I know the comparisons get done to death, so please bear with me. Upon pricing, I have been shocked to find the JDs are less expensive. With that said, I can buy a JD 3038E for $1300 LESS than a...

I ran into a few errors in the supplied instructions when installing the Kubota rear remote valve kits on my L3200 a couple weeks ago, and thought I should pass on that information in case it...

Hi gang. I've come here a lot as a result of Google searches but have never found a need to start a post until now. Been a rough weekend here. Put in 2500 feet of buried dog fence wire using a...

I was all set to copy number9L's sweet looking install on his L3800 (same tractor as mine, just 6 more HP) until he came to the realization that his valve stucked. At any rate I liked the concept...

Hello, My name is Hamza and im owner of the Kubota L3200 2012 year. I bought it few weeaks ago and i love it but i have a problem with it !!! When i bought it it didnt come with front loader so...

Been thinking about upgrading my manual L2250. Just came close to buying a 2010 L2800 HST with 450 hours, but figured the asking price of $14,500 was a tad high and the seller was not willing to...

After lots of research, hemming and hawing, and a little bit of second guessing, the new tractor arrived this morning. We're getting the monsoon treatment right now, so it needs to dry out a...

If anyone has been told this please share. Ok so here goes the story. Bought the tractor brand new in Feb I think. After about 7 hours the tranny fluid was low so I added so SUDT2 fluid. At 40...

Well, I'm about to embark on a tough job. I live atop a mountain in Alabama, and our local Cable provider will only provide cable service (High speed internet) if we pay for it because we are so...

I am thinking of buying a new L3200dt 4wd with front end loader. I was wondering if the 4wd is selectable or all time, also can you lock the differentials?

So I think I have narrowed down my choices to one of these two tractors. I currently have 3.5 acres that I need to complete some landscaping on before putting it up for sale and just purchased 2.7...

I am trying to decide between tractors. One is older....and dealer just serviced it to tune of $5000.... new clutch and axle seals and a bunch more the good thing is he is sticking to his price of...

Well after much thought and lots of looking, I decided to put the L3200 up for sale. Within a day I got my asking price and the tractor will be picked up tomorrow....The l3200 is a very good...

Can anyone tell me which is the better tractor of the 2? what does one have that the other doesnt? my computer wont let me bring up the specs on kubotas site.

I am seriously kicking tires and thinking about upgrading from my L3200 to a Grand L open station tractor. I had sort of decided the L4060 was about right, to get a notable increase in power and...

I have a L3200 on order with B77 hoe and 524 loader. Dealer did not have anything for me to measure! I would like to know if it will fit on a 16' lift gate trailer? I would back the tractor onto...

At this point I believe I have decided on trading up to an L3200, HST. My main uses will be clearing and digging work, ie., FEL digging and hauling, dragging my 6' boxblade and rake, pulling a...

Hello all, I have done a lot of research, and I think am on the right track, but I want to ask the experts here before I order the wrong thing. I currently have hydraulics for the three point...

I have been wanting to buy a compact tractor for several years, and I really spent a lot of time looking at them and reading about them the last two years. I guess it became an obsession for me...

Have a 2014 L3200 tractor with less 200 hours and a BH77 that maybe has 5-7 hours on it. When I ordered the backhoe 8 month ago from the Kubota dealer I was told that the l3200 and BH77 with a 16...

I'm so bummed. I've loved my Kubota since I bought it new a few years ago. I don't use it enough, and it mostly sits (only 41 total hrs). Last year I noticed it would sometimes require tapping the...

I have about 15 hours on my new machine (much with the backhoe). Absolutely love it!!! But, if I use the backhoe continously for a while (45 minutes +), the cylinders get very hot - so hot that...

Well I am a new owner of a pre-owned Kubota L3200! It had .9 hours on it. Yes .9. It was purchased in January 2014. I was ready to pull the trigger Saturday on a new L3301, when I got a call from...

Hi Guys, I've had my Kubota a couple years now and I love it. I was mowing my brush last weekend and I noticed the temp gauge was nearing the red so I shut her down. There was still antifreeze in...

I would like to install a block heater in my 2011 Kubota L3200 HST. I have read installation instructions, but I am nervous about removing the middle frost plug. It is not a threaded plug. It...

Has anyone gone this way and wished they had not. I like the looks of the L3200/3800 and wonder if I would be happy with the switch or wish I had kept the B3200 for its size. I like the idea of a...

Just sold my JD 850 gear and purchased a new Kubota, did some extensive research comparison between the JD and Kubota before making my decision, just wanted to share some of my observations...

Hello everyone, First of all .. i'm a newbie in the Farm world. :) My Wife and I just recently built a house on 10 acre lot in Northern Indiana (Middlebury), I'm looking to get a nice reliable...

I am in the market for a used L3200 HST FEL 4x4 or a new L3301 HST FEL 4x4 Kubota tractor. I have been searching for a used tractor for a while now and the prices I am finding seem to be just...

