My B2920 has rear chains on Ag tires. Using with a blade and bucket to move some snow. I am noticing a dramatic decline in the ability of the rear wheels to provide any help with moving the...

I need a trailer and it seems to be the worst time on history to buy one. I think I need the HD rear gate...the trailer will be general use so not too much time w tractor but i dont want ot to...

Hi everyone, I received my wr long true 3rd function kit yesterday for my B2920 / LA364. So far, it seems pretty simple but I haven't started the install yet, just scouted things out. I got it...

last night i was pushing some leaf piles back a little - zero load on the tractor and the rpms fell off , it barely ran then it stalled. i let it sit, it turned over slowly but wouldn't start. i...

I just can't make my mind up as to what I want to do. I am talking with a guy who has a B2920 with FEL, finish mower and a couple of other small attachments. I may be able to get it for $12,000...

Hi, This is my first post on the forum! I've learned a lot over the last year reading on here. I have a B2920 I bought with my house last year. It has Turf tires, 33x12.50-15 on the rear and...

I would like the longer lower tines or teeth. what is a well made unit? i have the front loader QA - I think from a b3200? i have forks for really heavy stuff so for this i would prefer not too...

I have a Kubota B2920 with 90 hours. Has always run fine. Now, at random times, under PTO or not, it will start sputtering and possibly even die. I just changed the fuel filter and that didn't...

I sucessfully removed my backhoe. I recently installed my three point hitch. But for some reason the 3pt hitch goes up but won't go down. Any ideas ? Any help would be appreciated. Jim Connecticut

I have had my b2920 for about 6-7 years now. It has been a great tractor for me mowing 3-4 acres and general light dirt work. Tonight I found a screw in my front tire and will hopefully get it...

My question is about hauling a Kubota B2920 tractor on a Rice 6'x12' single axle trailer. The trailer manufacturer says the trailer is rated up to 1700 lbs. The Kubota B2929 is 1550 lbs...

I have a 2013 Kubota B2920 with LA364 loader. Last fall the dump and curl function of the bucket suddenly became very erratic, particularly curl. Also, hydraulic fluid would leak out of the...

I just got a good deal on a nice JD 350 7' sickle bar mower. I just dont know if it's too much for my B2920 Kubota. the mounting width of the pins for the lift arms as the same as my other...

Hey guys Used tractor a couple weeks ago to bushhog. Has not been used since. Seemed to run fine then. When I went to start it yesterday it won’t turn over at all. Lights work, makes clicking...

I知 new to the forum so let me know if I知 doing anything wrong. Ok so I have a little B2920 and I知 looking for the logic of the electrical control box. I have the wiring diagrams and it just...

Has anyone replaced their stock seat with a suspension seat. When running rotary cutter on pasture I get bounced around all over the place so I wanted to change my seat to something that would...

B2920HSD Tractor is in good shape and was used until winter. Parked it in the barn and when I went out to start it, it cranks and cranks but won't turn over. I charged up the battery again...

Hi everyone, I just posted a Youtube video of my B2920 restored back to it's former glory after it was completely trashed in a prison riot. Kubota B292 Tractor With A Criminal History - YouTube...

i have a b2920 sub compact tractor. i am looking to make it look nicer. where can i purchase new lever grips with the factory colors? thank you! mark turik :cool2:

Mowing yard with belly mower on low. Heavy grass, so I raised deck with black lever on right side. Deck came up but will not go back down. Mowing with deck up is great for pasture but I'd like...

I have 4' Land Pride rotary mower and a 5' Land Pride finish mower I pull with our B2920. Can someone point me to a video or thread that shows me how to grease to pto shaft and u-joints. I have...

So I was running the tractor....mostly mowing (PTO RPM) for maybe 3-4 hours in ~90 degree heat yesterday. When I pulled it into the barn, and turned it off....I heard a noise continuing in the...

When I was installing the sub-frame for my new BH65 back hoe, I noticed that the hydraulic filter (filter on the right side) was bent up pretty badly. Apparently I had done this bush hogging some...

I picked up a low-hour(59) 2013 B2920 TLB from a private sale over the weekend and I'm trying to get to know it. The tractor did not come with a 3pt hitch and I'd like to purchase one. The local...

My house has a 1000' driveway and clearing snow with the FEL and back blade just wasn't cutting it. Being that the driveway is that long, I really didn't want a 3-point snowblower. I kept my eye...

I recently purchased an ALO backhoe for my Kubota B2920. I am looking for advice and parts sources for hydraulic hook-up. My tractor currently has a Front End Loader. Any help would be appreciated!

Hasn't happened yet, but I use my tractor way back in the woods and sooner or later I know I'm going to break something I can't easily fix. Can I put the tranny in neutral and tow it back to...

Been a while since I've been on here but I figured this was as good a place to start as any. Two years ago I bought a nice B2920 with the 5' deck, loader and the whole nine yards, super solid...

Been a while since I've been on here but I figured this was as good a place to start as any. Two years ago I bought a nice B2920 with the 5' deck, loader and the whole nine yards, super solid...

I guess my B2920 was designed to operate this way, but it is really annoying to have to keeping looking back there to see how far the front of my rotary cutter has sagged and them bump it back up...

I am looking to buy a snowblower for my Kubota B2920. I went to my dealer and got prices. He gave me prices on a B2781B blower with hydraulic chute rotation and a BX5455HD. Does anybody have...

Have been researching, reading, and calling around for the last week. Decided for my needs a B2920, B3200/B3350, L2501 would suite Dealer has a New 2013 B2920 w/FEL Unit has 1 hour on it...

I would like to replace the turnbuckles on my B2920 with telescopic stabilizers. Where have people bought those recently? I read quite a few posts about the ones M Hodges made, but his web site...

Looking for a Snowblower for my B2920 Michigan.

