mow that have about 7 acres each. I've been thinking about a zero turn but have recently started considering a smaller tractor with a front end loader, which would come in handy for yard work. So far I have looked at a Kubota B3200 with the hydrostatic transmission and...

Just bought a Kubota B 3200 HSD this weekend from Erb Henry in Boyertown, PA. Just wanted to thanks the site and the forums for the discussions which I used to forge my thoughts and research going into the "deal." I thought about a Deere, but I looked closely at the 3032 and the 3038 and was...

I have a noise on my B3200 that I can not place. It starts at about 1600 rpm and goes away around 2000 rpm and is the loudest at 1800. It sounds like a lifter knocking but it does not change frequency through the 1600 to 2000 rpm range, only loudness. It appears to come from the front right...

Just compared spec between the 2 and am curious as to how they get 2 more pto hp from one more engine hp? Near as I can tell the tractors are near identicle. One pound difference in weight, same engine, same rated rpm etc. Anybody know:confused::D

Hello to all, Hit the wrong button didn't get a chance to write anything:ashamed:... Here is what I meant to write... I have 2 acres of wooded property which I have alot of landscaping to do and lots of time to do it. I will be adding 200 plus yards of fill, topsoil, seed, etc. I want to...

I have a kubota B3200 and im not sure what to put in the ballast box while im moving dirt. I had 2 5 gallon buckets filled with dirt but i think i could have more weight. What do you think the best thing to put in there would be?

Recommendations for medium duty unit? What does an add on like this cost? How hard are they to put on and take off so I can use the 3 point and PTO? As you can see, I'm absolutley new to the BH club. Looking for seasoned advice on equipment, prices and difficulties in putting it on and...

let say I wanted to drop the bucket and attach a home made frame that I can attach a variety of forks to. I don't have a set of QA's, so I would have to take the time to remove the pens the hard way. But if I was going to use the forks for several days or a week it might be worth it. So if I...

Hello! I've poured through these forums over the past week or so and am really appreciative for the wealth of knowledge and experience from you all. My wife and I just purchased a house in Michigan - it's on 10 acres. I'd say it's pretty close to half irrigated, manicured lawn and half...

Well, B3200 has made a trip from Buffalo, to Louisiana, via KY. I was glade it made it early Wednesday, and I got to play with it some, and now its at my Brother's, so I hope he enjoyes it. I loaded it up on my 16ft trailer, and its just did fit, any way brother said this new tractor's BH 76...

Just got off the phone with Steve Barlow, and then Donnie the Driver, I have a used B3200 from Barlows, enroute south, it started its trip in Buffalo NY area, and is now traveling thru Arkansas, it should be at my place by tonigth I hope. He has one stop in Shreveport first. I belive that the...

I'm upgrading my B3200 to an L4400 Most likely. I love my B3200 but within months of owning it, I began to think I should have got an L series. JohnThomas' thread about your first tractor being a test tractor makes sense to me. I have had my B3200 for year and a half, and pretty much have found...

Well, I finally pulled the trigger on the B3200 TLB package that I've been checking out for some time now...and I wanted to say thanks for all the great info/advice that you guys provide here on the forums. :thumbsup: Now, it's time to get it dirty. :licking: ...I'm actually looking forward to...

Barlows had/has this on their lot this morning in the sold row. Wonder who it is going to in Louisiana. Tool box on the arm rest?:confused: Tractor looks new!! Reinforced bar on FEL bucket.:thumbsup:

Would anyone with a B3200 please take a couple of measurements? I would like the measurement from the ground to the center of the rear PTO. Also the measurement from the ground to the bottom of the rectangular hitch receiver. Thanks, tp

I am in the process of purchasing a new B3200, LA504, LP 5' finish mower, and LP 5' Box Blade. Quote price is $18,000.00. Sound good? Thanks!

Howdy Folks, I have a 2010 B3200 hydrostat drive 4X4 that I bought new last May and have about 200 hours on it now. It has the following accesories: LA504 Front End Loader 2) buckets, both 54 inch Kubota brand Pallet forks with forklift plate Quick Attach setup Fluid Filled Rear Tires by...