I'm in the market for one of these tractors, but can't decide. I like the PTO in the 3400, but I see the 3800 replaced it. So I guess the 3400 is obsolete now. I can get either one from my...

Hello, New member here. I just finished cutting the ears off my pin on bucket. I have a bracket I want to weld onto the bucket. What I need is to know where the QA bracket is on the L3200 or...

I recently built a 3rd function for my L3200 in attempt to save a bit of money over the wr long kit. I have right around $450 in it including the John deere joystick. Everything was ordered from...

I have been researching tractors to purchase and continue to be directed to TBN and have found the posts very helpful so I thought I would join and see what you all had to tell me. I have a 2...

Thanks to all for posting your thoughts and opinions. I have been a quiet lurker for a short time while trying to figure out what to purchase. After a short debate between the L2800 and L3400...

L3200 4WD HST INDUSTRIAL TIRES 4 Front Weights + Bracket What is the best price anyone have seen for a setup like this?

:cool2: I've pulled the trigger on a brand new Kubota L3200 HST with the FEL and a Landpride RFC2060 brush cutter with the flat top and optional chains for guarding against kickouts. I wanted to...

I just purchased my L3200 on Friday. But I couldn't help to notice the missing right side fender handle that comes standard on the Grand's... I'm pretty sure it's saving money related, but I don't...

Have a new L3200. Is it normal to have to use your foot to get enough pressure to disengage the 4wd?

I'm looking for a tractor in the range of a Kubota L3200 with a loader. I'm tax exempt on this so there is less to be saved if I order one from Barlows. The dealer I'm talking to right now has...

I have a 10 year old Kubota L3200 and the battery barely cranks in cold weather. I’m fact, it usually doesn’t start without a jump or fast charge. After 10 years, well, that seems like excellent...

The plastic hinge broke and then today I lost the lid. I'd like to get something a little bigger. I like Pelican cases but they are probably too deep. Suggestions?

Is there a comparison list between Kubota's B and L offerings?

After lots of shopping around and considering other brands, it ended up being a Kubota to replace the Kubota. The new one is an L3200 / FEL / 72" RFM / Filled Tires. 10 years ago the little Ford...

Hi everyone, new to the forum. I am looking for some opinions/advice on a tractor purchase we are making. A little background, we have 35 acres in south Georgia that we are cleaning up. We have...

I have a Kubota L3200 I'm generally happy with, other than getting frozen when plowing/blowing snow & getting covered in dust & pollen in the summer. I'd also like some more bells & whistles over...

I am looking at the B3200 with FEL, HST, and BH, quoted $25950 whereas the L3200 with the same was $26450. I was wondering if these prices were a little high as they seem to be to me. Also other...

I was going down a short hill maybe 30% grade in low gear when my tractor started speeding up with no pedal input. I think it was in 4wd. The fel was on but unloaded. Nothing on the 3pt. The...

Anybody out there able to give me a quick answer as to the difference between an L3200 and L3240? I am offered an L3200 (new) from a dealer for 18,500 - good deal? It has a FEL but nothing else...

Please pardon my hydraulic ignorance :confused: . I have read everything I can find on adding a third function. I am attempting on using an open center spool for a grapple attachment. I know...

So I've decided to add a FEL to my tractor. This decision comes after not being able to sell my tractor in time to purchase a NON-Tier 4 engine Kubota. I'm stuck between two brands of loaders, the...

Well somebody at Kubota should be ashamed. The itty-bitty depth preset knob for the 3-pt. lever on the L3200/3800 is, to put it gently, a JOKE. They might as well have left it off as it's not...

Does anybody know of a source to get the pin type stablizers in place of the turnbuckles for my L3200. Is there any similarity between the Grand L. It is getting to be a PIA to loosen and...

Has anybody used the BORA wheel spacers. I can not find any guidance on how to install them. I have not heard of any complaints or issues with them. ? for the group- Will Aluminum spacers with...

I'm looking at Kubota L 3200 and 3800s and was wondering what Mahindra had in this hp and size tractor. Also Id like to here what you owners think of Mahindra? Thanks for your help.

I am looking at a new L3200 and wandering which attachments are a "must have" and which ones are a "nice to have". This will be my first tractor so any help would be appreciated. Please let me...

K dealer quotes 17.4K plus tax for the L3200 HST JD dealer quotes 17.3K plus tax for the 3032E, but includes Frontier RC2060 rotary cutter These seem to be the going rate. Are there better deals...

I recently purchased a used Kubota L3200 (manual trans 4x4) and am looking for a brush hog. I am going to go look at a used Brush Hog model 295, which is a 5ft wide model and from what i've read...

my l3200 won't start, at first I thought I ran out of fuel, so I've done all the normal things you would do, this has a valve you turn on the injector pump you open and supposedly you crank with...