I'm trying to hook up a third function valve to a Kubota B2920, and I'm trying to determine where the power beyond port is This is a picture I got off the net, not mine but same valve Here is...

I needed a fixed drawbar quick. The local Kubota dealer said he could get me one in three days for ~ $70. I needed one before then so went to TSC to see what they had. They had one that looked...

Recently my 3ph is not lowering until I move the lever to the bottom 'stop' (the fast lowering position). It won't lower at all at the first 'stop' (the "inch it down" position) It raises fine...

I've seen lots of posts about people having issues with B2x20 series hydro pedals sticking or not centering. Mine has been doing this since new, though not badly and when lubed it was fine...

My tractor started making a short grinding noise when I started it, got worse throughout the day as I stopped and started to the point of a click, grind and a quarter turn, now when I turn on the...

My tractor started making a short grinding noise when I started it, got worse throughout the day as I stopped and started to the point of a click, grind and a quarter turn, now when I turn on the...

My tractor started making a short grinding noise when I started it, got worse throughout the day as I stopped and started to the point of a click, grind and a quarter turn, now when I turn on the...

Hi, The other day my B2920's wouldn't start. The symptoms were clicking sounds, sounds as if some gear didn't fully engage, and the occasional attempt turn over. Suspecting the battery we...

I loaded the rear tires of the B2920 with rv/marine antifreeze and water this past weekend. I could tell a difference just driving it out of the carport. It just felt more solid/stable. With...

The tractor hasn't been cranked in 2 months. Lack of dry weather and opportunity just had not allowed me to get on it. I loaded the tires then was going to crank it up to let it warm up a little...

Good evening I have a B2920 with a FEL. Pretty much since the tractor was delivered bran new the hydraulic caps will not stay on the ends. This is turn cause hydraulic oil to leak down on to the...

Does this tractor have a transmission screen? If so, where is it?

this is a 2008 w/415 hrs. came with la364 loader, back hoe, rork rake and plow. Paid 18.000. Fair deal??

I bought a new B2920 w/FEL about 2 years ago. At the time I planned on getting it with the Kubota backhoe, but got talked out of it. I have regretted that decision ever since. What would it...

From the manual and what I can gather by searching here, this yellow dipstick in the picture (front axle) is just supposed to pull out. I have pried on it with a screwdriver. It just does not...

Just finished my plow set up - pick of a brand new (2003 vintage) Curtis 72 inch manual blade off of Craigslist (sat in a barn never used) - purchased new hydraulic cylinders and cross over...

This is my first tractor and I thought I knew how the 3pt hitch worked, but now I'm beginning to think I don't. When I use the rotary cutter, I lift the front of the deck up with the hand control...

I came across a good deal ($100) on an old 4 angle iron single row disc harrow. All I want it for is to rough up the ground a bit to plant grass or whatever for some small food plots. I tried it...

Here are some pictures of my B2920 with the new BX5455HD snowblower.

Hello guys I am posting this as a unpdate to a thread from last winter. I have a 2010 B2920 with only about 130 hours on it. Last winter I had noticed an odd sound during times of plowing snow...

I'm wondering if I can get the 48" bucket on a B2920 instead of the standard 50". The reason being that I want to be able to unload my pickup bed which is 48" between the wheel wells. How hard...

Just saw the video 4shorts put up about a full service on the Kubota bx. I noticed that he checked the HST strainer. Was wandering if the B2920 has this or not. I haven't seen anything about it...

Hello!New to the site. I'm looking at 2011 kubota b2920 HST with 140 hrs. Tractor has FEL, BH65 with thumb and 60" MMM. Price is $21,000. Like new condition. Would like to know if this is a...

Does anyone know the correct idle speed for this engine? I have googled and checked the manual and didn't see it. I use the tractor regularly but it only has 120 hours after 4 years. I never...

working in the woods and a sharp branch worked its way up and sliced my positive battery cable. It may have touched the frame - the motor shut off immediately and everything was dead. I put some...

I have a Kubota B2920. I am having an issue the the FEL only raising part way and to lower it i have to push the level the whole way to float. At the same time the 3 point hitch will not raise...

I have sold my B2620 and still have the Work Shop Manual that I purchased from my Kubota dealer new for $80+. Seeing I no longer need this I figured I would offer it here for sale for $50 plus...

Does anyone know the size of the transmission drain plug on the B2920? It came off while mowing along with all the hydraulic fluid and now the tractor will not move. I think I will have to retap...

Anyone know what my b2920 is worth? 535hrs Industrial tires Sims cab with heater No loader but harness for front mount plow/blower Thanks Sent from my iPhone 5s 64Gb using TractorByNet

Does anyone have the parts schematic for the b series mid mount mower? Specifically the linkage that connects to the 3pt hitch to the mower. Thanks

Thinking of getting a mmm for my b2920 and am looking at used a new. I don't mow a lot, so am leaning towards a used one. I'm not sure what models will fit the b2920. Anyone know if the 54"...

Ok. Here we go. I have it narrowed down to two tractors. First is a kubota b2920 hydro and fel 54 hrs. $12000. Next is a kubota b3030 hydro and fel 50 hrs. $13500. Which do I go with. The cu in...

Hi everybody! I'm preparing for a 200 hr service on my B2920. I did performed the 50 hr service with no problems at all. In fact it was much easier than expected. My question is, Kubota says...

I think I broke something on the mid mount mower on my B2920 Kubota. I took the mower off to do some bush hogging and I saw this bar bent down afterwards, its on the linkage for the mower but not...

I've been looking for a B2920 w/FEL for my daughter and son in law. Noticed a lot of low hour ones for sale. Why? Problems with them?

Hey guys Went to attach the mmm today, get it installed but the deck will not raise all the way, only a small amount. Took mmm back off, arms seem to raise and lower fine. Put mmm back in an...

