Hi guys- I’m moving from NJ to Kentucky this spring/summer and am selling my 2005 bx23 with fel, backhoe, and 60” mower. About 600 hrs. No issues. I’d prefer to keep it but transport costs too...

We are looking to possibly buy this little tractor wanted to know if anybody had any information on it Don't know much about them. Pricing etc has 1600 hours sounds like the only made them from...

The biggest tires x2, diagonals 2x, all four corners 1x?

Yeah, I know there's no operator clutch, but listen. Around 600 hours. I'm mowing, say 2 hours steady, wet grass, motor not 'hot'. On 'quick' turns, I lose steering, mid pto, and drive - comes...

Hi there Does anyone know where I can buy Kabota plastic bodywork from in Europe please ? Does anyone know where I can oder body parts for my KabotaBT23 un Europe? please

My 23 is not stopping when I take my foot off the pedal. As soon as I touch the brake pedal it stops immediately. Currently it kinda runs on. What is the adjustment on this. Much obliged for any help.

As above! Sequence Had a mowing at remote field. Topped up fluid with 'trusted', nearly empty 5 gal can. Saw clear fluid, stopped. Didn't separate in sample jar, just weird to me. Finished with...

How do you stop the tractor from running when the switch won’t turn it off?

My wife and I are considering selling the place and moving to an area where I would not have need for the BH. This is not imminent but… I bought his machine in about ‘12 for a good price. There...

Noticed on my last 'road trip' that my BX23 ignored first few (partial) turns of steering wheel. Let's say the road curved left a bit, and my casual corrections were ignored, startled me, and a...

So I spent 20 minutes or so trying to fold the (all plastic, no spring) seal into an outline of a 'C' that would fit inside the bore. It kept twisting down the bore into an elongated oval. So, I...

are ridiculous! I had done my FEL myself one at a time so I didn't notice as much, but these X4, X1 are really adding up. I was gonna' get the ones I needed and a spare, so far it's $800 for a few...

I have a little apply noise, so researching before I dig in. In parts, I see 2 axle packs of discs that operate by, let's say cams, from the foot linkage. Does replacing these REQUIRE pulling...

So, punched a hole, in my original, R-1, near dry rotted tire, between bars, close to sidewall, so rather curved there. It 'ran', created crack, etc. - not really much tire between bars. Tried...

Thoughts on this price for a new BX23S from a local dealer. The package includes: 2021 BX23S, LA344 loader w/quick attach. 48" bucket w/bolt-on cutting edge. BT603 backhoe w/12" bucket and...

My bx with the fuel cutoff solenoid plugged in is very hard starting, as soon as I unplug it fires up almost instantly, doesn't matter if cold or hot. I have replaced both the solenoid and relay...

My bx with the fuel cutoff solenoid plugged in is very hard starting, as soon as I unplug it fires up almost instantly, doesn't matter if cold or hot. I have replaced both the solenoid and relay...

Tried sending a message to a local dealer asking for a quote, got nothing but silence. Are these things still impossible to get?

OK - My turn/hazard flasher failed. (I resoldered all the back side stuff - remained failed.) As you know, it's $100 now. So, researched VA code, wiring diagram, my use - and decided 'turn...

I wasted a lot of time looking at other BX's - so for archiving: On a BX23 with D905: Block drain is RIGHT side, towards radiator, under 905 casting mark, 2 'plugs' in vertical line, upper one...

I got my BX stuck a month or so back. I pulled it out, but now, there is an issue with the MMM raising and lowering. I can't get the mower to lower very much. I dropped the deck, thinking maybe...

I was looking to get a spare, mine says U-SHIN, they show a pic but not a number. Messicks' "Kubota" pump was $139, most by picture on Amazon are $20. Is there a quality difference, anyone source...

Ok, was running just fine. Tank got low. Engine burbled once, I cut it off and went for fuel. Got Kroger car fuel, no fuel buddy! On restart (no burble), after a while (10 minutes?), lost high RPM...

But the actual front (stubby) axle seal at the 2 bearings in the gear cover. I bought these seals along with a pivot set - turns out that was easy after these -...

I have an '04 Kubota BX23 and I started noticing a small drip of hydraulic fluid coming from the drain plug. I ordered both a new plug and gasket (actually a washer I guess). Installed them just...

I have an '04 Kubota BX23 and I started noticing a small drip of hydraulic fluid coming from the drain plug. I ordered both a new plug and gasket (actually a washer I guess). Installed them just...

I bought a Kubota BX23(TLB) a few days ago. yesterday I was trying to get some stumps pulled before the storm. it was going good until the tractor started leaking from the front/mid section. I...

Hi, I'm in the process of purchasing a BX23S. It'll be my first tractor. Used for some minor landscaping tasks around my property. It will be used mostly for snow clearing so I'm getting the...

If I leave my tractor running will it drain the battery if it sits there for 12 hours after it runs out of fuel ? I'm trying to purge the 5 year old fuel that is in it because it is hard to...

I have a new to me 2005ish bx23 and my back is loving it! Everything else works great (hydrostat/fel/backhoe attachment). I just got a 3 point hitch setup and a land pride grader, put it all on...

Greetings I知 in a heck of a mess. I own a 2004 BX23 (serial 67062) that has a rotted-out floor. The part number is K2561-95510. I have placed orders with two suppliers only to receive a call back...

Went over to a friends place the other day. It had been a rental for a few years and there is a small creek, dry this time of the year, about 15' off the side of the house. In walking the place I...

Looking for price to buy a BX23 with loader, BH with 12” bucket, front blade, 60” deck. 1585 hrs. Kept indoors. One owner. Year either 2004 or 2005.

I don't have friends but the BX23 does. I am happy to help neighbors with the tractors. They took more gold out of Nevada County, where I live than any other area of CA. So, we are always on the...

Hi I知 doing a complete service on my BX23 and I have a couple of questions. I have read through the John Thomas service thread. Most of the info is for the newer BX tractors but much of the info...