I just bought a used Kubota L3200 from one of our friends. Has 80 hours, in great shape, has hydro trans. He did not buy a loader with it. I can't live without one. I checked with the local...

Does anyone have any insight about the 2 models. I don't see a big difference in the capabilties looking at the spec sheet for each, they use the same BH. The FEL has a bit more lifting capacity...

I'm not sure what all models have the same arrangements. I have the new L3301 which I believe is nearly identical to the L3200. I've come to the conclusion that the designers made an error when...

Havent heard to much on the L3200, interested in the model was wondering if there are any owners out there yet? :cool:

I just bought my first tractor. It's a L3200 HST 4x4 with FEL. I've only used it for 6 1/2 hours so far but it has been great every minute. The HST is nice love the 4x4 really glad i got it don't...

Is the position control feature in the L series worth the price bump from the B2920? Using the machine to mow and move stuff around on 11 acres with some hills. I also see the B2630 has the...

Thought some of you guys might enjoy a video on the features of the new Kubota L3200 and L3800. It compares it to the older L3400 and the John Deere 3038E. Enjoy. All New Kubota Standard...

I would like to hear some success stories with a front mounted QA snow blade on a Kubota L3200 (or similar tractor). I currently use an 84" three-point blade but it does not handle the deep snow...

This is rephrasing the question from my other thread: Regarding L3200 HST power and loader work.... L3200HST OWNERS: how much weight do you carry and do you find yourself wanting more power...

Hi. I've been looking on the forms for awhile and finally decided to join. Im in search for my first tractor..tired of borrowg from family. So I've been looking for several months now and I've...

I sold my B7610 on craigslist and moved up in size to an L3200 HST. The B7610 did everything I asked and was a great machine, but I knew I wanted a larger tractor with more capabilities. I...

Greetings! I'm new to tractors but not new to mechanics/fab or forums. I've been searching and reading for days but I'm still left with a few questions. L3200 HST 1. Does anyone have a pdf...

I am thinking about a top n tilt kit for my L3200. It has the FEL but no rear remotes. Are there part numbers for for the rear remote options and the top n tilt kits from Kubota? I want to...

Well since my lift jerk has been fixed,I've actually felt like adding my goodies to my L3200. Added a new Front Guard with weights (weights i made), Stabilizer Kit for the 3pt hitch, and installed...

That's the question. Does anyone know if the 463 loader and sub frame-mounted backhoe from my L2800 will bolt onto a new L3200 or L3800? I want HST and a live PTO for easier lawn mowing and dirt...

How and where can I find a new BEZEL for the dash or how to repair the plastic cover on the dash of a 2014 L3200? A young man had an "incident" involving a dropped ratchet now we need to repair...

I have 2 quotes and regional price factors make the actual amount not relevant. The delta is $1818, L3800 over the L3200, both are HST. The only real feature difference I can find is the horse...

Been having trouble getting my tractor to turn over. Once I got the forward/reverse foot pedal stomped into the perfect position she fires up in less than one roll over. Today I could not for...

I just bought a Kubota L3200 with loader and landpride 5' rotary mower. It makes a loud noise when driving it, I compare the noise to a "hog being killed". Sometimes it goes lower, and then up...

My dealer wants 1K for a Wr long valve install plus 300 for delivery/ (9Miles) I have identified the power beyond and dont really see it as difficult ? Has anybody faced this recently ? I am...

I'm looking to get a L tractor have wanted one for years and perhaps now is the time considering the $2k instant reduction have two options and could use some help on deciding or negotiating...

Just found this forum and want to say Greetings to all! :) Just approaching my 1st anniversary of being a tractor owner. Bought our Kubota L3200 last August and got it delivered just about 365...

Hummm...changed the UDT on mine this weekend...drained about 7 gallons...new filter....added the prescribed 7.3 gallons, and still no level in the sight window....yes sitting on level ground. She...

I put rear remotes on my L3200 over the weekend. Other than one hiccup with errors in the Kubota instructions (see...

Any suggestions on a nice OEM looking location to install a switch for some lights I'm about to put up in the ROPS bar? I have a L3200 & plenty of wiring skill, so mostly just looking for cosmetic...

I am planning on buying a Kubota 4x4 3200 (32 HP) 4X4 for my GA hunitng property. The dealer sales rep recomends to me a "EH16 5 foot 5 inch Adjustable Disk Harrow". Will this 32HP 4X4 Kubota...

I'm having a hard time deciding on a new tractor. (size and brand) What I would like is a tractor that compares to my current Mitsubishi MT250D. It weighs around 2000# and has a 5' FEL. I have...

I am a little confused with the transmission on my L3200 HST (2012 model). Is it at 4 wheel drive all the time? When the front wheel drive lever is engaged, does the tractor become 4 wheel drive...

I noticed a lock bolt came out and the pin started to back itself out. Here's a picture of the other side, where there is an OEM bolt with a nut on the bottom. Any way I can find out the bolt...

