Search results

Thats one way to look at it I guess.....

Well, that is pretty good luck to not have a flat...Ive had my share over the years and know how things mite go. I do not plan to change a full fluid filled tire either, Just if it is flat or going flat and the fluid level is already dropping anyway....been there done that...I de- beaded a rear...

So here is where the dealer left me..they swapped the tires to what they are calling the wide position. For me that is better than the narrow position. However they told me they could not set the outer ring tabs to the outside of the inner rim. They said it is because of the cutouts on the back...

Thats the going rate in my area also $125 hr and all dealers are pretty much on par no matter the brand here....

I agree with you completely on this, however to be clear and not get in a ny type of dealer bashing here the tractor i am buying is a 2021 model with 270hrs....so not exactly new just new to me! They are willing to do it, but they want to charge 250 bucks or 2 hrs shop time to do it....thats...

That is around the cost if i take it to get it fixed the mobile service here is a lot more expensive.

yes i do, but with the cast centers and filled rear tires i think i would be heavy enough.

Thanks I understand the concern with the weight of the outer rim tire, i have a second smaller laoder tracotr to help if that ever happens and thats the only time i would be seeking to test my superman tractor tire changing streghnth. I relly do not have a very good field service tractor tire...

Hey, I have been negotiating with a dealer on a used M6060 they have on their used lot. Good shape and deal is almost done. But it has the cast iron rear wheels with radials. I do not know the exact size radials at the moment, but here is my question, The outer rim is mounted to the inside of...

I may have not read enough to fully understand if you financed through Kubota or not. But I can tell you for sure if you used an outside finace source I.E. your own bank, they all do not requre insurance on the Tractor dpendant on you and your banks relationship and their policies. The dealer...

Thank's I just ain't near miller tire, well bout an hour away, If i wanted Amazon will ship me 2 to my doorstep for rite around $170. Just looking to use what i have here maybe. Thank you for the reply though.

This helps too Thank You

Yes i have the manuall tire changer and the black goo from napa, do my trailer tires when needed and a few front tractor tires when need arises (you know that need Saturday after lunch, everything closed got to get back to tractoring)I may check on the lube though, i been using the dish soap...

I already havee several tires Lying around and my own tire changer, I do my trailer and other tires at home atv utv front tractor etc.. My Vehicles yes I do go to a shop but Not really wanting to go that route with this. Thank you

Thank You thats what i needed to know Ive already got some 205 15's laying around used. The ones on the rake are equipment tires and are bad cracked and most likely the original tires, I already tubed them about 5 years ago and was really looking at this option Like you I mount my trailer and...

Hello I am trying to figure out what size tire I can Replace a set of 5.00 x 15 implement tires on my hay rake with. I was hoping to find or use some of the used tires i have around the farm i just do not know exactly what will cross onto the rims. I have tried online conversion charts but none...

Thank You!

Thank You, and i can understand the extra protection from libs and trees Makes your bota look really tuff tho, i like it!

Yes square would have been better to build around. Man yours looks like a tank with those tubes coming up to the front....I like it!

Thak You!

That is nice, on a little, or a lot higher skill level than me though, but it is nice. And yes Square fenders would have been easier to work with but that's why i just squared the bottom of my tubing. I figured i could fill in between the tubing and the fender if i ever wanted to.

Hey, I know we have been here before, but I wanted to post some pics of my recent project on my M6060 Kubota. Just putting it out here for others to see what could be done to a larger utility tractor. I've seen a lot of smaller cab builds but not many on larger utility tractors. I will add a...

2-1-2023, Kubota just Offered 0% for 60 on mx, m, and m4 utility tractors, They will sell.....Somebody will buy them at that, because you cannot touch that rate at a bank now....not even close...

You said you mow 4 acres? Keep the 8N, upgrade the electrical when you have time over the winter. Buy a good quality zero turn and forget it! that is my opinion and you did ask for them LOL Good Luck. But seriously keep the 8n, a dealer will just take it from you for nothing and everybody else...

Depending on the state you live in. I know for a fact that if you register a vehicle through your dmv with farm use tags, and actually fill out the paperwork for them to do so. CDL, Weight and air brake requirements go away as long as you stay in the mileage range and don't do hauling for hire...

Do what you want but as of today Feb 1st 23 Kubota and Kioti are offering tractors at unbeatable finance rates. Kubota is doing utility tractors at 0% for 60 and I just watched a video on the Kioti CK2610 I believe and their financing is 0% also and also cash back options are great. Up to you...

Maybe already said but weight and speed have a lot to do with the ripples. weight because the 3pt has no down pressure and just bounces with every rock and bump. angle will help with the grader blading and some of the ripple effect. The speed effects box blading a lot. But the box blade could...

You missed part of why I wanted to find the correct bolt, and I have future plans to attach to those bolts, which I did not exactly specify in the post. My challenge and the first thing I had to do was make sure I had the correct bolts for the holes. Those holes are blond holes in the front of...

Thank all of you who stayed with this post I have actually seen a lot of tools and gained experience from this and that is what this forums are about. Again thanks to all and it is confirmed for sure 16mm x 1.5 threads in case anyone else ever needs to know. also they are about 40mm deep.

Thank You Very much. I got a tap and ran it in the holes and cleaned them out and they work perfectly.

ok on the tap understand thank you again

Hey that is great information..I went by my local Kubota dealer today and told the part's guy what I was looking for. As usual He get's on the computer and starts searching the diagrams, I told him he would not find them by diagram. After about 3-5 min looking at his computer screen and asking...

Hey I would if I had one, I'm by no means a mechanic (that should be obvious by now lol ) and the tap and die set is what I have and it's missing some, or, maybe a lot of what used to have in the set. My guess is that if it had a pitch gauge it got pitched somewhere at one time or another over...

I most likely have to agree with you on this point, mm that is, it just dosent seem right that the 16mm is so disagreeable. however i think we will know for sure in the coming week as i hope to have more time to get it cleaned inspected and a fresh bolt or 2. I am not even beyond going to a...

Hey i need to also revisit my earlier post and say, 16mm will almost go in the hole but the threads don't seem to start at all and after looking either/both fine and course threads, of the 5/8 bolts i tried seem to be getting messed up where they are trying to start.....i tried again after i...

Not exactly the thread i started but could be a discussion here... while we on the subject do you think or know if the loader mounts are cast iron or cast steel and how do you tell the difference...ping it? like a cheap anvil..????

this may be very helpful to. i will have to dig around and see if i can find one locally if not it will be googel's and a day or to.

this may be helpful just trying to find the right threads first thank you

Bolt Update....here we go i have had time to fiddle with it some in between trying to do another million things. 1st off my tap and die set only goes to 1/2 inch bummer, that's just too small. Second 14 mm is just too small and 16mm is too big to start or even go in the hole. Third, and the...

Update, Sort of? I was able to get some bolts and get to the tractor today. 14mm is too small and goes in the hole without even touching, However 5/8 bolt seems to be about the right size and will try to start a thread but i did not force it for fear of cross threading. So here is my plan, I am...

Yes, the depth of the casting I am definitely already aware of watching as I do NOT want to crack anything That's also an important reason I want the right size bolt because it is tapped cast metal and I do not want to be trying to cross thread anything in it and risk expanding/cracking metal...

Another cool tool to have in the garage Thank You very Much

Great info thank you!

this is very handy thank you!

There is a wealth of information i am getting on here, and i understand some of the frustration also. I am away from the machine at the moment until next week for work so i was trying to get the right size to be ready to go when i get back to it. as i said my last try-s didn't produce any...

they should be it 's on the same frame, Thank You

very cool tool i will have to check this out thanks

not same as mx. i have a m6060hd thanks

this may be an interesting idea if i have to, i think they make a substance just for this "casting" technique in a different application though.

nope the 10.9 is the grade not the size

Yes i have those 16mm bolts i ordered that say 10.9 on the head also but they again are 16mm with a 1.5 pitch thread

You have the correct understanding of what I am needing. Yes those empty holes in front of that bracket are what I am trying to find bolts for and yes they are threaded. However this is just a picture I found of someone else's tractor showing the holes. If I had tried to explain where those...

I would love to have the option to take one of those bolts out and take it with me to a good hardware store or a local fastenal. But That is just a picture I found showing the holes i am needing bolts to fit. I agree with everyone that they are most likely metric....and reason I want bolts is...

Hello, I am trying to find the correct size bolts to fit my M6060 I am attaching a picture I found showing the bolts holes I am looking for. I have tries several sizes both metric and SAE but to no avail. And I have looked at the diagrams at Messicks and they are not shown. Anybody Know what...

I will admit i have not read all of the post's in this thread, however as a multiple tractor owner and part/full time farmer i would offer my 2 cents. no matter where you live as you drive around pay attention to people working tractors in your area. This does not mean go buy what you see the...

I will admit i have not read all of the post however, what i read sounds like what you have described. I also have had my round with tractor problems myself and it has in the end cost me a lot of money trading and getting rid of units that were problematic from the get go. I would like to hear...

Hey, I was just trying to find anybody that had some experience with a Massey Ferguson 142RV Round Baler. I am looking at one locally for sale and can clearly see it as a rebadged Hesston Unit and i think the model 1734 followed it. It's a 1996 model and looks by pictures to be in good shape...

Thank you yes i did get the response I did read the response and got the answer thanks again.

Thank all of you for the responses, I get lost in the conversation and think you guys are maybe blaming me for the "pretending to be a farmer and a kid" comments! kind of boggles me actually, however after re reading the posts and the response's to my last reply, I'm pretty sure it's not me but...

??? I just want to be sure here....It was not my post or my comments that offended anybody right? I think my post took a left turn to somewhere I did not intend, and is being used in a way I could not have imagined! I just had a Corn Question, and it turned into a Corny, Catastrophic, face...

Thank You and agree with moisture, however I can irrigate my 2 acres fairly easily if it sets in dry. Also, I think any farmer is as real as the next farmer just scaled differently and takes a different gamble. And I agree with learning something new always.

Thank You again, it says 112 day corn. I am looking more for the fodder/maze end but just wanted to know that I had options for the actual corn ears left over after they dry on the stalk and don't get eat by wildlife etc.

My Opinion Buy the Kubota and don't look back, Just had the same problems with availability of the m6060 the whole tractor though. They made sure I was serious about trading/buying after just a few emails and 2 visits and they had me a whole unit in a week from another dealers inventory. It was...

thank you

Ok guys, just to sort some of the responses I have got from my end, First thank you for taking the time to reply, Second, I looked for an appropriate subtitle to post it in and came up with nothing so I gave it a shot in this forum. Third, I agree with the forum/site being here so we can help...

Hey I know this is a Tractor Forum and I should ask somewhere else but I am not a corn farmer and hey, Tractors and Farming usually go hand in hand so here it goes with all apologies. I just planted a bag of field corn to use and sell as fodder shocks in the fall, I bought the seed at rural king...

Thank you for the input and views, I have never worried much about this myself and have had several major hydraulic warranty claims in the past on new tractors with no issues from the dealer. I just wanted others opinions on the issue he brought to me. However in this world of Passing the buck...

I been a tractor owner a long time and a friend of mine just bought a new Bota with lots of warranty. He asked me if he used it with his equipment that had hydraulics on it would would it void the warranty? I was stumped, I had never really studied this question until now. His reasoning is that...

Hello, i just recently picked up a John Deere 350 sickle mower 9 ft bar. I only got half of the PTO shaft with it and for the price i got it i was ok with that. Here is my problem, I took the PTO Shaft off the Mower and it is 21 Spline at the mower end, Easy enough i figured, so i bought an...

I have a New Holland T4.75 with a Sanden SD7H15 air conditioner pump and i am looking for the clutch kit. Does any New Holland or shop guys know if i can buy just the kit or do i have to get the whole compressor. Google finds me the Whole compressor but having trouble finding the clutch kit? I...

Hello all, I just wanted to get some other opinions and objective discussion about a situation i came across this weekend. I observed a roofing contractor who installs a lot of tin roofs. He was doing something i thought was maybe worth discussing. I observed him working on an existing roof...

I recently acquired a 2014 t4.75 powerstar and i got in it today and cranked her up to use it and it gave me a foot throttle sensor code of 3003. The engine also was idling very high. so i shut it off and restarted and it went back no normal. My question is i had to research the code to find it...

Hello again, Just an update. we went and met the Boy he was very nice and very accommodating. We crawled all over the tractor and drove it around for about an hour or so and he even offered to let us hook it up to something and run the pto and hydraulics to test them. I told him we were going to...

Hello ANY T4 Owners, I am going with a friend today to look at a 2014 NH T4.75 4wd with loader and cab. Tractor has 400 hrs on it and is 2 owner. The current seller says it is too big for him. But his asking price is great, maybe too great, almost scary great! but it is 10 minuets from our...

Hello folks, I wanted to reach out to the New Holland T4 owners and get some input. I am going today with a friend to Look at a 2014 New Holland T4.75 4wd cab with Loader. I have read a lot of negative reviews, and a lot of good reviews and Myself have had several tractors but nothing this big...

Hello everyone, I have a ditch that is about 8 ft across at the top tapers to about 3 ft at bottom, around 6-8 ft deep and about 75 feet long . The pond drain runs in this ditch all the time as i have a spring fed pond. The pond drain is 10 inch and handles the pond water just fine until heavy...

Hello again. My question is can i convert my current style leveling box which is almost froze up and change it to a style with crank handle. The only ones i can find say they fit a 3910 and not a 3930. I have had my leveling box apart and cleaned and re greased and thought it was free. But at...

Ok Guys Gals and anyone who has information that can help. I just purchased a new to me 1997 3930 with 7310 front end loader. The loader is plumed to the rear hydro outlets. I have a problem with this and a future upgrade so here is my questions. 1 the loader works up and down just fine. the...

Ok I am getting ready to take delivery of a new to me 1997 NH 3930 with 7310 Loader. The loader is plumbed in to the rear Hydraulic remotes and you just use those to operate it. Now this set up will work to use the loader but i would like to go ahead and change it over to a joystick. I have...

I have a sprayer i am going to use on my T1510 new holland. Now it does not have rear remotes but it does have a loader. So my plan is to use the bucket curl and tilt functions to run the hydraulic cylinder on the sprayer VIA 2, 3/8 hydraulic lines. I can buy the lines at TSC or another local...

So i find myself looking at the same Workmasters i have owned already, 2 of them in three years to be exact. Long story behind that but, I have been on a lot of dealers lots lately all brands and all colors. I have came to my on conclusion that for the money and size Utility tractor Kubota...

Hello, I am in the Market for a new tractor, and i would consider the RK55 CAB Loader Backhoe. So here is my questions. Has anyone who owns a new Rural King Experienced a service issue in the field. 2 Hours away from local store and how did that turn out? Next, If Rural King were to go the...

Ok Another Post to Help decide Which tractor, Had a dealer Kubota quote me a 3pt woods backhoe in the deal and it's not a bad price. But as i told him i worry about the 3pt backhoe and would rather have a subframe. He stated i wouldn't need it on a M5660 due to size and weight? any thoughts. I...

Ok here i am Been looking at tractors and trying to decide over the past few weeks. I have finally narrowed it down and i am leaning heavy on a KIOTI NX5510 CAB SHUTTLE SHIFT LOADER BACKHOE.......Got the pricing worked out got the dealer picked out, and Bang for Buck it's a no brainier. Just...

Hello again, I am Looking really seriously at the KIOTI nx5510cab tractor gear shuttle shift ag tires r1. The weight of the machine is where i am trying to decide if it's heavy enough. Specs list it at 4551lbs . Now i assume thats without loader, and i plan on running Fluid in rear tires also...

Ok so i find myself Tractor Shopping again....Little background, since 2017 i have owned 2 NH Workmaster tractors, 2017 WM 50 and 2017 WM60, first one 9 trips to shop in 3 months, dealer traded me out to the 60, ran it 6 months and then back to shop for same problems as first Hydraulics, Sold...

Hello everyone, I have been tractor shopping lately and started a few posts trying to get some views of others on this here is my predicament. In the past 2 years i have bought 2 new workmaster tractors. one was a 50 and one was a 60. the first one the 50, had major problems in the first 3...

Hello, Been Looking around and been pricing tractors again. Does anyone have A new Workmaster Cab Tractor yet? I have drove one at the dealer several times but want to hear from someone who has Purchased and is running one. Any Problems Yet? Any Negatives Positives or Anything.......i have owned...

Pricing new Kubotas and one of the things i am getting is the up-sale on how one or two dealers are Elite Kubota dealers while the others in area are not. And to be Honest it's kind of frustrating, yes i want great service after the sale, but do i want to sink another grand or two (in my case...

Hello, I have recently sold my New Holland Workmaster 60. After 2 of them in 2 Years i am looking hard at other brands and have got what i think is a really good quote on an M5660SUHD W Loader and grille guard. Under $32 OTD. Will negotiate for the canopy before deal is done. Anyway here is my...

Hello again, The time of year when maintenance on the farm is in full swing due to weather. I have came across an idea and want some opinions/suggestions. I have a Walton 2 basket tedder and it's old but still serves me well. i keep it greased oil checked and tines replaced whatever it needs...

Hello again hope everyone had a great Thanksgiving. I been looking around at air mist sprayers and priced a used one today at $3200 it was an A-1 Brand and it did not look very used and it was well kept. However I just cannot help but look at these things thinking....Is it really that costly to...

Hello everyone, Has Anybody seen the new Workmaster Cab Models coming? Spoke to my dealer Yesterday and he said they are ordered should be a couple of months delivery time. Said they are pretty comparable to the old tn series with a similar in style Boomer cab. Also said they are doing away with...

So How Long does it take a new tractor to become a reliable tractor? This is the question i find myself asking every day. Now it seems that it does not matter the color or the brand, and from what i hear they all have some sort of issues right off the lot, and we have a warranty for that. But...

Ok, so Let me explain,,,, Up until a year ago I been running a New Holland t1510 with loader Ballasted rear tires approximate total weight of say 5000 lbs Not exact just estimate. So i been pulling it around with my 1500 chevy no problems pushing the limits with 16 ft trailer but no problems...

Hello again. I have a 2017 New Holland Workmaster 60 with a 621tl loader. Recently the dealer had to do some hydraulic work on the tractor which included replacing the loader valve. Since the replacement it seems that i have to pull the joystick all the way to the rear just to get the loader to...

Hello, i am new to this rake and have to get some teeth and holders. looks like the new holland teeth may fit it but unsure about the hold down as the bars seem bigger around than the new holland's. anybody out there got the part number for this rake and would care to share or maybe even have...

Hello, Question and i am sure it's been answered somewhere just couldn't find it. I have a New Holland 269 baler, what size roller chain does it use in the main drive and the pickup drive. I have looked through a good copy of an owners manual many times and cannot find this information. Would...

Well gentlemen, For the lowdown tonight....AND yes, I did tell them to do the 50 hr service the last time it went to the shop and it needed to be on the house since they have put as many or more of those 50 hr's on it as i have......... Now on to the Story........ After that last phone call i...

Hey, I posted this in the haying forum a couple days ago but no responses. Didn't know how to move it so here we go again.... Hello, I was wondering anybody still use this baler. Picked one up cheap yesterday. In good shape but I need a door switch alarm and have found it a t messicks but $120...

Hello, I was wondering anybody still use this baler. Picked one up cheap yesterday. In good shape but I need a door switch alarm and have found it a t messicks but $120 sounds a little steep. Any body got any ideas? I had seen somewhere that someone used a different switch Maybe some type of...

Hello . It's a long post but i had to tell the story for you to understand... FIRST AND FOREMOST........ I want to say that i am not and will not.. dealer bash or bad mouth...and if you happen to read this post and know of the situation please, Do not mention the dealer or the people that are...

Hello, I have got 3 different cash prices on the same tractor from 3 different dealers in my area, The tractor is a Workmaster 50 4wd, fel, fluid in rear tires and canopy. 1st dealer says 25,500 no canopy, 400 extra, but all other the other things listed. 10 miles away. 2nd dealer says 25,600...

Hello this has probably been asked before but i just have trouble finding it and just want to make sure i am thinking correctly. I am looking at getting a sickle mower for my farm and looking at the superior, enrossi, or other such model i do not have rear remotes but i do have a front loader...

I have a New Holland T1510 tractor with fel and fluid in rear tires. Been mulling around about trying it on a Baler this summer. Not Much, I know it will turn it and all but just want to get some interesting feedback others thoughts anybody do this with similar size equipment. Hay gets expensive...

Hello Folks, I recently picked up a Ford 505 sickle mower, the same as an IH 1300. I need some information on the mower and have a few questions from the more experienced on here. My first question would be is, what type of knives do I need to buy and possibly part numbers from somewhere like...

Hello, i am considering buying a new holland 757c backhoe attachment for my new holland t1510. I do not have remote rear hydrolic's, and the hoe does not come with a pto pump. I do however have a loader on the tractor. is it possible to just extend the bhoe hydrolic lines and use one or two of...

found answer ... Thank's but. if anyone knows how to delete threads they started and don't need anymore please by all means reply.......

Hello Folk's, I am looking for some opinions or advice on a problem i am having. I purchased a brand new 6x10 deck over dump trailer made by homesteader trailers. I picked it up last Saturday and before i left the dealers lot he hooked up the battery terminals for me. I brought the trailer...

I am currently looking into buying one of the square Fred Cain Agri Cutter Rotary Mowers. Anyone Have any experience with them? Specifically one of the newer ones, I believe they call them the 100 and 200 series cutters. Difference is the pto slip clutch vs shear pin. Another quick question...

Hey I am in the market for a new 3pt tiller. and been doing some looking around and pricing 60" tillers. There is one tiller brand that keeps coming up everywhere like weeds in the garden around here. R.E.I. is the brand name on them, and the price in my area is anywhere between 1499-1899 for a...

Hey has anyone on here ever tried using sway bars on their t1510 or other such size tractor 1710...etc. I really think these sway chains (stabilizer chains are a pain)...I used a ford 2000 for many many years growing up and when we needed them we just used the sway bars on both sides or just one...

Hello everyone new to this stuff so here it goes. I am a small acrage farmer who just traded in a tc24da for a t1510. Anyway the question is, i really liked the tool box placement on the tc and the t1510 does not have one. I questioned my dealer about this and he quoted a price of around $250.00...