The engine was running fine then one morning it stopped running. Initial inspection on my part indicated an injector pump problem. The dealership said that the injector pump should not have...
Like the title says, water in fuel caused me a $10,000 repair bill to my 2017 Grand L6060 with about 1200 hours on it. The water caused rust in the fuel rail which caused damage to the injectors...
My third Kubota and most likely my last tractor. I retired from farming last fall and been down sizing. Looked at JD and Yanmar in detail with some thoughts on LS and a glance at Kioti. For my...
I'm in the process of trading my 2018 L6060 open station tractor for an L6060 with cab. I'm not getting any younger and the hours of plowing & cindering my 1.25 mile private road in single digit...
When I first got the L6060 I was impressed at how quiet the engine was, almost as quiet as my F350 6.7l. However as time goes by the engine is getting louder and louder. Initially the engine ran...
I am considering replacing my 2012 JD 4720 Cab machine with a stronger, heftier tractor. I'm pulling my grain drill more and more and the JD is at the upper limit of it's capabilities with that...
Ever since I got the L6060 I've noticed it was hard starting in cold weather, even after the block heater has been plugged in all night. Last year I called the dealer and told him of the issue and...
I was reading another thread where a person was complaining about the regen frequency of his YT tractor and based on the comments I seen I may be having an issue with mine. When I first got it I...
In the Market and local dealer told me the M6060 Cab is cheaper than the L6060. Is this primarily related to the HST vs 8spd hydro shuttle? M6060 is 1000 lbs heavier, has a pair or remotes...
Bought an L6060 last December and now has 53hrs. Started noticing the odd oil spot on my garage floor at 30ish hours yup it's leaking transmission fluid from the weep hole because a $20 seal...
Hey all,
I just took delivery on a shiny new L6060 (woo!). While most of my implements are back ordered into oblivion, I at least got my hydraulic rear blade to play with. When I started using it...
Hello,
After this winter with record snowfalls and it being near impossible to find anyone in our area that wasn't too busy to clear our driveway of snow, me and the wife are considering getting...
My L6060 has 82 hours on it now. My son in law was using it and said it ran out of fuel. It was low, but not empty. We added fuel and it ran fine for about 20 minutes then seemed to be starving...
Ok......I've got some great opinions from some here on TBN. I have decided on The Grand L series for my first tractor and am ready to buy this week. The question is, Do I wait for the new L6060...
I just sold my L5740 and am ready to purchase a new tractor. I'm looking at an L6060 for primarily pallet fork work lifting sawlogs/cut lumber and some light dirt work. It'll also be used for...
so.....down to a final decision and would LOVE input from the experts here that have been where I am.....which one is the right one (yup and at the end of the day, I will have to make my own...
Well I finished making a guard for the 3rd function hydraulics and here are some pics. The first pic color is wrong, not sure what happened there.
After installing this I realized it may not be...
Gentlemen,
What do you think of the following pricing?
Kubota Grand L6060 Cab HST $40,900
Third Function Plumbing on tractor is another $800
1055 Loader with manual quick attach $6800 w/HD...
I'm wanting your true thoughts. Is the Kubota worth the extra money? I like it more but we are looking at about 8.000 more than the Mahindra. Both are Cab tractors with loader.
I have an L6060 already ordered and being assembled by my local dealer, who called to inform me they forgot to add a part needed to operate the mid-mount PTO. The claim there is a $250 gear that...
The kubota dealership wanted over $900 for a set of front fenders so i made my own out of a $40 trailer fender and some leftover steel. Ive got to pick up some small mudflaps still and im not sure...
Well I just moved forward with the purchase of an L6060. A lot of help / info came from perusing this forum. It came down to the L6060 or the MX6000 / 5400. Either would have been a major...
I've read a few threads on the topic and looks like there are almost as many opinions as there are owners. I read the owners manual and see the statements about not operating the tractor at full...
I've been running an mx5100 for 5 years. It's been a great tractor. But I need just a bit more pto hp to run my airblast sprayer in the orchard. The 5100 runs it until I start up a hill and then...
I own a Massey GC1710. Very pleased with it. Have 45 hours on it now at a 2 acre property.
For another property, about 90 acres, doing mowing and clearing logs and brush, I had settled on a...
Hi folks,
Unfortunately my local Kubota sales team is a lot more eager to sell what they can get than what I will need, so I want to get some external opinions.
I just moved on to a >150 acre...
Looking into purchasing a new L6060. Also considering a 4720...but the design is very dated and the cab is cramped at best. My questions on the L6060:
-Installation of Trimble Autopilot/FMX -...
Hi all,
Ordering a 3-pt power pack for my L6060 to run a few skid steer attachments...
Getting a 25gal, 21.2gpm unit from Green Hoe.
1. Does anyone have experience with this unit or company?
2...
Sorry if this is a repeat, but I searched and couldn't find anything addressing this question specifically. I have been considering a new Kubota to replace my well loved, faithful 2001 L4300 and...
Recently I noticed that when driving in a straight line, with a slight cross slope, I am constantly correcting to the left. In a fairly short distance I end up with the steering wheel 1/2 a turn...
We’re new to this forum as new Kubota owners! Have traded in 2 green tractors on an M5 and L6060.
Just got my L6060 a month ago. Ordered the cloth air ride seat option and I’ve never been so...
Any practical tips for removing a loaded rear wheel off a L4760 with R1 tires?
Im concerned the tread lugs will make the rolling of it out of the way be very wobbly and prone to falling.
Was quoted a L6060HST with 3rd function valve, LA1055 with QA 72" Round Bucket, BH92 with QA 18" bucket for $44,985.00 from another dealer. Reasonable?
My current dealer just dropped an L47 off...
Decided the factory lights on the L6060 I just purchased weren't cutting it. Ending up removing the 4 factory lights and replaced with a couple of led light bars.
For the rear I installed the...
So I am seriously considering these two tractors. Grand L, Cab, Hst, etc.
My delema is this, do I jump for the 60 HP for the higher PTO HP?
My needs are, snow plowing, drive way manitence...
My dealer delivered my new L6060 ROPS today and hauled away my 2007 MF 533.
I've never before traded a tractor but could not wait to get rid of my both of my Massey Fergusons (larger 2012, MF...
Just wanted to show off my new Kubota L6060. It was delivered Wednesday which was followed by 2 days of constant rain. While the rain prevented me from getting things done with the tractor, it...
I visited Lano Equipment today to look at and listen to the L6060.
Priced out with a 1055 loader, an HD 72" bucket with a replaceable bar, swivel air seat, 3 spool valves, draft control, mid...
Just picked up my new kubota L6060 (cabbed) and had a hand full of questions. Rather than post single questions in different forums i thought it would be less messy to just list them out in one...
Looking at one or the other With cab. Had looked at them side by side at a dealer there things on both I do and dont like . Price quoted was $47,000 l6060 $40,000 mx6000 base options . Add ons for...
I bought an L6060 in Jan 2016 for mowing duty with a Woods BB720X 6' cutter. This is a heavy cutter and I use it on steep ground with many trees. I am routinely turning sharply and reversing...
Still shopping for a BW mower and one alternative that I'm considering is a 12' BW so that I could use it with my L6060 if I sell my M9960 at some time in the future.
I've seen the Woods BW 12...
2017 L6060 cab, loader HD bucket, heated rear and quarter glass, rear lights, and wiper, mid pto to run 4479 snowblower with hydraulic shoot deflector, R4's. 55,900 no tax. Anyone purchase...
As I am now down between Green and Orange, I want to get your thoughts here on the above 3 units. I have done the basic research and understand the spec differences between the 3 units above...
I recently ordered an L6060HST. In going over the display model, I found there was no way to defeat the OEM seat safety switch. On my previous Kubotas, simply folding the seat forward would...
You guys know that I have been waiting on a L6060 since May. Last week while kicking tires at the same Kubota dealer, I looked at a M 7060 w/cab and FEL. Anyway, I read all i could last night...
I've seen a couple of threads on the new model Grand L6060. Couldn't find any details about it on the Kubota website, though. (Might not be lookin' in the right spot!) Any links or sites to get...
I'm in the process of making a guard for the 3rd function hydraulic hoses and noticed this weird little plunger coming out of what appears to be a bolt in the bottom of the transmission. Can...
Any thoughts on this machine used as a 100% snow removal piece of equipment? There's a 2019 L6060 with about 1200 hours and a Pronovost(?) drag blower.
This is for property management in...
I would like to know what the overall height of a BH92 Backhoe is on an L6060 with 14.6-26-R1 Titans? I am building a barn and would like to have plenty of clearance for storage and while driving...
Hello,
I am a new Kubota owner - picked up a L6060 in Feb 2014. I have a dealer installed FEL, FEL 3rd function remote, and rear remote. I am use to a gear/clutch tractor, so this HST tractor...
My good friend wants to purchase a 60 hp range tractor.He has narrowed it down to Kioti NX6010 or Kubota grand L6060.Any thoughts on comparisons good, bad or ugly?Great dealers for both in our...
Greetings,
Got my new L6060 a couple weeks ago. I've had it in the garage a couple of times. Once to put fittings on the 3rd function and then a couple times getting the aux lighting mounted and...
I noticed this weekend when driving down the road from one field to another, separated by about 1 mile, I had to continually turn my steering wheel counterclockwise to keep the tractor going...
Does anyone have the optional air ride seat in their Grand L series? I spent the extra money on it thinking it would be a nice addition. Well first thing I noticed was that it didn't feel like any...
Hello, long time lurker, first time poster. I have a brand new L6060 with cab with 3 hours on it. It was delivered this past Friday and driven around the 吐arm then put to bed in the garage...
So after 5 plus years of on and off shopping I finally decided on Kubota. My first choice would've been an L5460hstc. My dealer (Large/multiple locations) could not locate a single one in my...
I decided to do my first oil change on the New L6060 today, even though it was a bit early (44.2 hours vs. 50). Also on the 50 hour list was a transmission filter change (I've got the HST )...
My M7 was down for 18 days due to a leaking o-ring in the suspension - o-ring not serviced separately, odd size, needed to replace entire hose and expedited shipment took 18 days - did I ever say...
Well had it a few months over 2 years but wanted to share my thoughts on the tractor. I am not new to tractors, this is my third orange and have had Case and JD previously also. I did compare the...
What am I missing on the advantages of each?
L5740HSTC- Simpler Tier 3 Emissions, Better (more protective) hose routing, slightly lower prices, more used units on the market
L6060HSTC- Less...
My almost 2 year old L6060 starting something strange today. When I run the tractor up a slight incline and release the go pedal the tractor stops and then slowly starts to roll backwards down the...
Soon I will be buying a large hydrostat CUT to replace my 44 PTO HP MF 533. The tractor will be used as my "first round" tractor to pull a heavy Woods BB720X 6' cutter.
I spend a great deal of...
I recently purchased a L6060 with a cab and it does not come with any kind of tool box, nor does Kubota offer any tool box option.
I'm wondering what other L6060 have done, if anything, for a...
This is a very minor issue but I thought I'd post to see if others have noticed this noise.
I've got 125 hours on my L6060 and I'm now noticing a noise which I can only describe as "gear...
I've got a hunting lease that I'm going to start to mow/spray on a rotational basis to keep the woody plants at bay. It's in a federal program for grasses/nesting cover. There are 6 different...
Today I went to use my box blade which has a category 2 three point. When I raised the three point, the metal pieces on the outside of the adjusting handle on three point lifting rod contacted...
I've been struggling with this for a couple of weeks.
My local Kubota dealer has a 2012 non Tier IV cab L5740, while my local JD dealer has both open station and cab non Tier IV 4720s.
Being an...
Hi guys. I have an L6060 with canopy that I have to unfold and fold the ROPS every day for the next couple of years until my barn with more clearance is built. Its a waist of time to be bolting...
I just got a new L6060 today. I previously had an L5740. On my L5740, I could curl my grapple and open/close it at the same time. I am not able to do both simultaneously on my new L6060. I ordered...
I have been reading over the information on Kubotas Grand L6060 as well as M9960. Now the L6060 base price is within a few thousand dollars. The L6060 is 60Hp and the M9960 is 100hp. I am just...
I've been reading a lot of threads about how great it is to have a TnT so I went to the local Kubota dealer and ask how much for a system. The parts guy didn't know what I was talking about. So I...
A few Grand L6060 tractor owners have asked me if my L3560 winterfront kit would fit their larger '60 series tractor. I wasn't sure....even though I was led to believe that they would. Now we...
I have a L6060 that needed some weight added on the rear when I use the grapple or bucket. I wanted something that was also useful so I built oak 2x6 boxes on the top of my box blade big enough to...
First post here,
Like the title says I am trying to compare the MF 1760 vs the Kubota L6060. I live on about 4 acres, where I mow fields, have a garden, lug firewood around. Also, I have a 5+...
I'm considering a Land Pride STB1596 for my L6060. Yes, I know it's mid summer but winter will get here eventually. Although there is a lot here and elsewhere on FEL snowplows, I've found little...
Whenever I start my L6060 in below freezing temperatures, it immediately rev's up to full RPM and will stay there until the machine warms up. It's stored in an unheated garage, but the block...
Ever since I got the L6060 I would always reduce the engine speed to idle before turning on the PTO. Then I watched this video and I was kind of shocked to see him engaging the PTO at full...
The Kubota Grand L6060 is a tractor I am considering buying. So far I have not heard of anyone having one. I would be interested in anyone's viewpoint of this tractor and what they think of it...
I have a '22 Kubota L6060 Grandcab. I tried brush hogging at night last week. I'd run out of daylight and figured 2 headlights & 2 worklights at top of cab would give me ample light to get the job...
Hi all,
Looking to add a rear blade for supplemental snow removal (have a front blower on an L6060) and am eyeing up the RB3796, possibly with the hydraulic angle cylinder. Do you think this will...
What are the differences? Why is one better than the other? There is a used M for sale close by and I am deciding whether or not I want to take a look.
I think I want a 12’ batwing chopper to maintain a hunting lease. Mowing around 60 acres annually of 4’ tall grass/weeds and brush up to 2” thick. The field isn’t all that thick, but some is...
Okay so have decided on a L6060 tractor and will be a couple of so weeks for dealership to get in, So thought would look at videos on the way to operate the controls of the tractor. Well I have...
When using a cat2 implement on my Kubota L6060HSTC, I have found the adjustable lift rod on the right side contacts with the power beyond line. This damaged my power beyond hose last year. I am...
I’m curious to know if there is a backhoe option for a 6060 cab tractor utilizing a swivel seat instead of a separate seat requiring you to get out of the machine
My needs are to mow 15-20 acres in summer, and do a one-time clean up about 8 acres of downed trees and debris. I had previously decided on a Grand L6060, cab model, with loader, heavy duty...
Love my nx 4510
But was at kubota dealer yesterday and seen a l 6060 and it is a nice machine seems bigger
Does anyone know if it is the same frame size?
New Kubota cab L6060, love tractor but want to change headlight bulbs to LED. Tried searching and have been unable to cross reference the part numbers with known bulbs, any help would be...
My dealer delivered my new L6060 ROPS tractor yesterday, and I spent New Year's evening reading the operator's manuals.
The manual states to engage the front wheel drive "with the tractor...
I have a Kubota L6060 with a 4-in-1 bucket and a quick connect coupler for the hydraulic hoses. I now want to connect a hydraulic post hole auger to my front end LA1066 loader and using this...
Book is telling me to change both filters. The dealer also supposedly sent me everything I needed for the 50 hour service, and both hydraulic filters were in the box. But doesnt one of the...
Am I crazy to spend $25k to upgrade to the L6060? My L3940 has been very good to me and I'm almost to 1000 hours on it. My annual hours are typically 100 or so. I plant food plots, have a small...
Battery showing signs of being on the way out in my L6060. Part number comes up with 80D26R. I’m a fan of AGM batteries, what replacement batteries are you using? I know it’s a group 26r, but I...
I'm looking at a 2017 L6060 with 100 hours that includes cab, loader, root grappler, Paladin 6 way snow plow, forks, Gannon drag box, 6' County line bush hog, two 3 point quick hitches. Tractor...
I've got a 2019 L6060 with 340hrs on it and I noticed the engine oil level is going down. Since the oil change at 50 hrs the level has gone down from the top mark to about 1/3 of the way down to...
Upgrading to a larger tractor from my BX25D. Ordered a Kubota L6060 a few weeks ago (62 hp engine, 53 hp PTO.) Was told today they are on back order with no estimated delivery date. "Probably...
I traded my 3940 last week for a new L6060 Cab Tractor with Loader, I've been making it my own and started installing a radio and upgrading the factory speakers this weekend...
I installed a...
When shopping for my L6060 tractor, the cab model I saw at the dealer had a cigarette lighter style 12V power outlet in the right fender console. When I took delivery of my ROPS model L6060, I...
I need to order a Hydraulic Top Link for my new L6060. The mechanical top link it came with is Cat 1 on the tractor side and Cat 2 on the implement side, and seems to have a minimum length of...
I have an L6060 on order and I'm considering the mid PTO option. Since I use the tractor on uneven ground and in the woods, I'm concerned about damage. I don't plan to mow with a mid mount mower...
Just bought a new L6060 and was wondering what the best top and tilt kit is? Should I go the Kubota kit or is there a better aftermarket option?
Thanks
Brett
I'm working on a deal with my local Kubota dealer for an L6060 ROPS (cannot use cab tractors for multiple reasons) CUT.
My local dealer has priced an L6060 ROPS with R4 tires, LA1055 FEL, Kubota...
I got news today that my L6060 Grand will be in the port on the 26th 0f June and at the dealer about a week later. Since I own a JD 110TLB and a Ditch Witch sk755, I decided to not get a loader...
I have looked in the manual and understand everything on the tractor but cannot seem to find any directions to change the speedometer to miles per hour. Please advise! Thanks.... :)
Thinking about trading my L4240 HSTC for one of the above mentioned.Purchased the L4240 new and it only has 1200 hours on it.I would like a little more power and weight but not sure on giving up...
Have a new L6060 with dealer installed rear remotes, 2 sets. Seem to be getting fluid through them, but not under enough pressure to work hydraulic top link or mower. Both attachments work fine...
Considering upgrade to Grand L6060 HSTCC (used primarily for snow removal)
Anyone with one of these that can provide feedback on real world experience:
1. problems (mechanical, electrical...
I have a 2014 Kubota L6060 with Cab. It had an oil leak from the steering cylinder. I removed the front axle form the tractor to get a better acces to the leaking seal but pulling the axle out...
I have two outlets in the cabin: 1. cigarette lighter 2. A 4 pin outlet on the left side under the side window.
The outlet in the pics measures 1.5 cm from top to bottom and 1 cm width where the...
The documented specs on the L6060 HSTC cab height are 92.5" which leaves me 2" to spare on my 8' garage bay. For the specs, do they use the tallest tire option to document the cab height?
For...
My new L6060HST is the first Kubota I've owned with the new style treddle
When depressing the pedal to go forward, there is very little play and the machine moves almost immediately. In...
Hello,
I have an L6060 and I also got to spend a few hours in the seat of a Workmaster 75 with the power shuttle transmission today. I love the L6060 and also enjoyed the Workmaster very much. I...
Thoughts and a quick review of my Kubota L6060 now with just over 80 hours on the clock.
What I ordered:
6060 HST, 4-1 bucket, added 3 hydro to the rear, top and tilt installed, sun canopy...
Mowed for about four hours with the L6060 and Woods BB720X HD 6' cutter today. Parcel is mostly fescue and orchard grass, is irregular, some places steep and lots of obstacles. M9960 with either...
Wife and son are thinking of upgrading the L3940 to the L5460 or L6060, Open Station, no Cab. They all have the same engine except the L4760 is non-turbo. The wheelbase is 0.8" of an inch longer...
It looks like my son has decided to go with the L6060 Open Station, FEL, R4's, 3rd Function, one set of rear remotes with Float, loaded rear tires and 2 sets of rear wheel weights. This is...
Hello guys I'm new to the forum and considering the purchase of a Kubota L6060 with a backhoe and I'm curious if there are any users with this combination.
Thanks
Mike
I am going to be buying a new tractor here in the next few month's and have been giving some thought to the options.
1. I may have a use for remotes in the future. Is it more cost effective to do...
Yesterday, the bolt attaching the telescoping stabilizer to the right lift arm on my L6060 sheared. The tractor has less than 50 hours on it.
The BB720X is Woods middle duty series 6' cutter and...
When I bought my L6060 I was aware that, being a hydrostat and a large one, it would be thirsty, and it is. Moreover, it appears to make little difference how heavily it is loaded as about 2,400...
Evening folks, long time lurker here
Purchased a pre-owner but unused BH92 recently. I ordered the BH4999 subframe and the BH4982? Mounting kit for my tractor to be able to use the BH92.
Of...
I will be purchasing a new tractor in the spring and just picked up a brochure on the new L60 series tractors, what are the L6060 w/ loaders going for? I'm sure they are as much or more than a...
I have seen similar but not identical threads. My local Kubota and JD dealers are about 2 miles apart, so distance not an issue. Both are quoting almost the exact same price (within a few dollars...
I bought a used 2018 L6060 open station and would like a better seat. I’m 6’2” and 235lbs. Is the oem air ride the best option or should I look at something else? I would prefer to sit a few...
I am considering a third function for the use of a loader mounted hydraulic post auger. I'm ordering a tractor in a few weeks and I'm debating a third function.
I have been researching this and...
I'm installing 2 rear remotes on my new Kubota L6060, and the instructions leave much to be desired. So I have 2 valves, a float detent and a double acting valve. Is there a standard or...
Just got new L6060 HSTC from Barlow's. Traded in my L5030 HSTC.
I am totally impressed with the tractor especially the larger and quiet cabin.
But I am having one problem: when I turn the key to...
My new L6060 has an intellipanel which displays speed, fuel used, hours, etc. The tractor came from the dealer reading in kilometers per hour. I've learned how to reset the panel to mph, but...
I have a 2019 L6060 HSTC Grand with a OEM (Grammer) air ride seat. I understand that this factory option technically disables the stationary PTO function. You cannot tilt the air ride seat up to...
I am looking at purchasing a used L6060 that is not equipped with the factory option air ride seat. Can anyone tell me what would be involved with swapping out the factory spring seat with the...
Gentlemen,
I've made the decision to buy a Kubota. That said I'm very interested in the differences between the L6060 Grand w/1055 FEL and the M6060 Cab with appropriate HD FEL. The money is...
A SHEDDED BEAUTY PRICED NEARLY $15,000 LESS THAN NEW!
A Kubota Grand L6060 tractor with only 203 hours on it that’s always been shedded when unused.
The L6060 is powered by a 62hp Kubota...
This subject has been done to death over the years here on TBN but I'm curious if anyone has come up with any new ideas.
As many owners know, putting a tool box on a cabbed L6060 is a bit of a...
This is nothing new. Like many others, I've been using my 3rd function valve as a rear remote for some time. I have a T&T kit and 3 rear remotes on my L6060. The T&T uses two leaving one spare...
Lots posted on batteries here lately, so here's my contribution.
I'm not sure what's going on with Kubota batteries these days. It's been my experience that they used to average 8 - 10 years...
I finally got the new L6060 tractor a week ago and have finally got around to going over a few things and getting it figured out. It now has 2.2 hrs on it. One thing that I noticed is the ride is...