Newbie here. Just a simple question. I have been pricing tractor/FEL/BH from the B2620 up to the lower L series. With the combination of cash and rebates, the local dealer gave me a quote of...

My husband and I have been looking at buying a new tractor for our 8 acre horse farm and have pretty much decided on the Kubota L3200 HST 4WD. We mostly want it for moving small (4' x 4') round...

Looking at these two tractors. Please give advice on which is a better tractor in the long run and which will have a better resale value say 3-4 years down the road. Have 2+ acres to mow. Main...

I just bought a new L3200. This is my first tractor minus a 10HP john deer lawn tractor. Is the owner's manual serious about babying this thing for 50 hours? What can and can't do? Thanks Joe

Hi everyone. I have been reading on this forum board for sometime and I love all the knowledge and advice. Now my question is will a L3200 with a hydro trans and R4 tires pull a 2-12"bottom plow...

The O.D. of the hose measures about .600 but I am told that it's measured/ordered by the I.D. I'm adding a 3rd function for a grapple and thought I would use the same size as the FEL hose. Thanks...

I went by the Kubota dealer and was kicking the tires, The L3200 and L3400 tractors had my attention. I am thinking of replacing my trusty B8200 gear shift with a new HST that has power steering...

They are basically the same tractor, except for HP. Can a 3800 really "do" that much more? Does the extra HP help the tractor do any more? I know that you get more power out of more HP, but on...

Nubie here, Went to the local fair the other day and walked into the Kubota display. Spent some time with the sales staff, and ended up with a L3200Hydro with the 524 loader with 66" quick attach...

I am onsidering buying a Loftness 721L (6') snowblower to use behind my L3200. The blower has been stored outside and therefore it looks cosmetically rough. It doesn't look bent, banged, or...

I purchased 7.5 acres of unimproved land in Aug 09 and had a buddy bring out his big kabota of 72hp out and make a path/ driveway and 2 1/2 acre clearing spots which I covered all his diesal from...

I'm looking into a new tractor (first time owner) and considering the L2800 and L3200 (4WD HST for both). Is there a summary of the differences between these two models? I have read the...

I mentioned my brother got the tractor bug and was zeroing in on a L3200 hst with backhoe for his 65 acres. Last Wednesday, he made a Saturday appointment to compare/buy a 2013 L3200 or B3300...

I plan to get spacers for the L3200 so i can mount chains. But the aftermarket ones offer spacing from 1.5 to 4.5". What is the spacing for the oem spacers? Anyone know what they cost?

Hi Guys ; Took delivery of new L3200. Checked everything on delivery except 3 point. Went to use it today and it will go down but not up. However if you roll the bucket (left) the 3 point...

Purchased a used L3200 in July which was equipped with R1 ag tires. Most of my land is hills and it feels for lack of a better term Tippy to me. Called dealer and set of R4 tires and wheels are...

I have been looking at tractors for a while and decided on a Kubota 4WD I just can't decide between the l3200HST and the l3800HST. I will be using a 5' cutter and a 5 1/2' 16/18 disk. The question...

On the gear drive model what is the difference between the way the 2 PTO work? Would the L3200 work with things like pumps or a PTO gen set, tools that are PTO driven but do not require the...

I have an L3200 and recently changed oil and the oil, fuel and air filters. I found a 'how to' video on YouTube showing oil change on a L3200, but I can find no information on the fuel filter...

Hello! my name is Chuck (a.k.a. Pappa Smurf), and I'm a tractorholic! Seriously though, I'm a proud owner of a Kubota L3200 with loader and BH 77 backhoe. I own about 6 acres of land in the...

Hi Folks, Wondering if an 18' (16+2) beavertail trailer will be long enough for the L3800 with 524 loader and Land Pride 1860 (5') bush hog. The trailer I'm looking at has the vertical ramps that...

Kubota L3200 HST, 32hp, I think its running 3,800 lbs with the loader on & R4 tires filled. I've been keeping an eye on Craigslist for a bit on 3pt disks & getting ready to actually go hunting...

Had another thread on this site here but ME thinks it went dead........I went ahead and bought the L3200 with FEL and had the chance to cut my 9 acres this past Saturday with a 6ft Woods mower I...

Rarely to I run my L3200 over 2500 rpms. Tac goes to 3200. If I am pulling a load or bush hogging how many rpms will this little tractor run with out damage? tks, CB

I want to remove dash to add switches for LED's. I can not figure out how to remove dash. I've removed two bolts that I can see one top center and one bottom center, can't find any other bolts to...

Recently bought a 2013 L3200. Going over owner's manual and hitting the grease fittings. Manual says there's a fitting on each end of front axle labeled "front knuckle". This tractor has threaded...

The LA463 and LA524 are very similar in specs so I suspect there will not be a noticeable difference between the two in actual use. Since the LA463 fits the new machines and is so close in specs...