After years of using either my finish mower or my scoop as a counterweight and not wanting to spend $275-$350 on a steel ballast box for my Kubota B7510, I decided to fabricate one for my 2013...

So The wheel is slipping in the tire, no air or rim guard is leaking.. how do I fix this?

Looking for a decent used Kubota tractor in the 30hp range, must be HST. Strong preference for 4 cylinder engine. No loader is preferred, but will consider. R4 tires best, then turf. 500 hours...

Don't ask how, but we own both of these Kubota models. We need to do the following chores: 1. Mow the lawn (using the BX2660 for this) 2. Drag a 70x110 indoor equine arena (have a 5.5', 400lb...

So I've been looking to get a slightly bigger tractor so I can run a 72" vs 60" mower without bogging down and have a few extra hp for anything else I might want to do. Here's the deal I'm...

I would like to get some suitcase weights for the B2920. The front of the tractor comes with the loader bracket. Can you attach the weights directly to this or is there another bracket you have...

I wanted to give some feedback on my Curtis Cab install. I finally unearthed a Curtis Cab off Craigslist - it only took 5 years as I have been looking since 2009 for a used one in like new...

Im looking to step up to the woods PRD8400 finish mower. It says the rating of the tractor needs to be 25-40HP. With the B2920 rated at 29HP do you think it could handle it mowing 5 flat acres of...

Siphoned 12 gallons of 0 degree Walmart windshield washer fluid from a 5-gallon bucket into each rear tire. Lifted the rear tires slightly with a floor jack and deflated them. The tires seemed...

Here's what I came up with for my B2920 for plowing snow. I bought a used 6.5 meyer moldboard off of craigslist. I made a mount to pin it to Kubota quick attach. I just use the lower pins...

Hey guys I posted on this a few weeks ago. I have continued to have an odd noise coming from the front of my tractor lately while plowing snow. It seems to be only when tractor is moving, never...

what is the experience between the 50 inch and 51 inch blowers, for $1000 extra is 51 inch that much better? Have 400+ feet of paved driveway and running out of space to put snow with loader.

I am in the immediate market for my first tractor. I recently bought a new house with 2.5 acres with about 1.75 acres to mow, a 1000ft paved driveway to maintain, and a lot of landscaping to do...

I have a B2920 with turf tires and I decided to get some chains for plowing and for work in the woods / on a steep hill in the snow. There is very little clearance on the inner front side of the...

Looking for b2920 with loader and 54" MMM. Have got cash quotes of $20,564 and $20,022 including taxes out the door. Do these seem like reasonable quotes. Thanks in advance for any help.

Received our 2" wheel spacers from Bro-Tek a few days ago and finished installing them on our B2920 Kubota this morning. As others have said, Richard at Bro-Tek was very easy to deal with and...

I haven't seen a lot about how to change the fuel filter for the B2920. It seems to be one that would require a little more skill since you might have to bleed the fuel line afterwards. The...

Being on the West Coast of Canada, my options for purchasing implements are limited. The main regional supplier sells two brands of light duty flail mower, Caroni (Italian) and AGRIEase (Chinese...

Took this an hour ago. Fresh snowfall overnight; good test for the new blower. All I can say is WOW!! http://youtu.be/Lf0whm0B_3Q

I changed the hydro oil and filters. Added 15L of super UDT ran it at 2000RPM for a few minutes and shut down. Next day checked cold. Way over full!! Ran again and drove it around the yard...

Anyone know how to loosen or take off the hose clamps on the radiator hose on the top. What tool would be right for this? Also would it be hard to reconnect the clamps on the hoses if taken off?

I will start by introducing myself. I am Casey, and in my 20s, and ready to buy a new tractor to last my lifetime. I am heavy into the old Farmall tractors and have a Farmall Cub, and three...

I'm in the market for a used 3 pt blower, but came across a B-2660 front mount blower. I'm having trouble finding what tractors it fits. Anyone know if it will fit a B series, or can be modified...

There is a plastic rectangular piece located on the right fender behind the 3 p.t lifting and lowering control. It basically looks like there could be a cup holder there like there is on the left...

Price check for a B2920 do these prices seem high or about right for the northeast? I have talked to several dealers and they are all with in a few hundred dollars of each other on price. Some...

Was quoted $16,500 OTD for a B2920 with FEL. That includes the 0% financing for 60 months and 0% down (free money!). That sound like a decent price? Was also considering the Kioti CK30HST, but I...

I'm in the process of looking for a good all around tractor. I'm trying to close the gap and make my decision. I would like to have a tractor by the end of the month. I need a tractor to Snow...

Is the B26 TLB much bigger and better than a B2920 TLB ? It is hard to judge by just looking at a picture . The B26 has 800 hrs and was a rental unit . The B2920 has 600 hrs .

Hey guys Need help with a dumb question. B2920 has run like a champ since I had it. Only 115 hours on it. I ran it for an hour or so yesterday not problem. I then hosed off the dirt and gravel...

Can you put a trailer ball directly onto the drawbar of the b2920? Have seen other ways of doing this that use some kind of adaption to use the 3 pt. Is it better to get a adaption that uses the...

Searched around and found some ideas/photos. Seems that CJ mirrors are the most popular option, but some have commented that they shake/vibrate. Anyone added mirrors which they are very happy...

I am new to compact tractors so was hoping someone knew the answer to this. I am able to change from High, medium, low without depressing the clutch although the owner's manual says to depress...

Had a great summer with my new B2920. Thanks again for all the help leading up to my decision to purchase a new tractor. Just about ready to do 50 hour service a couple of quick questions 1...

I was wondering if anyone ever estimated the pulling force of their tractor. I'm trying to size some rope / chain / cable for pulling trees (i.e. putting pressure on them as they are cut to get...

Tried to buy these at the Huntsville Kubota dealer the other day but could not find anyone "working" there who knew what they were or what they cost. After about 20 minutes of discussion among 3...

I have been focusing on clearing the rear of my new construction house and planting the yard back there but got sick of looking at this weed patch out front today. Think clay baked dry in slabs...

I have a B2920 and it feels tipsy even on a slight incline. I checked with Kubota about rear wheel spacers and was told they are not recommended because they may interfere with the 60" MMM deck...

Posted in wrong section earlier. Looking for a kubota b2920.

looking for the above listed Kubota B2920. If you or someone is selling or looking to get rid of please post some info. Thanks

Hey guys Need some opinions on price on a used B2920. I purchased this tractor in 2010 new. It has FEL, MMM, Woods box blade on it. It has 100 hours on it and is in fantastic condition. All...

I traded in my bx2660 for a b2920. The transmission vibrates and rattles a lot more than my bx. Anyone else find the b2920 hydro rough compared to a bx? The fluid levels are fine. I havent talked...

Have the chance to buy a like new (never used) 60" deck for a b2920. $1800 Canadian funds Good price or pass? Thanks

Order this add-on tooth bar from Stella (she was very helpful) at North American Implements a few months ago. I have found it very useful while digging with the fel. Its also very helpful in...

Have a chance at a good used la504fl Could this made to fit a b2920? Thanks

Have a chance at a good used la504fl Could this made to fit a b2920? Thanks

I believe the B2620 replaced the B7610. Are the bolt patterns for the rims the same between the two models? I'm looking for some used rims to try out some different tires.

Anyone checked into this? I'm just curious, as it looks like the new BX seat would be more comfortable and supportive, especially with the arm rests.

Does anybody use the sub compact Rotary cutter from TSC? It's a cat. 1 so I assume it will fit my B2920? Looks better built that the other 4 footer they sell? Os would i be better off with the...

What started out as a search for R4's to replace my turf tires turned into trading in my 2005 B7510 w/FEL with 400hrs for a new B2920 w/FEL. I've actually been contemplating the upgrade for 3...

Thought I would start a thread for B2920 owners, here's my opening salvo at the 15 hour mark! 1. No backhoe required I pushed this over with the FEL then got under it with the FEL teeth and...

I want to get a grapple for my 1.5 year old, 300 hours Kubota B2920. I have made a tentative plan and would like to have it checked. I'm hoping for and am open to all comments, advice...

I'm looking at trading in my very clean 2005 Kubota B7510HSD w/FEL 400 hours for a new B2920HSD with LA364 FEL and would like to know if this is a decent deal. Its always tough on a trade in as...

I am picking up a "new to me" Kubota B2320 tomorrow morning. It only has 30 hours. It does not have a mid mount mower and I was wondering if anyone has an idea of what it should cost to have one...

Just had a thought for adding a rear remote but not sure if it will work. I have a valve off of an old stone picker that works to change the flow from one cylinder to another using a single remote...

I had seen a post somewhere about the reverse pedal being a little awkward on the B2920. When I traded my BX2660 for a new B2920 TLB, it was awkward for me. I kept hitting the front loader lock in...

How far can you lean one of these sideways before it tips over? You sit so high up even a marginal side slope seems dicey. I spent a lot of time jogging around today trying to keep it flat on...

What started out as replacing my 2005 B7510 turf tires with R4's has now turned into a possible trade in for a new B2920. I've gotten over the first hurdle which was to convince my wife that it...

I hacked the first big bush down to size and went at it today with the BH65. This thing was about 20' tall, that's the debris pile off to the left. Branches up to about 3.5" in diameter. I started...

Hey guys I decided to change the oil on my Kubota B2920 the other day. I had the original 50 hour service done at the dealer but decided to begin to do some of this myself. I am relatively new...

So I pulled the brand new B2920 into the garage tonight after about 5 minutes practicing with the FEL, I have about 8 minutes of actual use on the tractor so far. I pulled in stopped and this nut...

My first ever new tractor day, awesome! I took some detailed pictures for anyone else who might be considering this tractor, enjoy!

I traded my BX2660 in on a new B2920 TLB so I had the backhoe for some home projects. I took the backhoe off for the first time a couple weeks ago. I have about 8 hrs on it now. When I started to...

I'm getting a little older and my hip doen't move as it once did. Has anyone ever installed a step on a B2920? Kubota doesn't offer one for this model. Has anyone every used a step from a...

I did a deal this afternoon on a new B2920, ETA Friday whoohoo! I got the loader, BH65 with mech thumb, 16" bucket, street shoes, 60" MMM, beat juice in the rears. Thanks for all the input from...

Well I moved my nissan forklift down to the farm so we could use it to load stuff in the barn. I didn't want to bring it back to my house for the basic stuff I do here in town so I decided it was...

Bought a new B2920 w/R4 tires, FEL, 4' bush hog and 5' finish mower last Fall. It's my first tractor and I've been very happy with it. I mainly use it to mow our 2 acre yard and to clear and...

After lurking here for some time and visiting just about every tractor dealer within a 100 mile radius of my house, I finally decided to pull the trigger on a new B2920 from Barlow's outfitted as...

I brought a new B2920 this fall and love this machine. My first tractor with a FEL and I moved tons of gravel repairing my 600' driveway. Looking forward to using the MMM this spring. My problem...

Hi guys, warm weather here today so I thought I would start my B2920 that I haven't run for a month or so to warm it up and charge the battery. Anyway the fuel was getting pretty low, all of a...

I put the HST in "N" and then set the brake and when I rise off the seat the engine stalls. I want to get off the tractor to put on a chain on a log or change the direction of my rake on the...

How noticeable is the difference in power when going up. Have the 2320 and like so many before the needs didn't quite match what I thought when purchased almost 2 years ago. Initially thought...

We just purchased a B2920 for my wife (I have a NH TC45DA). The question I have is there any safety interlocks on the B2920 that must be engaged before you can start it. I went to the dealer and...

There is 3hp differance motor and PTO on these two tractors, is it a noticable differance when finish mowing and snow blowing? I know everyone says go bigger but its around 2500-3000 differance at...

The good news - been tractor shopping and have the green light from the other half. The problem if you want to call it one - a big price difference. The Bota's are from a local dealer who has been...

Just received our new B2920, and while looking through the parts manual and WSM, I see that the B2320 narrow has a straight pipe that does not go into the loader valve body. Does anybody know...

Is there a float function when using the quick hitch and front blade on a b2920? If so how do you activate this? I can lift the front wheels off the ground and it digs into the black top (yes I...

Is there a float function when using the quick hitch and front blade on a b2920? If so how do you activate this? I can lift the front wheels off the ground and it digs into the black top (yes I...

Had a great weekend cleaning up the farm about 5 hrs from where we live. I had the L45 and my cousin who volunteered his services had a B 2920. It amazed me what a work horse his B2920 was. He was...

I was looking at a B2920 and was told that it was a poor seller, and probably not a good buy. Spare parts scarce and so forth.... What does TBN think.... I am in Central Florida and was looking...

Does anyone know if I can mount the la364fl while not having to totally remove my front mount quick hitch for blower/blade? Did a quick search but no immediate threads covering my query! Thanks

Hello all! Just finally decided to register after over a year and a half of "researching" on the forum. First I would like to thank everyone who has posted in this forum. Your posts helped me...

Hi folks ,I'm new to this forum and have been searching for the right tractor for me for about 6 months now checking pricing, options capacities etc. on various makes of tractors. John Deere...

I just purchased a Kubota B2920 tractor. How do I establish a 12V plugin connection for my sprayer attachment?

Other than the cost of the backhoe, are there any other reasons I should not get a BH on the B2920 I'm buying? I know they are some trouble to install/uninstall, but I will normally be doing that...

Im in the process of buying a b2920 with a 48" scraper box. I'm looking at the bb05, bb12 and bb15. It will mainly be used on very rough forest roads. Any suggestion on which one I need?

Hello, I know that tractor width should be taken into consideration when choosing rear implements. Should a 50" wide tractor use a 60" or 72" rear attachment such as a blade or tine rake? I'm...

B2920 - Newbie Planned Purchase Help I guess I am in the market for my first tractor. Been lurking on this forum for several months and have learned a lot of things that I had not even...

I have been noticing this off and on annoyance over the last couple weeks, where the HST pedal occasionally won't go into forward or reverse unless I really stomp it. I lubed everything really...

Guys, Im kinda torn between a Kubota B2920 with an FEL and MMM or a Mahindra Max 28XL HST with FEL and MMM. I was leaning Mahindra but the only thing holding me back is the mid mount mower. The...

What does everyone think? I know the Max 28 is new as of this year and just hitting the marketplace... I priced out a Max 28 XL TLB and it comes in at $20,000 through my local dealer. A B2920...

Hey Guys, Well, I'm VERY close to pulling the trigger on a brand new B2920 with FEL, BH, and 3PH. The dealer that I have been working with (local) has extended what seems to be a great price on...

I'm looking to rent a rotary cutter for my B2920. The rental place only has a Woods BB72X, which has a 72" cutting width and recommended tractor HP of 30-50 HP. I've heard 5hp for every foot of...

What have people payed recently in ME and NH? I'm looking at the 2920 now, but would be interested in other B series. I've been quoted 16,700, 16,800, and 16,900 at two Maine and one NH dealer...

I have new B2920 with 60" mmm. Just putting on tractor to mow this week and cannot get it level. Now manual says to have front link pivot pins on turnbuckles to front pivot arm at 19.9", Lower...

I was quoted the Massey 1526 with a front end loader and 60 inch mmm for $21000. The kubota 2920 with the same came in at $19200. Both have 5 years 0% financing. I have 9 acres 2 of which will...

I am not sure what happened to my B2920 today, but good grief it was like it was on steroids or something! I was digging up stumps most of the day and it was just doing it with ease. Maybe it was...

I have been clearing trees and stuff for a garden, it is going pretty well. However, after I get the stumps up, there are still plenty of roots all over the place:mad: I am not sure the best tool...

B2920 with bar turfs on rear. Using around the yard moving things, dragging and sweeping up dead debris noticed the bar turfs would slip once in awhile with loader on. Take in mind loader will be...

Does anyone know or have used the bxpanded pressure tester on a B2920? I would think they are all the same, but perhaps not.

I used my new B2920 with quick hitch moving trailers, boats and putting snowblower away in back of shed. Did quite a bit with 3 point and either mine is setup perfectly or that is how they work...

When buying my tractor one of the 'jobs' I was hoping I could do with it was to move large trailers around my yard, the biggest being my boat. I store it in a very tight spot by the garage where...

Called and stopped at two dealers in TN. $15,990 and $16,100 for a Kubota B2920, 60" belly mower but no front loader. Based on what I have seen from other posts this seems high but maybe the...

I know when the mmm is attached that you can pin it in the up position with bracket on mmm when using the 3 point to keep it up. My question is when mmm is off the brackets are still there and...

I have been googling for a softcab and seems that they are about 1500 - 1600.00 but seem to be designed well. Does anyone know of another softcab that would be little less money but still good...

I have the new B2920 about 4 hours on from blowing snow last week to clean up Blizzard. Question is low sulfur hwy fuel. I live in midwest and can buy ag fuel no problem vs hwy diesel which is...

My FEL manual says to grease the control lever when I grease the pivot points on the loader every 10 hours. I couldn't see a fitting or an effective way to grease the lever, unless I am missing...

I have a new b2920 only about six hours on it. I tend to keep it in medium range. Yesterday I went to go down the driveway for the first time and wow was it slow going up hills. It seemed to be...

OK have my new B29020 and kept the 55w flood off old tractor to put on this one. Is there wires in rear that run off light switch that I can just plug into and where are they located?

Finally dropped off New Holland TZ25da, said my good byes and loaded up new B2920. Dealer came through big time. On agreed price for standard B2920, FEL, 60" MMM and standard turfs came away with...

:confused:I orderd new B2920 requested standard turfs and ended up coming with the bar turfs. Now my question standard turfs/r4'S are 23" front and 33" rear wheras bar turfs are 22" front and 31"...

Here is a pic the tractor with bx2760a blade with hydraulic angle and skid shoe kit

I have been reading threads about chippers and trying to decide what to get for my b2920. I've got a lot of hardwood with big branches at right angles all over the place, so wanted something that...

I got a new trailer hitch setup today that connects to the 3 point hitch arms. In trying to set it up I realized that I can't figure out how to get the 3 point lower arms mounted to the tractor...

I had to use the B2920 I purchased late last fall for the first real task yesterday. We had to put down an aging and sick pet, so I had to dig it's final resting place. I could tell a really big...

I've just recently bought a Kubota B2920 and want to get a PTO wood chipper for it. I've done a lot of searching and haven't found a ton of information. I'm wondering if anyone is running this...

Ordered B2920 should be here in month. One question I have is is there a reasonable/economical cab for this unit for winter work just to keep the cold wind and snow off me. I would want to take on...

Posted this in the general pricing discussion, but thought i might get more feedback here. I'm wondering what folks think is a fair price on a lightly used 2920 with a fel and bh65 backhoe. Im...

I'm wondering what folks think is a fair price on a lightly used 2920 with a fel and bh65 backhoe. Im looking at 3 right now, all are '09 or newer with under 100 hrs. List prices are from 19900 -...

I had opportunity to purchase a 2011 Kubota B2920 which dealer stated was new for a certain price but had 24 hours on it but quoted me new price for it. I requested a new one with 0 hours and they...

Decided on Turf for my Kubota B2920 now they offer two sizes to make more decisions on like I said 60% mowing 40% blowing/pushing snow, loader work and garden tilling Kubota offers FRONT - 22.0 x...

Let me add yet another work light thread... See attached pics. I got two 1000 lumen LED lights, Soundoff Signal brand. Very nice lights, cost about $100 each with shipping. Each draws 1.4 amps...

I don't know if this is operator error or I have a problem. I have a 1 year old Kubota B2920. When I use the control lever to lift the FEL it will only go up 1/2 way. In order to make it drop I...

I was coming across "thumb controls". Is this a hand operated lever or switch option of somesort to run the hydro as option vs the foot pedals which where located on the B2920 eliminates the use...

Anyone have a used hitch and blade for a B2920 they want to sell or either or? Thank you.

I am planning/leaning toward a B2920 but would like to question the 1/4" positioning. I have a metorite 51" 3 pt snowblower, woods 52" tiller and woods 5' scraper blade which is why I am leaning...

I have opportunity to trade the New Holland TZ25DA wit 60" mmm, 48" quicktach loader on either a B2920 or B3200. Last winter blowing snow told wife could use another 5 hp under the hood. Have...

Can't seem to find a place to do this. Is there a good place to mount a toolbox/chain box on a b-series?

Already considering a three-point quick hitch. Any recommendations? Thanks.

I have a B2920 and there is a small piece of metal sticking out the back that has a vertical hole in it. I figure this is where the Clevis goes. The bar is 1.25" thick. I can't find a Clevis with...

Here it is! I'm very excited and also a little intimidated. I've never had a tractor so I'm taking it slow. It's already very obvious what I don't know... Got the B2920 with FEL, 4' Bush Hog...

I warm up engine aprox 5 minutes ,(at idle)and then mouve it out of garage and run it at fast idle aprox 1 minute , then drive around back to start working and i notice even after running for...

Just got delivered today, along with a unbelievably stout Howse box blade. Real nice setup. I really thought hard about which tractor to get, and almost went up to the B3200. But it felt too...

Anybody use a brush grubbed with a compact? What kind of results can I expect? Thanks.

So I have been reading over my B2920 manuals, and checking things over before I actually start to use it. This is going to sound outright crazy, but it has me stumped. Standing in front of the...

I recently bought a B2920 Kubota tractor that is rated 29-30 hp with 21 hp at the pto. I already have a good 60in. King Kutter rototiller that weighs 690 lbs, and is rated for tractors of 25-40...

I pulled the trigger on a new B2920, with FEL and BH. I will miss the BX25 but Barlows helped me with good prices. I will post pics once it arrives, in about two weeks.

I have searched the forums, and have found where many opt for an upgraded alternator on the B2920. Does anyone have an idea on the part number, or how much it costs to have it installed?

What would be the best fit for this size of tractor and what's the average price for a good quality brush hog?

New to this site so hopefully I am posting this correctly. I am trying to decide on which Kubota tractor to buy. I have very little tractor experience. I have a cabin in the mountains on a 1...

WOOOOO,,,,,HOOOOO,,,,,,boy I wish I had pictures, it took me 10 min to do what it use to take a minimum of 40 minutes with the bucket.

Wondering if the B2x20 series has enough lift on the 3pt to use full size implements like PHDs and moldboard plows, or do they still require the low profile/junior versions. Ian

How well does this attachment really work? Or am I going to have to trade up for a bigger machine? What I would like this attachment to do is dig out stumps, holes for new trees, ditches and some...

I own a 2010 kubota b2920 and am considering to purchase a backhoe for my tractor. I have run plenty of commercial equipment and what I really want to know is in real life how tough is this...

Ok I'm very close in pulling the trigger on a tractor. So here's my dilemma. I have 2.5 acres that I mow and have light front loader work around the place. I'll be building a storage barn next...

First time buyer B2920 with Fel and 60" mid mount mower quoted at 17999

I didnt like how the factory rear hyd valve from Kubota was supposed to be mounted on the ROPS for the Kubota B2920. After mounting on the rops, it blocks a significant amount of viewing angle...

Needing weight in the front with the loader on, and need to be able to use the loader,,,,how much weight would filling the fronts with RV antifreeze? Does RV antifreeze weigh any less than the...

AM looking for a good used unit Doesn't need to be immaculate I am willing to put in time and money to refurbish! Price is more important than condition

I want to buy a utility trailer for my B2920. The trailer needs to accomodate a load of 3,500+ lbs (tractor, plus BH and FEL). Any suggestions would be greatly appreciaed. I live in NW...

Can I go with a 6' or would that be too much weight

Hi king about putting hyd top and tilt on my 2920,,,,,has anyone done it?,,,and how much was the valves?,,is it something I could do myself or should I let the dealer

Hello I have a B2920, 2010,,I do not have a backhoe ,,, when I spec'd the tractor I knew I wasn't ordering a hoe, so I never even asked any questions, knowing that it would fit if needed was...

Hi, was wondering what size trailer I would need to haul my B2920. It is completer with backhoe and front bucket. And info would be real helpful

I traded my BX2200 for a B2920 Coming on Monday!

Hi, As I stated in a earlier thread, I felt I was just about at my financial limit with the B2920HST with FEL and 60"MMM. After a review of the B3200 price, I may be able to swing the extra for...

I was cutting the grass and was almost done when i noticed slight vibration ,i thought one of the blades was loose so I stopped the tractor and checked the blades all was good i then lifted the...

I was wondering what the tire pressure was for the front and rear of a b2920 (turf tires ) if different.(i'm waiting for manual for tractor) dealer lost it. thanks

Does anyone own a b2920 with r3 tires(turf)and can you check to see what size tires front and rear you have that were on the tractor when new from kubota,and the manufacture of the tires,i think i...

The transmission on my new B2920 is starting to worry me a little bit. It's making a loud creaking type noise when going up slight inclines or working with the box blade. It's in low range, 4wd...

Hi Guys. In February I traded my BX 2350 for a B2920. The 2920 came with a backhoe, mmm and FEL. I just took off the backhoe and reconnected the hydraulic line to the tractor. I took off the...

Hi i'm looking to buy a new b series tractor ,I tried a new demo unit b2920 last night and realy liked it ,I have a bx25 now and wanted something with more ground clearance then the bx 25,the...

Hello guys Well I have read every thing every where on Kubota and think I would like a B2920 with FEL and a BH,R-4, mid PTO, need to fill in a 1/4 a. pond and dig 200 yards of dich, my land is a...

Out with the old BX2360 in with the new B2920! My BX2360 will be missed. A great machine. I already put it to work. Those barrels must weigh at least 15 lbs each. I needed to move them down to...

TSC in my area has their CountyLine Multi-fit post hole digger power unit, Stk. No. 2100220 for compact cat. 1 & 2 on sale for $50 off. I don't dig many holes so I figured it fits my needs at a...

TSC in my area has their County Line Multi-Fit post hole digger power unit Stk. No. 2100220 on sale at $50.00 of normal price which says it's for compact, catagory 1 & 2. Since I don't dig many...

Now all I want is winter to go away so I can get to work:)

Hi, new to the forum. I have a new B2920 that I just performed my 50 hour service. Just a few questions as the manual doesnt quite explain it well. First of all .....why 2 drain plugs for the...

My B2920 was delivered today and I put a couple of hours on it. I got the quick attach for the bucket and a set of pallet forks as well as the 60" MMM and a rear work light. I took the mower off...

I had purchased a B2920 with a 60" MMM but I held off a little bit unsure about my real needs. Dealer has been very understanding and has not pressured me at all with anything. They have even...

Just got back from placing my order for a B2920 with FEL and Landpride RCR1248 RM. Looked long and hard and this machine made the most sense for my needs and budget. Paid $17,325 with loaded...

Is the position control feature in the L series worth the price bump from the B2920? Using the machine to mow and move stuff around on 11 acres with some hills. I also see the B2630 has the...

I'm being offered a used (23 hrs) B2920 (first sold Nov 2009) with loader for my BX2230 (150 hrs) w/loader + $4600. That's the bottom line deal. Both HST. Good deal or walk away? Thanks!

Being offered a used (23 hrs) B2920 (first sold Nov 2009) with loader for my BX2230 (150 hrs) w/loader + $4600. That's the bottom line deal. Good deal or walk away? Thanks!

Got this quote from my local dealer. Look good? B2920 $13,600 (list $15,039) LA364 Loader $2,900 (list $3,174) 60" MMM $2,450 (list $2,500) I'm also going with the QA and pallet forks (full...

Looking to take the plunge and buy new. Need to rough cut about 4 acres of hilly field. Also want to be able to move some split firewood from time to time and clean up a little after the plow goes...

Hey folks. I am a new poster but have been reading posts here for a long time. I have a question that I hope you can help with. I just traded my BX 2350 in for a B 2920. One of the main...

gentelman, can a b2920 handle a 63in blower or do you have to go with 51 in. high cap. blower? one dealer said yes and the other said no. cant get a b3000 for 3 months so i was considering the...

Does anybody know of a skid plate kit available for the underside of the b series tractor? Contacted bro-tek but no kits available yet I like the design for the bx series Has anyone built their...

started pricing the JD 2520 because of the quick change bucket (FEL) and other quick attach implements, tractor with R4, 62" MMM, 200CX loader is $18,500 (before any taxes). Then of course I had...

I thought I saw this sometime back, but can't find the thread. I'd like a set of forks for my 2920, but not the clamp/chain/bucket type. I thought I'd read where the forks from a larger model...

looked at b2920 today. started it up and ran the fel. seems well built but i shut it off and holy cow my whole body was still viberating after i got off it.:confused:was priced at $22500, with...

Well it was only a matter of time - the title says it all - I have decided that my next attatchment purchase (a core aerator) is now on hold. Since I would only use something like this twice /...

I just bought a set of 2 link chains for my tractor's rear tires (turfs) from tirechain.com. I was planning to install them as a weekend project, but after placing them on the tire to check the...

Well, I mentioned in another thread that I'd outline the reasons why I traded my B2920 Kubota in for a Deere 2320. And at the risk of criticism, I'm writing this up to save someone in my position...

My alternator light on the instrument panel is always on. Battery voltage when tractor is running is 14.6 volts, so I know my alternator/dyno (whatever it is) is charging. Tightened the belt to...

I was quoted 16,000 for a new Kubota b2920 w/ loader. Another $2k for the midmount mower. Thoughts?

Newbie here with a brand new tractor... the temp outside was 36 degrees and I was moving firewood from the backyard to the house. I watched the temperature gauge and noticed that it only moved a...

I used my Kubota front plow for the first time today and it does not seem to go low enough. I read the manual and looked it over but I don't see any way to make it lower. has anyone run into...

Hello to the group, this is my first post. I will be pulling the trigger next week on a new tractor. I have done a lot of reading and comparing stats. It痴 down to two tractors?D 2520 and Kubota...

Well, first, thanks to everyone that weighed in on the plow v. rear blower question... I'm still pretty unsure of what to do. In fact, I've realized I have 5 - yes, 5 - viable options, in order...

This has happened twice now within 2 weeks. The tractor will be running normally, and then I'll get up out of the seat (something I'd already done numerous times before) and as my weight comes...

I am going to purchase a car hauler or utility trailer when I can find the right deal. Kubota.com shows the tractor at 1390 without loader or backhoe. I think I read that the BH65 weighs 1400 lbs...

This is probably pretty basic. Although I have become somewhat skilled with tools I have never gotten into the wiring side of things. My tractor has a rear light installed. When I bought a 12v...

Does anybody have the B2920 Front Snow/Dirt Blade? If so how do you like it? Never even seen one Just on Kubota wedsite. How much are they? Thanks:drool::drool:

This is a repost from the oil and lube forum.....:o I hope someone here can help me....I'm in the middle of servicing my Kubota B2920 and can't find the Trans strainer???? I don't think it has...

I hope someone can help me....I'm in the middle of servicing my Kubota B2920 and can't find the Trans strainer???? I don't think it has one.:confused: Its not even mentioned in my owners manual...

I have a B2920 that may need to be transported 2 miles away infrequently. My wife's truck (2007 Lexus LX470) can easily tow this amount. I am thinking of a 16 or 18ft tandem axle landscape...

hi,i am new to tractorbynet,i am from western pa and have been looking for a versitile tractor for sometime now. and i recently seen a ad about a ls 3010 tractor with loader for $13288.00 i was...

With the price of aerators / pluggers I want to be sure I make the best choice - hence looking for feedback. I am looking to purchase a 3 pt core aerator soon and was wondering if anyone has an...

First off, I wanted to thank all the posters on this board, it really helps to get feedback from people that own the equipment. I think I've followed the same path as many on this board, looking...

:confused2:Bought a large rectangular Blazer magnetic base Work Light at TSC for my B2920. I wanted it for mowing at night with my 60" MMM. I like to see the grass line on the right side real well...

I was following another thread about the hassle on mounting a BH on a Kubota. I had bought a B2920 last April with the BH but didn't ask the dealer to deliver it (the hoe) until this week (just...

I'm looking at a B2620 or B2920 with a BH , ROPS and FEL. I am now getting ready to modify a building for a shop and garage, but unsure how high the door opening needs to be so the tractor can be...

I know from another post it holds a lot more than 3.7 quarts of oil. Any other tips? oil and filter change, hydro filter change and adjust clutch pedal? I did not see anything about a magnet for...

Hello all, I'm new to the group and need some help. my question, is there any differences from the o8 and 10 year b 2920. I have a chance to buy a o8 that was a harvest rental and has 45 hours...

Hello, I bought my Kubota B2920 FEL used...just with the FEL. I think I need to make a decision between hooking upto to the existing hydraulics and buying a PTO driven pump. I'm looking to put a...

I am very limited on where it can be dumped because of an asphalt driveway. 5y will only need to go 20 feet or so and the other 10 will need to go about 200 feet. thanks

I'd like a plow to use occasionally for the small garden I have, put in a food plot, and random lawn renovation. My owner's manual suggests a 1 bottom (14") plow, but the only used ones that show...

Just realized there are two engine oil fill spots on my B2920 why?:confused2:

I have been looking to replace my old 1958 Massey Ferg TO-35 with something new. Along with my Massey I have a 60 inch King Kutter II tiller, a six foot rear blade and a middle buster plow. I...

I just put these on and it makes the tractor feel MUCH more stable. I would highly recommend them. In the pic below the spacer is installed on the left side.

I have finalized my purchase decision on a new tractor to either a B3200 or the B2920/B2620. I have about 6 acres, the majority of which is wooded. I will be establishing trails, doing a lot of...

I've had my B7510 with a FEL for 5 years, is excellent condition and has 255 hours on it. However, I'm looking for a bit more power and am considering the B2920 with a LA364 FEL and R4s. I stopped...

this thing is a beast!

Just got back from the Kubota dealer. I put my L245Dt on the front lawn for sale and it lasted 1 day. I have 5 acres in the desert and 1 in the mountains. Like the Mid-mount PTO on the B2920...

Does anyone know the speed range of medium gear for the B2920?

I posted a while back that according to the specs there is not a big difference in capacities (loader etc) between the two. After using it for a full day the difference seems pretty big. Here are...