So I rolled my 3200 over yesterday. did not have my belt on and i jumped off as it went over. first thing i did was to shut it off because it was still running. tried to get it back up with my rtv 500 and that was a no go. then tried with my honda pilot and still nothing. had to call a tow...

Hello, Looking at a Kubota B3200 with a Land Pride rototiller for our six acre alpaca farm. We also do two acres of organic vegetables. Is the B3200 big enough? It is a little wet till later in the season. I would use the rototiller to reseed pasture also. Can't afford the hard Kubota cab, does...

Dropped a bunch of trees a few months ago. Been plucking at them here and there bucking them up and splitting them. Once they were cut they were just stacked which made a mess getting them out later to be cut. My B3200 has been working its tail off hauling the logs out to be cut, pushing the...

I have 40 acres in NC mountains with 8-10 acres flat land to mow, a 1/4 mile gravel driveway to maintain, and food plots that require a trip up pretty steep logging roads with a mower or tiller. I also will get a FEL for hauling firewood and trash mostly. Is the Kioti too heavy to get up steep...

I have 40 acres in NC mountains with about 8-10 acres grass to cut, food plots to maintain, and a 1/4 mile gravel driveway to maintain. most of the grass to cut is flat land but the food plots require a trip up some pretty steep logging roads with either a mower or a tiller. Also plan on using a...

Hi all, So here's my story, had been looking at used tractors for quite a while and Christmas morning the wife pulls out of the woods on a brand new Kubota B3200 TLB. Now it's time for some upgrades, I am looking to add some rear remotes for top and tilt. I've read some posts about adding...

A question for anyone with a B3200 and also anyone with a B3300 with standard 54" bucket and R4 tires. Do the R4's make the tire/tractor stance wider than the 54" bucket? I saw a B3300 and you can tell it had larger R4's (didn't have a tape with me), can you order it with the B3200 sized r4's...

Well it was around -15f this morning. I went out to use the tractor and it had warmed up to around 0f and I could not get my b3200 to come to life:mad:. It sits in my open garage so it is not in direct wind contact. I do not have a block heater but I guess I will need to get one. I never had a...

started pricing the JD 2520 because of the quick change bucket (FEL) and other quick attach implements, tractor with R4, 62" MMM, 200CX loader is $18,500 (before any taxes). Then of course I had to look at Kubota (have owned two), so I priced B2920, FEL, 60" MMM and was at $18,500, then looked...

Does anyone know if Kubota gives any specs on max axle capacities. John deere gives the load capacities in there specs but Kubota does not. Or do you load up with whatever the 3pt and loader will lift and call it good.:confused2::laughing:

I tested out a B3200 yesterday and was really impressed. Other than the usual vibration complaints, but sounds like there is a cure for that now. I've read everything I could find on them, but still unsure how the MMM deck is attached. Is it a drive over or do you have to wrestle it under the...

Allright everyone, I have decided that it is a moral imperative to upgrade to a new tractor. Therefore I am stuck between the two, any thoughts are appreciated, and ideas on price are accepted also. PM if you want to be kept anonymous. Both fit the roll of what I want it to do, and the cab...

I started this prodject back in Sept and have been waiting to post untill It was done but I am looking for some motavation to get myself working harder on it. I will post a bunch of pictures and hope to take many more as I finish this thing. Any way here they are let me know what you think. Rob

Has anyone gone this way and wished they had not. I like the looks of the L3200/3800 and wonder if I would be happy with the switch or wish I had kept the B3200 for its size. I like the idea of a little more tractor plus more loader but I do like the maneuverability of the B. Ideas, experience...

Do you think my b3200 would have enough power to run a woods 90" rear finish mower, (pull, not lift) Thanks

Price check please on a 2010 B3200 HST. Backoe, belly mower and front loader?

Has anyone adjusted the loader relief on these tractors or any B for that matter. I cannot find any reference as to what the pressure change is per shim. Does anyone know or have experience with this adjustment?

I just had the 40A alternator upgrade done on my B3200. It was installed by a local dealer. I went to check my oil yesterday and couldn't reach the oil dip stick from the top. I had to reach under the side cover to get at at and then it was not easy. I recall there was an extended dipstick that...

I have a B3200 with about 30 hrs on it. I was pulling some saplings out yesterday and had occasion to use my Diff lock. I was in Low range 4WD and didn't have enough traction. I stopped, let the pressure off the chain and applied the diff lock. I started off slowly as to allow the lock to...

I did the search & came up empty & I'm sure I've heard others mention the floor mat on the B3200 moving around. Anyone have a solution?

Have read a little about chain hooks and excessive vibration but I pulled the trigger..brought the princess home today..1800 rpm mowing does more than I can see necessary for any grass with a 60" MMM and the bucket gets really fast unless you are production your just wasting fuel..Can someone...

I am curious about something on my B3200. The rear wheel lugs are all large bolts that are screwed into a threaded hub, except 2 opposing ones on each wheel. These are bolts that come through the hub and rim with a nut on them. What is the reason for this? Russ

I finally switched over to R1 ag tires on my B3200 and based on the hour or so I have put on them this afternoon, it was money very well spent. The traction is incredible compared to the R4s, it feels like it increased traction by nearly double. I picked them up Friday, the dealer had the two...

I'm back to thinking about adding a couple SCVs to my B3200. I would like to use a standard, compact, 2 spool valve, open center. I would just install it 'in-line' in the pressure line that goes from the loader valve to the 3pt hitch. i.e. loader valve power beyond port > in port on valve, out...

My brother (who has a really heavy 2WD tractor with weighted Ag tires - both calcium and steel) says my B3200 with filled R4's (4WD) will never pull a single bottom plow. I don't know much about pulling a plow as I have never done it before but I am trying to put in a really simple french drain...

I just purchased a new tractor with the Kubota backhoe. The problem is where the rear hose is located, witht he backhoe mounts, puts it into the path of some of the implements for the 3-point hitch. When I raise the hitch up the hose can get pinched between the bar and the backhoe rear mount...

Sorry, but I cannot find this online and my dealer is closed. I have a B3200 and they gave me some filters when I bought the tractor. I changed out the HST filter and now when I look at the engine oil filter, it is much shorter than what is on there now. They gave me part # HH150-32094...

I'm about ready to get a box blade to use with both my B3200 and Ford NAA and was wondering what the general consensus is on BB size for the larger B series tractors? It seems like 5' and 500lbs is about what most people like, but I will be using it commercially for cut and fill excavating...

For those that often wonder how steep a hill their tractor will climb, I posted a couple pictures of hill I routinely climb with my B3200. The first 15 or so feet going up is at a minimum 40 degrees, maybe more. The rest of the hill is well over 30 degrees. Low gear and 4wd and she climbs it no...

Finally, after all the agony and painful researching my B3200 is being delivered tomorrow!! Got a MMM/Snow blade/ and loader with it. Loaded R4's. I know i have read a lot about the 3200 vibrating and hope I am not dissapointed. Thanks to all on this forum who gave me advice!!

Ongoing saga with my dealer & Kubota. At issue is my 72" MMM that can't be pinned without the use of a floor jack...... Dealer dropped by with the Kubota service rep yesterday to look at the problem. Service rep thinks there is a compatibility issue, since the MMMs are manufactured in Japan. He...

I've decided to get rid of the B3200 with RFM and go to a B2920 with MMM. I figured I would share my expieriences. The Good Great tractor for loader work Plenty of HP The Bad Keep checking for bolts that have vibrated loose, I lost 4 bolts before I learned that habit Keep blowing...

Just ordered a B3200 and am feeling sick after reading all the posts where people have had trouble. Does anyone like theirs??? Have you been able to put a descent amount of hours without Troubles??? I am half thinking of cancelling!

I finally decided to order the Long OBG2 48" grapple with the Long third function valve. I am going to have a local Kubota/Long dealer do the install. I have a Kubota quick attach which will work with the Long grapple as long as it is set up with the LA504 pin out, which I asked for. I can't...

I have been pricing tractors for a couple of weeks and have narrowed down to the B3200 and L2800. Haven't made up my mind if the mid-PTO is a must have but I really like both tractors. I understand pricing is influenced by the region and other factors but I'd like feedback from you all on the...