My wife and I are new at all this. We were raised in the city but our daughters got us into horses 20 years ago which has led to us buying 20 acres that we are developing into a horse farm as we...

I just ordered a right fender handle for my L3200. It is funny it comes with the holes predrilled and stickers over the fender. The part is "extra' I ordered the part and it came but the handle...

Look what Marvin brought me today! He had a very long drive which was much appreciated. :cool2: Brady and Steve Barlow were also great to work with, and the tractor, trailer and implements...

Changed my Hydraulic Fluid today, and wanted to know if anyone else out there has changed theirs only to find out that the dealer and manual (at least one part of the owners manual) had...

Getting close to my 50hr service. Wondering how much hydraulic fluid I can expect to lose when changing the two filters. What amount of fluid would be a good idea to have on hand.

I have an L3200 and I have access to a 3-point splitter and a couple of other attachments that require hydraulics to fully enjoy. I do not have rear hydraulics. Would it be better to just go to...

So I am thinking hard about upsizing from my B2920 to either a B3300SU or an L3200. I am leaning towards the B3300 since it offers a lot of capability for the size/weight. However, the L3200 is...

I know I've read many posts about the 50 hour service, but I thought I'd ask for some help anyhow. I just purchased an L3200 with 40 hours. I am going to do the 50 hour service. First of all...

Hello just joined the sight. Have a Kubota L3200 and just starting to learn about it and use it. Hope to do some modifications after the warranty is up

I have found all the filters(wix brand) except the trans. filter and the Hydrostat filter. Does anyone have a non kubota part number such as wix, napa, or purolator for this application. I dont...

Did my 50 hr service on my L3200 yesterday. Actually only have 35 hrs on it, but I wanted to do it before it gets colder. Everything went smooth. I only lost 2.5 qts of hydraulic oil when changing...

This decal was just as shown in the picture when my new tractor was delivered. I'm sure that brush guard can handle my weight. I haven't been able to determine where it really belongs. My WSM...

So, I went to my friendly Kubota dealer and bought a secondary (inner) air filter, since I noticed that mine did not have one and it was time to replace the primary. I installed the inner filter...

Am about to take delivery of new L3800. I know this is a new model and haven't seen many posts about it yet. Any owners out there care to enlighten me about what to expect (good and bad).

Does anyone know what the correct washers are for an L3200HST 4WD oil plug? The part # is 6C090-58960 but I would like to buy them local (my dealer is an hour away). These are the flat copper...

Hi, I'm looking at getting a L3200. Commericial tractor snow blades are $$$ so I was hoping to make one as I did for my BX. A few questions... 1) If I get the QA do I want to keep the curl...

Fuel gauge works, but tach and temp do not. Checked the 10A panel fuse and it looks good. All other electrical on the tractor works fine. I just need to figure out why these two stopped working...

Tractor only has 27.6 hours on it. Have had starter problmes several times in the past 6 weeks. Turn the key, wait, turn to start position and hear a "click". But starter won't engage...

Hey All, I have a 2013 Kubota L3200 Gear Drive and when trying to apply the diff-lock I slip off the throttle while trying to put pressure on the diff lock arm. The throttle is on the same side...

I have a post driver for my L3200 and need to add rear remote valves for flow and return- I understand there was a kit available from Kubota, but don't think it is still available? Any help where...

Doing some field mowing for somebody & shut things down for the night running fine. Come back today & it won't start. Thought I heard a click when I turned the key, so assumed dead battery. Ran...

I would like everyone to give me their thoughts on which one to buy and why. Any opinions would be appreciated. Both would be 4WD, HST and FEL. Should I get the quick attach FEL? Should I look...

Anyone out there know if I bought a seat for a grand L kubota if it would fit my basic L3200? or does anyone know if I could add arm rests?

which would I get the most use out of a bx25d with backhoe or l3200 with fel?

Did anyone that purchased a L2800 or L3200 consider a John Deere 3032E? I'm finding the John Deere to be $1000+ less, which I did not expect. Do you think the 3032E is a comparable model to the...

When adding ballast weight to 3 point do you go by the lower link end max lifting capacity witch my manual states 1985 lbs. I have the LA 524 fel with ssqa bucket and want to add around 800 lbs...

Hey everyone, I am looking for a used backhoe for my L3200 but it seems there are none to be had. Do most people just bite the bullet and get a new backhoe from Kubota? I'm thinking this may be my...

Any thoughts or suggestions? Had this 9200 since 1990 and it's really been a great machine. I think HST will be more user friendly as Arthritis has gotten a hold of hands and wrists. Would...

Has anyone ever moved the loader valve to the fender like in the L grand models? I have an L3200 I have been considering moving. I can get the plastic piece that houses the valve and makes it look...

Hello guys... I've been mostly lurking and doing a lot of reading on all the good info, opinions and experiences you guys have provided... Thanks :thumbsup: I've been thinking about getting a...