I bought an '04 BX23, who meticulously maintains his equipment. No problems. Then after a few months, I noticed hydraulic fluid leaking (very, very slowly) from the transmission oil pan drain...

I bought an '04 BX23, who meticulously maintains his equipment. No problems. Then after a few months, I noticed hydraulic fluid leaking (very, very slowly) from the transmission oil pan drain...

I am looking for a left side step up that is a bolt on. I am trying to see if Kubota made one. I have owned this BX new from 2004. Getting older now and have been looking for a step up. I was...

I have tried to mount a mirror various places with no satisfactory results. I tried on the roll bar and maybe mounting on the hood or either side of the hood. If anyone has attached a backup...

Hello to all tractoring dudes. I am reaching out to our collective knowledge base to get some answers regarding a repair/operation issue involving my 12 year old 800 hour BX23 TLB. Sorry for the...

Hello to all tractoring dudes. I am reaching out to our collective knowledge base to get some answers regarding a repair/operation issue involving my 12 year old 800 hour BX23 TLB. Sorry for...

Need to stabilize BX23. We started a project to let wood chips rot down into top soil. We live in an area where the soil has a high clay content. One time my wife needed to send a raspberry root...

Hello all , I'm looking at a very clean BX23 , garage kept 1300 hours , with mower deck turf tires . I'm buying from a place where the fellow buys trade ins from dealers and auctions ect . He...

As above, I have an inherited BX23 from 2005 or so. Looking at tractor and paint chart - Kubota Paint Chart I seem to have yellow paint showing under orange in a number of places, was expecting...

I was in the middle of a stump (I just love stumping) at MIL's and pulled the back out of my 12 in. original bucket. Piddled around on the web and found OK pricing but shipping OMG! Called my...

Hi everyone. Long time lurker first time poster. I have a 2004 bx23 950 hrs. I have been noticing lately that I don't have the normal power when mowing hills and driving up my driveway. It seems...

I have an issue with getting no pressure to the HST pedal (pedal is just limp and not working, can be freely moved up and down by hand) It's a BX23, approx 1300hrs. Just did a service (Engine...

Hello everyone, I now have 72 hours on my BX23S. On my recent project I noticed a couple of things that I wanted to ask if I should contact the dealer for warranty work or if they are "normal"...

for pickup, will trash later this week. I disassembled original seat (to pull vinyl back in line), decided not to repair - it is repairable, but time constraints this week. So if you need metal...

The front axle on my 10-year old BX23 has decided to start clicking when the wheels are turned to the left and/or the right. I topped off the axle fluid and it still does it. (Hard to see the...

Two weeks ago I changed the oil on my BX23 (750+ hours on the clock) and had to use some Amsoil Signature 5W/40 (I use Amsoil in my Ram 4500 Cummins) because I was out of Kubota 15W/40. Now I...

So, I am a newbie to tractors in general and to the forum. I know there are quite a few post on here regarding snow removal for Kubota Sub compacts. I am looking at the landpride/kubota quick...

I recently bought a used 2004 Model BX23MLB, S/N 6657x with a 42 Silver Edge rotary and a 4' boxblade for 9.5k . It was garage kept with 448 hours and everything seemed to work fine with no...

I have been looking at tractors for far too long and finally broke down and purchased! Delivery is this coming week. I was toying between the B2301 and BX23S and finally decided on the smaller of...

We received this tractor used about 2 months ago. It had been run low on hydraulic fluid. It has no visible leaks and the fluid is clean. Today we put 2 quarts of fluid in. This took away the...

Ran out of diesel in my BX23, had just filled it up the day before. Used most of the day but it runs quite a while on a tank. Thought it might be a filter, disconnected the line into the bottom...

Anyone make this move? Thoughts? My 2014 only has 75 hours, I have most of the BXpanded upgrades and wheel spacers, etc. that I would keep, my current tractor also has the dealer installed Land...

I have a 2005 BX23 that lives outside. It has developed the common problem where it won't shut off when you turn the key off. But there is a new twist to the problem that I have not been able to...

Last time I ran the 23 it operated perfectly. A few months ago I changed the hydraulic fluid, cleaning the filter etc. Fluid is clean an tops at the dip stick. Started it up and tried to lift the...

Good morning, new member here. Had my BX23S delivered late yesterday. It was too late to do much on it, but hopefully that will change today. Having 15 tons of washed gravel delivered to start...

Hi Kubota experts. I shut my BX23 down today when I noticed hydraulic fluid was streaming straight down from the curl cylinder on my LA210 front end loader (FEL) Has anyone expericed removing...

I'm not sure how to ask, but.... Is the hydraulic braking an inherent function of the mechanical design, or a function of applying and releasing the same brakes I apply with my foot? If I wear the...

I have been thinking of making a new dolly for my BX23 backhoe. I have a wooden one made of 2X4s and plywood. The problem is that it is too high. It makes it difficult to remove the backhoe...

Hey everyone, just figured I'd share with you my recent project. My neighbor and tractor buddy did a number on his BX23 backhoe bucket yesterday while digging out an old half rotted stump. Mind...

I couldn't think of a better header... So - I have that equipment and some ?'s! 1. For various positions... Why on earth did Kubota supply, for some of the clevis pins, those snap rings? 2. For...

First time towing the Kubota BX23 with FEL and BH (2700# dry weight) today. I figure the gross weight of the trailer with payload was 4500-4600#. I took it slow. Wasn't sure of what to expect...

Some may have seen a couple recent threads of mine regarding Pricing and the backhoe capabilities .... Brought it home today First Stump Third stump..... Check out the tap root on that...

Good morning everyone, just posting up what followed me home from the dealer yesterday. Got the 3rd function remote, 48 inch LP BB, and backhoe. This is my first SCUT. Going to use it on the...

Hello all - Looking at a new BX23S w/ loader, BH and 60 inch MMM. was given a quick quote of 21, 250. I stopped in the dealer for a tractor part and inquired on the BX23S. Curious what you guys...

Hi TractorByNet. I have a good running BX23 with 450 hours. Was thinking of trading in for a L3301. The dealer who services the tractor threw out they go between $9500 and $11,500 without...

2005 or so BX23.... OE tires/wheels were Ag/Angled bar: front 18 8.5 8 rear 26 12 12 I want turfs for lawn care, from reading it seems current supply is same except larger front wheel front 18...

My service manual for my 2660 says 3.1 gal. Is the HST on the 23 the same volume? guess I had better pick up that manual as well.

I have a BX2660 and a BX23. I have had only dealers service on the 2660 and while I have had the 23 for a while it has had little use. I have the service manual for the 2660 and am going to pull...

As above... I have the print, but it doesn't have a wiring location diagram. I have 2-10 in. connectors w/o fuses, and 24 in. connectors w/fuse. I would rather find a protected place under/near...

Can I put BX 25 wheel assemblies on my 2005 BX23 with no issues? Not sure I can still get them but if nothing else I need to by new front tires before he snow flies. I am running the stock AG...

Can someone please tell me what the non-Kubota part number is for the blinker bulb? Kubota's part number is 37410-52720 20W. The bulb is stamped Stanley 12V 20W. It's a single contact bayonet...

looking for a bagger for my Kubota bx23

After reading the countless threads im still left in the dark as to which grass catcher/bagger will fit a Kubota Bx23. So if someone could please clear the air as to which bagger fits a bx23...

Kubota BX23 - fuel gauge failed - ran out of fuel - refilled and won't start. What is the proper procedure to bleed the system?

My radiator decided to start leaking at the joint for the top tank. Is another plastic/metal radiator all that is available for these. $300 is a little steep for a little radiator that is part...

I have a bx23 that I need a mower deck for. THe 2 deck models this tractor specifies are the rck54,60-2bx models But I see the bx2200 and the bx23 will take the same model mower deck, but I guess...

I've seen many posts here regarding replacing the propeller attached to the drive shaft, but none on replacing a broken propeller shaft. Mine broke inside the HST and I would like to know how...

Hello, I purchased a used BX23 with around 950 hours on it. I have used it a good deal to pull stumps and dig foots for a shed. I have been trying to remove the backhoe and the unit will not come...

I just got my BX23 back from the dealer, who replaced the HST unit, and now I find that it will not start/crank unless the PTO selector lever is in the Rear PTO only position (all the way...

Have an opportunity to pick up a used Land Pride DR 1572 inch finishing mower. Has anyone ran something of this size behind a BX? I'm sure it would struggle, but would love to hear any...

Hi. Was troubleshooting power loss on my BX23. It is the battery cable. But I pulled two main fuses to test continuity. They are on the right side of the engine bay, near oil filter at bottom of...

Hello all, I am new to this forum if skulking about is not taken into account. Just got a BX23 kubota and while cleaning it up, noticed that my HST fan has no blades. How serious is this for the...

Hi, I just got a like new 2750D snowblower off of Craigslist. Can someone tell me the correct parts that I will need to attach the snowblower to my BX23? I know one is the quick Hitch but does...

Newbie here currently in the market for a TLB found a 2005 bx23 with 940 hrs comes with mower deck, asking $12500 just trying to get a ballpark of pricing i feel this is a bit high. any input...

Hello, I recently bought a used BX23 with about 600 hours on it. The seller last had it serviced about 80 hours ago with a dealer at which time they replaced all fluids and filters. I found the...

I want to put snow chains on my bx23 turf tires--I cant tell if i need spacers or not, or if so, how thick. Anybody running chains on bx23 turfs without spacers?

Bs 23 will not start. Have power and it will start if you jump the starter. Think it is the lever switch. How do I check that for sure?

I recently purchased a 2005 Kubota BX23. It's not received the best of care, and the electrical system has had lots of "field modifications". It appears that essentially all safety switches have...

i have a kubota bx23. I had a hyd fitting leak. Changed the fitting. Was low on hyd fluid so I changed filter and oil. Now my attachments ( bucket , backhoe) will not work. They are very slow...

New it had to happen someday... my first BX issue. Started up the BX today for some chores and found the joystick would drift to dump with almost no effort. At first I didn't realize the loader...

Last night I finally hooked a hydraulic flow meter to the remote ports on the back of my BX23 with 750 hours on it. At full throttle, it's 3.75 GPM. The only references I ever found were that...

Havent been around here in a while but when my tractor started acting up the first thing I did was search here. The symptoms matched exactly the folks who found rusted fuel level sending units...

I am looking to add a valve to control a single ended cylinder by connecting to where the hoe normally attaches and has a bypass line connected when the hoe is not attached. I believe this to be...

A friend of the family has a 100 hour bx23 for sale, she did not mention price yet but I know its a older model is there anything I need to worry about with that model? Thanks IS there a older...

Hi could somebody post or send link with the bx23/bt600 hoe install/remove instructions. Couple of pages in owners/op man but can't find my orange binder with it wsm parts cd in it. durn thanx...

I have about 450 hours on the machine and it has recently lot power on the drive train. I had a heck of a time getting up a slope that It has been up many times without issue. Suggestions?

MY bx23 is having a tough time these days, seems i have lost all breaking power to the wheels, when i attempt to push into a pile the tractor will not break traction, the wheels will not spin...

Installed my new fan today. Every blade was gone off the old one. Went real well thanks to a post I read on how to do it. One hour from start to finish. This person said to use a ratchet strap to...

I have 2004 BX23 (I bought new)with 802 hours. When I start out from a dead stop and push the foot petal hard to go forward the tractor has a very noticable viberation or shimmie in both high and...

I'm looking to buy a BX2750 blower with a 2751 hitch on it. Don't know the number of the mid p.t.o. But I think the mid pto is too long - 14 7/8". The unit was on a model 2670 tractor. Someone...

I'm looking for the front axle pivot bolt nut torque spec, can't seem to find it and don't have a manual. The tractor has 796 hours on it and there's an intermittent/inconsistent clunk coming from...

I've had a recurring problem on a 2003 BX23 with about 400 hours on it where the engine will go into this mode where it runs very rough, and barely idle regardless of the throttle setting...