I'm thinking about buying a B3200 and was told by the dealer a 48 inch rotary cutter was the right size for this tractor and a 60 inch would be too heavy. Anyone have any experience with this tractor. I prefer a 60 inch because I can get the slip clutch option.

I am an associate pastor at a church in Mc Calla, Alabama. Twenty years ago our church purchased 45 acres on which to construct our new campus. About 4 years ago, we completed the first phase on our new property. The first phase included clearing about 15 acres and constructing a sanctuary. The...

I am seriously thinking of trading in / selling the BX24 for either of these 2 models with a backhoe. I use the BX for caring for the 4.5 acre horse farm / house I have. I want something I can mow the lawn with but yet work clearing the land in the back. I have reached the end of the BX...

For those of you that have changed your filters, was the replacement filter different that the filter that came on the tractor? I purchased all 3 filters. Engine oil, HST, and hydraulic. There were no issues with the Engine and HST filter. However, the new hydraulic filter is shorter and the...

I've been using my tiller the last few days. All was going fine. This afternoon I was running threw some dirt and a bunch of it kicked way up. It was sort of weird. I got off my seat and I see fluid spraying against the rear inside tire :(. My jaw dropped....only 20 hours and not even a...

I am another one of them Lurkers, and I have a story to tell if anyone would like to hear. I have been looking for a Compact Tractor for a few years now but could never commit as I was raising children. I have an unusual commitment to my property. I have 30 acres in north central TN. of which...

New owner here. I just purchased a new B3200 with loader. Now I am needing a rotary tiller for garden work. My dealer says this machine will handle the above tiller, but my owners manual specs a max tiller width of 50 inches for this tractor. The RTR1558 is a reverse tiller of 58" width...

Well, after many months of research, it has finally arrived. We have a new house and I have lots of outdoor work to do. I'll use the tiller to reclaim the adjoining field and then roll the seed. The blower will be great for these buffalo winters. We have stone, but in a week or two they will...

I'm not sure if its because it's an indirect injected engine or what, but unless I use the glow plugs for a few seconds (even if it's 70-80* outside) it won't start. Doesn't seem to matter if the throttle is at idle or mid throttle, without preheating it just doesn't start. Once its been run...

I have finalized my purchase decision on a new tractor to either a B3200 or the B2920/B2620. I have about 6 acres, the majority of which is wooded. I will be establishing trails, doing a lot of loader work (I have gravel on the property), grading the area around my new house and scraping the...

Hi all, I have 5 acres with horses...tractor mostly for arena dragging, but want to get most bang for buck and not feel like in a year I will want to do something else and tractor is too small. I am in California. New from Dealer L2800HST R4 Industrial tires $15,700 tractor 463 loader $4100...

Hello, I posted this in Attachments, But possible it belong here as I had no advice. I'm looking at MMM decks, & Kubota's RCK60-27BA deck is stock for B3200 tractor, but allot of RCK 60B - ??? used models are available for 1/2 the cost. My question is, The # at the end must be Tractor Specific...

Hi. Total newbie although Ag based son is helping me. Got a price on a B3200HSD with FEL, BH, and front mount 51 inch high capacity snow blower with hydraulic chute rotator and electric chute deflector. Price was 29,335 + 500 frt + tax = 31,500. List for the unit on the Kubota site is about...

Wrong Place for my posting :-(

I keep going back and forth on these two models as I will be buying one of them very soon. I know the B3030 comes with position control which appears to be the biggest advantage over the B3200, but it also has some of the creature comforts too. I spoke with my dealer again, who is a very...

I picked up a B3200 with FEL and I wanted to add 2 work lights to it. I am looking into the LED work lights that are available. So there will be no power issues with adding these lights. I will mount them on the ROP bar without drilling into it, if I can. My question is where to get the power...

Hello, I went from a B7800 TL to a B3200 TLBH, I'm not to inpresest with the loader. It seems cheaper then the one that was on the b7800. I have the Kubota QC bucket and i'm thinking I dont like it. What does everyone else think.

Last week I had decided on a B3200, then talked myself into a BX25, now wondering if the Massey GC2410 might be a better choice. Prior to that I was looking hard at the Yanmar CCs, too. I like the small footprint of the scts, but the extra power of the 3200 is compelling. I will need a mmm 2x a...

Greetings everyone, I am another newbie who has lurked here for a while but never posted.:newhere: I am going to be hopefully doing a step up this spring. I have a BX 2350 and have had it for one season. I plan to move up to a B3200 or a B2920. :licking: The BX 2350 is a fantastic lawn mower...

Last question, I am buying one of these this week. I know the B3200 will handle mowing (w/ bush hog) my 4 acre horse pasture, and cleaning my extra wide horse stalls. It is lighter, so it shouldn't tear up my yard/pasture as badly. Other than a few ditches, my land is very flat. But am I...

Well I'm cheating a little as hubby and I have not yet taken delivery of our B3200 HSD 4WD with LA504 FEL. We've signed on the dotted line, got financing ok'd, and have one in the crate ready to be delivered but they come with the industrial tires and we wanted the Ag tires, so when they find...

OK, there are two Kubotas, same price with different dealers, the L2800 and the B3200, with HST and 4WD. Very similar, on paper the B3200 has a bit more power than the L2800 but the L has the bigger body style, etc. Which one should I go with? Thanks for the advice, and I apologize for all...

I am about to buy my first tractor. I am going to be mowing 4-5 acres with a 5' bush hog, and moving horse manure, sand etc. on a limited basis with a FEL. Do you think the Kubota B2620 can handle this adequately, or should I get the B3200? Thanks for any advice you can give me! Also-Kubota...

Was in a bit of a hurry in late Dec (09) to get in on KCC's 0%/60 months (yeah, I know, it's been brought back in March, oh well..), so I traded my 2001 B7500 (Woods FEL, 54" Kubota MMM, 425Hrs) to the dealer. I normally sell my tractors outright, but it was the dead of winter & I wasn't sure...

Hello All, I am getting ready to possibly pull the trigger on a B3200 w/ FEL. One dealer says he has one still in the crate that he thought he could make a very good deal on. He seemed to think it was a year 2008 but I'm not sure the B3200 was even out at that time ?? Anyhow I'd be...

I was wondering if someone could answer this question for me. Does anyone know, or does someone know how to find out if an RCK60-27B mower (for the B2910/B7800) will fit onto a B3200 ? I know they officialy list the RCK60-27BA for that model, however since the B3200 is so similar to the B7800...

Please enlighten me on these 2 tractors, I beleive them to be close with the exception of weight and some of the Bell and whistles that are found on the CT. I'm deciding on these 2 machines as the Boss has lifted her price ceiling so I may move up from the BX. Thanks in advance to everyone

Last August I finally bought "the tractor of my dreams". It was a new 2009 B3200 with block heater, filled rear tires, and an ATI skid steer quick-tach. I found a used 6'6" Western plow and welded up a plate to use it in the winter. Life was good. But who really sees the divorce that is...

Noob here, but "lurked" and learned alot from the forum...I just recently purchased my first tractor Kubota B3200...Only have 4 hrs on it, but waiting to get more when the weather/rain will cooprerate. I see alot of ya'll talk more favorably about the 3030? I never looked at the 3030, guess I...

Marvin from Barlows picked up my B3200 trade in today with part of the implements that go with it, the Landscape Rake. The 12" Auger post hole digger and 6' Landpride RFM are still at my home to be picked up, Hope this B3200 finds a good home:) I've been good to it and only ran it for 34 hours...

The vibration issue already being discussed here on the boards. AND The tractor is just to **** light for the power it has. I wish I did better research before hand and maybe got an L series instead.

Had a chance today to go look at tractors. I am looking to buy something a bit bigger and would like some advice from the group especially form the guys who own the above mentioned models. I currently own a B-7500 and it has served me very well over the past 9 years I just feel the need for...

Other than the obvious hp difference are there any significant differences between the B7800 and the 3200? Are they built the same or is one built tougher than the other?:D

Went to the local dealer today to check out the newer B3200 with FEL. While I was there talking to to sales people. They suggested that I also look at the B7800 with a FEL. They currently have both in stock. Both still boxed, not weather damaged. They felt that the 7800 series tractors had a...

Does anyone know how to adjust the fuel delivery on these new engines? I know how on the older ones but not the new. I want to tweek it just a little but can't figure how to do it. Anybody know??:confused::D

Going shopping today for a BX25. Taking the title with me for my B3200 with 40 hours on it. Since Barlows is on my way I will stop there and see if they are still in the trading business.:D The answer is 10.

After this most recent snow I'm really considering a set of R1 tires for my B3200. I was going to take a couple round bales out to the cows and absolutely couldn't make it up to my barn in about 8" of snow (moderately steep grade). Had to go back and put the bale spear on the back of my old Ford...

hi folk's, mounted ballast box on my b3200's 3ph. it is ~ 6 inches off the ground in the down position, so you can not take the weight off the tractor when not in use. my question is, is this the correct box for my tractor, do i have it mounted incorrectly, or do i just need to use some cribbing...

hi folks, purchased my B3200/fel the end of october. also ordered the 63" front snow blower. dealer said it would take around a month to come in. well, i'm still waiting! dealer has the blower and drive shaft, but can't seem to get the mounting frame, which apparently comes from a different...

Hi, I'm very new to the forum (just registered). But I have been reading it for a couple of days, a lot of good information - thank you all. I live in Maryland, and am planning on purchasing a new B3200 with FEL and 60" MMM. I'll also get a rear grader blade for snow removal. I will only...

I'm looking to purchase a new rear blade in the near future and would like something pretty heavy for dirt work. If I can find a good used one I would like either a Woods HBL72-2 or Bush Hog 70-06 blade. The Woods weighs 530lbs and I imagine the Bush Hog is similar. This should be within the...

I'm looking to put a rear remote valve on my B3200 and I'm not interested in spending the $700 that Kubota wants for it. However, I would like a nice, clean, factory appearing setup. I was wondering if anyone had the Kubota rear valve on their tractor and could provide some pics and any info on...

hi folks, great site, very informative. have a few questions as this is my first diesel tractor. 1. when starting tractor in the cold, it smokes pretty bad for the first few seconds before smoothing out. is this normal? 2. does the differential lock only work when in 4 wheel drive? i've...

Ok my next problem is deciding on what bucket to go with. I currently own a b7800 and I have a tooth bar on it. I love it. I would like to get a quick connect bucket for the B3200 that I'm looking at. Are both buckets the same? I've been told that the quick connect bucket is for light use only...

We have about 15 acres, half of which is a horse "facility". We have some hills, no real rocks or stumps sticking up. We mainly are looking for a tractor that is set up to mow and have a FEL. We are looking at the differences and would like recommendations for either the Kubota GL3240 or the...

I have the B3200 and would like to add extra lights and mount on the roll bar. Is there any extra wiring for this that is handy that I can use other than the 1 set Kubota puts on for the rear light they sell? Also the roll bar interferes with the 3pt top link when it is folded down. Has anyone...

B3200 TBL is $23,200.00 add on the 5' box blade and 5' shredder county fees and Kubota insurance out the door price is $26,345.23. $2,345.23 down payment finance $24,000.00 payments of $400.00 per month for 60 months.

Does anyone know (or would take the time to measure) the pin size and spacing between the pins on an LA504 FEL? Also, the spacing of the arms at the bucket would be useful too. I'm trying to figure out how difficult it would be to modify some pallet forks for my tractor. Thanks.

As outlined in this previous thread my B3200 has some significant vibrations when operating at/or close to PTO speed. http://www.tractorbynet.com/forums/kubota-owning-operating/143816-b3200-hydrostatic-transmission-pedal-vibration.html Well this morning I got a call from my dealers service...

Hey Everyone, I'm looking at at buying a new B3200. I have a couple of questions that maybe people can answer for me. One what does everyone think of the quick connect bucket?Can you put a tooth bar on it? How much lifting/ carrying capicity do you loose? What is the difference between the...

Does anybody know of a non spooling seatbelt retrofit? The stock one is totally unusable for typical applications. Russ

Does anyone know what all is involved in changing the platform on a B3030 or B3200? That is.....if I can get the platform replaced under warranty. Dealer would be too far away to take the tractor back. Thanks!

I am considering the purchase of a new b3200. I am concerned about the lack of sealing around the cheesy plastic front grill. Has anybody run this tractor in dirty conditions?

Last weekend the wife and I were using our ~6 month old B3200 cleaning up after clearing some trees on our property. We had a trailer load of limbs to haul away (burning restrictions were still in place) so we just shut the tractor down and left it "out back". Well to make the story short, the...

I have a Kubota b3200, and when I am lifting with the 3-point, with the mowing deck off, it is "digging into" the lift arms @ the area of the lift brackets for the deck. THey are the orange "L" type brackets that ride on the top of the lift arms, my apologies if I have the actual name of them...

I have a new B3200 which replaced a L2550 that I had for over 20 years. I found the seat and operators area on the L2550 to be very comfortable (I am 6' and 275#). The B3200, however, leaves a lot to be desired. I understand that the L2550 is a bigger tractor but the issue is the hieght of the...

I just purchased 14 acres of open field and I know my 5' belly mower will feel way too small, Will my b3200 handle a 7' finish mower?, thanks for any input.

I am a tractor newbie........I have a New B3200 (32hp - 23hp PTO) sitting in my driveway from the local dealer.....said I could try it out at home :). It has a 60" FEL, HST, Bradco 3265 hoe w/ 4 point mount. I already tried it out at the dealer and now at home.....I am going to purchase it, I...

OK I'm looking into swaping my B2150 with FEL for a B3200 that has a backhoe w/thumb and FEL. I paid 6000.00, 8 years ago with a MMM that I have since sold and put a woods FEL on it. I have many other attatchments that I am keeping. The dealer estimating a swap for 18-19 without seeing my...

I have B3200 that I use with a FEL and Backhoe installed. Sometimes I have the need to attach a tow strap to drag a log out of the woods. The BH76 Backhoe blocks access to the drawbar, so I need to attach a nylon tow strap somewhere on the backhoe. The attached image shows where I think I can...

First off what a great site and informative group of people thanks for being so welcoming. No sucking up intended but I have gained a lot of information here and now need some more specific opinions(facts are welcome as well). I am buying a new tractor in about a week and keep going back and...

Anyone know of recent prices on a B3200HSD with 60" MMM and FEL? THanks! John

Does anybody know what these four 12 mm bolt holes on each side of differential are for? Cheers

I asked my dealer about 2 weeks ago to order me a QA Kit for my LA504 loader....dealer said "No problem".....then called back that day and said it would be to the dealership on 3 August. This morning my dealer calls and says that Kubota now says that it would be sometime in September before...

I have a B3200 that I took delivery on last month. I am a big guy...6', 300# and find the standard Kubota seat (non-rotating) to be a bit too low and slightly forward (Higher seat would help more than moving back more). My knees find it difficult to bend to the HST pedals, especially reverse...

I just picked up a b3200 and its getting dropped off tomorrow. Im wondering how big of a trailer Ill need to transport it. I currently have a 14' equipment trailer but am worried that it wont fit. It has a BH and FEL and if need be the BH can stick off the back of the trailer as long as the...

New to posting to this site, I've used it many times for information. Thank you all for that. I currently have a '98 JD 4100 with FEL and want to trade up to a larger tractor. I've narrowed the choice down to either the B2630 or B3200. We own 11 acres, mostly wooded, I'm always moving dirt, snow...

Hello all, I read the forum for months before deciding on which tractor to buy, and decided on the B3200. I bought a 14 acre property with 4 acres of field. The entire property is tucked into a river valley in SW PA. Most of the property is on a hillside of 15 degrees. I went with the 72" mmm...

Written specs and info sheets only go so far. Here are side by side pictures. B3200 60" Light metal:) bucket. BX2660 60" MMM. These are both great machines. They are just different. Here's hoping no one can say I'm putting their BX/B down by showing these pictures of both of my tractors. I like...

Just got done ordering a WR Long OBG2-48 Grapple and a Electric over Hyd Valve Kit. Hope to get it in sometime next week to install, and pics to follow! Stu

I just purchased a couple months ago B3200 TLB. Anyone out there have the quick attach blade? Talked to dealer this morning and was told that for the manual blade i would just remove bucket from la 504 loader and attached the blade in it's place. Cost for this was around 1600.00 which sounds...

I have a B3200 and I will be getting a front mounted snow blower for it. My question is: can the loader be used with the quick hitch sub frame still attached (Snow blower and drive shaft removed)? How much does it reduce the ground clearance? Thanks in advance. Jim

For those that are interested, here is a typical remote hydraulics setup and config. For your information, make sure that you order the right ones for your use and application. First one is standard up and down / open / close (please excuse the likely incorrect hydraulic terms) Once you have the...

I've seen here that the B3200 FEL quick attach can be used on the B2920/B2620 (and B2320?). I'm assuming that the B2920 and B2620 are using the LA354 FEL. I have the LA352 FEL on my B7610, and was going to pay to have a QA of the same design made for it, but was wondering if the B3200 QA...

I'm wondering what the light materials (LM)bucket on the Kubota b3200 is. Is it just an oversized bucket for the tractor, I know it is 60 inches. Is it lighter gauge steel or the same as the stock 54 inch? Does LM mean you can't pick up a 700 pound rock in it or fill it with wet gravel or heap...

I have seen them available, but has anyone seen or put an aftermarket cab on the 3200? I've looked at the 3030 and for the additional creature comforts vs the price- i just cannot justify it for my needs. Really, what I am looking for is shelter and warmth when plowing in the winter. A heater...

I just got a b3200 and one of the things I want to do with it is run a 3pt wood splitter. I was using this on my 7510 (it was slow but worked). The 7510 was easy to do the loop and I figured the 3200 would be the same. When the tractor got delivered I looked at it up on the truck and saw the...

Well as you might already know I sold my b7510 in hopes of buying a b3200 and it became a reality on Monday. I went with out a tractor for a week and had to mow the lawn with my sons John deere 170 lawn tractor. Great deal I used it one week and had to loan him a battery, buy a mower belt and...

Hi everyone, Well since the nearest dealer to me is 70 miles away I decided to do the 50 hour oil and hydraulic fluid change in my small shop.. What a Pain in the Butt !!! The oil change wasn't a big deal but the tranny and hydraulic fluid.. HA !! The problem is that the subframe makes it...

Hello, first post, and I am looking to get a b3200, test drove one today but my reservation is using hst on a large 5 acre yard. I was thinking my foot might get tired holding the pedal down continuously. Does anyone have experience with this in a large yard? do you get foot fatigue or did you...

Ok, folks - first post, but I've been cruising around TBN for a few months as I researched info on my first tractor. I feel like I know many of you already! After much looking, I think I've gotten it narrowed down to the Kubota B2920 or the B3200. I know about the 2620 and if the 29 wasn't...

Hi TBN folks after much deliberation and my family sick of hearing about my tractor lust! I am going to buy a tractor. I have narrowed it down to the b2620 tlb with thumb. I have 2 acres, no mowing needs, mostly landscaping and backhoe work. stone wall rebuilding and snow removal on 4...

Hi Guys, I just did my 50 hour service (oil change only) on my B3200 TLB. The manual says that at 50 hours the hydraulic and transmission filters are to be changed but the fluid does not have to be changed until 400 hours. I'm very easy on my tractor, mainly cleaning ditches and box scraper...

I've been researching this vibration issue in the B3200 series tractors, and it seems to be something worth paying attention to so far. But I was offered an opinion on the B3200 as it compares to the B3030. Some in the business seem to feel the B3030 is the best between the two. Kubota even...

Found a round pin on the ground about 6" long and had a small leg off one end that made it look like a L. It looked shiney and new. Looked around my B3200 and found that it's the pin that holds the QA (not SSQA) bucket on at the bottom. The remaining pin had a ring clip holding it on. I put the...

Hi Team, Just got my new B3200 this week. :) I traded in my B2910 that was 9 years old. I kept my 4690 backhoe since it only had about 50 hours on it. Anyway, I noticed that the B3200 does not have as sturdy of a 3PH as the 2910 (I think they installed a beefed up 3PH and topllink with the...