It seems to me that the Boomer 30 has some excellent features, but the detail that catches my eye is the easy access on the right side. My L2800 loader control really hampers entry and egress from...

:cool2: I've pulled the trigger on a brand new Kubota L3200 HST with the FEL and a Landpride RFC2060 brush cutter with the flat top and optional chains for guarding against kickouts. I wanted to...

Need some help here. My tractor started acting up when starting. Same symptons as many I've read on here; rapid clicking of starter, sometimes nothing at all. Sometimes it seemed that the...

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement...

Is there a special tool for the adjustable arms on the L3200 Kubota tractor?

Hey Fellas, Been reading for awhile and hoping ya'll can help me out. I live in Vero Beach, FL and just bought 3 acres. Going to be building a house within the next year and i'm looking at...

I currently own a JD 2520. I want/need something larger. While the 2520 has been a great unit, when I cut on my hillsides I feel like the tail's wagging the dog so to speak. My main uses are field...

What would be the maximum weight or a 5' or 6' disc and 5' mower that these tractors would handle. Want to get the most heavy duty ones that I can but don't want to get one to heavy for the tractor.

I am looking to do maybe three acres of winter wheat and clover for the wildlife on our property. My question is, what do I need to start with in breaking up the soil? A bottom plow, and disc...

OK, found a BH77 Backhoe for almost nothing, drove 4 hours to pickup a new BH4988 SubFrame from Messick's. Started install yesterday and found out subframe has no directions. Good news is that I...

Anyone have trouble with their fuel cap leaking on the L3200? If so what did you do to fix it? Looks like there is a small nick on the sealing surface. It appears that a small amount of fuel...

I now have an L3200. It would be sweet if I could carry my chainsaw, tools, loppers, pick ax, etc. etc. in the back. I see a variety of "carryalls" including one from the local TractorSupply for...

I'm new to all this, buying my first tractor and am trying to decide on which of these three machines to purchase for a 40 acre mini-farm. Brush-hogging / mowing / bucket use, etc. I think I...

Thanks to months of research and of course the good advice from TBN, I'm getting a new L3200 HST with the same bucket (L2239) that "herefromthere" got with his tractor. I got a good price from the...

Hey TractorbyNet Gang, Glad to be sponsors here. We have launched our new Kubota-specific chain box to make storing the chains a lot easier as you are doing the work. These have been very...

Hey, I finally used my L3200 for real work. For the past few days, I have just been fiddling around with it (first tractor ever) to get familiar with how the thing operates and feels. Right...

Hi All Need help with 2014 Kubota l3200 HST not starting. Sometimes when I go out to start tractor I'll turn key back to light glow plugs turn key to start and I get just one click sound, then...

I'm coming up on my 50 hour filter service. I was going to use the shop vac trick to keep it from leaking too much. But now I'm about to add in another set of valves for TnT & what not I'm...

Hello all, :us-virginia: I have a hydrostatic L3200. It has had trouble starting at times. I thought jiggling wires at the back of ignition switch fixed it; I discovered today that it is...

I was wondering if anybody in the Ne has purchased an L3200 with loader. My local dealer does not have one and getting a price from them is difficult. Has anyone had dealings with Ahearn in MA...

if there are any crush washers I need for the engine oil, Hydraulic fluid or Front Axle Oil. If so, what type (copper?) and size would I need. It doesn't say anything in the owner's manual...

Hello. I知 looking to add a 3rd function valve to my L3200 to control a grapple and plow. I have a slew of questions that I know can be answered by you fine folks. Most people say the...

Anyone here know how to adjust these?..2013 L3200DT 4X4...Hi do to Lo is smooth..but going into HI is a chore..the 2 tabs seem out of alignment.

I was going to change mine out and put in a 50-50 mix of Prestone Extended Life coolant. I know my Powerstroke takes a special coolant. Thought I'd better check on my L3200 before I did it.

Anyone have one for sale or have any options? Tired of getting wet and burnt up in the sun.

Hey Kubota gang, We continue to introduce our new products for the Kubota tractor world as we build on our large powersports' footprint. Fun world to begin to better understand. PRODUCTS We have...

I have a L3200 & picked up a $150 truck plow today. Its manual angle for now & I don't have diverters or a 3rd function up front. Does anybody know if the default spool for the dump valve is 3 or...

My spouse is fond of saying that when we met, I was young, fit and trim. After 20 years of being together "I've been done wrong" because, well ... I'm older, not so thin and not so fit...

I'm shopping for a compact in the 30HP range. I was given a quote by a local dealer for $17,400 for the L3200 HST 4WD with FEL and a SSQA front. Does that sound like a competitive price? It's...

I purchased a used 2013 Kubota L3200DT without a loader (I know) and am now considering adding one from the aftermarket. I have a 1995 Kubota L2650 with an aftermarket Woods 1009 loader. Can I...