I found some of this on orangetractor forum. Some is edits from TBN members. 1520 - Tractor 628 - BH Backhoe 22 - 8 inch BH bucket 375 - FEL Loader 132 - FEL bucket _________________ 2677...

I saw used a used bx23 for sale on craigslist. Checked it out and it looks to be pretty clean and in good shape with the exception being the air cleaner bracket is broke. I know that is common...

I have a Kubota BX23. As I understand it the correct mower deck would be a RCK6022BX or a RCK5422BX. I have an opportunity to purchase a RCK54T23BX. Does anyone know if this deck will fit a BX23...

I have an old orange flashing light ( the kind with a rotating reflector) that I want to use on the bx roll bars when I am moving snow. Any suggestion as to where I should take the power from? I...

New to the forum, I've read a lot of good insight so far - Thanks! Little back ground first - small property but a lot of 'projects' over the next two years that a small machine would come in...

I have a BX23 and had to order new kits for the control valve detents. Not sure if that's the right verbage or not. But it's the things that screw into the bottom of the control valve that has...

I'm going to look at a BX23 TLB with about 300 hours on it. Looks good in the pics, but haven't seen it in the flesh yet. Seller is asking $12,000, which seems a little high to me. What are...

Many people here have recommended getting a BB for an upcoming BX2370 purchase versus getting a ballast box. The rear ballast is needed for the FEL and front mounted snow blower. Having a BB for...

I'm the trail master for the local snowmobile club and we currently use a walk behind bush hog. As a lot of our members are getting a little long in the tooth we are thinking of upgrading to a...

Just rolled over 1900 hours on my BX23, only things that ever broke were a result of operator error. Mr B

I have a BX23 that is loosing power after 10-15 minutes of use. Sometimes it is so bad that it wants to stall trying to move the tractor. 1. I replaced both fuel filters. 2. There is good flow...

Make a long story short my BX23 has been randomly losing power, then running fine again over the last year. Not much of a pattern to it just whenever it felt like it, but it got real bad last...

Curious if its common at all to get any seepage from fittings at all under extended use? I have a BX23 TLB (330 hrs) and have been using it pretty good for the past 3 weeks. I notice about 5-6...

I am new to the Kubota family. I just purchased a BX23 and so far love the "toy". I am stumped on the backhoe removal. I read the instructions and still can't remove. Searching Youtube and other...

I have a leak on my front axle I don't see what keeps the bearing and gear on. I disassembled it to change the upper bevel spindle seal and it stayed together. Did any one else have to change...

A 2005 Kubota BX23 with; 250 hours, bucket,backhoe, 4' Woods box blade (which I won't use), 4' scrape blade, 42" Woods bush hog. Tractor seems to be in great condition. I want it mainly for the...

I just purchased a 2005 Kubota BX23 with 250 hours. Needing a machine to relieve my back. I read the do's and don't's on different forums to educate myself as much as possible. Anyway, the seller...

I have an 04 BX23 we want to take to our property and leave it there for about 2-3 weeks a year max, the property is unimproved consisting of 13 acres or very rural land. I would like to get some...

Found this video of a BX23 with 2400 hours Kubota BX23 Takes a lickin', Keeps tickin' - YouTube

I am having numerous problems with the hydraulics on my BX23. Originally all the valve stems were leaking from the Nabco control box on the back hoe. I was told by the dealer that this happened...

Hello all. I was filling a hole today and jumped off the seat real quick to grab something and my Kubota BX23 died and now I cannot even turn the key to start it back up. I have checked the...

I just figured out how to replace the cooling fan for the BX23 transmission cooling fan. It should take an hour tops. You use a rachet strap on the drive shaft. Maybe someone already though of it...

Got just a fantastic deal on it! 335 hrs and annual service receipts. Hadn't run in almost a year, but it started right up with a jump and ran smoothly. Needed to pump up one front and one rear...

I have a BX23 and the three point hitch arms are stuck in the up position. Has anyone had this problem before? I bought the tractor used and just got the backhoe off don't know how long it has had...

I have a BX23 and the three point hitch arms are stuck in the up position. Has anyone had this problem before? I bought the tractor used and just got the backhoe off don't know how long it has had...

I damaged one of my front hub thread and bolt installing the wheel and need a tap to clean the threads up. Does anyone know the thread of the bolt? I am thinking 14 X1.5? TIA

I'm reinstalling backhoe after using three point lift and can't get hydraulics on backhoe unit operating to allow bachoe unit to mate with tractor. I've got the hoses connected and was...

Anyone have an idea of what a new seat for a BX23 would cost? I'm looking at one right now and the seat is shot. Thanks!

Hi OK I know I prob need to change sudt/filter. When below 20 F must have water in sudt as nothing works (3PT,FEL,STEERING,movement). Have bought a motor oil dipstick oil heater for SUDT dip...

Doing the 500 hour service on my BX2350 and while it was down I was also going to tackle the sudden stop problem. There was a thread some 6 months or so ago which described the cause of the...

Using the pictures provided by Messicks, I was able to change the fluids in my BX this weekend. Everything was where the photos said they would be and I was able to finish in about an hour. I am...

I have a BX23 8 years old with 950 hours. The muffler has broken out from the inlet end. I think there is too much weight for just three bolts. Has anyone come up with a home made clamp to help...

When I loaded the tractor on the trailer I heard a bubbling sound coming from the back of the tractor,what I saw was the breather was spitting out hydraulic oil all over. I stopped by the dealer...

My 3 point hitch lever has started to stay in the "up" position when I raise the mower deck. Usually when the deck reaches the top of it's range the lever would automatically return to center...

What would be a good price on a 2008 Kubota BX23? It has a FEL and a belly motor and appears to be in good condition and has roughly 220 hours on it. I am looking to see what a good ball park...

I can no longer crank my tractor. I can hot wire it easy enough by shorting the relay to the +12 volts. One of the interlock switches under the seat seem to be bad. How do I get to them. There...

I have been having steering issues with my BX23 for some time now. I have been dealing with the temporary loss of steering. Now, the tractor won't steer at all.Quit on me yesterday, I let it sit...

I tried searching the forums and found nothing on a BX23 steering problem as I will describe. I am not very familiar with forums so please steer me. My BX23 performs well at slow driving speeds...

The reason I'm asking is I've got a lot of fuel oil for heating purposes but I usually run a pellet stove. So far I've always been able to get gasoline and I run a EU2000i generator 24 hours a day...

My BX makes a clicking noise (sounds like a few pieces of gravel hitting the mower deck) for the first 30 seconds of run time when it's cold...After that the noise is gone...Doesn't seem to be...

Can Anyone help. I have a 2005 BX23 I recently have had trouble starting it. I've checked all safety switches and after reading som threads i decided to intall a relay bypass kit AM107421. My...

Hi all - I did all my fluids last year with major accessories off, and have only mowed and bagged since. It made such a difference in the transmission! Anyway, do not want to contaminate this now...

I joined to get any information I can on the 2004 Kubota BX23 that I am considering buying.

Lately I've been thinking of upgrading from my BX23 to something larger with more capability. I've been looking a little at the B3200 with backhoe and loader. Kubota now has the 5 year 0%...

I just purchased BX23TLB and started looking for mower deck. If you have one Ohio and states near I would like to know. Thanks

Hey everyone... I know that nobody can judge the quality of the BX23 I'm looking at, but I'm hoping to get some quick opinions on this deal being offered. It's a 2006 BX23 with 600ish hours. It...

Hey everyone... I know that nobody can judge the quality of the BX23 I'm looking at, but I'm hoping to get some quick opinions on this deal being offered. It's a 2006 BX23 with 600ish hours. It...

Hi I have a Bx23 and am looking for a box scraper. I found the above mentioned Woods model for sale locally used in nice shape. Is it appropriate for my tractor and what is it worth? Thank You! Paul

As alot of you know i have the weight of my cab ,loaded tires and ag tires so i should get good traction.The dealer where im looking at a used [once ]sundown box blade[5ft] said my tractor wouldnt...

I can't get the backhoe off my recently purchased used and "stored inside" *cough*BULL*cough* BX23. :( I have used the search and see this is not an uncommon problem but even trying all the...

I would like to buy a box blade to groom logging roads etc in my atv club.iM LOOKING AT THE COUNTY LINE AT TSC.Can i handle the 5 footer ok,mostly gravel roads and mabey an occasional parking lot...

Hi out there, I'm ready to change the trans. fluid/filter on my BX23...seems straight forward on my owner's manual....all, except the Transmission strainer, which is recommended to be removed and...

So i decided to take a look under my bx23 today and noticed my hst fan is obliterated. All of the fins are gone and judging by how old the cut marks are this happend a while ago, like a hundred...

first post to the website.......ready to change the oil for my BX23.....manual doesn't have actual torque value for the oil drain bolt.......I'd like to have that value and use my torque wrench if...

My '04 BX23's fuel guage is starting to act up...Sometimes when idling at drops to "E" then comes back up without any tractor movement..It sometimes does this while driving it as well... I'm...

Hi, new member here. I just bought my Dads BX23 with FEL, backhoe and mower deck. It's got just under 500 hours and I've started doing the maintenance that it needs. The air filter bracket is...

I bought a BX23 last weekend and it did not come with the three-point hitch. Based on searching this forum, I know the BX24/BX25 hitch kit will not work on my Kubota. I have located a complete...

Hi folks, I'm new to this site and am really enjoying it. You are all very helpful! I purchased a used Kubota BX23 and left the flashers running (all day) after plowing snow this morning. After...

Just got a BX23 but the seller couldn't find the 3-point hitch kit. My understanding is the BX24/25 kit is different and doesn't fit the 23, so I need the kit from a 23. Dealer price is ~$450...

I just had a pond put in and am trying to get the back of the dam seeded. The steepest part is 22 degrees. Going across it, I have found that when I reach around 12 degrees my inner ear starts...

Do they have a web site? I can't seem to find one! :confused2: Looked on Ebay! No Wallenstein. Wrong spelling of Wallenstein?:confused: Where oh where can I get one?

Can anyone give me any insite on changing my filters out? I think I pinch the line,then swap both filters out, turn the key on but don't start it,then loosen the injection line nipples off the...

Well, I finished my grapple and we are using it a lot as we clean up fence rows and a wooded area. We are also moving old piles of rotted wood chips and piles of composting leaves. I originally...

New to the forums, I'm looking to sell my Kabota BX23. I'm actually not sure what year it is and was curious what I should list it for on craigslist. It has 850 hours on it and has been well...

I had a BX22 in the past so I'm familiar with the limitations of the loader, my father has a BX23 and this morning I was over to help him remove his MMM. The easiest way for me was always to but...

Here is a drawing I made on how I plan to plumb the hydraulic lines to my home made grapple. (There are pictures of a wooden prototype that I made posted on the Build-It Yourself forum. The thread...

My wife said with a thread title like that everyone will think I am crazy. Let me explain my reasoning. While I own a welder, I am not a welder. I want to build a grapple for my BX23 but I wasn't...

The broad array of projects on TBN inspired me to try and build a brush fork and a grapple for our BX23. Here is the brush fork. The tines are 3' pieces of 3/4 inch rebar and they are held...

I have a BX23 and the HST light on the panel stays lit. I can't find any information in the operators manual on this. I think it is a thermo switch for the Hydrostatic transmission. I don't...

My BX23 is sick. I was back-hoeing a larger parking spot for a friend and when I went to use the FEL to move the dirt I loosened with the backhoe, the transmission wasn't up to the task. It was...

Tried doing a search and could not find anything on how others here replaced their fan belt on the BX tractors ... but how in the heck do you do it? It looks like you have to remove the drive...

I am contemplating selling my little BX23. Purchased new in 2004, it has less than 200 hours on the meter and has been stored indoors its entire life. Only real wear and tear is the paint on the...

I was able to solve the problem with the sticking 3-point hitch lowering speed knob. I now have a bigger problem and need your help. I removed the backhoe and I can not keep the 3 point hitch to...

I need help again. I finally freed up the 3pt hitch lowering speed control. That works fine now. I put on the 3pt hitch and a back blade. The problem is it will not stay up. I can move it up...

I have a BX23 and the 3-point lowering speed knob will not turn. Have any of you had this problem? It is the control below the seat, looking at the seat it is the control on the left. I could...

Hi all, I have a question, and I did try to find answer first.... In the BX23 HS ( http://www.tractorbynet.com/forums/kubota-owning-operating/109279-bx23-transmission-needing-replacement.html )...

Hey all - got the $14 gauge from Grainger and went to look at hookup pics (Tommu56?) and they're gone. I'm thinking... if I plumb it, Tee'd in line in the FEL, then operate a cylinder until...

I have a BX 23 TLB with a 48" Sitrex finish mower. I cannot get everything into my shed for the winter, so have to make a choice. My plan is to leave the loader outside on a blue stone patio, but...

Was just using my FEL when the up down lever jammed the bucket roll function (L,R on the stick) works fine but the lever will not move forward/back. The lock lever is in the unlocked position...

1. Pop plastic floor mat buttons to loosten rubber mat and remove the battery cover then clean (hose down) seat pan area under mat as well as other dirty parts. 2. Unhook battery - terminal (...

Bought a used (270 hours) BX23 and just put a Sitrex rear 48" finish mower on it. I was mowing a field yesterday and intermittently, the tractor would start to run very rough and feel like it was...

I amm tearing into mine to replace the propeller shaft boots. Got the seat, HST pedal, and mat off. How do I remove the cutting height control dial and the 3pt hitch lowering speed knob...

Know this subject has been addressed again and again but I still haven't been able to get my head wrapped around it yet! I tore the propeller shaft boot on the engine end. I got the new $2.00...

I just bought kubota bx23 with 298 hours and it had no leaks. But now after putting 14 hours on it is leaking fluid. I was going up and down a hill with dirt, working hard I guess. I have look...

I just found a 2005 BX23 with 265 hours for $10,000. The guy didn't give it much love, basically just greasing things, changing the oil, and filter and recently installing a new air filter. It was...

Local dealership gave me .25" fuel line. Now that's got to be the wrong size. What size should it be and where do I get it ? Also, does anyone have any suggestions where I can get small screw...

Well after seeing all of the trouble that this little fan causes when broken I had a few made from NYLON thicker than stock and with a outer support ring to make the blades much stronger. What do...

Anybody ever heard of this? The local dealer says it's a BX24 tractor by serial number. They explained that they thought it was probably ok as the engines in a BX 24 and BX23 are the same. I...

I was wondering if anyone knew if the the front wheels off a BX25 would fit the BX23? The BX23 are 18X850X8 and i believe the BX25 are 18X850X10. Thanks Mark

Just bought a 2005 BX23 with 267 hours that was not treated lovingly. I wanted to take the BH off (evidently for the first time) and followed all of the instructions in the manual. When I got to...

Hi all I am trying to trade in my BX23 and implements on a new B3000 and rtv1100 (yeah, I'm really into the cabs now!), and I was surprised how little the dealer offered me for it. The BX23 is a...

I have a BX2750 snow blower I am purchasing. It has has a bad sprocket drive. The bad parts are: sprocket chain and driveshaft / sprocket. Kubota parts didn't show one of the sprockets. Are...

When you remove the backhoe you have two hydraulic lines on the tractor. One is male one is female. Is there any reason not to connect them together to keep the dirt out ? I'm talking about the...

i recently purchased a Kubota BX 23. I would like to pick up a single bottom plow for it. Does anyone know if a Brinley plow designed for an older cub cadet can be adapted to use on this tractor?

Hi all - I have the above (and a newly level tractor from tire repairs). I now can confirm that the vacuum assembly wants to sit low to the right side where the offcenter weight is - on the...

I was using my BX23 all day, york raking, and all of sudden it stated sputtering. touching the treadle (to go forward) made it sputter. I figured it was fuel starved so I lowered the throttle very...

I have a Land Pride York rake which is going to be sold with a John Deere 950 tractor. I tried it out on the BX23 (whose front wheel drive axle is currently dead). My 1200' driveway is quite hilly...

I think the left rear wheel is tight. When I jack up the tractor on the backhoe and shut it down and and put it in neutral the left wheel is very hard to turn where as the right wheel is easy to...

These are the 6' models: Sf2566 230# scarifier, LR1572 260# rake, and wheels. I own this and I was going to sell it with my JD950, but I'm wondering that it might work with my BX23 and I'm...

I'm interested in a back blade for crowning my gravel driveway. I can't find a back blade which can tilt. That is drop the right hand side and raise the left hand side. Does anyone make a blade...

BX23 front drive shaft needs repair. Any ideas ? I have no front wheel drive. Everything looked fine except for the end of the drive shaft which connects to the transmission. The transmission...

My BX23 goes up hills ok but when I was using the FEL it would stall without the wheels breaking out. This seems strange to me. It has 1300 hours, and was just through Kubota for inspection...

Any help is cool need to remove engine cover BX23

People seem to like the BX23. It seemed only to be produced from 2004 to 2005. Then BX24 production started. Many like the BX23 because there is more metal.

Can I buy a Kubota snowblower for the BX23 from Kubota new ? Does anyone know the price ? I'm trying to close a deal which today which is why I'm not just calling a dealership.

I was going to buy a 5' Countyline Rotary Cutter for my Kubota BX23 but wasn't sure if it would be to big for it. How do you folks feel?

Is replacing the left wheel rear seal a matter of pulling the wheel and replacing the seal on a Kubota Bx23?

I got a BX23 last year and it came with a mower and brand new turf tires (with rims). As much as I would like to try them out I still don't have grass--I'm still playing in the dirt. :) I plan to...

My bx has been dripping oil out of the crankshaft seal behind the flywheel. I finally got tired of cleaning up after it. Pulling the flywheel did not require a puller, BUT be sure to mark the...

Does the TG2754 front blade fit on a BX23? Looking at a used one that was on a BX2200. Not sure what they cost new. this one is $550.

Hi, Does anybody know what the diameter of the bolt hole pattern is on the rear rim of a BX23? Thanks, Rob

Ok I gone and done it on my BX23. Between the mud, sticks and ? the wires for the rear lights/turn signals got a bit messed up along with my fuel gauge has stopped working. Ok pulled and ripped...

Like many others on this forum, I've wiped out the HST fan on my Kubota. The removal of the old fan went very smoothly since I didn't have any blades to get in the way. I need help now with the...

Hello, Haven't been here in a while. My BX23 has been acting up lately with it idle, doesn't matter if it's cold or fully warm up. Yesterday, after completed the snow throwing job, I went and...

I found an ad on Kijiji 2004 BX 23 with bucket, and attachments for $2700 Back and forth with the seller a few times and alarm bells are ringing. She says she is recentley divorced and just...

I was copying my serial Nos. and such down into my manual for my BX25, and the engine had "D902-E3" and said BX23, instead of the "D902-E2-BX-2" that was printed in the manual. What gives?

I'm checking out the log splitter from NorthernTool. I was just wondering if anyone had any experience hooking this up to a BX23 and what I might need or run into? Thanks!!

I know this is redundant, but wanted to help out anybody who is using the search furnction. After 800 hours of abuse and plenty of flat repairs, my front tires are shredded, one wheel is dented...

I bought the BXpanded work lights and I can't find the connectors that are suppose to be behind the left tail light on the bx23. I opened up the conduit that the wires are in and as far as my...

Does anyone know if there is a good aftermarket sand bucket for my BX23? What I mean by sand bucket is a wide (24" would be good) but short toothless bucket for backing up to ditches and cleaning...

Hi all, new poster here, looked around and couldn't find answer to my specific problem. Have 2004 Bx23 with 800 hrs which I beat to **** and just keeps going. Aside from air filter support and...

I was surfing through some forums where one guy had posted this: "From a review I was able to find, a Kubota BX23 tractor was able to pull 750LBs in 2WD, 1420 in 4WD, 1760 in 2WD w/ 600LBs of...

I come on bended knee, seeking the wisdom of my fellow TBNers: Looking at a BX23 with LA210 Loader, & BT600 backhoe. It's a 2005, 317 hours and only used with loader/backhoe digging trenched and...

Recently I've noticed that my BX23 shift/speed lever won't go all the way into high gear (rabbit). It goes about 1/3 of the lever travel and stops there. There's nothing in the way of the linkage...

I've pretty much decided to get a rear mounted snow blower for my bx23. I saw a few threads that said how nice cruise control is with a rear blower. Can a cruise control be added to a BX23? Thanks

Today while moving brush got a stick caught up in the HST fan. Some interesting sounds and white plastic fan blades on the ground. Advice on replacing this fan much appreciated. Thanks

Is there a point for BX23? A rough measure (the drive/parts are tight in there) makes me think all the wheels have '0' offset (plate/flange in center of rim). Am I correct? THX

Hi all new to the form lots of nice info, anyway I believe I am going to purchase a BX23 with all Bucket, backhoe, belly mower, scraper 12K. I have a acre to weed and landscape also I have some...

Hi i am looking for a removable cab for a BX23.Doesn't have to be new,just in good working shape.

There is a used rear mount snowblower for sale that is pretty reasonable. Six feet long and 30" high. The person selling it does not know the make and model. came off a ford and is blue so I...

Well I finally got around to driving into the creek. (sorry no pic) In the tall grass as I was turning around I drove straight in about four foot deep with two ft. of water. The back wheels were...

My neighbor has has decided to move an has BX2350 that he is going to sell. It has a front-end loader~box blade an a RCK60B-23 deck. It has 721 hours on it an garage keep when not in use, a 07...

I bought a BX23 last year specifically to use the MMM. My two acre yard was too large and steep to safely use a regular mower. The tractor also included a FEL and BH. I figured at 22hp it should...

Hey all, looking at a used BX23 for $15k. I just want to make sure (at least I can tell my wife) that I could resell in a year after a bunch of projects without losing too much. What do you think...

Beginning to look for a tractor. Just bought a house on six acres. Will have 300 ft. of gravel road to maintain. Will also be putting on an addition - will have to excavate about an area 25' x...

I just did a search here and found the following info....Does anyone have anything to add? My Kubota dealer is a 2 to 3 hour round trip:(...my Wix & Fram dealer [ auto parts] is 20 minutes round...

My first post, just registered today!! BX23 range shifter-sticks in low, and the flimsy lever bends like crazy trying to pull it back into neutral or high...About 300 hours on our BX23 and the...

Can someone tell me what mowers besides the RCK54-22BX and RCK60B-22BX will work with my BX23 Kubota tractor? I would also like to know where I might purchase one of these mid mount mowers and...

I have just started using my BX23 and am enjoying it except for: - poor brakes - can't get it started right now. However I am following a thread here that may help me (neutral switch)?

Hello,I just bought a used Bx23 Kubota Was out back Playing around and noticed the 2 pins to remove the loader are frozen solid the carter pins are snapped and 0ne of the pins shifted about 1" I...

Hello, I was wondering if anyone had tried installing cruise control on a BX23, now that the 24 & 25 have them, OR... Would it be better to use the seat belt slot and try the 2230 cruise...

I have tried every depth setting and it will only go down about 2 inches. That means my grass is 5 inches tall. Please help.

Hi all, I own a little BX23 which I loan to one and all. I am a single woman and I've found that the more helpful a person is, the more help you get in return. I loaned my BX23 to a neighbor...

Which would you reccomend? They are basically the same hp and specs. different color.

Hi everyone. My BX23 was serviced in the late fall and was running great. Used it during our last big snow storm in December and it sat for most of the winter. The BX23 starts right up and runs...

I wasn't payin enough attention and bent the lower edge of the loader bucket down about 1.5" in the center, can't seem to get it back to straight. Any suggestions??

Most snow I've moved with my BX23 in the 5 years I've owned it. Just came in from plowing 6 to 7 inches off the driveway with the FEL. Had about 2 or 3 inches of solid ice in several places. Have...

have a bx23 great little tractor has front loader and back hole spec says the bucket will lift about 460# can the hydraulic presure be increased I would like to be able yo lift about 650# I have...

Well I have had a BX23 for a while 310 hours and have replaced the outer air filter several times. Where is the inner air filter and how often are you supposed to change it?

I have the ability to purchase from a Kubota dealer a BX24 (LA243 loader & BT600 backhoe) that has the updated plastic and between a BX23 (LA210 loader and BT600 BH). Both tractors are under 100...

Hi - I was chatting in another area (about generators and shaft speed regulation), and they said tractor throttles were effectively self managed as to load and rpm. Would my/our SCUT's have a...

Hi folks, 1st post, been lurking a while. Couple of BX23 ?'s A. The book shows the 3PH right hand Lift Rod End (attachment to the hydraulic lift arm)at an awfully strange angle, something like...

I have a BX23 with 1400+ hours. I want to replace the tires. I'm currently running the OEM lug tires. Does anyone have a comparison between the lug tires and the R4 tread design? I know the BX24...

Does any one have an electronic copy of the GCK60-BX Owners Manual (BX-23 Grass Catcher)? I just bought a used one and want to hook it up? It looks simple but I would feel better following the...

Anyone had the threaded rod bend going into the top link on the 3PH? The threads are barely exposed on either end, but it's bent and jammed in the assembly. Happend using a landsape rake, nothing...

i know the cat 1 implements w/work but how about the backhoe, undermount grass cutter, grass catcher, snowblower w/powerlift. I'm thinking not but you folks would know better than I. I'm...

BX23 HYDRAULICS SUDDENLY FAILED PLENTY OF FLUID NO BROKEN LINES MOWER LIFT IN NUETRAL WAS SERVICED ABOUT TWO WEEKS AGO EVERYTHING WORKING FINE FRONT BUCKET WILL WORK VERY VERY SLOWLY BUT MMM AND...

For you BX23 owners out there, I have a question regarding the float position. I realize on most tractors that have the float position feature when you push the joy stick up into the float...

my bx 23 fuel guage doesnt work. I believe it is in the sending unit but i cannot locate it.

I am new to the group and this is my first post. I did allot of searching but nothing on this topic. I've had my bagger now for about 2-1/2 years. The hoses are cracking and pretty much shot...

Just need a price check on the following; 2005 BX23MLB HST KUBOTA LA210-1 and backhoe is a factory KUBOTA BT600. 283 hours...don't know if ags or turfs Thanks ericher69

Going tomorrow to look at a 2005 Kubota BX23 with front end loader, backhoe, 5' landscape rake and disc. Asking $13,800 It has 300Hrs on it. Is that a fair price? I know the BX line...

Anyone know where I can get a FEL toothbar for a BX23. The standard ones are 48" ID on the BX bucket is 46 3/8 ID. I know I could cut and weld, but I'd like one that fits correctly.

By now I think I realize just how different BX23 rear end from the rest of the BXs is. Two questions Where do I get the correct top link? What else is different on the BX23 with respect to...

I searched to no avail and I currently do not have an owner's manual. pic (from BX24) attached

I have a Wallenstein BX42 chipper. When I engage the PTO, I first bring the engine speed to idle, engage the PTO and then raise the engine speed back to full. The flywheel in the chipper is...

YouTube - Backhoe Thumb1 Extreme Metal Products,LLC

Was operating the tractor a few days ago - all was fine. Shut it off to some things and when started and pushed the pedal forward it was like the parking brake was on. Checked and it wasn't. It...

We got a Bx23 with loader and backhoe from a relative and I can not get the front bucket to dump. It will raise and lower but not tilt. Any help

Hey guys, first post here...about to become an owner of a BX23..very excited, but have a concern. The tractor currently has a front blade and what I think is the mounting point for an FEL called...

I've owned my BX2660 for almost a year now and have educated myself (with your help) about tractors in general and Kubotas in particular. I'm currnently looking at a low hour BX23 that is at a...

There is a backhoe for a bx 23 on the pensacola craigslist for $1800. Looks like it might be a good buy for somebody. I don't know them nor I have I seen it so I can't give you any info on it.

Could someone that has done the alternator upgrade check the new one for a Denso/Hitachi/Etc. number so it could be cross-referenced? I would like to do the upgrade, but with a job on hiatus...

Can any one check these dimensions for me? http://www.tractorbynet.com/photos/data/500/BX23_BACKHOE_MOUNT_DIMENTIONS2.JPG and...

Hi, A little help please. What are the differences between the BX23 and the BX24. Thanks, RTJ49

Is a 5' Bush Hog going to be too big for my tractor? I've done a lot of searching through the archives (and Google), and it seems there are a few people running them. But I have to wonder if it's...

I have a BX23 with about 500 hrs. on it. I use the backhoe and loader mostly to dig ditches and move dirt. Here lately, when the backhoe or loader bottoms out...say at the end of a lift, or if...

With factory FEL and BH. Comes with 3ph. 283 hours looks mint....what would be a GOOD price on this machine

I'm in the process of purchasing a used BX24 and will be picking it up Tuesday. I also found a snowblower being sold that fits a BX23 but am not sure it will fit a BX24. We (snowblower owner and...

This may have been asked before, but is there existing wiring near the ROPS for a rear work light?...If so where is it...I really don't want to run a bunch of wire if I don't need to..And does it...

Has anyone thought of extending the lenght of the arms on the loader of a BX23 to get more height? I need to get 8 feet if possible to load the truck. It looks like it might be easy to do by...

I have read here the hyd pressure for the BX 24 and 25 is 1849psi and would like to find out for a friend if the BX 23 is the same. We are thinking of checking his also. Thanks.