My L3200 died this-morning while my father-in-law was using it. I went out to look before running off to work & my FIL pulled the fuel bowl thinking it was a plugged filter. No luck & I had to run...

I don't have the service manual yet to see what runs where, but I would like to mount a 12V plug somewhere on or near the dash of my L3200. Presumably I can tap something in the fuse box rather...

After quite a bit of lurking and soaking up information here, posing the occasional question, talking to dealers, scouring Craigslist, and general pondering :confused2:, I've ended up leaning...

Is there anyway to verify rims will bolt on from new to old? I'm selling L3200 turfs and a gentleman wishes to use them on a L2550. I would appreciate any help! R3

Question #1: I have a 2011 Kubota L3200 with BH 77 backhoe. My front tires (Goodyear 7.2-16) R1's need replacing, but I'm trying to get the best deal I can. The dealer wants $239.00 a piece for...

So occasionally my L3200 would lose power. I had posted on this issue a while ago and have taken all the advice I've gotten from here and put it to good use. By that I mean, I've: Changed out the...

I've decided to purchase the used L3200 with 242 hours, quick disconnect loader and bucket, loaded R1 tires. Get a few extras but I was wondering, since it's used and the original owner financed...

I need some help to figure out what the 31.6x16 means on my turfs on the L3200. The reason I ask is that I am tryingto get some chains that fit. Is this an 'inches or metric" number. Has...

Has anybody done an oil change in an L3200? Are there any tricks? Just getting to 50 hours the manual has some weak graphics but seems pretty normal . Thanks ! Roaf3X

I've been looking at tractors for years, but didn't have enough property to justify one until last week. I've settled on the L3200 and would appreciate feedback on pricing. The configured...

I recently became an owner of a new Kubota 3200. I now have 19 hours on it and I am having a few problems. The other day, I drove it about 50 feet and drove it onto my trailer. I noticed an oil...

Does anybody have a Woods BH80 backhoe on a L3200 (L3400, L3901, etc. they all have the same frame)? How do you like it & would you recomend it? How does the subframe fit? How easy is it to...

Does anyone know the part number for the Kubota kit to add a remote valve to the L3200? I have searched and not been able to find it, my dealer was not very forthcoming as to what is included in...

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement...

Greetings All, I need to ask other L3200 L38oo owners is they feel their tractor lugs at low RPM. I sold my 7510 and bought a new L3200. The 3200 seems to lug down at 1500-1900 RPM at full...

Hello all, After changing the oil in my L3200 I was left with some questions for other operators. 1. The manual calls for 6 US qts. I dumped the oil and put a new filter on. When I checked...

So.....I decided to make a hood guard for my L3200 since, on several occasions, I've had a few loads roll back and rocks hit and dented my hood. I got a little carried away and made this custom...

I have my L3200 in the barn. But with hay/dust from the hayloft under which it's parked, it gets very dusty. I only get it out ever 6 weeks or so, and by the time I do it's filthy - dirty seat...

The FEL will easily lift the rear end of this tractor off the ground, even with laoded rear tires. I have made a 3PH ballast barrel that weights approximately 1000#. I have tried to lift several...

I have a L3200 HST with agri tires and want to go to R4 industrial. Do I have to get new rims for the industrial or will they fit my existing rims.

I've got my eye on a 6' Gannon rollover box scraper, and I'm wondering if it might be too much for my Kubota L3200 HST with R4 tires. Also, if I get the Gannon, I would imagine it would be wise...

I have a Kubota L3200 and looking into getting a rotary cutter. I live in central Texas and this will not be used on a rock free field of grass, rather mowing down overgrown weeds. I have never...

I sat on an L3200 today and while there is a slot for the cruise conrol lever, there is no lever. Did the dealer not install it or is it an option now?

Looking to trade or sell my L3200. It's in good condition with some minor dents, dings and scrapes. What do you all think it should be worth on a dealer trade or private party sale?

ive had an L3200 for a about 3or4 months now and love it only thing i can see it needs is some rear weight ballast any recommendations on this and are there any issues with it that i might need to...

I made the decision and bought the used L3200 last Wednesday, since having to pass by the dealer who sold the tractor to the original owner. Decided to drop it off and have it serviced and...

I recently purchased a L3200 HST (Oct 2011) 4WD with FEL. It was sorta of used only 1 hour on the clock. I don't know what the owner did for that 1 hour but there were no scratches on anything...

Unable to post to Kubota forums for some reason. Went out to plow tonight and noticed my headlights were not working. So started messing with switch and if I jiggled the switch, push in and...

I pulled off my Kubota issued wheel spacers 1.5" I would like to sell the spacers and stud set. They are in great shape . Pm if interested. Thanks R3

Decisions Decisions...Ive narrowed my choices down to either Kubota L3200 or the L3800 AND the JD3038E..... here is my current debate....Is the L3200 a better choice than the JD3038E....both are...

I understand this wasn't a factory install when new, but a dealer add option. Is there much to adding it if you get the part/kit?

Hi, I'm looking for a replacement hood for my Kubota L3200. I have checked eBay, but haven't had any luck. Does anyone know where I could purchase a new hood? Thank you,

I am about to begin building a cab for my L3200 and just ordered the steel tubing for the frame. After searching for the best way to go about heating and defrosting I found a number of heaters...

I recently traded my B2920 in on an L3200, and moved my LED work lights over from the old tractor to the new one. Here's my original thread on the B2920 light mounting...

I had to replace the transmission sight glass (plastic) on my L2800 so I went by the dealer. They had a tractor they were running a special on. It was an L3200. It's a new model replacing the...

Are the B3200 and L3200 buckets interchangeable?

So I hit a snag with my transmission filter (under the floorboard). It broke off so I had to replace the mounting block. Now I can't get the lines to the block to seal. Based on disassembly, it...

Hi Kubota Owners, We are liquidating our inventory of turn signal protectors that were originally made for OEM purposes for Kubota. We stopped working with a distribution company and have this...

Can somebody help me identify the fitting type on the hydraulic block for the loader & 3pt? That orange hose is just air hose I'm doing some measuring with. Is everything 3/8"? I see teflon...

So I installed the Kubota rear remote valve kit on my L3200 today. The install was long, but fairly easy. One of the last steps is to connect a hydraulic line from the power beyond port on the...

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement...

Hey Yall, Just got back into Louisiana for the Holidays. While looking around for a B2920 TLB package, I notice, that there are a lot of the New L3200/L3800's at the dealers, but it looks like...

New member from Maine to this site. I've been on before as a guest, so I thought I'd become a member! I always have questions and sometimes answers.These forums are great. Thanks

Would like to order a couple of replacement parts, but can't find a parts diagram for a 2010 L3200. All I'm looking for is the handle on the 4 wheel drive pull lever and a hand grip for the right...

I'm about due for the 50 hour service...according to my book, I need to change the hydo filter, but it doesn't say the fluid. On the HST trans all the fluid is required to be changed.....if I just...

Can anyone i.d. the month and year for the manufacturing for this tractor, serial number 68175?

Does anyone know where I can buy 2 inch cylinders for my FEL LA524 or the P/N of Kubota 2inch cylinders that will fit?

I am thinking about putting rear wheel spacers on my L3200 HST with R4 tires. I know a local machine shop that can machine them, and I may be able to get them made for less than the cost of...

I'm looking for Christmas gift ideas. I have an L3200 with loader and would like to get some tools to work on it. I have general mechanic tools (wrenches, sockets, etc) but figured I probably need...

Has anbody bought one of these that would be willing to share pricing. I have been looking at the new L3200 or old L2800 with a loader only. Thanks, RD

brochure says 524 lift cap is any where between 855# and 1490# depending on where the load is in relation to the "pivot pin". I take it that the pivot pin is the pin on the loader end of the...

Looking at these two units have yet to see them in person.. Can anybody tell me the main differences between the two? Anybody own any of these? What are your thoughts? Thanks for all the replies

I got the optional internal air filter that goes inside the stock air filter for my L3200. This internal air filter comes standard on the Grand Ls. The answer to this question seems obvious to...

Selling 2011 58 hours turf tires 13000 Pikeville tn 423-605-9228

Anybody come across a hydraulic noise above 1000rpm sounds like fluid being forced through a small hole! All hydraulics seem to work ok. I have changed oil and filter but still same?

Hey TractorbyNet Gang, Glad to be sponsors here. We have launched our new Kubota-specific chain box to make storing the chains a lot easier as you are doing the work. These have been very...

Hey Guys; I have sold my 7510 and am taking delivery of an L3200 this week. I need info on the wheel spacers that are available. I believe they will be exactly the same as the L2800. Does...

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement...

Need advice from you guys. I found a Wallenstein bx 60 in excellent shape for 1800. I was just wondering before I waste 1800 dollars will my l3200 be able to handle this chipper? I am not looking...

We are putting an offer in on a property, and it comes with some machinery including a 2014 Kubota L3200 HST. It has always been stored in a shed, and looked to be in great shape. It has 520 hours...

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement...

Any clearance issues with the outer tie rod?

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement...

Hey Kubota owners, We continue to introduce our new products for the Kubota tractor world as we build on our large powersports' footprint. Fun world to begin to better understand. PRODUCTS We...

I throw this out to the experts here. Why would i have to add a 3rd function valve to run a SSQA plow? On my B there was just separate hoses that hooked into the curl circuit. Is there a...

I think the other day I ran over a big limb that "moved" an L shaped low pressure fluid line underneath the tractor. Appears to be about 3/4" diameter, is L shaped but short on the L and goes...

I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement...