I have a bx2200 with a rck60 deck, no matter where i put the adjuster knob the deck doesn't change height, i know its not a stripped knob because it is gone, i use vise grips. i adjust it with the...
Evening,
Thinking about adding a FEL to my old BX2200D - I don't know the year, but its been around the block a bit. Only really gets used for towing a trailer of logs or cutting grass with a 60"...
First post - So fingers crossed!
I've an old Kubota BX2200 D - Its always been a little temperamental starting. Takes a good few go's before things turn over. I serviced last year cleaned starter...
OK, this issue has been visited close to a million times on this site (that may be a slight exaggeration), but what I'm seeing is not mentioned where I have looked/searched. The problem, not an...
Have a bx2200 that the steering would quit when the tractor got warm. There is a bulletin on this to either rebuild or replace the cylinder. I chose to replace it. After I got it back together...
I think the gear selector (hydro) is out of adjustment (assuming there is a safety interlock there).
I know it needs to be in neutral to start. No crank 2 days ago (no clicking of solenoid by the...
I've searched other BX2200 power loss threads and found none matching my situation. This one has about 900 hrs on it. I've had it for 20 years. Garage kept. Nothing remarkable aside from being...
Update. Tank off showing how to avoid emptying but no idea from where it's leaking and would need to feed fuel somehow to see but stopping for the night. 5 last pictures attached
UPDATE: relating...
My trusty 2001 BX2200 with 1000 hours has got me stumped. It cranks but won't start. I've tried the most obvious fixes including:
- drain tank and refill with fresh fuel
- replaced both fuel...
Just to the right of the "1/10" explanatory printed mark beside the hour meter is a tiny window with a small vertical white mark that seems to alternate from white to black (or gone) when the...
EDIT 3: wrong bolt - needed the shorter one I had originally ordered but did not receive for $5. Luckily I told them to hold onto it for me if / when it came in. This one is too long to fit and...
installing a LA211 on my BX2200D, just installed the Hyd. Block however, Im having a hell of a time trying to figure out how the Hyd. lines are supposed to be routed on the tractor, I know that...
My loader will not go up or down. The bucket will still turn down or up but the loader itself just stopped going up or down while I was using it. The control arm will still flip the bucket up or...
Friends, while mowing today, white smoke wafted out from under the hood. It was about an hour or so into the mow. About 3 minutes after I first fired it up at the beginning of the mow, it just...
Turning key results in provides power to fuel pump and glow plugs but not solenoid.
UPDATE from further testing: did not find a seat switch. Mower is on so the speed control switch can't be...
Hi, New here and i hope im asking the right question but i just got a BX22 series recently and couldn't be happier, although with my lack of knowledge i do not know if this is normal or not...
2nd final update: flushing with water 3 - 4 times and finally some kind of blockage came out eventually clear water. Closed it up, added 50:50 coolant and it ran at normal operating temperature...
I recently purchased a 2003 bx2200d. After repairing a mid-pto shift problem and during reassembly, I made a bonehead move and broke the front case of the HST assembly. I am having difficulty...
I have one RCK60B-22BX deck on my own BX2200 and another on my daughter's machine. The daughter's machine was treated rough by a previous owner but in good operating condition since I acquired it...
Helping my grandfather with his early 2000's Kubota BX2200 ready for cutting grass. The tractor will crank and run will holding the key in the start position, as soon as you release the key it...
I sheared the front axle pin but can't drive the remainder out of the shaft. My question is if the axle is held onto the rear shaft with a quick disconnect collar that will allow me to remove the...
Good day everyone, I am new to the forum and have never owned a tractor so if you can, please be gentle on me. One of my friends bought a home in the country here in Texas, in one of the old barns...
I have a BX2200 and it seems to be having low power. I've only had it a couple months and its been running fine until recently. When going up hill cutting grass the RPMS start getting low and it...
I recently bought a used Kubota BX2200 that is coming up on 800 hours.
I need to change a leaking hydraulic hose and while I'm at it, I'm gonna change the transmission oil and filter.
I'm new...
Well, I'm due for another set of axle seals and bearings... These lasted longer than the originals by 1600 hours (beat by 300 hours).
However, I'm a little upset. Not because I don't want to do...
I spent an hour looking for the FUEL SHUT OFF TIMER RELAY on my BX2200. A Parts Diagram shows it mounted to the firewall up under the dash, next to the Blinker Module. I can plainly see the...
I have a bx2200 and have been looking at rear snowblowers, I have been told 48-52” but found a like new inland 60” is that too big for the bx2200. Also for reference I like on top of a hill in...
I was mowing a low hill at about 40 degrees incline (going up) when my BX2200 gas gauge went to way below empty ... and there it sits.
So far no amount of jiggling or addition of fuel has changed...
I recently purchased an almost new Kubota BX Grass Catcher for my BX2200 w/60" deck (RCK60B-22BX).
The grass catcher was previously on a BX1500 w/48" deck so I have some conversion work to...
This is my daughter's BX2200D with a 60" MMM. I bought it used four or five years ago and it has been a good machine (as is my own BX2200 just like it except for tires.)
The Problem: The deck...
Well, after 18 years, one of the steering hoses finally popped a leak... it's not the ones that go to the steering rack itself, it's the ones that go from the pump to to the hydraulic unit to...
I'm getting no reading from the thermostat of the BX2200. I did just replace the Stop Solenoid. I don't see anything that I missed putting back(everything seems to work fine).
Didn't want to go...
Hello All,
Thank you in advance for reading this.
I have a BX2200 with ~1200 hours on it. Purchased about two years ago and has ran great ever since until now.
The issue I am having is that...
My BX2200 had a puddle of Hydraulic fluid under the rear end. After cleaning and checking everything it appears the oil is running down the sides of the HST and is coming from the top HST vent...
Hey all,
First tractor and still learning what is normal and not. I noticed oil on ground in garage when i moved my tractor out the other day. It seems to be coming from both sides of of the...
Hi Everyone, first time poster here.
So, I just moved from Arizona where there's nothing but dirt, rock, and cactus to Missouri where I now have several acres of green stuff on the ground that...
Hello, friends.
Thankful to be here.
I recently inherited a nice Kubota BX2200 with 600 hrs on it. I love this machine. I have noticed a noise coming from what I think is the HST (in the back...
I notice there is a lot of scuffing, grinding of the rear tires on the pavement on my BX2200 when making sharp turns .... what's the best way to check that the diff lock is not stuck engaged?
Does anyone know what the actual U-Joint part number is for a 2001 BX2200? I'm not looking for the assembly part number I already have that: K2561-16820 and that part is $70-$85 plus shipping. I...
Had my BX2200 in the shop for a hydraulic leak. Technician was having problems with neutral safety switch, so I told him to go ahead and replace it. When I got the tractor back, it would turn...
I have a 2001 BX2200 with less then 700 hrs on it. I've changed the hydro oil and filter several times, with Kubota oil & filters, never finding metal filings in the used oil. The oil is at the...
Looks like I have a hose on the loader that has sprung a leak. Can anyone tell me the fitting size and thread type, I think the hose are 1/4" but I'd like to get some fittings from Surplus Center...
Anyone know the proper current part number for a BX2200 Tie Rod End?
The number I have is: k256116610 but seems to have been superseded half a dozen times.
Also some crazy prices out there...
Today I shattered the front glass on the Curtis Cab on my BX200. Does anyone know an alternative to paying $576 for the new Curtis glass?
Unfortunately it has several mounting holes for hinges...
Tractor has been starting great all winter in sub freezing temps. Pulled it outside to thaw snow from bucket for the day. Started and put tractor to bed. Next day tractor cranks but will not...
Had to rebuild the bucket actuator. After blowing three different hoses on the bucket actuator removing snow, I realized the actuator was binding on a failing seal, and then the actuator seal...
Hi, I have an early 2000's model BX2200 tractor. Trying to get a new LA-211 loader to work. We ran the hydraulic lines per the installation manual and were unable to get the loader to work...
I have seen many threads about BX2200 lighting improvements, but haven't seen a solid answer about auxiliary LED lights. I bought my BX2200 in 2000, so later models probably have different...
I sprung a leak in a FEL hose, and got anew one.
I checked the hydraulic oil and it was low.
I had some Super S 303 on hand, and filled it to the correct spot on the dip stick, I had to add a...
I have a 2001 Kubota BX2200 and the hydraulic lever came mounted on the front end loader. To use the snow blower I have to remove it from the loader and use it free standing in its frame...
anyone have experience changing hydraulic steering lines on bx2200? I am not sure which one of the two that are sleeved together is leaking. they are the two that run from under steering wheel...
fuel pump delivers fuel to injector pump
solenoid functions ...I removed it and see it works
key and starter ok...interlock for pto and fast/slow seen ok since it cranks
disconnected one...
I've repaired and replaced my headlight switch on my BX2200 multiple times in it's lifetime.
I am now trying to find a suitable replacement...
I was reading this thread...
I am looking for some help in replacing the rear main seal on my bx2200. I have had this tractor for a short time and all of a sudden it is leaking oil. Funny part is it doesn't look like the oil...
Does anyone have any pictures of how their steel tubes for loader run underneath their BX2200 for their LA211 loader? Particularly where the lift arm is for the MMM.
If someone could take a...
Similar to many of the old threads, I have had the problem of everything powering up and the starter just clicking, but then starting after multiple turns of the key. Today's problem was similar...
Anyone know how to fix intermittent "limp bucket" on bx2200?
I have been having issues with the bucket on my fel loosing all holding power when back blading. ( I am not digging in at a backwards...
I found a used LA211 Loader with the joystick control mounted to it.
It appears that my tractor is missing lines underneath to connect to the loader. Can I buy these new? Can a hydraulic supply...
Need a new grass collection box for my BX2200 and have the chance of a newer 2014 year one but the mounting seems different. Does anyone know if this style will fit or if it can be easily adapted.
I found a bx2200 with 60" belly mower, la211 loader, 48" box grader blade and 48" rototiller for $6500 private part because the owner is buying a new tractor. Now he says he wants to keep the...
I'm having a hard time finding the part numbers for the pins that are used to attach and adjust the height of the 4 anti-scalp wheels that are on the outside edges of my BX's 60" deck. Anybody...
Has anybody changed the seals on the pivot pin that holds front axle on? It looks pretty straight forward, but like anything when it comes to wrenching on things there can always be surprises and...
I'm looking for a small 4wd machine to keep my driveway clear and mow a couple acres of lawn. I would like to spend $5000, but I can go up to $8k. I had another thread going on here, but I've...
I have been tractor shopping for close to a year and it's getting close to time to pull the trigger. I find myself stuck between buying an older one to save a little money or buying an early new...
Hi everyone.
I have a RCK60BX mower deck on my 03 BX2200.
My question to you folks is the clearance of the deck to the rear tires. After all these years I noticed the gap between the rear...
HI all, I got a lot of great advice & help on this forum back when my BX2200 and I were younger.
I've been seeing a lot of hydraulic problems (I'm typing right now b/c I'm avoiding the greasy...
Hi guys, I just bought a BX2200; it's both the first tractor I've owned and the only tractor I've ever used, so I've got some learning to do.
I'd like to get some basic instrumentation on this...
I need some thoughts and opinions...
I am looking at a Woodmaxx 62" Flail Mower on a BX2200 for mowing my lawn. Some said that I should go with the 54" model, but I want the same cutting width...
After mowing our field, I noticed a rubber boot/shaft seal lying in the grass. I have a BX2200 with a 54" MMM and bagger. I checked the front axles and the axle boots appear to be okay. Does...
After mowing our field, I noticed a rubber boot/shaft seal lying in the grass. I have a BX2200 with a 54" MMM and bagger. I checked the front axles and the axle boots appear to be okay. Does...
I recently ordered 2 new Gladiator 6-ply rear tires for my BX2200. The old tires (Titan 4-ply) were dry rotted...one was fluid filled with a leaky repair plug in it...one was not filled but was...
Been awhile since I posted here, but I still have my BX2200 and still enjoy the heck out of it.
Had an issue arise and I'm not sure where to turn. Last time I used the bota, the motor was...
My BX2200 has a Curtis soft cab on it .... the kind with the steel frame, windshield, wiper etc. with Vinyl stretched over the frame. It's a few years old and I'm getting tired of taping up holes...
I have recently been working on a 2002 (label on engine stated 2002) JD LV 4010 HST diesel with Land Pride FDR1648 finishing mower for a friend.
The tractor had been sitting for quite some time...
Hi All,
I have a Kubota BX2200 that I would like to add an extra valve/function to. I've looked at the threads already posted about doing just this BUT my situation has a little twist.
The tractor...
Bx 2200 with 600 hrs belly mower
recently have had grinding with application of pto to belly mower, possibly less marked at reduced throttle speed.
Quick review of the forum suggests that...
I can remove the loader with no problems..
I put the one male hydraulic into the female.
AND or leave them all disconnected.
Either way me deck mower will not raise or lower with the FEL...
Good morning all. I'm selling my BX2200 and one element of research I'd like to do is to understand the current MSRP (and street price if you know it) for the current comparable model to BX2200...
I changed the infamous 600hr blown steering lines under the floor on my BX2200. What a PITA - running them under the frame with the fuel lines instead of on top of it would've made it a 20 minute...
I have been having a big time. 5 years of great service and this 550 hour tractor dumped on me. After replacing the 2 filters, fuel pump the tractor tries to start. I also drained the tank and...
I was wondering what mower blades you guys were using. A few years ago I switched to the Gator blades, which seemed a little heavier that the OEM blades. I didn't run them last year and just put...
Just bought 2 new axial ball joints for my bx2200. I am having trouble unscrewing them from the hydraulic steering shaft as the shaft is rotating when I try to unscrew them. Is there a trick?
Has anyone else had the left side of the mmm come loose from the spring loaded pin? Mine did 2 times today...simple fix...pull the pin outwards, lift the deck by hand...reinsert pin into deck...
My BX2200 leans a few degrees to the left .... tire pressures all good. Has a cab which makes the lean even more obvious.
When I put a level on the top of the ROPS it shows the tractor is probably...
I know threads have been posted in the past on this issue, but most of them date back to when the BX2200 was still in production. With the BX2200 being out of production (and warranty), what have...
Hello, it's my first time posting, but I'm looking for a manual for my deck and have search far and wide and ended up downloading crap and viruses. I'd appreciate any help in finding this manual.
My hydro pedal is sticky, and the pivot won't take grease. I have to take it apart and clean up the pivot pin so I can get it to take grease again, but I can't figure out how to get to the pivot...
Just wondering if anybody is close to the Houston area that would be interested in trading/selling. My BX2200 has turf tires and in good shape but I want Ag tires. If I'm understanding it, I cant...
first time to remove belly mower.....easy until I try to uncouple the pto.
Instructions mention retracting cover and rotating.....
The cap/cover can be wiggled some, but I cannot retract it or...
I know that backhoes on BX2200 has been the subject of topic many times on here, and believe me, I have probably read every one. I'm aware of the pros and cons and without belaboring any points I...
I am looking for a thatcher with tines to use on my BX 2200. I know they exist, but when you go to the dealer it would be easier asking for a unicorn. I saw a picture the other day of just such...
I remember reading about several BX2200s having some kind of problem that results in the keyswitch doing nothing when you hit start - just click, click, click. Then it starts. Mine is doing that...
Anyone replace the seat on a BX2200? Mines a 2003 and the seat is all cracked and pealing. Time to find a replacement and thought I'd see what others have used. I haven't checked the hole...
What a day!
I had a day off from work yesterday, so I decided to get my bx2200 ready for the summer. I changed the oil/filter, coolant, air filter, and fuel filters. It took a little over an hour...
Because of difficulty starting BX2200, I am now tracing wires...eventually to starter /safety switches and the like. Access to safety switches by removing wheels is ok...and I know how to get the...
When I start the Kubota, the engine stops when I release the key to on. And when I turn the key all the way to start the engine it blows a fuse. I think this is why the engine stops when I release...
Hi everyone. I recently bought a property and acquired a Kubota BX2200 as part of the deal. It has about 400 hours on it. So far it has run well for the few hours I have used it, only needing...
I recently purchased a Kubota BX2200 with LA112 Front Loader and 60" MMM for $7500. The tractor has slightly over 400 hours and I just changed the air filter, front axle fluid and hydrostatic...
Hi everyone! I thought I'd pop back in to see if someone can give me a sense of direction on how to asses a value for my BX2200. I bought it the summer of 2001. It has 425 hours on it. I've...
Hello all,
This is my first time on this or any forum, please bear with me. I'm actually trying to help my father in law. He has a kubota bx2200 that stalled on him. We pulled the fuel line at...
Hello all having an issue with the steering on my bx2200 I noticed while mowing at different times the steering wheel can be turned maybe half a turn and the front tires never move? Like there was...
Hello I'm new here but had a question for the forum, was wondering which model backhoe will fit on a bx2200 and how good they work on this size tractor. Thanks in advance!
I have a Kubota BX2200 that no longer raises the mowing deck on the left side. My father-in-law used to use the mowing deck to step on to get onto & off of the tractor but only recently has the...
Hi all,
My BX2200 recently developed a low pressure fuel leak between the second and third high pressure outlets on the injection pump. I pulled it apart and replaced the o rings which solved the...
After mowing for a while (1-2 hrs.) I find an oil film on the battery compartment cover and on the bottom of the dash. With the covers off and the engine running I cannot find the leak. I believe...
My starter just clicked when I turned the key, if you did it enough it would finally start. I got a new starter and it worked great for about a month now it is doing the same thing. Anyone else...
Hi,
I have a 2001 BX2200. I've had it for 5 or so years and I have been putting 100+ hours a year on it. Lately, it seems to be "weak" while bushhoging and turning uphill. When I press the gas it...
All but one of my 60" mowing deck wheel posts are frozen and I can not free them up. I have tried multiple coats of penetrating oil to no avail. I have hit them with a hammer while supporting...
My BX2200 has the classic full-tank leak issue - defective sending unit seal or something like that. I try to fill it to <3/4 tank, but often overshoot and end up with a little puddle dribbling...
My BX2200 has a 60" MMM deck - is was quite out of level side-to-side (~3/4") when I got it. The manual has no description of how to level the deck side-to-side, only front to back, which I don't...
This is the 3rd season and i've tried at least 20 times to adjust the deck with no luck. The deck is perfectly level with the gauge wheels about 1/2" from the ground. I'm wondering if there is...
Backed the Ole Kubota BX2200 into my detached tiller and BAM there goes the left rear tail light lens AND the fuel tank fuel line attachment point (tit?) which is right behind the wheel...
Great site, been wanting a BX for a while and now that I have one and used it for some time, I have an issue I'm trying to address...
While mowing the HST get really hot as to were I can smell...
I bought my BX2200 new in 2002 (loaded ag tires,front and back with washer fluid). I am thinking about upgrading to A BX25D1 with 60 mmm and maybe A thumb, or make one later . I love my 2200, but...
Has about 800 hrs on it. Bought used from dealer who said it had a lot of water in the fuel system. They replaced all the filters, drained the fuel, cleaned it out and seemed to run fine when...
Hi, Just brought home my first BX, a BX2200 with 54" deck and FEL.
My Deck seems to lower once I have lifted it on the left side that the right, is there an adjustment for that?
Thanks
Ashley.
My 2002 BX2200 developed a power steering hose leak...either the supply to the steering unit or the return to the hydraulic unit. The two hoses run together through a soft sleeve under the floor...
Hi I need advice help please. I have a 2005 bx2200 with a d905 diesel three cylinder 1876 hours and the front piston cracked in half top half scratched the head bottom half scored the cylinder...
The battery on my BX2200 is not charging and the "Charge System" lamp is always on. I checked the workshop manual and there are a couple of issues possible. One of them is a loose connection. When...
I am looking for a used loader for a BX2200. I know the LA211 is the correct Kubota model. I'm wondering what other aftermarket options are or were available and looking for insights from anyone...
I have had my BX for three years now and just started mowing my one acre with the MMM. I notice when doing FEL work or roto-tilling the yard the temp only moves up about a quarter of the temp...
I found a local guy who has a Kubota BX2200 4WD for sale with a 60" belly mower and a loader. He says that the front light cover and the back lights are broken, but other than that it's in good...
I Just purchased a used quick hitch for the front of my BX2200. Everything seemed to fit well, but the mid PTO dive shaft that drives the blower seems to be about 3'' too long. Can this be cut...
My BX2200 has nearly 800 hrs. on it. Maintenance requirement is for a valve clearance check and I wonder if it is worth doing. Has anyone done it? What did you find? I use my tractor for mowing...
I am looking for a starter motor cross reference. I thought I remembered seeing someone on here many years ago posting something about a Toyota starter motor cross reference but for the life of...
Friends, I am in the market for a rear-mounted snow blower for my Kubota BX2200. I decided to get the rear-mounted so that I can keep the bucket mounted. It also seems to be a much simpler rig...
Went to Fire up The 'Bota for our big PA snowfall.. No Fire and no Up LOL.....
Plugged it into the charger and showed the battery not taking a charge. jump started it for the day and then headed...
Hi All,
Is it normal for UDT to darken within 100hrs I changed the fluid approximately 100hrs ago and I have notice it is getting darker. Not a lot but noticeable.
Anyone know if this is normal?
The bucket curl cylinder on my 2003 BX2200 is leaking pretty bad at the shaft seal. Has anyone repaired one of these themselves or should I just take it to a hydraulics shop?
Hey Everyone, I found a good deal on a Kubota BX2200. The tractor comes with turf tires on it. I posted earlier about wanting to know how narrow your BX tractor is. I am using this tractor to run...
My BX2200 loader recently stopped moving up smoothly. I was pushing fallen branches out of a seasonal pond on my property and the loader suddenly did not want to go up unless I repeatedly pushed...
Leaking diesel fuel from under injection line... before I figure out how to remove the pump and bring it to a specialist, should I go buy a special bit & pull off the flange to see if I can...
I知 Long time viewer first time poster looking for some valuable help. I just purchased a 2003 BX2200. Not my first Kubota. Had a b8200 once, wish I kept it. Anyway, following day I did a thorough...
Hi, my kubota D905 engine fitted to my BX2200 (smiley) is in need of a rebuild. In order to get "smiley" running again in quick time, I am considering fitting a used D1005 or D1105 engine both of...
I just recently purchased a bx2200. The lady didn't know the year (how do I find it?) but it had 300 hours on. I bought it with a soft side Curtis cab, 50" snow blower, LA211 FEL and a rear drag...
I just recently purchased a bx2200. The lady didn't know the year (how do I find it?) but it had 300 hours on. I bought it with a soft side Curtis cab, 50" snow blower, LA211 FEL and a rear drag...
I have a Kubota BX2200 with a FEL (LA211). The male quick connect has two o-rings in it (see picture attached). Does anyone know what the part numbers for these rings are as well as where to buy...
Hi Everyone,
I just purchased a used (1400 hours) Kubota BX2200 with a belly mower from the local dealer today. They said it was a one owner machine bought from them new and serviced there...
Hi all - my newish BX2200 had a glow plug failure this weekend. I also learned that a BX2200 is virtually un-startable when it's 40 degrees... which tells me there's no chance of using my...
Hi everyone, hoping for a little help on a price check for a used Kubota BX2200. Just when I was resigned to looking into an older tractor in the $4-$5k range (after my many attempts at convincing...
Left Tractor out in rain the other day. Started and ran briefly but then sputtered and died out. White smoke from the exhaust. Water in tank I presume. I changed out one fuel filter (the easy...
Hello all, I was going through the threads and couldn't find an answer to my question, so I figured I'd ask around...
Looking into purchasing a used (but clean) grass catcher for my BX2200. It...
Have a bx2200 tractor will only run if I hold the key in the start position. When I let go of key it just turns off. I have replaced the ignition switch and the stop solenoid. When I turn the key...
1) When I turn on the key, but don't start the engine (glow-plug position, I think), there is a rapid clicking sound, like an electric fuel pump running. I had a motorcycle that did that once...
Oh geeze. My deck is full of hydro fluid. Splashed up all over the place. Stripes on the lawn. Yuk. Still, 13 years old... I guess I can't complain too much.
I tracked it down to...
Started off I had a noisy bearing on the left side of the deck. Took it apart and found the blade shaft was worn too so replaced both bearings and shaft on the left side and everything was great...
I got a 600-hour BX2200 this weekend and used it today for the first time. It is very cute - everything is just sooooo teeny - and how I lived this long without a 60" mowing deck is beyond me -...
First off, I like to say thank you again for the excellent help I got regarding the hydrostatic transmission. I posted somewhere on tractorbynet. Not Kubota forum, I did not see that. It turned...
Quite some time ago I indicated that I'd post my homemade BX2200 fan protector at the next hydraulic change. Instead of searching for the very old thread, here is a new one. In fact, I'm not sure...
I bought my first Kubota today. It was advertised as a BX2200, but I noticed the tag says BX2200D. Just wondering what's the differences? Couldn't find anything about it. Thanks
The glow plug is doing the audible countdown OK, engine starts OK, turns off upon release of the key. Also turns off when holding the key and shifting to hydrostatic transmission lever to go. Any...
Its time to change the oil and filter in my BX2200 and I would like to use filters other than what the dealer sells. Has someone crossed the filter over?
I just did my oil in the spring, so I'm good to go for a while, but having recently sold a car, I now realize I have a little stash of premium German synthetic oil (Liqui-Moly) that no longer has...
Ahhhhhhhh!!!!! This is my third season mowing with my BX2200 with 60" mmm, but my first without attaching my PTO bagger. For some REALLY annoying reason, my turf tires are tearing up the lawn on...
After mowing for an hour, when driving straight and try to make a turn in either direction, the steering does not respond after turning the wheel a couple of turns. Hydraulic fluid is full. Thanks.
I bought my BX2200 in August of 2001. For me it has been the best mower ever. One thing I hopefully fixed is a persistent clicking noise in the left spindle hub of the MMM. It's been making...
I'm stumped. My BX2200 with 1600 hours has started acting up. When at full power and under load babe engine loses RPMs and starts blowing dark smoke. If I back off on the hydro I can keep it...
Hello,
I am a new member with a problem. Heard that before?
I have a Kubota BX2200 1000 hrs purchased used 5 years ago, with mid-mower and loader. Soon after I got home I notice the high range...
I seem to recall there were some die hard Redline oil guys, and some who preferred the OEM stuff. I need to get the job done this weekend and I'd like to just pick up some oil at autozone down...
Last fall, my parents downsized and I ended up with their BX2200. I snowblowed with it this winter with no problems.
Today it was time to service it. I warmed it up for a few minutes and then...
Where is the best place to purchase a service manual for a BX2200D? Bought new in 2001, and only has 550 hours. I really just need an electrical schematic diagram. Am having some issues and...
has anyone had the steering cylinder leak on a bx2200 , its only one drip but can i replace just the end seal or o rings easily or is it a big job .many thanks.:mad::laughing:
The power steering hoses on my BX2200 started leaking recently. After doing research on the forums, I bought replacement hoses and started the job of installing the four new hoses.
The tractor is...
Has anyone had issues with Hydraulic filter like getting sapped off at the housing ,is there any way to take just the housing off are is it all one piece ,been trying to find a web site that...
Hi and good to be here.
I am about to close on my new house in two weeks and have been researching heavily for about a month. The property is 4 acres with about 1.5-2 of grass. I also want to...
I have a BX2200 that has a bucket loader for the summer and a snow blower for the winter.
Everything on the tractor is made by Kobota.
Today, I installed the snow blower, but cannot get the...
I have a Kubota BX2200 that I recently purchased, it has 800 hours. I bought it as a bare tractor as I had a bx2750 front mount blower to install on it. I hooked everything up yesterday and to my...
I was trying to re-attach my LA211 loader and the ground was very soft. I could not get the loader lined up right and I ended up digging the loader into the soft ground and the loader arms are...
When i loaded my tractor up yesterday i noticed it was leaking fluid from the seal around where the front drive shaft enters the differental. I was wondering if this is a hard problem to fix. The...
While I was mowing this weekend, my BX2200 suddenly took off downhill. Thankfully, the tractor was pointed down the hill at the time and I was able to stop it before it went in the pond. When I...
working on pto for belly mower. tangled in fence line, snap and stop working.
thinking one of those gears lost a or some teeth. any way of telling without
pulling it out?
thanks for any Advice
5385
I want to change the oil in my recent acquired BX2200. I see in the owners manual that there is 3 different oil weights that can be used. I was wondering what others are using? I bought pennzoil...
I mowed all day and after I cleaned it up the HST dash light came on. What does this mean? I haven't had the BX2200 very long. I will be ordering manuals next week. I checked the fluid level and...
I am thinking about ditching my MMM in favor of a FM. I have many hills and inclines that would be much easier to back up to with the FM than to get with the MMM. I do have some turns to make, but...
My Kubota BX2200 suddenly started acting up. When I turn the key, I hear the usual clicking. I turn the key to the start position, the engine rolls over and fires. But, when I release the key...
2 questions/concerns. BX2200, 445 hours, 60"MMM, no loader. Recently acquired this machine two weeks ago. Change air filter and engine oil filter prior to use. So far I have only about two hours...
Hi All,
Rear hydraulics on a Kubota BX2200
Having read threads until I am red eyed could anyone pass judgement/comment on what I have managed to come up with for adding rear hydraulics for the...
I'm really frustrated by the ROPS getting n the way when I mow near smal trees etc. I've been debating just removing it. I had not in the past because I had a FEL, but the FEL goes to a new...
Note I am not griping, I expected some problems with the tractor when I purchased it.
I have been dreading removing the 60 inch deck on the somewhat abused new to me BX2200 I purchased last fall...
Any thoughts or advice greatly appreciated. A few immediate thoughts come to mond.
1. Will I need to drain all of the UDT fluid?
2. Do I need to purchase plugs for where the hydro lines leave...
Hello all. I'm searching for the right tool to maintain my 800 foot long steep driveway that gets washed out when it rains. I've asked numerous local tractor users what to buy for my Kubota and...
I posted the other day of a potential move to a neighborhood where all I'd ever need to do is mow. Snowblowing is done by a dedicated walk behind that I have.
I was considering getting a zero...
Hi all,
I may be getting a smaller place in a nice little neighborhood and I am considering selling my BX2200 and getting a smaller grass-mower-only kind of machine. A few questions come to...
Noticed today while mowing yard tractor acted like it was loosing power while going forward and mowing. If I stopped forward movement and disengaged mower pto motor sounded fine did not notice...
I heard an unpleasant snapping noise while moving my loader valve recently. Now it will stick a bit while being pulled down. Has anyone had experience rebuilding these valves? Is there a kit...
My BX2200 has started leaking at the shaft seal under the steering wheel. I priced up a new valve and the dealer wants over $700 for a new one. They offer no rebuild kits.
Has anyone had any...
Hey all,
Subject line is wrong... Left blade spins freely and does not cut.
I think I got into too deep of grass and messed up my left cutting blade... While I was cutting, I started having a...
I took the loader off my 'new to me" 900hr BX2200 for the first time today. Mine is the old type where the loader valve body stays with the loader.
As soon as I restarted the tractor I noticed...
Hi again from upstate NY, tried a search and found great threads on leveling the deck, however I need help on the height knob. Have a new to me BX2200 with 60" deck.
I am having trouble...
I have been debating pallet forks and have been suffering from sticker shock on the combined price of forks + a quick attach system. Knowing that I was not going to figure out what I wanted soon...
Found one of these with 1500 hours, 54" belly mower, and an FEL for about 7900. The dealer has not set the actual price yet because it just came in but the sales guy said he expected it to be...
After reading a few posts about changing this thing out, I was a bit leery of getting into this. I already had the floorboard off in conjunction with a hydraulic hose change. I figured while I've...
I have a BX2200 that was having issues turning over and starting. I replaced the battery and still have same issue. Can hear the fuel pump going and the starter tryes to turn the engine over but...
New to tractors, have blackland prairie gumbo soil. Have a used Kubota BX3300 with 450 hours on it, a large garden, lots of hope and lots of frustration all at the same time. Have a lot to learn...
well the grass is starting to grow and you know that means time to get the mowers in shape/well the gutter arount the deck of the old bx2200 was a lot of rust so I tok the deck off to wire brush...
I am replacing the front tires on my BX. They had a lot of brown goop maybe fix-a-flat in them which has messed up the bead seat area. I used a wire brush, 100 grit sand paper, and brake clean...
Worked fine and plowed the blizzard of 2013 fine. Went out to do clean up and it won't turn over. Noticed fluid underneath and found the hyd fluid is very low and leaks underneath. Just paid $357...
I looked at a BX2200 with 330hrs, loader, Curtis soft cab with heater and BX2750 snow blower with electric chute for $7,100 today. It has never had a mower deck on it, just used to move snow. The...
I need to replace my fix-a-flat'ed front tires. Plan to repaint to get a good clean seal for the bead.
But which color, and is it the one that is the same as chevy engine orange.
Also would it...
Hi
I am the proud owner of a new to me BX2200 with 940 hours on it. It came with a FEL, 60 inch belly mower and a box blade. The tractor is my personal toy. I want to build a few water garden...
Hello,
I'm a new Kubota BX2200 tractor owner and I have very little knowledge of hydralics. Mt BX2200 has a 4-way valve joystick-type hydralic countroller mounted on the driver's right side. I...
Hello,
I'm a relatively new Kubota BX2200 owner. The one I bought was lightly used and came with the belly mower deck already attached and the BX2763 snow blade and BX2711 front hitch. As I...
I just purchased a bx2200 with the front end quick hitch. The snowblower attachment (2750) is on it. I would like to attach the rotary broom. What is the procedure to disconnect/reconnect. Need to...
Gents might I get some opinions on the value one would
say is a fair price for a 2002 KUBOTA BX2200 ?
It has been carport stored, has 100.6 hours on it, it has a
Kubota FEL #211.
It is in...
Hi Guys
I have been on TBN for a long time but have been not too involved; it seems there is more to do than the amount of hours in a day allows. Anyways I was in a hurry to get the grass mowed...
Greetings, long time forum reader/lurker, just purchased a 600 hour Kubota BX2200 with the 60" deck and front snowblower for my 2 acre lawn and 135 foot driveway. Looking forward to using it soon...
Background:
I am trying to help my Dad out with his BX2200 to make it easier to swap out the FEL and front mounted snow blower. He originally purchased the BX2200 used with a mid-mounted mower...
Hi. I just bought a house on 5 acres and as part of the sale, I became the proud owner of a Kubota BX2200. I want to buy a PHD to help me put up a large fence and I've heard that they don't have...
Last fall My husband was using the tractor cutting high brush, the fan blades under the tractor we gone due to the high brush.
and the tractor got hot. He stopped mowing and got it back home...
Soon after I bought a BX2200 in 2001 I decided it needed a cab. My friend John Livingston and I got to work. The frame is 1" square thick wall tubing. The sheet metal is 16 ga. Side and rear...
It is nearly certain that I'll be moving and I'll only be able to use a very small mower at the new place. I have a 330 hour, meticulously maintained (and documented maintenance) BX2200 with the...
i have a bx 2200 that runs smooth when the engine is cool but when it gets warmed up it runs rough. it seems like it is missing on one cylinder. any suggestions!
does anyone have an idea what a curtis soft side cab for bx2200 and others, is worth. It has the mirror kit looks like it was never used. and has a window wiper on it. has some other parts too...
Hi all,
I had an unusual problem with my BX2200 this morning.
Here's what happened:
Go for start, ignition turns on (light ok), preheat a few seconds ok, go for starter, engine starts...
my used bx2200 has two sets of rear lights for turning signal and flasher. I purchased new lights and my question is, do you have to remove the decking the rops mounts to, to get to the wiring i...
After a number of posts over time on the ability to stop a diesel engine I was curious about my BX2200. I looked at the Parts Manual which shows a stop engine lever and a separate stop solenoid...
As a new owner of a tractor, I find myself on this site all the time. Great info and respectful users. Bought a used BX2200 2002 with FEL 590 hrs, new Ansung 52" tiller, new 48" Taylor Made rotary...
I have a bx2200 that I have just had to replace the HST pump due to low pulling power and issues with moving. The 3ph worked perfectly before I replaced the HST pump. After replacing the pump and...
I want to add a FEL to my BX2200. Since Kubota no longer makes the LA 211
and I can't find a used one what are my best options? Can the LA 243 be
adapted by drilling new holes in the frame and...
Just a note that I have a nice 2004 Kubota BX2200 with 60 inch deck and only has 500 hours on it , turf tires , and all fluids and filters changed . In the Cincinnati Ohio area .Asking 7500.00 or...
I made a set 3 point forks to move fire wood around on pellets.doesnt lift
as much as i thought it would. If i took mower deck off would it help to lift
more weight. thanks for any help
I've been shopping for a mower that will shorten my mowing times. We are now on 4+/- acres, and the JD 42" cut takes way to long. The Grand L with finish mower is hard to maneuver around all the...
I purchased a Kubota BX2200d with 279(if the meter is correct) hours? Machine looked to be in fairly good shape. Except the mower deck was covered with oil and dirt. Owner said the Oil had come...
I really needed to get an oil change done yesterday. I stopped at Advanced Auto and the only oil they had in the diesel section was Rotella (from Shell) in 10W30. They had other brands in other...
I bought a BX23 last weekend and it did not come with the three-point hitch. Based on searching this forum, I know the BX24/BX25 hitch kit will not work on my Kubota. I have located a complete...
After sitting a couple of months I decided to crank my BX2200 yesterday. Turning on the ignition gets the satndard results (gages lighting up, ticking), but the starter does not turn over. When...
Hi, I have just returned home after a couple months on a job. My nephew had helped keep the grass down with my tractor. Now that I have started it it is running very uneven. I bled the injectors...
Can someone tell me what size the large nut is at the flared fitting connection on the hard hydraulic line under the front end.
I have a leak and it seems to be coming from that connection.
Having...
Hello,
I obtained a BX2200 parts manual in .pdf and was wondering if it could be used for the BX1800?
Does the BX2200 just have a bigger engine?
Would there be any differences in the parts...
The time to downsize and move closer to the big city has come for me and my trusty BX2200 (2003-888hrs) and support cast: front loader LA211, backhoe -Woods BH6000 (2005), 54" rotary mower, DR...
I bought a new Ujoint (#K2561-16820 or #160 on diagram) between the forward drive shaft and the front drive shaft after losing one while mowing in the late fall. I assume it fell off and got lost...
Having trouble with motor flooding every time i start it. When its cold out or warm doesnt matter . First couple weeks i had it no problems. tryed half throttle
no throttle. seem not to matter how...
I have a 2003 BX2200 For Sale if anyone is interested they can msg me about it. This is a very nice tractor no issues.
has the loader and mower deck also tractor has right around 300 hours on it...
I have a Kubota BX2200 with approx 260 hours on it. I noticed about 2-3 weeks ago that all the lights would stay on at all times (blinkers/hazard switches would not work--the lights were just...
I have a Kubota BX2200 with approx 260 hours on it. I noticed about 2-3 weeks ago that all the lights would stay on at all times (blinkers/hazard switches would not work--the lights were just...
I have a Kubota BX2200 with approx 260 hours on it. I noticed about 2-3 weeks ago that all the lights would stay on at all times (blinkers/hazard switches would not work--the lights were just...
Newbie question
We will be out of state (Arkansas) all winter and my BX2200 will be idle, sitting in the pole barn.
What procedure do you recommend to winterize it?
Thanks
Got a cab for winter and the electric heater that came with it stinks. I was wondering if anyone has ever rig up a propane convection heater with the little propane 1lb. Tanks.
I know I can make...
Apparently the fuel level sending unit is bad on my BX2200. I took a quick look at how to get to it and HOLY COW... I think half the tractor has to come off to get to it!!! :confused2:
Any tips...
When I raise my bucket I can't pull lever back to stop or nothing happens. I have to ease lever forward and bucket moves slowly with little power. Has anyone had same problem?
I found two kubota tractors im interested in on is a b7200 and the other is a
bx2200. They are similar in price but the 7200 is about 500 cheaper, they are both hydrostatic and both 4x4 in good...
I just aquired a BX2200. It's in great shape but is leaking UDT fluid. I thought it was the filter and replaced it. Still leaking. It appears to be coming from around one of the two bolt heads...
I've been trying to buy a used front mount snow blade for my BX2200 but having no luck. I've found an L2040 blade with an L2180subframe at a good price that fits L Series Kubota. Anyone know if...
Attempting to replace the seals in the steering cylinder, I can't get the shaft to come out of the cylinder. I'm trying to remove the shaft from the end that has the hose fitting at a 15 degree...
My father-in-law just bought a BX2200 with loader but no mower deck, we have located a nice RCK48-15BX deck for a BX1500 for a great price. The question is will it work his tractor and what kind...
Now that fall is almost here and the weather is cooler (MN) I decided to put together my Northern Hydraulic 3PH log splitter. It was on sale, with coupons, $509 (13 Ton version).... how could one...
Recently I noticed a small puddle under my BX2200 and traced it to the mid pto. It appears that it's losing Super UDT2 from that point.
Does anyone know where I can find an online schematic or...
My tractor started fine this morning, and ran great for 30 min until I turned it off and went to restart it 20 min later.
Nothing happens when I turn the key, except the normal panel lights...
I posted a while back about my hydraulic lever not returning back to center when I am using it and lugging the engine untill I return it manually to center.
As this seemed to be an intermintent...
The gearbox on my 60"mmm pretty much exploded last time I mowed...not sure what caused it but i heard all this racket from below and when i shut off the mower and looked most of the gears, races...
Anyone know where to get a replacement hood for my BX2200. Mine has some decent dents on the corners and 2 cracks. I'm wondering if it is possible to find a replacement and if it would be...
Just did the BX2200 steering hoses after one split and puked hydraulic oil. Replaced the two to the rear. After searching TBN there was some help but more information is needed.
>The pair of hoses...
Is it possible to get extenders or replace the BX2200 lift arms with longer ones? I have a rear scoop that I cannot get the stock arms to fit on and my box blade needs to be further back so that...
Hi All,
I tried my new/used BX2200 for the first time with the 4' box blade I have used for a few years on my old 13hp 4x4 Ford 1100 gear drive tractor. The Ford handled the box great and I...
So I bought a 2001 BX2200 with 60"mmm and hydro lift plow. I'm interested in finding out my options for adding an FEL. The FEL I have seen mostly on BX2200s are a one piece unit with the...
Hi,
I bought my BX2200 with the LA211 loader last year. It's an 2001 model. Last weekend I did some intensive work with the loader and now I have a dripping leak on one of the hoses that connect...
Can I fit a B2763 blade onto a BX2200? I came across a good price on a used B2763 but Kubota says I need a BX2760A. Just wondering if I can make it work without a lot of changes? Anyone know...
I spent part of July 4th doing maintenance on my BX. While mowing with it last Friday it started bogging down on hills, and past experience told me it was time for new fuel filters. That was the...
I am getting coolant coming out of a weep hole in the water pump. I am not sure what this indicates? should I replace the entire pump? Or just the seal and/or impeller and shaft?
The hydraulic lever on the BX2200 will not return to center. If I lower the mower deck to the set mowing height the lever will stay down. When rasing it will stay in the up position and you can...
My BX2200 is 10 years old. I bought it new in 2001. Just yesterday I had a power steering line break while mowing the lawn. I had heard that the early model BX2200 had a know heat related...
I've had my BX2200 for a week (600Hrs)and and used it once. Just my luck, a hydro leak. Easy fix, but have to wait for the line to come in. Just thought I'd post a few pics so you know the area I...
What a relief to find this site. I have spent hundreds trying to resolve the steering problem on my tractor. Now, thanks to y'all I know exactly what it is. Does anyone know if a dealer will...
Looking to install an LA 210 loader onto a BX2200 Tractor. The loader came with no mounts and one dealer tells me I can't put a 210 loader on the BX2200. I've done some research and many say the...
Just picked up a used BX2200d w/FEL and 1200 hours on it this winter for $6600 and the only maintenance I didn't do right away was the hydraulic fluid/filter change. Tonight when I dropped the...
Im going to be looking at a used BX2200 as my first sub compact.
Its got a 54" mower, bagger, FEL and around 1400 hours.
What items should i focus on to make sure are in good shape?
Priced at...
What are the pros/cons between these 2 tractors. Both have similar power & hst and 60" mowers. What are the noticeable differences? Tires are bigger on 7510.
While investigating cheap filter housing strap solution (previous post) I noticed that if I left the engine shroud off, the headlights are VERY BRIGHT! After owning this tractor for 11+ years...
Cheap strap that holds air filter housing to vibrating tractor engine broke again. Think it's time to create bracket to hold filter housing to tractor instead of vibrating engine. Will this...
Hi all.
Once again I turn to the brain trust here. I have a new to me 2001 BX2200 with 110 hours on it. It has a small leak at the left rear. The tire is wet on the inside and it looks like...
Been greasing the BX by looking for fittings and greasing them every 10X, but where the heck is it in owners manual. Am I missing a few pages? Concerned I'm missing fittings I'm unaware of. Mower...
WOW!! Three years ago I had the PTO control stick on my tractor. Originally, the dealer said that it would take two weeks to fix. I told them that my steering was intermittantly going out and to...
Anyone have one, or think it's possible? I have to cut about 1 mile of stream bed which also slopes about 4' downward on each side. Covered with tall grass. Can't even get close with MMM. To...
Is there a mini backhoe attachment available for a 2004 Kubota BX2200? My dealer said they configured one for someone once, but it was a bit of work and he felt the tractor was too small for it.
I caught a limb last fall and sheared off the blades on the HST cooling fan on the BX2200 I bought last summer. Planning on changing it myself this spring. Any advise? I think I own the tools...
I have a 2004 BX2200 with a steering cylinder that needs replacing or rebuilding. Apparently there was a recall on the cylinder because it would bypass in the cylinder and not steer (on mine to...
Hi All,
I'm new to this forum and I recently purchased a used Kubota BX2200. However, it didn't come with an owner/operator manual. Anyone know where I can get a copy? Many Thanks.
Patrick
Has anyone located a source other than the dealer for a mower belt for a RCK-60B-22BX deck that goes on a BX 2200? the $123.00 price at the dealer is a little hard to swallow:( I was expecting $50...
I haven't been to the forum in awhile, but it has always helped me in the past.
I have a BX 2200 that is seeping gear oil on the back side of the axle at the pivot point. Has anyone ever replaced...
After clearing the snow today and finding I'm running out of room to put the piles, I'm thinking more about a snowblower. A neighbor's driveway is gravel, drops off fairly steeply from the street...
I have a 2001 BX2200 with loader, Woods ground breaker backhoe, 60" mower and Curtis cab which I bought new. It's served me well with no breakdowns or issues for 300 hours or so. But this winter...
Hello everyone. I'm new to the forum, and new to ownership of a tractor. I recently purchased a used BX2200 with a bucket, MM 54" mower, and real balast box. I'm learning so much from this...
I have a BX2200 and recently their is a light on dash that has come on. The light is HST and my dealer has no clue. Any help on what this light indicates would be appreciated.
Hey guys, I want to hook up my Herd 3 pt spreader and throw some pelletized lime down. The mower deck goes up/down with the 3 point hitch. There's a "top" detent on the deck height adjust knob...
There is a BX2200 nearby that has "HYDROSTATIC TRANSMISSON. Kubota front end loader. Kubota 5ft belly mower. Woods 4ft rototiller (low hours), Leaf vacum system (needs minor repair), 4ft box blade...
I am looking to buy a 2001 Kubota BX2200D with a full Curtis hard cab model 1KBXAS and I want to install a Woods LS72 loader. Does anybody have a similar configuation and know for sure if the...
I am looking to buy a 2001 Kubota BX2200D with a full Curtis hard cab model 1KBXAS and I want to install a Woods LS72 loader. Does anybody have a similar configuation and know for sure if the...
I have a BX2200 with the loader ,60 inch deck and snow blade BX 2763 since new in 2001 with 418 hrs and it has been a wonderful little tractor and never been in the shop for repair.I'am...
When going from reverse to forward direction i have noticed my little Bota seems to "bounce" two or three times before levealing out and roaring off. It only seems to do it if I only PARTIALLY...
So I went through my first tank of fuel last Thurs. I found out it's empty when the gauge still reads 3/4 tank. Friday, I filled the tank to the top with diesel, climbed on and started cutting the...
Hey all, long time lurker, haven't posted since I asked for advice when buying my beloved BX2200.
So after a long weekend of digging out brush & trees, my headlights suddenly stopped working. I...
Just got my used BX2200. So far so good. I have the loader valve & 60" MMM.
First attachment I'd like to look into is a power angling front mount blade-something that can push gravel & light...
I have a 2001 kubota bx2200. The forward/reverse pedal began to get stuck after a couple of hours of operation. The next morning when I started it to use it, hydraulic fluid was pouring out at...
After my exhaustive search for a 60" or 72" MMM tractor, I settled on a nice clean, used BX2200 with 525 hours with 60" MMM from my local dealer.
He is changing all the fluids/filters, cleaned...
Non-mechanic here. My bx2200 died while operating and had smoke coming out the left side. Took the side panels off and there is a part (has VDC on it) that has wires going into it. That is what...
We have a BX2200 with a 48' mowing deck. This summer had to replace head because of constant overheating issues. Since replacing head, sending unit, thermostat, and new temp gauge, still will...
I have a 2000 BX2200 with a 60" MMM and mulching kit installed. I have both the standard and mulching blades. This spring I decided to put the like new standard blades on while I sharpened/touched...
I know I've seen this covered before but I can't seem to find it again.
Does anyone have any recommendation for a cab to put on my BX2200.
I've looked at some on ebay for around $700. Are they...
Due to another thread and watching the video of the QI in operation, I have figured that it will be easy to add that feature to my BX2200. I know it's not as good as Position Control, but it will...
I have a bx2200 that has been running fine. Yesterday I went to start it up and it will start up great, but once I let the key go and it moves back from the start position the engine promptly...
Ive been wanting to buy a sub-compact tractor for years.. I finally saved up the $$$$ and bought a 2005 with a 60"mmm and a 211 loader. It has 213 hrs and the power steering is giving me crap. It...
bout 500 hrs...good cond..small dent in the hood..fel also. mid mt 60'' deck.
throw in a 4 ft bushhog too...maybe another 400 bucks worth
gimme an idea to sell it..
gary
Hi All,
I have a bx2200 4x4 FEL. I use it often. Several times a year I have water in the fuel. I know this from the white smoke in the exhuast as I try to start it. To get going, I pull the...
This is my first post to the list but a long time lurker. I found a BX2200 on
Craigslist for $1,000 and couldn't resist the challenge. No, it wasn't a scam
but it does have some fire damage. It...
Just bought a BX2200 with 2000 hours and the right rear axle seal is leaking and dripping on inside of wheel. BX2200 service manual shows that to replace the right rear axle seal you remove the...
I have a 2002 BX2200. When the key is in the on position, The blinkers are blinking even though the blinker switch and the hazard switch are in the off position. Does anyone have suggestion as to...
BX2200 will run fine for a couple of hours and then will start lossing power and start sputtering and shaking, i will idle it down and let it "catch up" and it will regain all its power and then...
ok i havent been on here in forever i havent had any probems out of my tractors lol anyways i started cutting grass with my bx about 6 weeks ago and the first 4 were ok but i had gotten done...
Hi folks. A buddy of mine has a BX2200. He's looking to install a tachometer on it. Has anyone done this with there BX2200 and if so what type of Tack did you use and where could I get one. Thanks...
The original battery finally died on the little Bota, after 8 years. so i need a new one. but the battery does not have any markings on it for me to tell how many cranking amps etc. anyone know...
Hello to all!
I was working on clearing some brush today and got a fuel leak on my BX2200. This happened once before....something came up and pushed off the fuel line...not so lucky today. it...
Last spring I had to rebuild my diff lock as it was completely destroyed. After I finished I had a drifting in my steering, I have to constantly turn very slightly in order to keep the tractor...
Okay, I have a leak on my lift cylinder connector. There is a plug on the top of the square connector where the hose attaches. I see the O-ring blown out, sticking out from under the plug.
I...
Anyone have a clue as to why the stop solenoid on the injector pump only gets power from the white wire when the starter operates? The red wire seems to be dead. Are there relays in this system...
Have searched as best I can but can't find any conclusive answer so apologies if I am repeating previous posts.
Problem - engine runs when on starter motor but when key released to run position it...
Can anyone give me some insight on how to tell the difference of a 3-way or 4-way loader valve on a BX2200? Last weekend I purchased a 2000 Kubota BX2200 with loader, 60" mmm with mulch kit...
I have a BX2200, MMM, FEL purchased in 2004, 480 hours, very good condition, but kept outside. Bought a new BX2660, but the dealer is not interested in carrying used eqt. anymore, so no trade-in...
Looking at used. I don't see alot of difference other than BX2200 newer model. Equiped with FEL and brush hog or box blade around $10,000--little less. Would kindof like to have mmm but don't seem...
I will be changing the Super UDT for the 300 hr service. Now that I have a FEL installed, I was wondering if I will need to bleed the hydraulic system afterwards. Any pointers would be...
My tractor has suddenly developed a very loud intermittent knock. I mean loud! like somebody hitting the engine with a hammer. Nothing at idle, often but intermittent bangs with load. Engine...
I'm a newbie with 15 acres of trees and prairies to maintain in the Waterloo, Il area... I'm in need of a pto operated brush cutter, and other pto accesories like log spliiters etc but i'm not...
So I recently moved up to the SE region of PA and have a little over 3 acres, probably 2.5 of which is grass. I think I have decided on a BX series but have a couple questions. Mainly, what are...
Yesterday, when I went to crank, I noticed the glow plugs didn't come on. It still cranked though, but I noticed the fuel and temp. gauges weren't working. Today I checked the fuse, which was...
Hi all,
I've received close to 60" of snow thus far and after a couple 20+ storms, I was able to convince the wife that a snowblower for the BX would be a "smart" (read "fun") purchase...
Hello,
I have looked into most of the old threads and decided I would like a curtis hard side cab and today found out no longer available Sims still has the one with a soft door and a curtin but...
Should a bx2200 be able to lift the front end by rolling the bucket? I can get it to lift the front end by rolling the bucket and then putting the arms all the way down, but if the arms are down...
Hello,
I think I have an oil leak on my bx2200. It isn't much, but I just want to know what I am dealing with when it starts leaking more.
Attached is a photo from Messicks web site. It shows...
In the past I posted that I was converting a B2650 snowblower to fit the BX2200. I received several inquires as to my progress and whether it would work. The B2650 was designed to fit the B-series...
Greetings. Looking to buy my first Kubota. Currently looking at a BX2200 with FEL and 60"deck. Tractor has about 1100hrs. This seems like a lot of hours to me so I am looking for some advice...
Im shopping for a blade to plow snow. I've seen blades that clamp onto the front loader bucket that appear very easy to use. My concern is that it might make the tractor a bit front heavy and...
Hi All:
I've been looking for a compact Kubota TLB for a while now that will satisfy needs and budget. I just saw a used BX2200 on Craigslist with a woods backhoe (6000) mounted on it. I plan on...
1st time post. I have a 2002 Kubota BX2200 and was one of those that did not buy the FEL initially. Now I own 5+ acres and find the need growing daily. New cost for a LA211 FEL (original spec)...
Just noticed a leak from within the fabric wrap covering what I'm guessing may be the power steering pressure hoses. The actual leak appears to come from fairy high up. Anyone experienced this...
Hello,
I just bought a 2001 bx2200 (my first machine), and had the thrill of finally getting a tractor to help with my long driveway beat down with a fuel leak. The machine is very...
I have a 2000 BX2200 that is giving me troubles. When I turn the key to the start position the engine turns over and sounds like its running if I keep the key held in the start position. when I...
Thanks to schrand and Volfandt who helped me diagnose why my 3ph wasn't lifting: a coupling on the FEL wasn't completely connected.
Anyway, I had been trying to figure it out prior to their...
The 3ph is not lifting. I had just put on the FEL, and had had some difficulty getting one pin sleeve aligned. There was also some difficulty getting the FEL to respond to the hydro stick. I...
Well, my wife tried out the FEL on the L48 and now wants one for "her" BX2200.
I have searched this forum, Googled, and Binged coming up with the following as possibilities.
Koyker 120
Woods...
Hi Everyone,
I am having a problem with my BX2200 starting. My tractor does start but only when I turn the ignition switch the whole way to the on position. When it is fully turned to on...
BX2200 (D905 engine) won't start, electrically dead. After mowing the lawn last weekend, parked it in the driveway for about an hour. When I went to move it into the garage; turning the...
The support bracket that holds the gear box on the mid mount mower cracked and broke where the bolt holes are, and i need to replace it (left side as your sitting on it) I have two questions...
Hope someone out there can help me with these questions.
I need a new spray system for my vineyard.
I'm currently running a 15 gal tank with a 12 volt electric motor, but the coverage with this...
My MMM seems to be slipping down. The adjustment screws on the rear mower links are in the topmost position and yet I have to mower height knob at the 4 inch position to mow. Any lower and I'm...
Does anyone know the aprox cost of a new floor pan for a BX2200. Our local stealer quoted me a high price and before I buy it I would like to know what they go for. Thanks guys!
BX2200 with 550hrs. Got in a wierd angle while mowing my ditch this week end and needed the rear wheels to lock. pushed the Diff lock peddle (seemed rather soft) but the other wheel did not lock...
I am looking at two used Kubota BX2200 at local dealers who deal in used equipment or trades. They are similiarly priced, but one has 200 hours and the other has 496 hours. Both are for sale used...
A couple of hydraulic lines blew out on my BX2200 last week, so I thought I would just replace them all while I was at. Good plan, until I forgot to take note of how the hoses were positioned and...
Hi, I have problems with the steering. I have replaced the seals in the ram 6wks ago but has gone wrong again. Is there another box under the steering wheel with seals in. It thinks about steering...
I took my starter off to have rebuilt but when I went to put it back on (weeks later) I cant remember where the white wire (the one that comes apart in the middle) connects back to? If I hook it...
I took my starter off to have rebuilt but when I went to put it back on (weeks later) I cant remember where the white wire (the one that comes apart in the middle) connects back to? If I hook it...
Hello,
I recently bought a BX2200 and now I'm looking to purchase a loader. My local Kubota dealer couldn't source a Kubota brand so they suggested a Koyker Model 50. I've done some searching...
I'm noticing that my 2002 model BX2200 (515 hrs) has been losing power recently when mowing up hill. I always mow in low range, and I've never noticed this until recently. It also seems to be...
I posted this yesterday, but I guess in the wrong place.
I have a BX2200 with 400 hours on it.
The bracket that holds the drive shaft for the front axle snapped off at the frame. (Picture...
Anyone ever hear of the bracket that holds the front wheel drive shaft breaking ? I had a catastrophic failure of mine where the bracket broke completely through on one side and left the corner of...
I just bought a 2002 BX2200 with a 60" MMM and 80 hours for $6850.00. It looks brand new. I'll be picking it up on Saturday. The original owner lost the manual and I don't know anything about...
I was recently involved in an accident that will leave me partially disabled, and, as such, I will no longer be able to pull the deck out from underneath the tractor in order to change the blades...
So I just finished mowing and pulled in to re-attach my loader. Shut it down, connected my hyd. hoses and went to start it back up and "NOTHING". So I thought I had it in gear, but nope, it's in...
Posted this in another forum...this one might be better:
We have a Bx2200 from 2001 and we use it with a FEL, 60" mower and rear blower. We have worked this tractor quite hard and it has...
We have a Bx2200 from 2001 and we use it with a FEL, 60" mower and rear blower. We have worked this tractor quite hard and it has developed a few leaks in the front. Thinking of trading it for a...
Hi group,
I have a BX2200 bought new in 2001 and it finally needs a starter. Can I assume that it is a fairly easy replacement? Also, suggestions for best place to order from?
Thanks
I've been noticing for a few years now the left side only begins lifting after the right side is nearly all the way up. I'm guessing the right "driving" lift arm, shaft holes, and/or left lift...
I've seen threads regarding a skid plate for the BX, but haven't seen any threads about guards for the front axle/power steering arms. I used my BX and bush hog to clear old logging trails last...
Sorry long post:
Was doing my spring maintainance of changing the oil and all the filters on the 2200, and started the tractor up to check for leaks. and since I had the engine cover off I notice...
Just joined, this is my first post on your site; what a HUGE resevour of wealth freely shared here.
I am looking at a 22hp BX2200 HST with 600 hours, for mainly mowing former cattle pasture...
I am getting ready to pressure test My BX2200 , for the many times mentioned annoyance of running warmer than it should.
My question is this: How many have actually pressure tested their system...
Have a chance to buy a good used BX2750 front mount snowblower complete with quick hitch that came off a 2003, BX2200. I would like to install it on my BX2350. Are they compatable? It has a crank...
I happened upon this site a while back
BX full layout pictures from hobbies & interests photos on webshots
and I wondered if the owner is a member of tractorbynet, and if so who?
This is the...
Hi All:
It's been about 8 years since my last post (and these are my sins, oops wrong forum!) Anyhoooo... I just got my Kaboodle back after a complete going through with a new seat, new...
After using my 2200 on sat, I started it on monday, and all hydraulics were gone. No bucket lift, no 3-pt, no transmission or pto. I'm wondering if I broke an internal shaft or pump. Thanks...
I was pushing back some of my frozen snow banks to make more room for the new snow and found myself high centered on some snow. When I went to dig myself out I saw a lot of oil in the snow. I...
I'm installing an auxiliary heater on a BX2200 and have a few questions. I'm using a 13,000 BTU unit from Mill Supply, typical setup. I'll be tapping into the system at the lower thermostat...
It's amazing how much has come full circle between these machines-
metal hood and fenders
oil, air, fuel and hydro filters match
almost exactly the same length with FEL
Gotta love what they have...
well with 635 hrs. the inside pins broke, then got in the main gear and did some other gears then put a hole in the bottom of the housing. I stripped the tractor down to get to the transaxle and...
I am having a hard time deciding on a Snowblower for my new Bx2200. Rear mount PTO blower for BX2200 should be a maximum lenght of what? I have a choice between two used Canadian snowblowers. The...
Hi, I'm new here and I've owned my bx since it was new. I think since 1999. I was was mowing the other day and all of a sudden it stopped moving. Upon further inspection I notice a trail of...
Hi all! I am new to this forum, but I've been using it for several years to make repairs to my BX. Extraordinary board here and I'd be broke if not for all the good information in here. I...
A couple of very loud bangs came from under the hood when I cranked up a couple of days ago, and upon investigation, I found an unhappy 3' snake considerably the worst for wear draped across the...
..Just got the BX2200.. No manual.. Took off the loader.. Snap.!! Now I have 3 hydraulic lines hangin in the breeze.. Two are rigid lines, 1 male 1 female.. One is flexible and female.. The...
.. Hey guys.. Well, I almost made it 24 hours after purchase of my first tractor before I started thinking of new toys for the big toy.. I've seen these grapple attachments and I want one.. Seems...
BX2000 (2001 w 600hr)
Turn key, starter tries to turn engine. the engine spins about 1/4 - 1/3 revolution
and then a loud CLACKING sound. Not quite the clickling sound from a dead battery.
If I...
Another in my series of hydraulic education classes.
I replaced my power steering hoses recently and now am having problems with my steering.
I think that I may have introduced some crud into the...
:( Hello all, I bought a used 2002 BX2200 with 198hrs, brand new!!!! awesome shape!!! I have not been sleeping for one week straight from all the excitement, torn about everything possible in...
I know that there was a factory defect on the early 2200's with the front axle seals. I had mine fixed once under warranty, once again last year, and now it looks as though it is leaking again...
Has anyone else had these lines wear a hole in themselves from the clamp? I had this happen on the quick-disconnect side and just made sure that the clamp was tight after I replaced the line, but...
I need some information off the tractor but am not near it...I would imagine there is some sort of ID plate on it somewhere with model, year, serial # etc... Can someone tell me where I might...
I've got someone that wants to buy my Kubota BX 2200...It has low hours and many attachments. Problem is, I cannot find a good source for putting a value on it. Is there anything out there...
Time to replace it, looks tough to get to, do you have to pull the deck, or pull the floor, neither? I don't see how to reach it, even with the tractor up on stands.
Thanks,
- Patrick
I have a 2003 BX2200 with 680 hrs on it. I am experiencing a loss of power after app. 20 mins. of operation. I have replaced the fuel filters with no change in problem. I tested the fuel pressure...
i have finally sold some junk and am looking at
purchasing a tiller for me bx2200 do you guys
thank it could handle a 4 foot tiller. neighbor has a
42" for his but i would rather have the 48" if...
I would appreciate some suggestions on where to start looking to track this problem down:
BX2200 starts just fine and will keep running as long as the key is in the "start" position. The second...
Have BX2000 with FEL and MMM . Have done a lot with that little buddy. Hate to part with it. It will be like losing an old friend.
But, 4 years old and although nothing wrong with it, I...
i have been having trouble out of my loader
quick connects leaking. i noticed the quick
connects have changed to a different style
from my bx2200 to the new bx2350. of course
my dealer doesnt have...
I am trying to plumb a log splitter into the hydraulics on my BX2200 and am not getting the pressures I expected (~1900psi). I tapped into the manifold block behind the left rear tire. This...
While loading the BX2200 on the tilt bed trailer today to bring it home from the dealer, I drove particularly slowly, hoping to take my time and thus pivot and impact the frame more gently.
When...
Hello,
There are 3 wires under the seat of my bx 2200. The one wire I connected a work light too.
Another wire has a male connector on it.
The last wire has a female connector on it.
I plugged...
Hey all, i'm new to the scene and considering purchasing a used BX2200 w/ 255 hours, garaged stored. Extras are a LA211 FEL, 60" MMM, and a Befco T30-150 3pt tiller. I'm in OH. We agreed to...
im needing to remove the floor pan on this tractor seems pretty
straight forward but to remove the dials for the deck height and
3 point adjuster(speed) im having alittle trouble. any secret to...
This week I tried to dig out lilac bushes for a neighbor after installing the tooth bar on my Kubota. It worked to a certain degree but failed when lilac roots could only be attacked by one side...
Several weeks ago, I got the BX2200 back from the dealer after having the Woods BH6000 put on. At the same time I got the new seat, replaced knuckles, and had the mechanical retrofit cruise...
i have been looking for quite sometime for a small tractor
and loader. i was figuring i would have to make a 10 hour
drive somewhere when a neighbor cam to me about a bx2200.
he has one so i am...
I seem to remember a thread about this but the search feature didn't find it. A friend is having trouble getting the PTO to engage on his BX2200. He said he has had problems with it since it was...
While I was out of town my teenager ran my tractor out of fuel. Now the tractor will start but will not stay running unless the key is held in the start position where it seems to run fine until...
Just today I bought a used 2002 BX2200 (Will be delivered Monday). 508 hours, Kubota snow thrower (good shape, with electric chute rotator), 4way valve, 54" MMM (excellent condition), turf tires...
I found oil filter 15241-32090 cross over= hastings LF523,
Fleetguard LF3591, Fram PH 3593, super tech ST3593A this has relief valve, also Napa Gold 1064, I have a cross over book for most...
This is a 5' Cycle Country plow that I attached to the bucket of my BX2200. I cut the push tube and welded on a 2" sq tube. I then welded tabs made out of 1/4' stock to the ends of the sq tubing...
I thought I'd pass along the modification I made to my original seat until I can get a new seat. I'll post pictures of some of the work I've done as soon as I can.
First picture is my BX.
Second...
Today I bought a 2001 BX2200 to give to my Dad for Christmas and wanted to get folks opinion on my purchase. The tractor has 400 hours on it, LA211 loader, 60" belly mower, 4' box blade and 4'...
I tore up the 3 hydraulic lines that extend out behind the right front wheel.
The three lines that are used with the FEL.
I downloaded the parts manual from TractorSmart but I could not
find the...
Anyone ever had any problems with this indicator light? (the blue one that will tell you when the headlights are on)
I can tell the headlights are on since they shine on the grill guard, but I'm...
I recently increased my lot size from about 3.5-4 acres of mowing to 6 acres of mowing. 2 acres are well manicured lawn and the rest is pasture field mowing. I currently mow with a 60" MM deck...
My fuel gage seems to have a mind of it's own these days. It shows "full" when I fill up the machine, then acts "normally" as I use fuel.
At about a half tank I can see the needle move to empty...
I have a 2000 BX2200 with 500 hours on it, 60" mmm and FEL. Trading to BX2350 comparably equipped. Dealer has done all the service on the BX2200 so he knows it has been well taken care of.
He's...
While I was cutting the grass on Saturday, the mower on my bx2200 snagged a big rock out of the ground and got wedged half under the mower deck.
I heard some loud rock smashing and then the...
While cutting the grass on my Gravely Tractor today I managed to get hung up on a spruce tree root sticking up out of the ground. I couldn't back up or go forward without the back wheels digging...
I bought a used 2003 BX2200 and it came with AG tires but I'm thinking for the summer for cutting the lawn the turf tires would be a better bet so I have been googling and found a store in NJ that...
I am trying to buy a rotary cutter for my BX2200. Owners manual says max 42" and 300 lbs. The lightest I have found is a light duty Bush Hog Squealer at 356 lbs. All others are 400 lbs and...
The main hydro hose to my loader keeps disconnecting itself after raising the bucket to it's upper limit. Anyone else had to reroute these lines to avoid this? This is the Kubota loader, not a 3rd...
I have a 2002 BX2200 with 60" MMM with mulching kit. The other day I was just finishing mowing about 1 acre of wet bermuda where the tractor was obviously working pretty hard ( I had to slow down...
After reading the forums on TBN for some time and talking to 2 owners of Kubota tractors, the wife and I went shopping and bought a 2001 BX2200 with 586 hrs. on the clock. The BX came with a...
Now that outside temps are hitting the mid 90s, my tractor looks to be running hot. I bought it used so i can't compare it to anything in the past. After about a hour of cutting the needle is...
After running for about 20-30 minutes at full throttle (while mowing) my tractor starts to die out but then gets back up to full throttle. I have bled the air from the fuel system and refueuled...
A guy I know has a BX2200 (4 years old, I believe) that he would like to sell. It has a 54" MMM, but no FEL. He has only used it to cut his grass and pull an aerator over his 1/2 acre yard, and...
i just bought this tractor used with 500 hrs on it, thought i got a great deal till i noticed the engine using about a quart of water a day. pulled the head and noticed the crack in #2 cylinder...
Was out mowing, started smelling hydraulic fluid, stopped and looked under, trans fluid everywhere, all over deck, basically pouring out from some place above the center PTO output shaft (which...
I'm not using it enough--though I LOVE it. Almost 4 yrs old and only 100hrs. Have alot of $$$$ tied up in it, and it's almost paid for. But it takes up one stall in the garage, and my truck...
I was thinking of trading my BX2200 for a BX24 so that I'd have a backhoe but the dealer said buying the Woods BH6000 would cost me a lot less money then trading. He gave me a price of $5500 for...
OK, I want to clear one thing up right off the bat. I grew up in the city...Huntington Beach, CA to be exact and lived in a 2bdrm apt with my single Mother and 2 brothers, no yard. I moved to...
I know that it is hard to believe, but I have owned my BX2200 for five years and never checked alignment of the MMM until this weekend. The left front anti-scalp wheel was worn completely flat...
I finally bought a new 60" mmm deck for my BX2200. Unfortunately the owner’s manual was not with it. My Dealer will order one, but I need to get the grass cut this weekend. I think I can take a...
Does anybody know of a full cage for a Kubota BX2200. I'm getting all crippled up and am having problems getting on and off my tractor and it would be helpfull if there was such a thing as a full...
What is the best way to REMOVE this drive belt?? Mine has a few splits in it, and it's time to replace it. I've got it out of the pulleys, per advice from other members in the forum. I've removed...
I'm a new Kubota owner and I'm not sure how to get the 60" mower deck separated from the PTO, so I can remove the deck for blade sharpening.
I searched through the forum and I didn't see any info...
For some reason my bx keeps shearing the roll pin in the front drive shaft. has anyone else had this problem or heard of such? I can't see how the pin is shearing as the shaft is splined...
I've a neighbor whose 73 yr old father gets bored. He also happens to have a machine shop. After looking at all of your pix of sliders replacing the turnbuckles on the BX series I decided to...
My wife gave me a canopy for Christmas for my BX.
She ordered it from Sun Guard Canopies at Sun Guard:If you have a tractor ROPS we have you covered.
The first pic is a side shot.
Second is one...
I have a man that is insistent about buying my tractor. I told him I would be reluctant to sell it but he keeps saying "name your price". Whenever someone tells me they would be reluctant to sell...
After three years of clearing land and other misc. work, all of the lights are either broken off or dangling. And the blinker indicator shows that they are on. Wish I were more electrically...
Hi,
I noticed some fluid dripping from one of my LA 211 Loader hydraulic lines today - the hose with a male end that comes from the "Power Beyond Port" and has a male end that connects into the...
Hi
When we put in our patio, we had a 2.5'x2.5' square pad of concrete, that is about 6-8"" deep, moved over by our dog kennel, I had thought about digging into the ground so it would lay flat...
I started a thread a few days ago on this issue, and don't know if anyone is interested or not, but finished the project last night and everything seems to be working fine. It was difficult, but...
I posted a thread the other day on the coolant leak on my 2200.
I got the new water pump yesterday and am planning on replacing it tomorrow.
Any advice , tricks, etc.from anyone out there on...
I am interested in selling my BX2200. It has the 60"mmm and FEL as well as bar and turf tires. It also has less than 80 hours. The turf tires have less than 1 hour on them. What price can I expect...
I have a BX2200 with a 4 foot blade that I want to drag/grade our 100 yard long driveway with. The problem I have is the blade will not dig down but just skips over the top on any compacted...
Hi:
This is my first time posting. I have a 3 year old BX2200 4WD that I bought new and have had very few problems with it. I use the tractor mostly to mow with and some small tasks in the...
I finally found a place to upload the video, bring on the safety police and the you gonna break it police, and the you can't do that with a hydro police!!!
http://www.youtube.com/watch?v=aHEmvPhwu8Y
My starter refused to work. All electrical idiot lights + fuel pump seemed to work all right.
I finallly discovered that a "white wire with black stripe" runing from the switch to the...
Hello, found this site while doing some research on a tractor. I have been searching around and learned a lot.
I found a 2003 BX2200 for sale with a FEL and 60" mowing deck and a rear blade...
I'm going to figure out how to post pictures soon...and I'll update them when the Woods 6500 hoe comes in in a few weeks.
In the meantime I have a question regarding the proper toolset to...
my tractor has a grinding noise from the front end when in 4wd and the bucket full of dirt.. anybody have the same experience? the tractor has 500 hrs and i am the original owner. i only engage...
Hello, I'm new to the forum so go easy on me....
We will be redoing our 2 acres' landscaping starting this month. It will be a couple years project and I may want to take the whole landscaping...
Is anybody actually running the Gator #90987 blade (with adapter bushing for the spindles) in the Kubota BX2200 60 inch deck? I have the bushings, but I see the blades are slightly longer...
I changed the oil in my front axle yesterday. Most of oil drained from the first side that I removed the drain plug from. Upon refilling with oil, I assumed that the new oil would freely pass to...
Was topping off my BX2200 in the shed and there was a little deisel left in the can so I squeezed it all in the tractor, put the cap on and made a mental note to pull it out and drive it a bit...
I had a power steering hose rupture on my BX2200 (leaking on top of the mower deck.) I have seen the problem reported here under several threads. I delivered the tractor to the dealer for...
After the tractor is used for awhile, when I shut off and try to start it later, it sometimes will not start. On a cold start, it has always started with no problem, until today. Would not start...
I have incountered another leak, this one is the gear box for my 54" MMM. The leak is between the gear box and the belt pulley, has anyone had this problem. Also power steering leak can anyone...
Hello all,
I completed my 300 hour maintenance on my bx2200 this weekend. It took most of Saturday to complete. I do have a couple of questions though.
Oil/Filter – 10w30 kubota brand – no...
I removed the mower deck on my BX2200 today and the shaft to the front axle was hanging loose from the front axle. There was no connection to the transmission. Obviously, something fell off. I...
has anyone found a way to repair the steering hydraulics to keep from having to replace the unit every two years or so. i am on my second steering unit because of wander unless i jerk the...
My bx2200 starting leaking hydraulic fluid near the block. It looks like there was a relief or drain valve where the leak is. Can someone help me stop the leak?
I have a co-worker who has a bx2200 and was looking to buy a loader for it and he has found 2 locally and he's not sure what to do,I said I would ask you guy's right here.Here's the deal an older...
I am looking to upgrade my BX2200, so I am wondering if you folks have any thoughts on pricing on the B7510HST w/loader? I have not tried talked to the dealer yet.
Here is what I am thinking...
I already have the redesigned part, I was wondering if there is another redesign to beef this up for if it's just going to keep breaking every 200 hours.. ?
Thanks,
- Patrick
New to group and forgot to attach schematic on original post. I have a BX2200 I bought used (155 hours-now at 385hours). Water has shut me down each time it rained and the tractor got wet. I...
I'm a new poster as of today but have gotten many great tips over the past 4 years from this forum. A little background, I have a BX2200 with 347 hours on it. I use it to maintain 6.5 acres of...
After doing all the maintenance on my deck, sharpened blades, etc.
There was a vibration. I just thought my blade sharpener made one unbalanced during the lateest sharpening.
While mowing (a...
Has anyone else had a problem of recurrent water in the fuel system? Let me tell you what I do know. I have had the leaky fuel tank upgraded. If I leave the BX out in the rain I will get water in...
Still trying to decide what to buy to take care of our new house on what is currenty 4.5 acres of dirt. I fear that I am beginning to get that whole "paralysis by analysis" bug, as I have been...
I have read the old posts on the old steering problems and the service bullited from 2001. The problem with mine is that I purchased mine in late 2002. Does anyone know if Kubota will still...
I've got two issues that are probably related -- first, my three-point control lever is very stiff and hard to move, and as such it does not reset to the center point when the hitch is in full up...
I think this is ok to post here, since they are a sponsor. I saw one of the popups here for Homestead Tractor ROPS (wouldn't you know it, now the ad is not showing!)
I emailed to ask if they...
My '03 BX has only 195 hrs but I noticed the coolant expansion container was low so I added fluid up to the mark and went out and worked for a few hours. I noticed an antifreeze smell a few times...
Hi everyone! Spring checkup has arrived 2 weeks left on warranty small leak on shaft mid pto. Is it a big job to fix or what gives? Love the tractor, thanks for input.
Recently "graduated" from a MF 135 to to an '03 BX2200 with 195 hours. This unit came with manuals for everything except the FEL. Is there a source out here somewhere or is someone willing to...
Has anyone disced with a BX? I'm considering buying a 45" 3 pt. lift tandem disc to use for food plots, but want to make sure the BX will be able to lift it and pull it. It looks like the disc...
I found a used 2003 Kubota BX2200 with the loader, box scraper, rear forks. It has 300 hours on it and looks great. It also comes with a trailer so I can haul the tractor to different sites...
Hi guys,
I felt compelled to register and ask a question after talking to my local Kubota dealer. I have a 3 yr old BX 2200 w/ a little over 300 hours on it. (extremely nice shape) I...
I understand that some of the new Bx series tractors have larger front wheel tire combinations. has anyone with a BX2200 put larger front wheel/tire combos on theirs??
HELLO,
New poster here. I just got home with my new entry into the compact tractor game. a bx2200 with 1100 hours that I paid just under 5k for. It seemed to be a good deal to me. great story...
Could anyone tell me if K2561-82140 is also the number of the updated air cleaner support? This is the pn that is in my parts manual and what the dealer has in stock. I've read in some posts that...
Has anyone found a golf cart cab that will fit over the OEM BX2200 canopy (sun shield) or is sandwiching it under the canopy the only way to make it fit? What are the dimensions of cabs that you...
I have a short in the headlight circuit and was wondering if anyone else with a BX2200 has had this problem. There is a brown wire coming from the hl switch and brown wires going to the headlights...
Hi,
We just moved to a house with 4.5 acres and a 440 foot long Driveway. I also just bought a BX2200 with 298 hours and a FEL (#211) with a 60" MMM.
Our new asphalt driveway was put in last...
I installed the snowblower for the winter season today. The question I have is the movable support that holds up the PTO shaft on the blower, does it remain up and in contact with the plastic...
hi, i have a kubota bx2200 new woods front end loader
and 60 inch deck, in Tracy California, (just outside
Sacremento) . It was for sale on consignment, but
the individual there has lost...
I picked up some new front tires (bar style) for the BX and when I got home I noticed they were 1" wider than the tires that were on it (18X9.50X8 vs 18X8.50X8). Does anyone see a problem...
Well My BX has started leaking fuel again from the sending unit.
How many have had this re-occur after installing a kit in them?
I honestly am beginning to wonder just how many times this part...
Just a heads up for folks with a Bx2200. Mine has about 350 Hrs and has developed a hydraulic leak in the steel supply line to the loader valve where it crosses over the frame. There is a small...
There is a used Kubota BX2200 in the local paper that I may be interested in looking at, but wanted to make sure the price is reasonable before I called on it.
The year isn't listed, but its a...
I had to move closer to my job and was unfortunately forced to down size my property size and the BX as compact as it may be is just too big for me now . In all reality I could get by with a large...
looking for hydraulic filter number . Looked under the tractor and couldnt find the number on the filter, must be turned to the top. also does anyone know the fuel filter number. Thanks in advance.
Dad had the tiller (set up to run behind his JD 455, cat. 0). I'm trying to work a deal to trade for the BX2200 (cat. 1). The 3 pt frame on the tiller will hitch up to the BX fine, the problem...
Have any taken a good look at what is involved to replace the fan belt on a BX2200 OR BX2230?
Due to the way the engine is mounted in the machine it looks to me like a Major undertaking.
I...
I am new to this forum... wished I'd found it years ago. Anyway, I am looking at posibly upgrading from my BX2200 (which I love), to a new BX23.
1). What should I get for the 3 year old BX2200...
I have a BX 2200 with about 225 hrs. The last few times I have mowed I have had a hard time controlling the tractor. The power steering effort is normal but I have to fight to keep the tractor...
A couple of weeks ago I was digging with my BX and it quit like it ran out of fuel First thing i did was change the fuel filters i started it and it ran for a minute and quit again , i figured...
will start to move forward and will creep, but push on pedal more and hydro seems bog down not the engine (sounds like and acts like when raising 3pt. hitch and holding lever in the up position)...
I have a kind of strange favor, if anyone who owns a BX2200 could measure how high the end of the 3 point arms are in the up and down position, I would appreciate it. I am working on a new post...
Hey guys,
What is a BX2200 w/FEL & MMM worth? It is in excellent shape, want to say the MMM is 54" or 60" and the tractor has 98 hours on it and is in excellent shape. Not sure if they put more...
Hello,
I have a Kubota 70000-73274 engine block heater that I originally purchased for a BX2200. Well, the BX2200 got traded for a BX23 before I installed the heater. Will this block heater fit my...
My BX2200 is approaching 600 hours, used mostly for mowing. However, it has done quit a lot of loader work as well. When I mount my homemade weight bar on the tractor as soon as it is lifted it...
I searched all the threads and still can't find a mention of my experience trying to level the deck, and the manual is confusing.
What I am experiencing is that when I lower the deck to my mowing...
Help anyone? Please?
I have a 3 year old BX2200 w/ FEL and approx 450 hrs. I have experienced the usual problems w/ fuel tank, fuel guage sending unit seal, steering failure, etc., all of which...
Bx2200 w/60\" mmm
I've been looking on this and a couple of other forums for close to a year now trying to decide on a garden tractor. I still couldn't make up my mind. Well yesterday the guy...
BX2200 and 72\" finish deck
I was wondering if I could use a 72" finish deck on the back of my BX2200. I have a lot of grass to cut (10 acres) and every little bit helps vs the 60" MMM. The grass...
BX2200 60\" MMM
I just noticed this weekend that my deck when lowering it seems to be a bit uneven, in that before it reaches the final drop position, I notice that the left edge of it lowers a...
Just a few questions for you guys, I purchased my BX2200 in 7/02 so I guess I am still under a powertrain warranty, do you think that covers repairs to hydraulic hoses. It looks like one is...
I have posted on the thread on the bx fuel problem and rec'vd no replys so I thought I would try this route.I have just purchased the repair kit for my bx this morning(new sending unit plastic...
Does anyone know if you can get a filter at NAPA or any other parts place to Replace the Kubota one. Not that i dont want to use kubota filter but dealer is about an hour and half away and i would...
Hi,
I have a BX2200 that I bought new in 2003 (last year of the 2200 I believe) with a 60" mm. I use it to mow 6.25 acres almost every week during the summer and to plow our drive during the...
I noticed the newer models with backhoes come with a fold down ROPS. This has been a desire of my since first purchasing my BX. It would make my storage situation much better if the ROPS folded...
Where can I purchase matching paint for my BX2200, preferably in a spray can? I purchased a can from my dealer, but it had a serious brown tint (yes, I shook it well). I bought an aftermarket can...
Can anyone tell me if a John Deere 8A backhoe attachment
will work on my Kubota BX2200? Not sure how many horses are needed to power this and will its subframe mount bolt up with the proper...
I am shopping for a grass catcher/leaf vaccum for my BX2200. I mow about 1.5 acres, not heavily wooded. So far I am considering the OEM attachment, Cyclone Rake, Agri-Fab, and Trac-vac. Each has...
Attached find a picture of the D905-E engine block,The bolt (ref.#220 ) can be replaced with a block drain in order to better facilitate the coolant change every two years.
The Kubota part number...
I seldom adjust the down speed of the 3PH lift mechanism. I recently discovered that the control is stuck in one position. I have tried lubricant, push/pull knob, and looked for some method of...
My BX2200 is stuck in low gear and even after following the
recommended pressing of the forward/reverse pedal, its remains stuck. I have rocked the tractor back and forth without any luck...
While at the dealer getting another part (see Lower link bent <font color="blue"> </font> ) I told him I need another front weight because I thought only 4 will fit in the weight bracket. He...
The conversation about the BX fuel leak has gotten my attention. My warranty is up next month so I'd like to drop the tractor off at the dealer for any last minute issues. I'd like the fuel tank...
First time this happened - I have a 2001 BX with around 350 hours. This is the first time with any problems. Filled up the fuel tank for the first time this spring and the diesel leaked out...
I was just wondering if anyone made one that would work on a BX. I seen another post in owning and operating were someon posted a pic of a small tractor with one on it . They were mowing a bank...
does anyone buy filters other than Kubota? If so what kind and where? I Can't seem to get the same filter twice and worry about getting the wrong one. Thanks
Is anyone aware of a lawn striping kit that would work with the BX2200?? I would sure like to have this look on my couple acre yard, and I mow with a 60" MMM. Thanks for any input.
Rook
Does anyone know if there are any cross reference hydraulic filters to replace Kubotas K2561-36990 . Would like to be able to purchase one from an auto parts dealer rather than through Kubota...
I'm the proud owner of a new '05 BX2230 with a 60" MMM that I'm going to install a Woods BX6000 Groundbreaker-X back hoe on later next week. Saw the thread on the Deere 2210 install and said I can...
While at the parts counter at my local dealer, the tractor salesperson saw that I was picking up parts for a BX2200. We started talking and before long, he had me interested in the BX 23. (which I...
I am started to feel like I’m beating a dead horse here but ……. if anybody has a clue if any of the 50cc units listed in the attached chart would be the same, please let me know.
I notice there...
I posted a few days back about a small leak my PS unit had - has. The pump man seemed too slow for me so I picked the un-touched unit up from him hoping to get it to someone else here in town to...
How much weight have you had on You Bx's 3 point hitch ?
Was this with front end weights? Loader perhaps?
I know what the manual says but I would like to hear some of the real figures.
My meter stopped working at 150.3 hrs. I hooked it up directly to a good source and can here it clicking but it does not roll anymore. Shouldn't this thing normally last a lot longer or did Kubota...
I finally decided to attempt to fix a very small hydro oil leak coming from somewhere under the steering unit. The tractor is out of warranty but I still decided to take it to the dealer. $108...
During my first year of mowing with the BX2200, I used the blower and bagger. It was a lot of work. For the last 4 years I've used the mulch baffles and blades. It functions well in addition to...
I have a good-sized former garden spot that is so thick with Centipede grass. I'd like to move some of it using a sod cutter and my FEL. I looked through the Woods website and didn't see anything...
I have turfs on my 2200 and am thinking of going with more aggressive treads for FEL and dirt work.
I know there's been a lot of posts about tires, but I'm interested in how wide each of these...
Hi
I am a new member and have been following the forums with interest and have decided to purchase a bx2200 with FEL,mid mower and backhoe for my small lifestyle block. I live outside Los Angeles...
I kept reading the posts about grapples and decided to build a small one for my BX2200.
I don’t plan to do a lot of heavy work with a grapple so I made it to suit my needs.
When I trim the trees...
I don't know much about hydraulics, but would a BX2200 be a suitable host for a three point hitch driven splitter?
A guy down the street from me has one for sale, and since I don't want to pop...
(also posted in oils fuels)
Hi all!
I'll keep this simple. I need to go synth because I store in an unheated shed, and I had alot of trouble starting when REALLLY cold.
I'd like to go with a...
Hi,
I'll keep this simple. I need to go synth because I store in an unheated shed, and I had alot of trouble starting when REALLLY cold.
I'd like to go with a WIX filter and synthetic oil. I...
Changed the stabilizer links from the PITA turnbuckles to the telescoping links some time ago, just got around to putting on the finishing touches. They worked just fine the way I had them, this...
Just put on my cruise control (nice instructions from Kubota by the way - always good to use your prototype parts for your manuals)
And while nothing quite equals the joy of the new lever on my...
I am thinking about buying a cab for my BX2200. The central NY winters are getting too much for me.
I have been looking at the Sims and Curtis cab literature. Do any of you guys have cabs for...
The 15 amp fuse that is for my gauges and instrument panel lights blows quite often. I replace it and it lasts for a couple of weeks to a month and then blows again. Does anyone else have this...
Under the seat of the BX there is both a male and female exposed connection. The female has power to it. Is the male a ground?
I want to hook up one or two Plug-ins (cigarette light type) for...
Just finished installing a stepvan heater (part#55-322) 15,000 BTU's $102.49 and comes with 3 speed switch. Total cost came to about $150 with fittings, hose, clamps, anti-freeze, shipping, sales...
I had previously found a website for Kubota parts where you just entered the part number and you would get cost and availability. Unfortunately I did not bookmark the site and I am now unable to...
Is it possible to increase the lifting capacity of my BX2200? I lift alot of moist dirt and it Just doesnt seem to have enough power. Is there an adjustment on the hydraulic pump? Larger rams...
I plan on using the BX loader and back blade for snow removal this winter. We just purchased a 10 acre hobby farm and need to use the BX for this year only. By next winter I will have my Dad's...
I am looking to purchase a rear blade for a BX2200. I will use this primarily for snow removal. We don't get much snow where I live in KY. Usually never over 4". I can only remember us getting...
bx2200 3pt won\'t stay up
Suddenly the 3PT hitch on my BX2200 won't stay up if I put any weight on it. Any ideas? Is there some sort of check valve in the hydraulic system that could go bad?
Charlie
Today, I needed something to push some dirt and decided, since I had the steel, to build a small dozer blade for my Bota. I had a job where I needed to move some tilled soil "uphill" to level out...
After five weeks at the shop having the Hydraulic Control Valve Assembly replaced My BX came home with what I like others thought to be a sticking Speed control pedal( Travel Foot Pedal)
After...
Just bought a used BX 2200 and the owner could not find the operators manual. The tractor has 60 hrs on it and is due for the 50 hr svc. I do have a call in to the dealer (who has not returned my...
The review posted by raudabt a few days ago was the only negative post I've ever seen of a BX. Anyone else have the problems he was describing? I'm looking at a BX23 and wondering if that...
I have a BX with the 54" MMM and Kubota bagger and adore the whole system. Its time to think about new mower blades and I'm confused about high lift ones. What is the right choice for use with...
Well, I finally got around to installing the block heater in my BX2200. I bought it last winter after having starting problems in the cold. I had read some of the installation problems here and...
I know I have read some posts a while back about height concerns with the bx and certain post hole diggers. With the 3-point modification to allow the 3 point to raise higher has anyone...
Anyone upgrade/replace the stock lights with brighter bulbs?
Been searching the net, seen alot of LED bulbs, some halogens, all claiming to be much brighter than stock 1157's (or whatever's in...
We are looking at buying a new house that will not require my BX2200 for maintenance. I bought it in 2003 and it has 42 hours.
Can anyone recommend a "For Sale" type web site for tractors if we...
Bought a Used BX2200 -- How\'d I Do?
I bought a BX2200 this weekend. It's a 2000, has 245 hrs., and came with the 60" MMM and loader. It was used mostly for mowing and moving snow. Was...
I recently traded-in my BX2200 for a BX23 and I noted the following last weekend when I attached my older snowblower to the BX23...
Basically everything fit just fine with a couple of small...
New problem need your help before I call the dealer.
BX has 220 hours. The 15 amp fuse, position 2 on the fuse block under the steering wheel. The fuse for accessories, including the hour meter...
Well at approx 1year and 137 hours I have joined the club of broken straps. Was cutting yard today when things got a little noisy and checked under the hood and sure enough the strap had broken...
Hard to fit the entire rock garden into the picture, but she did it all with her BX2200 this summer. Well, maybe I moved a couple of the bigger rocks ....
I was mowing around the house today after sharpening the blades of my rottery mower and when I went to disconect the pto, the housing was very warm. About 20-30 minutes.
This is the first time I...
BX2200 60\" MMM on a BX23 ?
Hello,
I'm thinking about trading-in or selling my BX2200 for a BX23; however, it's not clear to me at all whether or not my 60" mower (the Kubota model for it is...
I'm a fairly new owner of a used BX2200 and have noticed there are noises that change depending on the implement in use. It really gets annoying if you put weight in the FEL or on the lift on the...
My new L3830 should be arriving next week! I just got back from signing zee papers for the 0%financing. Talk about cutting it close.....I'll post some pics when she arrives.
-L3830 w/ non-loaded...
Anyone else experience a worn looking belt after 400+ hours?
Seems a bit too soon to me. Of course this could be my excuse to add the alternator upgrade and some 747 landing lights!
I just bought a BX2200 with a MMM and would like to use a rear blade without removing the mower. It says in the manual you can lock the mower in a raised position but the knob on mine will not...
Hello all,
I'm having trouble maintaining an idle on my BX2200. Water in the fuel shouldn't be a problem as I have recently changed the filters (I have had problems with water in the fuel before)...
I have a set of turf tires that came on my 2003 BX 2200 that I would like to sell. They have less than 1 hour on them as I changed to bar tires when I had the tractor delivered. Does anyone know...
I know this has been asked 1000s of times, but I am looking at a 2002 BX2200 with FEL and 60" deck. It has 360 hours on it. The dealer is asking $9999. What do you think is a decent offer...
Cannot find a thread about this, sorry to revisit. Looking for a rotary cutter for BX2200. Looking at the Woods 42" estate series @ $630. Also looking at J-bar 48" Razor cutter @ $520. Any...
I seen a discussion on this topic, but could not find it by searching. I was looking into getting one and my dealer said that woods is the only one that would work on th bx. i was hoping to find...
I know that this subject has been discussed before but I wanted to get some current feedback........I'm interested in a quality metal (diamondplate??) canopy for my BX2200. Using the tractor in...
Blew a couple of hydro hoses....been an ongoing problem....another story.
Anyway, had to disconnect 3 of 4 hoses to steering unit under dash...thought I had remembered where each goes. Guess what...
Hi guys, been a while since I visited. I have a question that I hope I can get some help with. While running my BX the past few times I noticed that the engine would sputter now and then, and...
I was having a strange vibration type noise that would come and go and seemed more prevelant after a half hour or so of mowing. It was significantly loud enough for me to stop the mower the first...
Anyone replaced/upgraded their oil drain plug to a valve type?
I have seen these for cars that get frequent oil changes, but can't find any for my BX.
The oil plug on mine feels like sometime...
Has anyone had the opportunity to replace the front axle oil seal on a BX2200? I am going to attempt this change shortly as mine is leaking. Any help would be greatly appreciated before I start...
I have a BX2200 with 450 hours. It has just developed an engine oil leak at the front of the engine just above the front axle. I am unable to tell if the oil pan is leaking or perhaps the main...
I've had great luck with the BX2200 for a little over 2 years now -- 4 months beyond the warranty period. But, both my wife and I noticed that cutting with it yesterday was like trying to steer a...
Anyone happen to know what the wire (and plug) are for that is located on the top of the engine on the BX2200?
On mine it is right by the air filter.
It looks like another opportunity for me to...
Has anyone tried this yet? I am sure I am not the only one who has a desire for a more comfortable seat.
Now that I have seen the BX23's seat I am thinking about changing over if they don't want...
Here's the problem. When I mow, in particular, I bounce around a fair bit. The auto-retractor seat belt takes every advantage to tighten, and doesn't let go. Every few minutes I have to stop...
The lift on my BX2200 will not completely raise without returning the lift lever to the center and back up several times. Each time it stops, it "thinks" (or sounds like) it is at the top. This...
Hi all,
One thing that really burns my shorts is paying the kind of money that I have for my tractor and then having to pay again to get proper documentation on the product.
What the heck can...
Hi all,
Sure glad I found this place. Can anyone shed some light on proper handling of diesel.
My beloved tractor has now been the victim of water in the fuel three times (white smoke, no...
anyone else having trouble with soot in the air filter. I did about fifty hours of snow blowing this winter. and checked the filter this spring and it was black. Blew some of it off and put it...
My BX2200 overheats after only about 30 minutes of mowing with 60" mid deck.
Coolant level is good - screens are clean - oil is good.
Could it be a bad thermostat? If so, how big a job to...
What did Kubota change from the BX2200 to the BX2230. The local dealer has a new 2200 with a 60' deck that he said he could sell for less than $8k. I know that the 22 is the old model. But for...
I am getting ready to change the hydraulic fluid on my BX2200 as part of the 300 hour service. I use my LA211 loader quite a bit and would like to make sure the dirty hydraulic fluid in the lines...
I found this forum today looking for help rebuilding the center spindle of my MMM deck. I have just read through 6 pages of valuble information reguarding grease. Grease is the cheapest mechanic...
First I'd like to thank everyone again for all the helpful info in this forum. It really helps. Heres the break down:
2003 BX2200 (63 hrs)
60" MMM
3 pt Boom
Log Splitter (very medieval looking...
After cutting my yard and washing down the tractor I noticed rust bubbles around the base of the rops bases that are bolted to the rear fenders, has anyone else experienced this problem yet?
Help, our BX2200 ran out of fuel. Tried what the manual said to do to bleed the lines and it didn't work. What should be done next? Anyone know how to manually bleed the fuel lines?
Is there any remedy to the BX2200 PTO rough engagement? Mine actually sheard the shear pin on my Rhino Cutter, but I was at full throttle when I engaged. Does moving the PTO lever slowly help...
Unfortunately, I purchased a set of turf tires from a bx1500 off of ebay last night. This is unfortunate due to the fact that after I placed my bid I did the research and discovered the 1500 has...
Using the rake the other day, just happened to hear a metallic clink when lifting the 3pth. Found the right upper lift arm's hairpin clip on the ground. What happened - the lift arm pin evidently...
Ok.. I know most of you came in here to tell me that the BX22 and BX23 have a sturier frame etc etc and so they can do it but the BX is not beefy enough for the task. Thanks for dropping by, but...
Howdy, I'm kinda new at this, so bare with me here. I got a BX2200 with 250 hrs that I bought new. At about 200 hrs I noticed that the steering has a problem with turning left. The specifics...
So what do you think ?? Is this possible??
Here is the link
link
Or how about a 2003 KUBOTA M9000 HD for $5400
link
Or a 2003 KUBOTA MX5000 DT for $3800
Link
I am thinking its too...
Hello all,
I am planning on buying a Kubota BX2230 in the future but ran across a used 2000 model BX2200 with 60" deck and FEL for around $8900. The tractor has 165hrs. on it. Does this seem...
I was cutting the grass this afternoon, and notice a small amount of oil leaking from the left outer pivot on the front axel. Has anyone changed these seals themselves before? I'm thinking...
I haven't even had a chance to get to the dealer yet. What the heck is a brush hog, just a heavy duty RFM? Two blades? How big of one will the BX run?
So much to learn so little time (or $$$)
Hi All - I 've been watching this site for a couple of weeks and gathering some very useful info. Thank you. I'll get straight to the chase I'm looking to purchase a sub-compact and have pretty...
BX2200 won\'t start
I was cutting grass on Sat, going along just fine for about three hours. Wife came out to tell me something and I turned off the tractor. Now it won't start. I was...
Is it me or do others have issue with wheel lift and near tip-over when carrying a load with the FEL, even on an ever so slight 2% grade. It seems to be more right sided than left (90/10).
My...
Hi all,
I currently own a 2002 BX2200 with FEL. It has 325 Hours on it.
The dealer will sell me the BX23 for $15,500 and from what I have read on this site, that is pretty good.
They are...
I'm having a huge amount of fill delivered to level off a area behind the house for entertaining. I estimate it will take around 100+ cubic yards. The closest the dump trucks will be able to get...
I am thinking of ordering a quick hitch from Northern Tools #12835 ...is anyone out there in Kubota land using one of these on your Bx2230 and if so, how do you like it? Or better yet will it...
working with the FEL yesterday, picking larg rocks out of the woods for my garden, all of a sudden hydro fluid blew out the left side of the FEL, all over my hood side and arm of the FEL.
I shut...
I saw a post where someone referred to the air filter bracket for the BX2200. I just bought a new bracket to replace my broken one but it appears to be the same thickness of material as the broken...
I am trying to decide between a JD 2210 w/mower and box blade and a Kubota BX2200. I went to deere.com and was able to get a list pirce on the 2210 using their product configurator but I did not...
I have a significant amount of fuel leaking from around the sending unit for the fuel gauge. It looks like the rubber grommet has shrunk and does not seal anymore. Someone mentioned to me that...
It looks pretty promising that I will be purchasing a 3.2 acre valley across the street from my home. I am purchasing it mainly to protect my view. It is not terribly builder friendly as it has...
New on the block here. Also new with the tractor and need some help.
I just got a used 02 BX2200 with only 122 hrs with FEL, 54" MMM and tiller, all for $10,100. Do you think this was a pretty...
Greetings folks. I'm new to this site, as I just stumbled on it two days ago. Been trying to catch up on some of the problems some folks have had with the BX2200. I've had the leaking fuel, air...
5\' box blade on BX2200
Yesterday I thought about how we often hear the question of tractor/box blade size and workability...
I had the good fortune of getting some dirt dumped beside/on my...
All,
I own a SuperWinch 3500 and wish to use it with my BX2200. I'm wondering if the stock alternator will power it. The minimum winch requirements are: 60 amp alternator with a 440 CCA battery...
Can anyone tell me if the BX2230 seat goes back further ( Ie more leg room) than the BX2200. I drove my neighbors BX2200 yesterday and it seemed cramped to me. I'm six foot and I felt like I was...
My faithful BX 2200 died yesterday while my son was mowing. It wants to start (turns nicely) when you turn the key to start, but as soon as the key is released, it dies. The BX is 4 years old...
i was wondering if you should check the fluid level by twisting the dipstic all the way in or by just sticking in without threading it in,,,, seems like my dealer told me to screw it in, but cant...
bx2200 60\" deck maintenance
I remembered that last year my deck was getting a bit noisy, so I knew that the first thing this spring I wanted to go over it. I changed the blades (bought new ones...
I have a 2001 BX200 with 60 inch mower & loader. Can someone give me an idea what it should sell for? It has 144 hours & is in excellent condition. I'm in lower Michigan.
Does anyone know of a front mounted "thatch rake" that will fit a Kubota BX2200 with minimal adjustment/customization?
By "thatch rake" I'm referring to those spring-loaded, steel-tined rakes...
I purchased the BX2200 on 5/3/01 and when I called the
dealer about the warranty on the powertrain which is the front
axle assembly including the seals They state it is only warranted for 2...
I can not find the post about drilling new holes in the lift arm bracket to raise the 3 pt higher. Anyone have the link to that post? Trying to figure out how high on the bracket to drill the new...
Leveling BX2200 60\"MMM
What is the best way you found to level the 60 MMM? Manual says to lower to setting 2, if I do that, I can not get under the deck to measure on the left side. Also if it...
I searched the forum under this phrase and found nothing on it. Can someone tell me where to get some weights for my 2200. After loading some dirt in a truck and without the tiller on the PTO, I...
While in my garage yesterday I just happened to notice that my BX2200 leans slightly to the right (about 1/2 inch) if you're looking straight on at the grill. The garage floor is perfectly level...
A while back Junkman wanted a picture of my BX with the sweeper so here it is. I used it tonight to sweep stones out of 2 of my Uncles yards, it worked pretty good except where the gravel road was...
What are your thoughts on an electric spreader that would hook up to the three point? I was looking at tow behind models and they run close to 200 bucks for a decent one. I really wanted...
There are a number of equipment companies that make subframe attached backhoes for the BX2200 nothing was offered by Woods. Looks like one will be available from them soon. This is a response to a...
Last year I took delivery of a BX2200 with 60" MMM, FEL, and 5' box blade. After using it for a season I have come to the conclusion that it is just not up to the tasks at hand. Here in GA the...
Anyone installed Pat\'s easy change on a BX2200?
I was going to call them and ask, but didn't see a phone number. I did a search here on BX2200 and Pat and didn't get any hits.
I'm ready to buy...
I ran across the Kubota (Japan) web site that detailed the differences between the BX2200 (905) and BX2230 (902). The newer engine is 18% more powerful, relative to size. Here is the technical...
Before I remove the Hydro strainer I just wanted to touch base with those of you who have already done so so that I don't screw things up. Is it difficult to remove and re-install...are there...
Well, I pulled the snowblower off for the season and was very dissapointed to see that the right auger was mashed down very bad. At some point in the season I had sheared the bolt that acts as a...
I have the BX2200, FEL, box scraper, 60" MMM, and other small accessories. I built a home last year on a 2 acre area of cleared ground and have 8 acres of woods. I have used this tractor to...
I'm getting ready to change the Hydraulic/Transmission fluid on my BX but before I do I wanted to ask those of you who had NO problem in removing the Hydraulic filter and "strainer", since I read...
My local kubota dealer has this offer on the table, I will trade my bx with loader and deck with 165 hours for a used b2710 with kubota loader and will put a new deck on, as it currently does not...
Height adjustment knob on BX2200 MM 60\"
I have been having trouble adjusting the height on my BX2200 MM 60". It is very tight and for some reason when I adjust it to TOP, I can neve get it back...
Folks,
I used the BX2200 to move a sleeper sofa from the house to the garage yesterday. I usually stop the tractor while it is in the High range. Then when I go to restart I have to select the...
What started out as just a simple tire plugging or patching problem has turned out to be a BIG problem. I developed a leak in left rear tire 26 x 12.00 Multi Trac G/S Titan tire. I had put Green...
Wife\'s BX2200 On The Way
Ordered earlier this week. Price (net of $5,000 trade in for a Deere 345) was C $14,500 plus tax with 60" deck and new valve/FEL.
I was hoping they'd deliver it for our...
My tractor is three years old and has 225 hrs. on it. The mower belt is real sloppy while running, however I can still see the Kubota writing on the belt can it be worn out already. I remove my...
Having problem with small leaks on FEL. Fittings have been tightened up by the dealer several times, however they just keep leaking. The leaks are on the disconnects. Has anyone had the same problems.
Got my new HD alernator for my BX2200 today and I cann't read French or I think it's French. Does any one have an English copy of the instructions that I can down load. Will call my dealer...
For those of you with a BX2200, what kind of oil consumption rate are you seeing? It doesn't have to be scientific, just a rough figure from the dipstick is fine.
As a follow on to my questions in other fora, I'm pricing a BX2200D with deck and maybe FEL in the Toronto area.
I also have a Deere 345 with deck and front blower for trade.
Any input would be...
First time buyer. I've struggled through the green & orange war in my mind and the orange has won out. The hard part is over. I've found a dealer with a good reputation & seems very honest & easy...
Has anyone mounted front chains on the BX2200 ??
I know the owners manuals says don't do it, but that additional traction would be nice. We are getting tons of snow in NY this year and I have...
I have read that the JD 2210 has an after market fold down ROPS. Info Anyone know of any after market system for the BX2200?
I sent an e-mail to Femco, hope they will respond.
I am selling my 2003 BX2200 with 40hrs. it has the 54"mmm. I am in North Carolina. I am selling it to go to the B7610, I need a bigger tractor for my needs. I am asking $8600.00 for it and...
A limb broke the plastic housing around the 3 shifters on the right side. Shifters being the 3 pt lever, 4wd lever and turtle/rabbit lever. How in the heck do you get the knobs or tips of the...
I am new to this forum and this is my first post so please bare with me. I have been browsing for the past month or so and WOW! What a great source of information. I have been looking at the...
Last week I posted about my BX not starting in the cold. I have run it twice since getting it going and both times it started quickly but ran like it was missing a cylinder for about 30 to 45...
I know that this has been brought up in posts past but I thought that I would check again. Has anyone found a bolt on poly edge that would fit the LA211 loader on the BX2200?....if so where did...
Good prices?
B2410, HST, Industrials, LA352 FEL, 60"MMM, 290 hours...16,995
BX2200, Turfs, 60"MMM, 585 hours...8,495
Both look to be in good condition. Both machines are at a Green dealer.
BX2200 won\'t start in cold
It dipped down below zero last night and the tractor is in a Cover-it shed in the back yard. I usually leave the door open cause it's a pain to roll up and down so...
Thanks again Sandy for the photo. Blower is on and running. I'll post a few step by step photo's in case anyone else wants the info.
If you want more detail don't be afraid to contact me. I'm...
If anyone can help out I'd sure appreciate it. I'm just about ready to mount a bit of a custom snowblower to the front of my BX2200 and would like a "side shot" picture if anyone can take one and...
Has anyone tried extending the wheels farther out to make the tractor more stable. Ever since I added the FEL I've noticed the tendency to want to flip over alot more. I have actually rolled it...
My BX2200 has been sitting idle in the garage since Sept, so decided on this last day of the year to fire it up and recharge things.
Ah, the sweet sound and smell of that little motor! Dang life...
I know this upgrade has been covered here many times and I have found Charliebrn's great step by step on how to acomplish this but I have run into an issue with the pivot bolt. Charlebrn talked...
Does anyone have some good pics of the bx front blower in action? I'd reaaly like to see some. We'll .....seeing as how were getting belted with snow and all....and I PAID for my blower in JULY...
We got about 16 - 18'' after all was said and done. Yesterday morning I was using the BX and FEL to move snow. When you first enter the driveway the left hand side drops off suddenly. I push a...
I've read other posts about gearbox oil dripping out of the "GEARBOX VENT" when storing some 60'MMM's in the vertical position. I've looked but couldn't see the vent...maybe it's these 56yr old...
I just wanted to pass this on to those of you who are going to re-install your front loader. make sure that you carefully reattatch your hydraulic hoses so that they do not rub or bind against...
BX2200 and woods 72\" backblade?
I have the option to obtain a woods 72" backblade at no cost (used of course). I don't have the exact model number but was wondering if anyone has one of these...
Today when I hooked up my FEL it will not tilt back up. It tilts down, moves up and down but will not tilt back up. First tractor so I'm not sure what to look at first or try??
It was used 2...
Has anyone but me broken the flashing amber lights on their BX2200?
I am going to move mine up on the rops after this weekend.
TSC has a replacement unit, but it has the wrong bulb, it is a 2057...
Just picked up a 3 point 5 foot blade. Problem is I can't turn the blade around with out removing because it hits the lift arms. BX lift arms come from such a low pivot point that with any...
BX2200 won\'t be used all winter - precautions?
What to do to avoid problems come spring. Tractor is only used to mow. Not sure what to do about fuel. Fill or drain?
I've been trying to locate info on a snowblade attatchment that will "Bolt on" a BX2200 loader....does anyone know of a company that sells them or if they even exist???
After seeing the fold down ROPS on the BX22, I wonder if it would be possible to alter the ROPS on the BX2200 so that it would fold down as well?
Anyone had any experience with this?
I have...
Hello all,
I bought a BX2200 (w/ 54" MMM & FEL) this summer. Great tractor. I have a pretty basic question. As part of the purchase, the dealer threw in a block heater, but I have to install...
Hello everyone,I have not posted in a while, been very busy.I am now coming up on 300 hours with my 3 year old BX2200 and have been extremly satisfied with its performance.My question is i have a...
I made the attached one page check list taken from various parts of the Owners Manual. I've encased it in plastic and have it hanging next to the tractor in the barn. To be used by each of the...
Checked the pressure in the turf tires as delivered by dealer. Both front and back were about 5 lbs above the recommendations in the manual. Dealer told me that's the way they came from Kubota...
I have a general question regarding the amount of hydro slippage that is acceptable. Last week I was trying to push over an old clothes line post. I had the fel bucket about 3 feet up on the...
1) Where would you recommend setting the throttle for the five minute warm-up period? (I've been warming slightly above idle.)
2)When mowing with the 60 inch MMM? (during the 50hr. break-in...
Is there anyway to modify the type of valve that controls the three point to be sensitive to the speed/position which with you move the lever like on full size tractors? I realize you can adjust...
I would like to dethatch my lawn while mowing. I am wondering about a dethatcher that could be mounted to the front of the Bota and mow at the same time??
While moving some dirt with the FEL yesterday I found myself being sprayed with hydraulic fluid coming up from the left floor board around the emergency brake and differential lock pedal.
Turned...
Howdy.
First, just to bring everyone up to date, my BX2200 now has almost 150 hours on the clock and has cut grass, hauled/loaded tree trunk sections & leveled dirt since I bought it without a...
I\'m comparing the BX2200 and the B7500.....
I have a B7500 and I've noticed that ALOT of the users here have the BX2200 and I was wondering what is the big difference between the two?? What made...
Hey guys, I can not find my manual, how much crank case oil does a BX2200 use with a new filter installed?
Also, I am thinking about using Mobil1 5W30, any problems using synthetic oil???
I was at Davis equipment in Ashland Ky. yesterday and teh salesman there told me that in Dec. there would be a backhoe designed just for the BX2200. Said it would be available in dec. think he...
Hi Folks,
After bushhogging and parking my BX, I noticed the dirt on the back of the machine was wet......seems to be coming from a red, breather type cap (small and loosely turns) under the seat...
Well I've had the BX2200 for a couple weeks and have been using the FEL for everything and anything. I'd carry the groceries in from the wife's car if she'd let me!
Seriously though I've been...
Originally I was going to ask a "which one should I buy" question,... but I think I'm leaning Land Pride. The question I have now is, will it work.
I had narrowed it to these three as they are...
If I wanted to get replacement headlamp bulbs for my BX2200, what would you folks recommend. I would like to get the brightest bulbs possible, yet the safest for the machine as well. Thanks!
Adam
Folks,
I have been considering a small winch to put on the front of my BX2200. Specifically I want to use it to help pull logs out of the woods. Currently I use a large chain to drag out firewood...
Does Anyone know if Kubota has finally offered the kit for rear remote hydraulics for the BX2200?
The last I got from a dealer early this summer was that it would soon be available, Just...
I went to install the block heater that I purchased last spring and a problem has surfaced. I had no problem getting the 17mm plug out of the block; installed the heater but it leaks around the...
Leveling BX2200 60\" MMM
I have spent considerable time crawling around the mower measuring the right vs. left blade height both parallel to the line of travel and to the axle and at various...
Ok all you other BX owners. Here is a question and I am sure you will just shake your head and laugh but, here it goes. Keep in mine I am Polish if that helps.
I have a BX22 and want some...
Hello All,
Tomorrow - I think - I am buying from a local dealer, a used Kubota BX2200 for $12,500. It was used 35 hours. It has a midmount mower and a front end loader. The setup is in great...
my tractor started normaly, then after running about a minute started chugging an a white thick exhaust was comming from the exhaust pipe. I turned the tractor off, now it will not start (cranks...
My local Kubota dealer has a used 2003 Bx2200 with a 60"mmm for sale. It has 50 hours on it. He is asking $9500.00 for it. Is this a reasonable price? The previous owner traded the BX2200 in...
does anyone have a BX that is not level? My BX2200 leans 3/4 to an inch to one side.Is there a way to level the tractor,other than tire pressure.I'd sure would like to know if this a problem thats...
Oil capacity with filter for BX2200 is listed as 2.6 quarts. I noticed a post that the BX actually holds 4 quarts and that is what he puts in his. Can anybody clarify??? Thanks
I am generally satisfied with new BX2200 but find the HST pedal to be very poorly designed. I am tall and it is so far off the deck that my knee is at an uncomfortable angle. Looks like you...
I wasn't positive where to go with this one, but I think oils fuels and lubes is NOT the right forum. Not enough Kubota owners... This is a parts question more than a lube question, so I hope...
I'm thinking about the BX2200. However, the turning radius is listed as 7.5 feet. Does that mean if you are mowing you leave a 15 foot diamter circle uncut?
Riding lawn mowers typically have...
I was out doing an oil change and noticed the dealer gave a different filter this time. The filter 70000-74034 is much larger than the one I took off and the rubber gasket is about 1/8 - 1/4...
Hey Fellow BXers:
Does anyone have any helpful hints in changing the fuel filter on the BX ? I barely have enough room to get my crab-scratchers to the fuel filter, much less remove it. I do have...
Puma 54\" Snow Thrower and BX2200
Hello,
I've read that a few people here have the Puma 54" 3pt snow thrower for their BX tractors. My questions are does it fit properly 'right out of the box'...
Simple as this... I hate to rake all of the leaves. I have tried mowing them, but the walnut leaves are so sticky, that they kind of hand around a lot.
I was definite that this year I would get...
I have a Bx2200 and was wondering if anyone has any reccomendations as to what kind of bagger I should get for it. I am thinking that the Kubota one might do, but I am worried about having to...
Hi,
I think I recall reading something in the past about a bx2200 fuel gage problem...but even with the restored "search all forums" capability I just can't find the thread!
Have any of you...
Just found this site couple months ago while researching compact tractors. Bought the last new BX2200 I could find in my area. Driver delivered it Monday, said he was a "sub" for the regular guy...
I bent ( Don't really know how) the top link on my BX2200 the other day while running the aerator. I had the side that goes to the aerator out a bit but not to the end of the threads. Bent the...
After pricing the Kubota work light for the BX2200, I decided I could do better on my own. I thought I would share my approach, since it is a little different than the approach taken by others on...
One thing the BX2200 is missing is a toolbox. I wanted to share with you my solution to this problem. Here is all you need:
Sears Craftsman Compact Truck Box #965117
Two heavy duty plastic ties...
BX2200 \"Proper\" Fuel Filtration
Well. The BX2200 and I have had some time to get used to each other in the past month:
- Cut down/cut up four dead trees; rented a 20 cu yd dumpster & loaded...
Hello,
I am thinking ahead since summer is flying by. I have a 5 foot rear blade that I'm going to use to plow snow. I have a 450 ft. driveway that has a grade upward towards the house. Do you...
Hello,
Thanks to everyone who has helped me out so far. Like I said before, I am new to tractor ownership. My BX2200 now has 15 hours. What all should I do before each time I use the tractor? I...
I got my tractor back from the dealer today,
Sure is nice to have good steering again, They replaced the entire cylinder The dealer said I was the first with the BX steering problem in this...
Per prior post asking for opinions. Newbie with new home on 6 acres of well manicured grass. Want more capability than ZTR. Looking at K bx2200 with 60' MMM. Has a gravel road to be...
Looking at new BX2200 in northern AL -- quoted dealer price ~$10800 with 60' MMM. Have seen as low as ~$9500 in forum/other parts of country. I am newbie - should I try to get this for less than...
BX2200/60\"MMM
I have had this mower for over a year now. I love this BOTA!
After I am finished mowing however, it looks as if I have some white spots in the bermuda. I have taken the rig back...
I was out the other night working. I turned on the headlights early on and they worked fine. Turned them off because it was still light enough out they didn't make any difference. But when it DID...
I picked up my BX2200 on Saturday and already have 13 hours on it. I'm impressed with it. The compact frame size is deceiving of the power available. It's a well thought out piece of equipment...
Hi,
Just curious. My guess it that it is normal for the BX2200 to vibrate hard enough to rattle the hood and MMM when you turn the engine off at near idle, right?
My B2910 shuts down real smooth...
Well...imagination became reality today!
BX2200 is now in the stable...
Here are some pictures of them together...
First one is a solo though. Including a measuring stick. Japanese student in...
I have developed a steering problem with my BX2200 at 270 hours
I had not heard of any posts about this problem on TBN (Yet)
It will work all the time steering to the right, but when driving in a...
Two weeks ago, I bought a new BX2200 with 60" deck and FEL (paid $12,200). I love the tractor, but there is one thing that seems to be a problem, and I was wondering if anyone else has had the...
I just reattatched my mower deck today after doing some front loader work. When I took the deck off I switcked to Bar tires for better traction. Now I notice that after reattatching the deck with...
This is sort of a continuation of the safety seat thread...........
One of the things I realized early on was when you get off your BX, you should set the brake, go to N and turn off the PTO...
I am interested in a quality ROPS mounted sunshade with diamondplate having a low clearance.....any suggestions???..if you have one how do you like it and what company?????? Thanks
I'm interested in installing a quality sunshade with a low clearance to the ROPS on my BX2200.,preferably made out of diamondplate for durability. Has anyone installed one on your BX and how do...
Anyone bought one of the factory remote hydraulic kits yet for the BX2200? I asked my dealer about it and he didn't even stutter when he said $400!
Does the factory unit make use of the extra...
I purchased a demo BX1800 two weeks ago with about 55 hours on it. The dealer did no service to it so I asked them for the fluids/filters. They have not found the owners manual and have ordered...
Hello,
How does the BX2200 with 60in deck do in wet grass? I know the sales brochure sales it cuts it with no problem, but what about discharging? Does everything stick to the underside and...
Hello,
I posted earlier about my new tractor leaking some sort of fluid. The dealer came and picked up the tractor tonight. He checked the hydraulic fluid level and said it was fine. In addition...
What size box blade are you guys pulling with your BX2200's?
Four feet is the size recommended in the manual, but they are rare in this area and PRICEY.
I can get a five foot for $100 LESS than...
What size box blade are you guys pulling with your BX2200's?
Four feet is the size recommended in the manual, but they are rare in this area and PRICEY.
I can get a five foot for $100 LESS...
Ooops, I accidentally posted this in the general question area. I meant to post it here. Question, I know there are several posts on PHD's for the BX2200's but I just need to know who has the most...
I know there are several posts on PSD's for the BX2200's but I just need to know who has the most inexpensive one that will fit. Also curous if anyone sells a 6" auger that will fit? I need to...
This was the only frustration on my new BX so far.
We unhooked the PHD and tried to install the rototiller yesterday. After fighting and fighting to get our hands/arms in close enough to try to...
My tractor was delivered today. NICE. Fit and finish good. Delivery guy covered everything.
I dug a post hole just to try it out. Now will read all the manuals.
Might even pop a cold one...
Hello,
I just bought a new BX2200, 60 MMM, 48 Woods Box, & FEL. I have 13 hours on this unit. I have found that it is very difficult to switch between the various PTO's after engaging the PTO...
I am getting a very annoying vibration noise. Have traced it to the mower height adjustment knob in front of the seat. The shaft is rattling against the frame. The knob will pull off, however the...
Just wanted your opinion about the necessity of cleaning the underside of the mower deck after cutting ,especially with all of the moisture lately...I don't. Will this lead to premature rusting of...
hi everyone. i have 22 hours on my new bx2200. i am looking forward to the toys. i have researched this forum and decided on the herd 96. i called the company and they would not recommend it. they...
Greetings. Thanks to all the advice here, I felt confident ordering a BX2200, FEL, MMM, Post hole digger, and 50"bush hog rototiller!
I popped $250 for the mulch kit; not sure how well that will...
The BX2200 on the lot had a NON-Folding ROPS (as I now learn all do). Will the BX22 folding one fit it?
I can't get the unit in my shed without folding the ROPS.
I have the skills to take a...
I've read here that some implements don't fit on a BX2200 due to short 3PT arms and that some of you have
changed to older model arms that were longer.
If I'm buying a new 2200, should I try to...
Looked at a new BX2200 last night. I forgot to look; does this unit have ports for mounting external hydraulic cylinders? Obviously there is something for the FEL, but didn't know if there are...
\"Review\": Water Cooler for BX2200 Operator
If you're looking for a handy one-person water cooler for your BX2200, try the 1 gallon "Victory" cooler from Rubbermaid. I was wandering through a...
New to the board. Great information!
I looked at 2 YR old BX2200 with FEL, 54" MMM, and small Kubota Tiller with 160 HRs on it. Seller is asking $12,500.
From what I can guess, that is...
Hello again,
I spoke with my local dealer on Monday who advised he had 2 BX2200's left and 1 60" MMM. I thought I better act soon for the 0% apr and the fact that he advised he is finding it...
Yep, I know it's early and I didn't get a plow when I got the
tractor, figured I could get it later. Now that I'm thinking of
it what would I need to get. I have a FEL for the big snows
but most...
Someone at work is selling and I was was wondering if the BX2200
could handle it. I've got about 4 acres I could use it on as well as some path clearing. It's 5 foot cat 1 w/ 540 RPM PTO...
BX2200 and bushhogging ?\'s about undercarriage?
I read somewhere in this forum that fellow owners are having problems damaging the filters on the BX2200 while bushhog work is being done. Seems...
what will be the scheduled maintence hours intervals on a new bx2200? i would want a 60" mmm and a 60" rear blade to mow 3 acres of flat ground and clear snow from a 20'x80' driveway. Thankyou.
I am needing to replace my newly restored JD318 - which I really like, but it is too small for my property, and I definitely need the 4wd for the hilly parts of the property. How does the 2210...
How much would the yearly maintenance cost be for a bx2200 with a 60"mmm and a 60"rear blade? I'm referring to the 50-100 hour maintenance schedules. Thankyou
I am purchasing a BX2200 Tuesday. I have 10 acres of property in central Illinois, 2 of that is cleared ground that we will break in July for a home, and 8 woods with a 20 foot creek bed halfway...
My local dealer has a 2001 BX2200 with 135 hours and an FEL for $9500. How does that sound? I haven't been in the market long enough to have a feel for the used market. For a new model, I was...
This one is for all you BX2200 mechanics out there.
I tried to add a strobe to my BX today - I have to mow along a roadside at one edge of my property and am tired of drivers not seeing me. This...
I think it's great!!! I'm very impressed with the way it mows, and my garden and trees have never looked so good after rototilling. I can drop this thing in the praire and till (albeit we've had a...
I've been clearing some woods to expand my backyard (will post other photos in "projects" soon) and have been amazed at what this BX can do.
First I clear away all the brush, then fall the tree...
I placed this post here because it is intended, more specifically, for other BX22/2200 owners.
There has been many posts regarding PHD usage on the "smallish" BX's. I really needed a PHD and...
Had a great time Thursday. With all the rain we've had this spring, the back part of my yard didn't get mowed before. The fescue grass was taller than the tractor and seeded out. The MMM was...
Just goy my BX2200 w/FEL. The next morning after I cut my lawn, I noticed a pool of oil on the floor under the HST by the left rear tire. Looks like it is leaking from a hydraulic fitting. The...
Is your PTO select lever hard to shift? Mine is very difficult to move between settings. I have to keep engaging the PTO while moving the Select lever or it wont shift at all. When I do that I...
Just went out and found I've got a flat R. front tire. No obvious damage. Can I get a tube in it without taking it off the tractor??
Anybody fix a BX flat yet?
Thanks,
- Patrick
Can anyone give me info on operating MMM with 3PT attachment. Is there a way to lock the 3PT at top position while mowing so that you do not have to remove 3pt implements while using mmm.
Does anyone have a source for a top link for a BX2200? It should be about 13 inches when closed. Kubota dealer wants $100 for a new one. I bent one side when it hit the wood deck backing into the...
To all,
At times I consider upgrading my older gear drive B7100 to a BX22 or BX2200, with finish mowing being the primary task. I have a B2150 HSD with FEL for larger tasks. A Kubota brand...
I went out last weekend and dug up my neighbor’s water line with my Caddigger 608. That thing works nice on a BX2200. The run was about 40 feet and we dug down 5 feet with no problems. It was a...
I noticed that my tractor was sitting weird and measured the front corners of the frame. There is almost an inch difference between the two!! With the fel on and the bucket resting on its edge...
I have narrowed it down to these. They are the "same" price around here and just can't make up my mind. I am getting it with a FEL and MMM. The JD dealer is pushing the 4010 but I like the size of...
Ok, I'm new to the 2200 and was wondering if it is possible
to lower the mowing deck w/out lowering the rear hitch.
I was working with a box blade over the weekend and saw
an area that I wanted...
For months I have been looking for a stabilizer for the cross drawbar on my BX2200. I found one that locked the drawbar to the lower 3PH arm but when I got it home it did not fit. I finally...
With just over 100 hrs now I'm putting the kubota to the test. My son is building a house and I decided that we could dig the basement ourselves, useing a caddigger and the kubota with fel. I...
Anyone own a GC2300.. I am looking at buying one or the BX 2200 tractor but havent heard much about the GC2300. I like the lower rpm the MF runs at to obtain its horse power but will it hold up in...
I don't know if anybody has had this problem before but it confused the heck out of me for about 45 minutes till I figured it out. There is a plastic molded 30 amp fuse located just above the oil...
What procedure did you use to get your 60 inch MMM on your BX2200 to match the set up in the manual? I am not sure what to measure first and what to move so I do not move one setting and throw...
BX2200 doesn\'t like the Worksaver 24\" dirt scoop
Spent hours looking for a 24 inch dirt scoop, finally found one after a 40 mile drive thru PA Dutch country - sure is beatiful this time of...
Here are a few questions I have regarding the BX2200. I plan to pick-up a BX2200 w/60" mower and a FEL this weekend (quoted $12,200).
1) I plan to use the FEL very litttle, but I do have a need...
BX2200 HST pedal sticking (it\'s not the pivot)
The HST pedal is sticking on my BX2200. It's not sticking at the pivot, which is well greased and easily moved. It's much more noticeable on low...
One thing I found lacking on the BX2200 is an area to store gloves and tools. The tractor is so compact that that there are few places to mount a toolbox without interfering with something. Here...
Question ? I've read about tooth bars some here and want to know what they help you do??? I'm digging a basment and need to move alot of dirt sand gravel that I have piled up with a back hoe. I...
Hi Folks,
I've got another really dumb question! What is that knob below the seat on the BX2200 for? It looks like it might be for hydraulic adjustment to the rear, but I'm not sure. It has a...
I am interested in purchasing a bx2200 or BX22. Kubota uses the D905-E-BX engine. On the specifications it shows that to achieve 540 PTO RPM it is running at 3068 RPM. That seems to me pretty...
Hi Folks,
I read my FEL manual and have some questions that hopefully some of you experienced users will be able to help me with.......
I plan on reconnecting my FEL this weekend and wondered...
I HAVE A BX2200 THAT RAN GREAT UP TO HAVING 25 HOURS ON THE MACHINE. AROUND THIS TIME THE BX2200 WOULD LOSE POWER AFTER ABOUT 45 MINUTES TO 1 HOUR OF OPERATION. I TOOK THE BX BACK TO THE SHOP. THE...
My LA211 seems to lack lift and curl power when loading the bucket from a pile. Does anyone know what pressure the relief valve is set at and where it is located at on the four way valve. ???
Hi folks,
I took a couple of days off to get some work done with the bx, and felt that a review of the machine's capabilities here would be helpful for those looking to buy a bx. I ran an old...
Anbody know what the BX2200 length is without the 3-point hitch? I am trying to compare the size of both of these tractors, but the BX1500 pamphlet lists the length without the 3-point and the...
I am interested in knowing if I will damage my tractor if I put a chain around one or both of my lower 3 pt lifting arms and attach it to the eyelets that are provided above the pto? I want to...
I've got a 1 year old BX2200 with 100+ hours on it. Yesterday while doing some yard cleanup, I noticed a steering problem:
While turning the steering wheel "gently", the tires would not move...
Well, I'm a bit surprised but I could not find any reference to jacking up the tractor in the manual. Looking underneath, I'm afraid that wherever I put it ma cause damage to the hydro or worse...
Hi everyone,
This is my first post but I've been reading this forum for over a year, thanks for all the useful information.
I started out wanting a BX a year ago and then along came the 2210, my...
I have a question regarding the FEL on a BX2200. I have had mine for 115 hours. Mostly loader work on the new yard, no grass to cut yet.
The question is since I've owned it it has acted strange...
I am updating this question because of what I found today when I removed my deck to power wash it. I took the universal off the deck and this is what I observed. The end of the shaft that hooks...
Hi everyone. Has anyone used a Drawbar with their BX2200? How do I lower my three point hitch to the height that I need for my trailer, but not lower the MMM mount hardware?
thank you
I just wanted to post a thank you to all the forum members. I haven't posted much but I've been lurking for over a year now during my decision making. I finally made the decision to buy a BX2200...
I'm taking some advise from my last post about the 60 mmm noise problem I'm having. If there are any BX2200 owners around my area that read this thread please contact me if you own the 60" mmm...
On my BX2200, I have recently noticed that while using my FEL to dig dirt (patio project my better half has me working on), the rear blade attached to my 3 pt hitch will gradually lower over time...
I started my BX2200 up for the first time this season last Sunday. It ran perfectly for about forty minutes then the mower started shaking like something was out of balance. When I went to...
I recently found this forum and it is awesome ! I have learned a lot from the other posts...and hopefully can benefit from your suggestions. I decided to go with a kubota (this will be my first...
I have been trying to find out if there is a backhoe attachment for the BX2200. My dealers says there is one, but can't show me anything about it. I do not want to buy one right now, but the...
Does anyone have a Midwest RB22 rear blade on a BX2200? I think I would like to have the tilt and especially the offset feature, but I wonder if the BX has enough range of motion for the 3 ph to...
Hello, group.
Have found a deal for a BX2200 w/ 4WD & hydro transmission that is approx. six months old, 120 hours on the clock, ag tires, comes with the FEL and third-party box blade. Seller...
The BX2200 with 54 in MMM and Woods Estate Series landscape rake was delivered yesterday, and between the raindrops, I logged more than an hour on the meter.
Questions and comments-
1-No SMV sign...
Well we’ve had quite a winter in the northeast so I assume you guys around here (and other places too, I’m sure!) have had lots of practice refining you snow removal skills. I have a BX2200 on...
Anyone have info on making their own grille guard for a Bx2200? I am looking into doing this since I don't like the way the factory unit covers the front it's a wide open design. I'm open to all...
Has anyone made a grille guard for thier BX2200. It seems to me that the factory unit is nice looking but, I'm not sure how practical it is for stopping brush and twigs form entering the hood...
a friend was up and he wanted to try it. this is the first time I have seen it work from anywhere but the seat. makes all the other snow blowers I've had look sick
W O W!
Yep, I can't believe I'm contemplating this either, but my need for the loader is quite diminished now and going from a 60" deck to a 54" is a negligible difference (for me).
I found a guy...
Finished plowing the drive this AM and noticed a real beautiful green/blue hue on the snow. Seems that the hoses from the engine to the heater were routed a bit too close to the cooling fan for...
Today while snowblowing the grill that covers the battery Iced up, and caused the temp to rise up to the red line. Glad I was watching the gauges. I don't have a cab so snow blows everywhere when...
Anyone have any experience with the mulching kit available for the BX2200? Is it worth the extra cash? Does it work well? What did you pay? Did you install it yourself?
Thanks, Jim
BX2200...
Can anyone tell me the length of the BX2200 with the front end loader and box blade attached. I'm getting close to putting up a new building and am trying to see what kind of room I will have...
I can get a 5' KK back blade with tilt for $230. I know KK may not be the prettiest but they seem heavy duty enough for the BX. I don't see how it would not handle anything the tractor could.
Can...
RET I noticed that you have a BX2200 and also had to cut down your PTO for you tiller. I also have a BX2200 and a 44” First Choice tiller. I was wanting to know how much or short the PTO...
As I'm sure you all know, the headlights on the BX are useless with a fel. I'm not sure what they were thinking when they designed the headlights on this tractor but I saw an opportunity to...
Just installed a TinyTac. After running for about 50 minutes the idle RPM is showing 1260 is that normal. If not how do you adjust the RPMs on a BX2200
bx2200 top \'n tilt
Hi folks,
I posted over in the attachment forum regarding a Woods gb as against gbc box blade. RaT came back and mentioned top'n tilt. IF I could convince the wife I needed...
Ordered the 2200 with the 54 inch mower - 10.2K$
Want to order a landscape rake - any comments on the Woods Estate series - quote was $585 with guage wheels - I guess the price isn't bad - but is...
bx2200 60\" mmm adjustment
My 60" mmm is way out of adjustment. Left side is lower than right. The manual is so dificult to decipher. First of all it seems that all the measurements in mm are...
Hi everyone,
Wife wants a chipper for the new bx2200. A post on another thread mentions that the bx doesn't run a chipper well. Any opinions, insights, info from anyone??
Thanks in advance,
DaveL
I've been reading these posts for a few months now and just wanted to give my opinion on by new Bx2200. THANK GOD that I sold my Green LX277 Deere and bought my 'Bota last Oct. before all of the...
I was wondering if anybody ever used a brillion seeder with their BX2200. It is listed at 788lbs. Any thoughts, I have 2.5 acres to plant grass and the local co-op rents this particular seeded...
Does anyone have a detailed diagram of the quick hitch shoe? I have a hydro blade that I'd like to convert to the quick hitch connector for use on my bx2200. Any info would be appreciated.
thanks!
Well it arrived last night around 9pm. Well it has some bent stuff and anything that was broken the guy had parts for us to replace them with. This tractor was used by employees so they really...
This is the first deisel I have ever owned so I am shooting in the dark here. Is it normal for the tractor to start and run for a few seconds and then stall 3 or 4 times before it finally catches...
Some folks have asked me for more info and pictures of my Curtis cab on my new BX2200 so I thought maybe a new topic would be in order.
This cab is the softsided model with the two speed...
Someone on another thread was asking for a list of BX attachments that do Not fit on a BX. I thought we should put together a list of attachments we know fit on the Kubota BX2200. Here is what I...
Well, I picked up my new BX2200 today!
Here's a picture my wife took of me moving some snow around that desperately need to be moved... Notice the SEG on my face.
I think I'm gonna enjoy this!
Ok I like the looks of the 2200 but have read things on here about the low ground clearance and trouble with hooking up attachments on the 3 point hitch. I like it alot more because it's cheaper...
I was wondering if anyone has any suggestions or concerns about this idea (brain storm)? I took off the smv sign on my bx and was going to mount a metal box using the existing holes for the...
Yup, After owning this tractor since 2001, I managed to tip it. I was cleaning up some snow with the FEL. I had no blower on the back...just the rear counter-weight (but it was up too high). I...
I am looking to purchase an aerator for my BX2200. I have looked at some but don't know what the owners of BX's are recommending. How about some feedback on this question. I'm concerned about...
Folks,
This is my first post in own/operate as I just got my BX2200 yesterday. I have the FEL and may need additional back weight. Others have suggested the 3 pt hitch box or scraper blade but I...
Folks,
With a lot of help from TBN I purchased a BX2200 with a FEL and 54" MMM. I posted my research, testing and prices on the PowerTrac forum. You shoul stop in there. They are a great bunch...
I am thinking about getting rid of my ATV and purchasing a Kubota BX2200. I am young and just got some land and I think this would be a smart move to help me do work around the land. Please let...
Ok now that Kubota will finance my loader I have just one more question. The dealer I'm talking with gave me a price of $2400 installed. I have been reading some of the posts and have seen...
Hi folks!
I already appreciate all the info I picked up on the boards and don't even have my 2200 yet. I agonized between the bx and a 7500 and went 2200 due to the lower center of gravity(I...
Has anyone else had a problem with the hood popping open while on uneven terain? I believe it is especially problematic with a heavy load in the fel. Is it possible I have a frame twisting issue?
Hello,
I wish to send a BIG THANK YOU to all the guys that have helped me with my questions about my tractor. Your answers have been invaluable. I have learned more in the few days since I...
Folks,
I posted recently about purchasing a PowerTrac vs. my fears of no support. It was a very active post with a lot of good input. MossRoad asked me to post back if I chose other than a PT.
I...
Just a note to those who self service your tractor. I was changing the oil filter on my Bx2200 and failed to notice that the old oil filter O ring was stuck on the side of the engine block...
I put a cab on my BX2200, the inexpensive kind, and when you blow snow the reverse rad. fan sucks the semi-warm air out of the cab-which means it is replaced by cold outside air.
I know that I am...
Kubota won\'t finance new loader for my BX2200.
I have just made a new purchase of a BX2200 ,60"bmm and a Landpride 1560 rear blade. Like most of the east coast we were hit hard by a snow storm...
I have a BX2200 with 11 hours and when using the loader I have a problem with one of the hoses at the control vavle disconnecting itself at the quick connect coupling. This is the hose that is...
Hi,
I'm new to this forum, found it this past weekend during the snow storm. I thought I would ask opinions of experienced tractor owners to help me in my decision. The decision comes down to...
Well, after clearing the 30 inches from my driveways and parking area, I am more than pleased with my purchase of the BX2200/FEL/MMM.
The tractor performed spectacularly with no problems...
Dealer is pushing 2003 BX2200, $8995 for tractor + $2850 for snow-blower attachment. Claims it $1000 off this month, special deal from Kubota.
Sound like a good deal?
Well I read on TBN that the BX air filter strap has been breaking so I checked mine, sure enough it's broken.
Right where it mounts to the engine.
Is this covered under warranty?
I'm hesitant to...
Just wanted to thank all of you for helping me make up my mind between a jd2210 and the bx2200...with all of your knowledge and positive feedback, you made my decision easy. The stork is bringing...
Does Anyone have the front hydraulic Blade with a Bx2200?
This one be with the hydraulic angle on it.
Any and all insight Anyone could give would be greatly appreciated.
2001 BX2200 with 60\"MMM, 50 Hrs,$9,500
If anyone is interested, there is an add for the above in this Sunday's Green Bay Press Gazzette. Other than that I do not know anything more about...
My neighbor is interested in Bx2200, fel, and a rear mount snowblower. He went to a local dealer (right around the corner) and received a quote of 12000 + 8 percent sales tax.
Do you think this is...
I'm seriously considering trading my BX2200 in on a shiny new BX22. My dealer has two of them sitting on the lot and gave me a price of 14,500. He wouldn't even give me a ballpark on trade-in...
I have a like new 66" Befco tiller that I used in my business and would like to keep it to use on the BX2200. I have called dealers and asked this question " Is the Befco 66" to large for the...
How much weight have Some of You Fellas had on the 3ph of Your 2200's?
I haven't used that much on mine and wondered just how much had been used on one.
I'm considering mounting a snow plow from a Cub Cadet super garden tractor or one that fits a B1750 in the FEL bucket of my new BX2200. The cub is a 54" wide manual angle, and the Kubota is a 60"...
Hello gang, I now own a new BX2200 with about 4 hrs on the clock. All 4 hrs. were spent moving snow here in De where I live with a rear blade Landpride 1560. I owned a TC33D before this tractor...
Has anyone put AG tires on their BX200? I called my dealer and he said all that was listed was Bar tires, which I think (my limited knowledge) is not as durable. I got a great price on the bar...
Sold my JD445 to buy my BX2200 w/FEL. (Not disappointed at all) I kept the front blade from the JD to mount on the BX. Father-in-law suggested removing the bucket off the FEL and mounting the...
Well, I'm finally at rest. After buying the BX2200 with MMM and FEL in 2001 and not getting to use the FEL for clearing snow on my property last winter, I can now proudly say that "I got my monies...
Bought my BX2200 03/02/2002. It now has 102 hours on the meter. Yesterday, 12/26/02, I go to the shop and start my baby up. Starts just fine and purring along so I walk outside to let it warmup a...
My BX2200 has 73 hours and when you raise and low the 3point hitch or the FEL a hissing noise comes from under the seat. I am able to get the noise to stop by moving the 3 pt hitch up and down...
Has anyone attached a TSC Carry ALL to their BX2200. I would like to have a platform for the back that would allow me to haul things such as firewood and a 55 gallon drum of water.
A second use...
I purchased a BX2200 last week, it will be delivered later this week. While I’m waiting for delivery I have been reading the operator’s guide. Currently I have a Wheel Horse and it recommends...
First I have no ties to the company and will not profit from the sale. The Kubota Dealer in Dalton, Ga has a BX2200 with no attachments that has 98hrs on the clock. Quoted the price of $6385 for...
Became the owner of a BX2200 w/60 mower this weekend. It was a used unit with 98hrs on it. The big item that is next on the list is a loader. Dealer said that they had used Buhl (sp?) loaders on...
I came across this and thought I would share it with all the BX2200 owners.
It is a parts manual in .PDF format, you can also save it to your hard drive for faster access.
I think it is around...
I hope this does not stir up controversy like my "Welded some hooks on my FEL" post did. Which, by the way, are working just fine...
I made a trailer hitch from angle iron for my BX 2200. Here is...
when i lift my mower deck after mowing, and am motoring along , the front of the deck bangs something pretty hard. my dealer says its normal, but i gotta think eventually something is gonna...
I bought a new BX2200 this past summer and have used it all summer for mowing 7 acres (60 mmm). I currently have 60 hours of use. I recently purchased a single bottom plow for my garden and had...
Hey im new to compact tractors and I am looking at a used Bx2200 right now and I really like it. I was wondering if you can get a backhoe for it? Thanks
I know it has been on here several times, but I am not too good at searching for it.
I have a BX2200 and would love to have remote hydraulics with the two connectors and a separate controller on...
Looking at purchasing a trailer for hauling my BX2200 with MMM and FEL. Any susgestions on what size trailer. I plan on using an Olds Mini van to haul it. Looked at a 6.5 X 12 single axle with...
How many gallons of windshield washer fluid did your rear tires on your BX 2200 take? I have decided to fill the rears with the WS, need to know how many gallons to buy. I figured I would not...
Have new BX2200 and need implement advice. My plan is to work 3 acres for planting blackberries. This is Central Texas, with clayish soil, like "gumbo" but with good drainage. The implements I...
Has anyone heard of a factory recall on the fuel tank for New BX2200. Here is what happened to mine.
I purchased it in August, and I noticed a month ago that when I filled the fuel tank up and...
Well, I put the first pic in the attachment section thought I'd show some of the other stuff, and mention that I bought our toy at Michigan Skid Loader in Utica.mi. Just thought they deserved a...
I would like to put dual wheels on the rear of my BX2200. Does anyone know if they are available or should I start welding?
Want to pull a two bottom 12" plow and 6 1/2 foot disc. Also I think...
greetings one and all. deer season is here finally!!!!!!!!!11
next year i want to put some food plots out. i need advise on 2 things. first what 3 pt pto tiller do you guys use that isnt too...
I just purchased a BX 2200 after much agony. I toyed with the idea of a B7500. I just could not justify the extra cost for basically more ground clearance. I will mostly mow and am very impressed...
My MMM height knob on my BX2200 is squeaking against the body and it is very loud.
Has anyone else had this problem, how can I solve it, I am just stuffing a rag around the shaft for now.
Serviced the BX2200 and gave it a bath. Just used garden hose.
Now the caution lights will not go out.... Got something wet, assume a relay, but cannot locate it...
Very annoying...
I realize this may be getting old but I am attempting to finalize my tractor decision. I live in the NW on 4 acres with mostly grass and some woods. I intend to mow, cut trails, spread gravel...
I have read many posts on why NOT to put a backhoe on the BX2200 but I want one! I can't justify spending $7000.00+ to trade up to a BX22 for a backhoe. Especially when I am going to use it...
My BX2200, FEL, MMM was delivered about 4 weeks ago. Went out to mow yesterday and noticed the right side of the MMM was not lifting. Took a look and found that the head of the pin on the...
Last weekend I found a fuel leak on the left side of the fuel tank. I traced it to a white disk about 2-3" in diameter on the top side of the tank under the ROPS. Does anyone know what the disk is...
was cleaning my BX2200 and noticed that my Bracket that holds the Air Filter in place broke where it bolts to the engine. The bracket does not look like it was made that well as it is just a strap...
I have been pondering the purchase of a new BX2200.I am curious if present owners out there could advise me in a few areas.
1.Has anyone used the bucket to move snow ? How easy is the bucket...
Note this is a BX2200 and a backhoe, maybe some day I can get a BX WITH a backhoe.
I guess as long as I can pull two trailers at the same time, I can get the job done.
The backhoe is a Northern...
Anyone have any trouble with ground clearance on the BX2200?
I have read many great things about this tractor, but one of negative factors is low ground clearance of 6.7".
When does this become...
As i posted earlier under wrong heading.. PROBLEM?? can't use the rear 3 point hydrolics, box blade, without the 60'' mower also going up and down, the same time the rear blade does? Help...
I have a bx2200, recently bought used. Problem? How do you opperate the three point, on the rear without the mower activating at the same time. While trying to use box blade on rear, the 60'...
Got used bx2200 yesterday, love it. But this morning, wont start. After a while all of a sudden it starts. Have moved the lever that puts in nuetral many times, anyway. Turned off, and tried to...
Just got today . a usedbx2200. It has 60" belly mower and box blade. When you put down the mower , to mow, the box blade also lowers. Can you not opperate these independant, without taking one or...
I figured I would pass this on to others that may come across the same problem.
I went to start my BX the other day and did the normal procedure of putting the tractor in neutral and turning the...
I will soon be purchasing my first tractor. I believe I have narrowed it down to a Kubota (but i did find a great deal on a used NH TC33D so that is still in the running), but I have received...
Well after countless hours driving past the local dealer and reading posts on this site I finaly got my new tractor. My birthday is coming up in the next few weeks and my wife asked me what I...
A word to the wise: when changing the oil in the BX2200 go by the dipstick reading, not what it says in the owners manual.
I did the 100 hour oil change over the weekend (change just the oil not...
Attached is a picture of my first project with my BX2200. I cut in a 10' x 420' path for my new driveway. We are building a new house and I figured I would buy a tractor and do some of the work...
Having trouble leveling mower deck on BX2200. Ive followed the manuel but when deck is lowered the left side bottoms down before the right side. once all is bottomed out blades are level. The...
Anyone know if Woods has made a loader for the BX2200 yet. I talked with a dealer early summer and he said they (Woods) should have one soon. I have emailed Woods a couple of times with no response.
BX2200 WHEELS WON\'T SPIN
HAVE A BX2200 FEL,60MMM, WITH 70HRS. WHEN DOING LOADER WORK AT 3/4 THROTTLE THE TIRES DON'T SPIN WHEN PLOWING INTO A PILE OF DIRT( 2WD). THE TRACTOR GRUNTS LIKE IT IS...
I finally decided I needed a little more weight on the front end after using a brush hog I borrowed from a friend, and too many trees to have the FEL attached.
I had added a front bumper earlier...
Okay...I know you guys have made plenty of posts on this subject but I need some info. I'm helping a friend put up a pole barn and am going to rent a 3pt phd to get the holes dug. My question is...
King Kutter 5\' Box Blade and BX2200
Anyone know if a BX2200 can handle the King Kutter 5' Box Blade? The Kubota site shows a 4' in the implements list.
Howdy!
I finally did it and bought a used BX2200 with 186 hours on it. It came with a FEL and what a joy that is! No more back pain! I paid $8500.00 for the machine and loader. I am in the...
I have viewed alot of threads on B7500, etc rear work lights. I was wondering if anybody has done anything different in mounting rear lights on a BX2200? This is all new to me so I want to be...
Well, it finally got me. Since my BX2200 was a later model (picked it up last September), and had the grease fitting on the pedal, figured the tank was fixed as well (dealer said it was). Just...
I would like to thank you all for so many postings to help a first time NEW tractor buyer make decisions. After doing extensive research on my own then finding this site to solidify my thoughts I...
I have been using a TSC 3 pt carry all platform, and didn't think I needed any forks, even after reading all the good info on the TBN page.
Well I had to move a bunch of pallets and some limbs I...
I have come accross a B1700 with 259 hours on the clock. This machine comes with an Allied Loader model 80, with both a 60" and a 48" bucket. It also has a 3PH sprayer and a Farm King Box...
Have you ever worried about the plastic grill on your bota when you were empting the FEL into a dumpster or pickup?
I did, so I built a bumper out of 2 pieces of heavy wall 1 inch square tubing...
The nuts on the check chains aren't the easiest things to adust if your hands are wet, cold, greasy of if you have a load on them. I made a hand size adjuster by cutting off the big end of a quick...
I know that Kubota does not recommend a backhoe for the BX2200, and that is why they made the BX22. However, I own the BX2200 and would like a limited use backhoe. Has anyone ever used a backhoe...
I have managed to tear two rubber boots on the tie rod ends. probable due to old barbed wire (acording to my dealer).
I had to replace the entire assembly as the rubber boot is not carried as a...
Has anyone installed an analog tachometer on their bx2200. I saw posts about the tiny tach, but I like a needle and a gauge to monitor engine speed.
Ricky
I'm getting a pole barn built near a round pen / corral. I want to build it as close as possible to the round pen, but still leave room for the tractor (BX2200, with loader and/or rotary cutter...
What would be a fair price for a new Kubota FEL for the BX2200?? How about if I bought the FEL at the time of purchase with the BX2200. I have a price of $9950 for the BX2200 W/60" mmm.
I am in...
OK--I finally got my BX2200 with FEL, 60" MMM, Box Blade. Dealer delivered it to the house. I get home and decided to try it out and mow about 3 acres of grass,
1st Problem -- You cant use any...
Is the main difference between the B7500 and the BX2200 the hydraulic pump. It looks like the B7500 can pump more than the BX2200 so it can use larger implements. The B7500 also has a larger...
I got a price for $12,000 for a BX2200, FEL, 60"MMM, Generic Box Blade, and ag tires. Should I jump on this with the dealer or try to squeeze some more out of him. Does anyone know how much the...
I have a BX2200 and love it. I was wanting to know if anyone has tried puting a sickle mower on the BX. I have two creeks on my property and the bush hog can't get too alot of it. I need...
I just purchased a bx2200 w/ the 60"mmm and front blade. I am wondering how the 2200 will perform plowing snow vs the 7100hst. My neighbor had a 71 that i have used and it worked mint, never got...
I just purchased 10 acres in central Illinois. To give you some perspective, it is 330 ft of frontage and about the first two acres is cleared and then it goes about 8 acres back in nice hard...
Say - does anyone have a suggestion (it may already be in the manual, so be kind if this sounds dense) on how to use the MMM on my BX if I also have a ballast box on the 3PH. When the mower deck...
BX2200 60\" MMM Noise
Have any of you guys with the BX2200 MMM 's heard any grinding noises on the left side of the deck? I have a grinding noise on the left side of my 60" deck that happens very...
Has anyone used a Brush Hog on their BX2200? I am looking for compact tractor to use a FEL and a brush hog. I don't need a finishing mower, I have a field that is very overgrown and needs brush...
What is the correct model number for the oil filter for the BX2200 - the dealer gave me 70000-15241. Is this correct - the original filter is a tad longer and black and the new one is white. I...
Hey ALL, wanted to thank the folks at TractorByNet for this great resource to prepare for purchasing a tractor and to all those who have posted up your experiences with your tractors.
I just...
I have had this little bad boy for almost a month and already have 36 hours on it! We mow 5 acres and are building a new house. The things you can find to do with the FEL are endless.....The...
I just got a quote on the BX2200 with a FEL, grill guard, loaded turf tires and 60" MMM. The price includes a worklight and 50 Hr. maintenance kit. The total is $12,310 out the door delivered...
I have been racking my brain trying to decide what to buy. I have 3 acres that is pretty much all lawn (actually weeds acting as a lawn for now). I am going in Monday to get a tractor and have...
Does the BX2200 have enough power to run a 72" rear discharge mower?
I have about 8 slightly slooping acres to mow.
Could anyone hazard a guess at what speed (MPH) the BX2200 could run the...
My deck is pretty noisy, and it doesn't all sound like belt/blade noise. I'd swear there is a bad spindle bearing. It is especially noticeable when you disengage the PTO and it coasts down...
Ok, I'm new here. I have a new BX2200 with 72 hours. This weekend as I was tilling tree rows my speed control pedal started becoming sticky. Having read the posts on this common problem with...
I have fluid leak problem with my BX2200. The leak is somewhere in the steering assembly (where the four hydraulic lines connect to the steering wheel). I have already had it in the shop to...
Well all the parts for the rear hydraulics finally came in(took over a month) and I just finished installing them on my BX2200. The parts came to a total of about $160.00. These are the parts...
Trying to order a tiller for BX2200... how do I measure to tell them how long to cut the PTO shaft? Is this something I can do myself? (that is, how hard is it to do)?
Thanks,
Patrick W.
Well Boys, I could not stand to wait for delivery until Saturday afternoon, so I went and picked up my Kubota B7500 with a 60" MMM, and the LA272 FEL myself. After logging only 5 hours in the...
I probably got what I paid for; however, i'm hoping for some insight. I bought a lower end PH digger for about $420 and i'm having trouble getting it stuck. My bx2200 will suck that auger into the...
I have a BX2200 with about 60 hours on it. I have run into a problem with floor board rattle. It seems to rattle the most when I am off of the tractor without my foot weight bearing on the floor...
My dealer has a bx2200 with a landpride backhoe attached on his lot. He said that the bh has its own sub frame and it is not a problem for the 2200. Everything that I have read says not to use a...
Per my previous post "Got it Today" (posted yesterday) I developed a hose leak on the FEL which the dealer gladly came today and fixed. Well.........after about two hours of operating the BB...
hi guys, my new bx should be here next week. does anyone have dimensions for a home made ballast box, for rear weight?
i have some 3/16" diamond plate steel, about 2'x4'. i think it would work...
OK I am close to taking the plunge. I have gained great insight from everyone here. Thanks.
My use will be helping me get our new house that is just starting to be built, get done. Site...
While waiting for my dealer to receive and install the new steering cylinder, I tried to mow my front yard last evening. Well, the problem has gotten alot worse, I need approx. 3 turns on the...
I have been having a main fuel tank leaking problem on my less than 50 hour bx2200 ! The dealer has replaced it once , and now is going to pick it up again to check it out . It looks as if it is...
Can anyone giveme some input? I have narrowed my search down to the B7500 and the BX2200, but am a little unsure which way to go. I have about two flat acres to mow currently, but have...
I may be wearing you guys out with questions but I like others peoples opinions, especially when I am covering new ground. We are currently building a house here in SW ARK (GO HOGS GO), that is...
OK guys here goes........I have been checking-out this site for weeks. I have purchased 5 acres, am building a home (send money!) and realize I need something to help me maintain this property...
Well guys, we finally have a fix for the previously posted BX2200 steering response mystery that redneck and I complained about.
After no luck with my dealer trying to solve the steering problem...
I'm in France and just got a new BX after reading this forum and dreaming on the brochures from months !
The FEL manual mention things about a seat belt, and I can't find it on mine... Is that an...
How much can you lift? I sometimes can't get the loader off the ground or even curl the bucket after I drive into a low pile of dirt mixed with weeds. These are left over from piles of spring...
I am a newbie BX2200 owner and would appreciate advice from more seasoned owners about tillers for the BX. I have about 4 acres of alfalfa to mow and till under this summer in preparation for...
I have a question, when I have a load in my 211 FEL on my BX2200 and I am on uneven ground I always feel like the tractor is tipping to the right. So the other day I filled the FEL with dirt and...
Hello and what a great site this is! I'm a newbie to this site and also to my new BX2200! I've been test driving and talking tractors for a long time, but I finally got a chance to see a BX2200...
How effective is the BX2200 with turf tires pulling a box blade? I've got mostly lawn/pasture, so turf tires would be best overall. But there are some areas that need some serious grading. Will...
I am looking to buy a BX2200 for my place in south-central Montana.
Can anyone recommend a good dealer? The 2 I've talked to are in Bozeman and Billings.
How about price. Anyone bought a...
I had a small leak on the steering cylinder, dealer fixed it. Now i cant control the steering, if i make a turn the wheels straigten out. Called dealer back and he said it was probably air in the...
Changed the Hydro fluid and filter on my BX2200...manual says 2.7 gallons Super UDT to fill. I'm 1/2 quart shy of 3 gallons but no Super UDT on the dip stick. Whats the concenus out there from...
\"TOP\" Position on BX2200 MMM height selector
I have never been able to get the height selector on my BX2200 in the "TOP" position, which I understand keeps the mower in the full elevated...
Yesterday, I took the rotary cutter off and reinstalled the MMM. When I went to move the PTO selector back to the mid only position, I couldn't get the handle to move. I tried engaging and...
I have a new BX2200 (30 hours) and it looks like I have leak on the top of the transmission just under the seat. I checked the fluid level and it actually has too much. I noticed a small red cap...
Well, I finally took some time last weekend and installed the Kubota mulching kit on my BX2200 mower. It took about one and a half hours to install. The mulch kit consists of 3 steel sheilds...
When I'm hauling my trailer on the road or mowing, I usually run pretty high RPM, for good MPH cruising or good blade RPM, or so it sounded and I thought. However, yesterday I decided to see how...
whats the differance between the bx2200 and the bx 22? just a new model year? i have yet to see a bx 22 at the dealers. just the 2200. help im gettin close to buying
Anyone priced a BX2000 lately? I have a sneaking suspicion there was a small price increase in May. Anyway, I just priced a BX2200, 60” MMM, FEL, and filled rear tires for $12,000, before taxes...
hi guys, with the bx sitting close to the ground, can i use a phd
from tractor supply or other after market supplier. or should i
buy one from a kubota dealer? if from a dealer does anyone have a...
What are the blue book values of the following?
1998 L2500DT with turf tires, box blade and with 150 hours.
2000 BX2200 with turf tires, 60" mid mount mower and with 310 hours
Any help in...
I just bought my first tractor and decided to go with the BX2200 with 60" MMM, FEL and 48" FarmKing tiller. I have used all three components and love it!! I have a question about the MMM...
This is a 4" dia. sycamore tree that I have been wanting to get rid of for some time. I cut the tree down and left about 2' of stump. I pushed the stump at the 2' level w/ the fel from 3 sides...
Anybody have the Kubota tiller for the BX2200? What did it cost? How does it work, and how easy is RR?
Tired of fighting with the Troy Bilt...
Thanks,
- Patrick
The dealer's "road man" came out with the parts, and we did the 50HR on my '91 BX2200. Other than accidentally tearing the wire off the oil pressure switch duing removal of the filter with a huge...
Well - I have had the BX2200 for almost a month now and I just getting around to pulling the photos from the digital camera. (What can I say - I'd rather be driving the thing than sitting in...
Last weekend i finally had to mow. After spreading 18yrds of topsoil I had to pull the FEL and ballast box off. It took 15 mins to remove both and get ready for mowing. That includes the time to...
For you guys with B7500's, how do you like the quality of the cut of the mid mount mower? I have both a BX2200 and a new B7500, but let me tell you the quality of the cut with the BX2200 does not...
I've got a BX2200 with FEL. I've removed & replaced it numerous times without difficulty. However, the manual says to use the loader to lift the front tires as part of the removal process. I can...
Could someone help find the post on BX2200 tires. What to order. I am buying one this week off the lot and it has turfs. I am getting the FEL and 60". Need to put in a lawn on 3 acres flat...
I am trying to decide between a BX2200 and a B2410 both 4wd both with 60 in MMM (appears B7500 no big advantage over BX2200). I have 17.5 acres, 4 acres groomed lawn, 6 acres fields that I want to...
DOES ANYONE HAVE ANY EXPERIENCE WITH CARVER EQUIPMENT CO.? THERE PRICES SEEM ALLFULL GOOD.
THE OLD SAYING COMES TO MIND" YOU GET WHAT YOU PAY FOR". WY CAN THEY SELL SOMUCH CHEAPER THAN EVERYONE...
like any info on the bx 2200 with a tiller attached, i was told by a dealer that nothin work with the bx except the kubota brand tiller because of lift height ,i figure this is horse crap but...
The nonfoldable ROPS on my BX2200 is becoming a pain because of all the low lying branches on trees around my property. Would there be any warranty issues if I cut the ROPS in half, placed heavy...
Does anyone know the output of the stock alternator on a BX2200 ? I have searched but can not find anything on TBN. I want to add some lights, but do not know how many I can add before causing...
I am/was trying to get a big root dug out, and the associated dirt and leaves, which had grown up under a man size gate, on a fence in the rear of my property. I was using the right corner of the...
Wow! What a time saver. I moved some pretty big boulders today and the BX performed great. I was really impressed at the ease at which I could pick up and move uphill a large boulder, and then...
I live right next to a golf course. Part of the 3+ hours I do mowing, there is a chance that me or even worse, Bota, could get hit by a golfball. Does anyone know how much a repalcement hood on a...
BXers: I hear that a standard 4' rotary cutter is a bit much for the BX 2200 to handle weight wise. I am down to the final moments of purchasing a tractor and leaning towards the BX over the...
Tonite I took the FEL off just to see how long it would take me and how difficult (It took about 10 min.). I found that the dealer put 2 quick disconnects on the side of the tractor and one on...
After spending way too many hours reading all the posts here, I have finally ordered my very own BX2200 with the 60" mower and FEL (it came in today and will be delivered on Monday!). Now I have...
I realize maybe this subject has been beat to death but I am on the verge of buying a BX and definitely want to make the right decision. Looking at the unit plus 60"MMM and FEL. Priced at 12,800...
Hello All - I am new to this forum so please forgive me if this has been asked before.
I am getting ready to purchase a new BX2200 with a 60" deck and FEL. It will be used for work on my 27 acres...
Can\'t wait to get home: BX2200 waiting...
Hi everyone,
I wanted to thank the forum for all the excellent information that has been compiled here. I got an extremely excited call from my kids...
Saw another post on tractor RPMs and didn't want to butt into that post. Since the BX2200 doesn't have a tach, where to you fellow owners set the RPM's when running the MMM or the rear PTO. I've...
Hello All,
I just took delivery of a BX2200 last Wednesday with loader grill guard and 60"MMM. I didn't think much about ballast until I started to read the owners manual. I went back to the...
I've just ordered the LA-211 FEL from my local dealer (FYI - Countryside Equip. in Green Isle, MN - I've been really pleased with the service) -- YAY!
Now I have a few questions --
How useful...
I now have approx 15 hours seat time and have a question on the FEL control handle. The handle has a tendancy to stick when the FEL is being lowered - so much that I can let the handle go and it...
I bought a BX2200 this weekend. For those comparing prices, this is what I found on a BX2200, turf tires, FEL, 60" mmm: tractorsmart $12,250 FOB, Carver $12,315 delivered, local $12,200 delivered...
Well I made the jaunt out to the Kubota Dealer yesterday to take a look at the BX2200. I got to drive it around the parking lot and did some playing. The dealer had a used one on the lot that...
I have read many post saying it is impossible to put a full size post hole digger on a BX series tractor. I did not make any modifications to this unit. It mounted right up and I have drilled over...
Hi folks,
This is my first post at tractorbynet, and I'm very impressed with the amount of information here, as well as the community atmosphere.
I'm considering the purchase of a BX2200. I have...
I was considering a BX2200 when I discovered the Power Trac 422. Here is a comparison of the PT422 vs the BX2200:
Advantages of the PT422 vs the BX2200:
- On the PT422, all the attachments are...
The wife and I finally made the decision to move out of the city. We are in the process of purchasing a house on 10 acres. The 10 acres used to be a corn field. It is very flat with no trees...
Mowed by 2.5acres yesterday evening for the first time with the BX2200, 60"MMM -WOW, it sure cuts down the mowing time from my prior 42" riding lawnmover - 1hr20min for the whole thing compared to...
Hello. I love everything about my new BX2200 except the cheesy cheapo plastic steering wheel it came with. The B2910 has a nicely built wheel with the same diameter and dish. does anyone know if...
Hello. Can anyone tell me if a B2910 steering wheel will fit on the BX2200 to replace the cheap plastic one it comes with?
Also, can one of the moderators please explain why my earlier post on...
I’m considering buying a new BX2200. I’ve got about 10 acres of property some lawn, mostly wooded, with a 400’ gravel driveway. Looking to do general landscaping, moving stones/logs, some...
Thanks to all that posted help about the tractor descission. I've decided on the BX2200 with FEL, 60"MMM and 4ft landpride box scrapper. Test drove this setup this Saturday. Question is that...
I’m trying to decide on which tractor will work for me. Here are a few details on my needs:
- I only have 3.5 acres of mostly level field and lawn to mow. I have mowed the field a couple of...
Has anyone bought a BX2200 shop or service manual?
I'm looking for a manual that really does into detail on the tractor from a service aspect not a user's guide like the one supplied with the...
Does anybody have experience with a BX2200 using a front mounted snowblower and a rear 3pt blade for light snow cleanup? I am thinking of buyin the rear 3pt blade to handle light snows that are...
Well after reading all the great information here and looking at a ton of tractors I put down my hard earned $$ on a BX 2200, and its coming on Thursday…YAHOOOOO. OK now my question, does anyone...
I currently have a MF35 gas engine tractor with the following attachments: 6' Box Blade, 6' grader blade, 6' Disk, and a 5' finish mower. I need something to do some plowing, finish mowing and...
I am in the process of buying a bx220 with 60" mmm and loader. The price I have 12K even for the complete package. I think I did ok. Any thoughts? Thanks
I just purchased a new BX2200 with FEL. I am planning on picking it up tomorrow but it just occured to me that since I have added the FEL I may not be able to haul it on my 10' trailer. My...
Does anyone have any opinions or experience driving a BX2200 through shallow water? I will be replacing my old Ford NAA Jubilee shortly with a BX. However to get to one corner of my x-mas tree...
Next to the spools on the valve body there is a plug which I removed to see if that was where the relief valve adjuster was located. It was not so I screwed it back in but now the loader doesn't...
Question regarding Kubota BX2200 pricing. Just got a quote from Service Motors here in NE Wisconsin for a new BX2200 with a 54" belly mower, grill guard, block heater and FEL. The total cost is...
I understand that Kubota makes two different grille guards for the BX series. A front bumper/weight bracket and a plain grille guard.
I am wondering if anybody has either of these and if so a...
I have read about low clearance of the posthole digger when attached to a BX2200 (jokes about putting a BX2200 on a jackstand to use a posthole digger, etc). How real a problem is this? One excuse...
Sorry about my previous post re: BX2200 and posthole digger on the NH board (I think). But since some of you might have looked at it out of curiosity and own TC18/21. Was my concern a...
I have read about problems w/ low clearance of the posthole digger attachment to a BX2200 (jokes about putting the BX on jackstands in order to use a posthole digger, etc). How real a problem is...
I currently own a JD 445 which is a great tractor, but recently checked out a bx 2200. I was really impressed with the bx and the durable way in which it was constructed. I primarily mow with...
I will be buying a BX2200 shortly to use for mowing my lawn and doing some rough mowing (approx.20hrs/yr) with a brush hog around the trees on my xmas tree farm. I am debating between buying turf...
I'm ordering a BX2200 for spring delivery. I'm considering the PTO-run bagger, which is an adaptation of the excellent bagger I had on my TG1860. Some questions:
1. Kubota recommends the front...
I'm seriously looking at a BX2200 with FEL, MMM, and front snow blower. I have heard of some people having problems with their hood rattling. Also, it sounds like Kubota has a fix for the hydro...
Hi I am relatively new to this forum, I am considering purchasing a New bx2200 with front loader, 60" Mid mount mower, 60" woods rear scraper blade(3pt), 50" howard roto-tiller & an extra set of...
Just thought I'd share some pictures of my recent additions for the winter here in southern NH. Note that the pictures were taken outside so I wouldn't be harrased by the mess in my garage...
BX2200 60\" blade
I just had a chance for the first time to use the 60 inch blade
and with bar tires all around. This tractor and blade will move
any amount of snow. I live near Buffalo and we...
holiday greetings to all!
im talking my wife into a bx2200 heres the prices in indpls indiana i was quoted today any comments appreciated.
bx2200D with turf tires,60"belly mower,fel,and a woods...
Does anybody know exactly how much the LA211 can lift? I know the specs from the factory, but I was wondering if anyone has added a known weight until it can't lift anymore.
The reason I'm...
Hello. I just bought some land adjacent to my lot, and at 16 acres, I need to step up from my trusty TG1860. My local Kubota dealer is less than 3 miles away, and they are a swell bunch of joes. I...
Hi fellow BX 2200 owners. Where is the drain plug to fill or check the hydraulic fluid on this tractor. My neighbor and I own the same machine, and we can't figure this out. Please help...
I have a BX2200 with about 50 hours on it that I bought a few months ago. I went to do the 50-hour service and the manual mentioned a grease fitting on the hydro peddle. I looked and did not...
I need to know from all the bx'ers here what the turning radius is for this tractor. The lit. says 90". How do they get that spec? What about at the 60" or 54" deck? how does it do around trees...
I have a BX2200 and will have either the FEL or MMM mounted at anyone time. I need to mow over the top
of 3 year septic tank or field. Does anyone see a problem with driving over the top of the...
Got the following quote from a local, SW Idaho dealer today. This was my first quote and I'm wondering if it's competitive...or should I keep on lookin' ? Thanks for any input!
The quote: BX2200...
Looking for some input - Back in May I purchased a BX2200 w/ FEL, MMM 60" and the Front Mounted Hydraulic Blade w/ quick hitch. I am about to put on the blade for the anticipated nor'easters...
Am thinking of purchasing a BX2200 for my 4 acres of fairly steep cliff side garden. Have been doing it by hand for the last 4 years but think a compact would help with all the lugging, mowing...
I've recently sold my Ariens GT20 Garden Tractor with the intent of moving up the ladder to a "sub-compact", such as the BX1800 or BX2200. I would like to get a BX2200, FEL and 60" MMM. I have...
Just had the BX2200 returned with a new FEL on it. Aside from a hydraulic fluid leak at the valve (which it will have to go back for), I'm wondering how to use the 'level' indicator on the...
I'm in the process of buying a Kubota BX2200 with FEL, Front Mount Snow Blower and 5' scrapper blade. I'll probably purchase a mower deck for it in the spring next year. I'm getting the turf tires...
I bought a B1700 TLB with the intention of landscaping my yard and then selling it. Well I like having a tractor much too much to be without one ever again. I only have one acre and after a little...
I just wanted to thank everyone in reaffirming my decision that a BX2200 would be enough tractor for my 3.6 acre lot in Central Illinois. My BX2200 got delivered to my current house last week. I...
I'm having the FEL installed this weekend. I recall reading that I need to make sure I get the 4 way valve, instead of the 3 way. That way I'll be able to use the valve with the front blade or...
I'm clearing sections of my woods and thinning trees. I wanted to move the trees without cutting them up into sections to save time. I cut down several 30' to 35' cedar trees one with a trunk 10"...
Gheesh I wanted to add a front blade for snow plowing and mild dozing with the BX2200 and found out the blade is some $1200 or so and get this... You have to add $1000 worth of additional...
Is anyone using their BX2200 with a PTO generator yet? I am thinking of selling my Kubota ARX 6500 generator and buying a PTO generator for my BX. I purchased a new ARX 6500 and have not used it...
Just got back from the local dealer. Me and a buddy test drove the BX2200 and the B7500. I was hoping that it would help me make my choice an easier one but guess what...It didn't I can really...
For those of you who have experience with liquid ballast, I need to know how much fluid it takes to fill a 26x12.00-12 turf tire 75% full.
Thanks in advance for your help.
TomPh
Hello I have the option between buying a 4100 manual shift or or a BX2200 or a GT 455 . My tasks are as follows:
Grass Mowing 1/4 acre, slight hills, few turns - I want to mow it fast...
Just curious, what is the hour meter measuring? Is an hour an hour the engine is running, or an hour at a given RPM (like aircraft engines), like the old tachometer/cable driven hour meters. For...
I'm in the research phase of my first 'Real' tractor purchase. I've been reading many of the posts on TBN and they have been of great value. But I'd like to throw out a question to any and all...
I need information concerning the total amount of weight that comes with the weight kit for the front of the BX2200.
Also I am considering making a grille guard incorporating a device to hang...
I have recently purchased 3.6 acres in central Illinois. The majority of the lot is mowable, but it has a decent incline. To get a better idea of the lot, please see...
FYI - For those putting fences or trees in. I bought a 'Work saver' post hole digger. Category 0 for 'light duty' but it sure looks well built. The dealer put a Rhino (different company) 9" bit...
Have just purchased a new BX2200 but haven't taken delivery of anything yet except the owner's manual.
In the pre-purchase discussion with my dealer he told me that the mid PTO and the rear PTO...
I am buying a tractor. I have 3 uneven acres that I wish to clear/maintain. The dealer was saying I could use a BX2200. I personally think it is too small. I could go for the B7500 w/ FEL, and...
I purchased a BX2200 oil filter on line.
They put the BX1800 oil filter (15853-32439) p/n on the invoice and mailed me something else (15853-32430)
I went to two other WEb pages and found the...
Well I finally "bit the bullet" yesterday and purchased a BX2200 with FEL, 60" MMM and rear blade. Took me six months of soul searching and looking. Thanks to all who posted herein about the BX...
I almost signed the papers for a NH TC40D with loader, backhoe, and other options. It was my dream tractor, and the price was over $28,000. I started to fell uncomfortable about spending that...
Anybody have the BX2763 'heavy duty' front blade for the bx2200?
See it here:
http://www.kubota.com/bx1800impl.cfm
It says hydraulic lift and hydraulic angle standard, but then says "Manual...
Once again the versatility of the BX and it's loader proved itself. I had a half dozen 8 foot pine trees to plant. I shoveled most of the topsoil from the holes into a yardcart, but the clay from...
I'm thinking of buying the front blade (two way hydraulic) for the BX2200. My brother in law says I should get the FEL, and use it to 'plow', and it would be more useful for other things. Any...
Two weeks ago I purchased a BX2200 with 60" MMM for $10,300.. this was the cheapest of two local quotes, the other for $10,700... but both seemed high. Maybe it's the area (SE PA). Did I get a...
I've clearly struck the BX2200 info gold mine here... I have a 250 foot paved driveway which I was planning on snow blowing with my Honda snowblower. Alternatively, I might sell my Honda snow...
I think I have narrowed may needs down and the BX seems to be the right fit. Anyone out there (hopefully in the southeast) planning on selling a well kept 2001 BX2200? I have and offer from a...
Hi,
I just purchased a BX2200 with the LA211 Loader and 60" mower. I live on the east coast and I also purchased a BX2750 Snowblower. I shopped around and one dealer told me that I need a...
I must sell my Bx2200, for both financial and storage reasons.I wanted to know if any one could give me a good idea what I should ask for it.My tractor is a 99 BX2200 with 167 hours,FEL,60 inch...
i'm sure this has been talked about; however, i just received my tiltmeter and want to put it on my bx2200. what have others done? There's no apparent first choice of a place to put it.
thanks,
Hi
How much of a slope will the BX2200 handle before it becomes unstable? I have several slopes which are about
30 degrees as well as some ditches which I would want to
mow. The ditches are...
Hi
I've read about the two types of tires which can be obtained with the BX2200. Most people seem to feel there is no real difference between them.
Is there a difference for plowing snow with a...
Hi
The specs on the BX2200 say the tractor has about 6 inches of clearance. I would like to use it on my woodlot. Are there larger tires which I could put on the BX2200 to get more ground...
Hi
Could someone point me in the right direction to find a dealer in Canada who will quote prices for this model? I would like to find a good price on a new BX2200 in New Brunswick, Nova Scotia...
I have a new BX2200 that suddenly has a problem shifting into neutral. If I turn the tractor off in either fast (rabbit) or slow (turtle) when I try to put it in neutral again to start the engine...
I am looking to get a BX model and there is a BX1800 at the local dealer that I might get at $7900.00 (tractor only)Is that a good price ?
And also I dont see many discussions on the BX1800 . Is...
BX2200 4\' ROTARY CUTTER??
Hi All,
I am looking at buying a 4' rotary cutter (King Kutter)for my BX2200. I know the manual shows a limit of 42" for a rotary cutter. Unfortunately, these...
Does anyone have any experience with a BX2200 using a 3point 1 or two bottom plow. I need to turn up some ground and am reluctant (too poor) to spend the money on a rototiller. it seems to me i...
Does anyone have any experience with a BX2200 using a 3point 1 or two bottom plow. I need to turn up some ground and am reluctant (too poor) to spend the money on a rototiller. it seems to me i...
My new 2200 was delivered the other day. I can’t believe the quality of the cut (mower) as well as the quality of the BX in general. I can see why people are buying these things. The FEL is a joy...
Just purchased my first Kubota today, a sweet BX2200 with 60"mmm and FEL, will be delivered on Tuesday, 9_11. Would like your opinion on the tires I need since I wish to use the loader or a blade...
My hydrolic lines on my bx2200 running from the transmission to the loader vibrate making more noise than the engine does. The dealer must of noticed it also. They installed a hose clamp around...
I have 7.68 acres. It is pretty much flat other than the road ditch and ditch that runs through the property. I hope to eventually get to the point where I'm finish mowing everything. Right now...
Everytime I go to use my BX2200 for mowing with belly mower I have this ach in the gut as I have to partially engage the PTO clutch to get things spinning a little and then grind the PTO selector...
my dealer let me demo the bx2200 over the labor day weekend and i put about 17 hours on it. afterwards, i feel like it's the machine i need. i have 27 steep acres that i'm taming a little bit and...
The best route from my back yard to my side yard is right over my 1000 gallon septic tank, buried just 10 inches below the surface. I know they're not designed or built as heavy-duty structures...
Got it yesterday - only got a few minutes on it last night, long enough to try the FEL and mower.
Took the mower off today (nothing to mow this year ) and put three hours on re-working my gravel...
Looking for my first tractor. I have 10 acres here in MN. 3/4 AC is lawn the rest is solid woods. 220' paved driveway. Seriously considering the BX2200 with FEL, 60" or 54" MMM and a rear blade...
I have looked all over for a post hole digger to fit on my BX2200. Here's photographic proof that they do exist. This is a Worksaver model 300 w/ 30" auger. A 12" extension is sitting on the...
How well does the mulching deck work for the BX2200?
Getting ready to place my order and I sure like the idea of a mulching deck. All my dealer says is "it's expemnsive... about $300 and I...
BX2200 60\" MMM GREASING
I just finished greasing my mower deck...how do you know when enough grease has been pumped into the grease nipples on the spindle shaft and belt tension pulleys. I did...
Hello,
First I'm french and sorry for my bad English :(
Okay... I would like to know the best rules for choose a tiller for a BX2200. My soil is a little heavy but without lot of stones.
So what...
I've decided to buy a BX2200, but I don't know what snowblower to buy. I have a Bed and Breakfast in upstate New York, and I need to be a able to do a good job of moving snow, but it also has to...
I want to say thank you to this group. The information I gathered from reading these posts helped me immensely. I just received my new Kubota BX220D this morning. I paid $9800 for the tractor...
Does anyone out there have the 60" deck with the mulching kit. I'm thinking about one for my BX2200. I like the way it cuts but the clippings that it lays out need to be mulched. I'm cutting...
Hi Guys, 1st time posing on this great site. I've gained alot of insight regarding the purchase of my new garden tractor. I've ordered a new BX2200 with the FEL, 60" MMM grill guard and the 4-way...
BX has so much power that you dont notice the parking brake is on sure would be nice if they had put a dash brake light on it. Just wonder if i am the only one who keeps forgetten the brakes are on .
Wondering how many have encountered this problem. The top link on my tractor has always been very difficult to adjust, with or without the box blade on. Now, after I adjusted the link out (in a...
Just wondering, with all the past problems i've heard regarding 3 pt hitch spread, tight fits, ect... Whats the best brush hog to get for compatibility with the BX? Any other implements that...
when i turn on my lights one of my gauge lights is a blueish color and the other one is a regular light. wondering is all of them like this or is it just mine.
Still enjoying my Kubota.
I've just started - with my schedule and the local dealer's hours, I can only get to one or two this week. But - I just hit my first choice, a long-established family enterprise, and got this as a...
BX2200 60\'\' mowing rpms
I noticed for the first 50 hours your not suppose to run the engine at max speed which seems ok for my lawn but was wondering do most of you run at max under normal lawn...
just bought one last week and really love it. I was looking at the owners manual and read that when you replace the front axle oil you use Kubota Super UDT fluid or Sae 80 or Sae 90 gear oil...
In about 1 month we will be moving from 1/2 acre to 15 acres (yes!). I have been reading & studying on various tractors, but couldn't make a decision, because I was unsure just what I'd be using...
I've got about five acres of hardwoods, between 35 and 100 years old, with the house on about 3/4 acre. I don't intend to clear more trees, but I expect to reduce about another 3/4 acre to...
Tons of good info on this site! I am in the process of buying a BX2200. I will be using it mainly for keeping 4-5 acres cut to 6 inchs high or so (no need for golf course cut here) and...
I Just got my BX2200 and noticed when I had my box blade on for extra weight, as I was doing front end loader work, the box blade would drop very slowly even though I didn't move the lever to drop...
Around here we keep track of how many days until it snows. It is now between 90-100 day based on averages.
My old JD 316 has a removeable Hard top/front/rear cab with framed canvas sides. This is...
Does anyone have experience using a snow plow blade on their BX 2200?
Would you suggest chains, wheel weights, and/or tractor weights to do the job more efficiently.
Some parts of my asphalt...
You just know its going to happen sooner or later, my BX disapointed me today.
I have a 2 ton 1962 chevy ex-grain truck with a dump box.
I was digging for some gravel on our property hoping to...
I just bought a BX2200 with FEL & 60" mow deck. I need to haul it to my cabin 80 miles away. Will my 2 place aluminum snowmobile trailer handle the weight or do I need to buy a new trailer.
Does anyone know any pros/cons between the TG2754 54" snow blade with manual angling vs. the BX2763 60" blade with hydraulic angling.
I have to choose between the two. I live in NJ and have...
Well I was under the hood the other day just looking aound when I notices some stickers on the engine.
Then i went around to the other side and ther was this sticker.
Now I totally confused. The...
I am looking at a BX2200 with a loader and 60" mow deck. I have been quoted prices from $11,650 from dealers 800 miles away my local dealer will sell it to me for $12,100 is this a good deal? Is...
We are about to start building our new home on 2.5 acres. It is somewhat sloping and no landscaping in place. I currently own 2 acres and have been using a 2 year old JD LX277 w/48deck. I have...
I have a new BX2200 with an RCK54-22BX MMM.
When in the raised position with the Cutting Height Control Dial set at Top, the right and left Mower Rear Links do not stop at the same distance from...
I have a new BX2200. When it arrived I checked the Transmission Fluid level with the engine off. There was not enough in the system to reach the bottom of the Dipstick (the FEL would operate). I...
I have a new BX2200. On the first day I had it the Cutting Height Control Dial stripped out and will not turn the half-round post.
Questions: Has this happened to anyone else? Should I have been...
I have a new BX2200 with an RCK54-22BX Mid Mount Mower.
The Front Link length setting is not 48mm from the bottom of the bottom locknut to the end of the threaded post as described in the...
I am curious how these two units stack up against each other as grass cutting machines. I had narrowed my search to the BX, but this ZD thing may be a more versaltile grass cutter. My questions...
Not much I can do about it now, but I'm just wondering what ya'll think about the deal I stuck in Northern Vermont:
BX2200, 60" mower deck and LA211 loader (bar tires) for $12,390.
I added a...
I am down to two Kubotas. I like the BX2200, but the loader seems a bit "wimpy" and 22hp also seems light when I had a 16HP garden tractor, so I am looking at the B2910.
The B2910 seems nice...
Just wondering if ya'll consider digging dirt (till the wheels spin) abuse when done within the first 15 hours or so of a BX's life? I really want to do some digging and actually have done a...
My neighbour saw and then used my BX2200 the other day. He was extremely impressed as he currently owns a JD 322. Today he shows up telling me he went to the dealer and looked at the B7500 and...
I just bought my BX2200 from Sound Tractor in Everett, WA. I got the FEL and a Grill Bumper, plus a 54" Deck Mower with Mulching Kit. Before buying I examined the NH TC21D and the JD 4100. I am...
The starter packed it in again for the third time and as you can see by the picture, You have to pull the blankty blank motor to service the starter. This took about 4 hours and about 1/8 inch of...
Well you know the question, do you have the answers.
My list of equipment includes loader, 50 tiller, 48 snowblower, 60 mower and soon to arrive 48 box blade.
After wrestling with the tiller, for...
Well I have just over 7.5 hours and I'v cut 3 acres of grass. Removed two large bumps( about 6yds each) in an otherwise nice flat lawn, Used the bump fill to start a new driveway approach, Dug up...
BX2200 won\'t stop rolliing forward/back. Picture
If your BX keeps drifitng forward or backward when you get off without putting it in neutral, Here is the fix. See the picture attached. lossen...
I just got a new Kubota BX2200.
Can you tell me how your 3-pt hitch operation lever functions.
The manual says when you set it to raise or lower it automatically returns to the neutral position...
Well originally the machine was to be here on Saturday the
16th but I received a call during the week to see if they
could come out on Friday the 15th. Well hell yes come on
out.
They were...
Hi all. This is my first post although I've been lurking for several weeks now. I'm finally ready to buy, but recently ran into a new B1700 left over from last year. I was at the dealer looking at...
Is there anyway I can get an after market/dealer installed cruise control for either one of these models or can I just jamm a stick betwen the seat and the pedal like they do in the movies when...
can not make up my mind. 9950.00 for 7500dt with 54" mower deck or 9500.00 for bx2200 with 60" mower deck. will use the tractor to move boats at boat shop and cut lawn at shop and home. i am kinda...
I live in SW Michigan I can get a new BX2200 for $8,995 and a FEL for $2300. I feel the tractor is a fair price but the FEL is kinda high. Any input would be greatly appreciated.
Just a word of thanks and appreciation to all the Bota nuts of this site. You all have helped me tremendously during the selection process. I now can look forward in interacting with all of you...
I am about ready buy a BX2200 w/ FEL but still haven't decided on what mower to get. I have reviewed all of the posts regarding mower choices but I still have some questions. I think I have...
I have a dilemma -- 75% of the time I will be cutting 1.5 acres of Lawn (soft ground so I am thinking Turfs for this application) however the other 25% is snow removal w/ Front blade and the odd...
I really like the BX2200, but I'm leaning towards the B7500 because of ground clearance. I have a 7 acre horse farm on flat land except for certain areas in between pastures and where the horses...
Am I crazy?
I want a BX2200 because it is totally rugged and deisel.
I do not intend to utilize the fel capability.
I am only mowing 3/4 an acre.
I like the Power steering, the metal hood (what...
New BX2200 - It\'s amazing what it can do!
I finally have my new BX2200 and, after only 5 hours use, can't believe what I've accomplished!
At this rate, I'm going to have all my (and my...
My buddy who has a 2200 came over and tried to borrow my Joh Deere 31B Post Hole Digger. When we got it hooked up, it couldn't lift up high enough to get the bottom of the auger off the ground...
I have a BX2200 that runs for about 5 minutes and then dies, let it sit for awhile and then it restarts. I already changed the two fuel filters, any other ideas? Also I find the hydro pedal to...
What a great site. After a short time looking into it ( I am normally not this impulsive, but my grass is growing fast fast fast, and I am tired of the potholes in my gravell driveway)I bought a...
I am considering the BX2200 has anyone had anything they did not like about it? Or if you could change something what would it be and why? How about the turff tires vs bar tires? I'm looking at...
Well, here I am very close to making the plunge into the BX world. I am a little unsettled on the attachments, however. I am going with the BX2200 w/ FEL and 60 inch however I would like to get...
Well, here I am very close to making the plunge into the BX world. I am a little unsettled on the attachments, however. I am going with the BX2200 w/ FEL and 60 inch however I would like to get...
Have 107 hrs. in six months blowing snow. Leaking fuel tank, dealer fixed. Loose hose clamp from rad to block caused loss of antifreeze fluid, dealer fixed. Glow plug failure, along with...
Owners of these tractors, and owners of B2400/2100...etc., please share your experience with non-position control tractors. I am having trouble "pulling the trigger" on a Kubota without position...
hey all,
just realized i really havent announced that i got my bx on the 6th. i have 14 hrs on it now and have put my tail between my legs on sunday when i cut thru the invisible fence wire in 4...
I am considering a BX2200 to help me care for my hilly five acres of Oregon paradise. I, however, have one question: How do you move these things from place to place? Will they fit in a...
looking to buy small tractor to move boats at a boat shop\ my local dealer is trying to sell me a bx1800\ he has a b7300 hsd that is last years model that he will sell for the same price is there...
I am considering the purchase of a BX2200 and am a paraplegic (Fell out a tree 17 years ago). Anyhow I have no use of legs so I need to run everything with my hands. Currently I have Kubota...
I am new to TBN. I took delivery of my new BX2200 yesterday. I got the FEL, turfs, 60" mower and 5' rear blade, plus some smaller accessories(grill guard, hooks, etc.). I love it! My exposure to...
I read a post under "Tractor Projects" where someone used a potato plow (aka middle buster) to dig a trench for burying conduit. It sounded like a good idea to me and I decided to give it a try...
Well, I’ve narrowed my choice down to orange, the BX2200 or the B7500.
Now I know there has been volumes of discussion on this topic in the posts on this board, and I’ve also read Muhammad’s...
Here is the specifications (most of them anyway for all the B series Kubotas. Don't know why Kubota doesn't do this?
I got all this information from TractorSmart, so if it's wrong, I either...
I have been studying the weights of the various tractors, and it looks like the bx2200 is within a hundred pounds or so of the b2410. Any reason why a person couldn't make up this difference with...
I'm currently putting a package together and my dealer thinks that a pull behind mower would be better for my needs.I will be mowing a 8 acre hay field, our lawns around the house,and some semi...
I recently bought 2.5 acres of land. There are no trees or hills on the property. The land is flat. I primarily will be using my BX for mowing the entire property. I'll do other odd jobs using...
When I purchased my BX2200 over 1 year ago, I decided to get the 54" mower deck because it was 40 lbs lighter. At the time, I had just herniated my L4-L5 disc in my lower back and was afraid of...
From what I've seen in my short time here at TBN, there are a number of folks out there who are ready to purchase a BX2200, but need to be absolutely sure that when they "dive in" there aren't...
I am looking at purchasing a BX2200. Originally I was going to purchase a garden tractor, but when I started doing a little research, I realized that was not the way to go.
I own approximatley...
Hi All,
First time post and I've been learning from this site for about 2 weeks now. I'm very interested in both of these tractors but still don't know which one will suit my needs and desires...
I figured I start a new thread as my emphasis is now on the bagger.
Thanks for all of the previous input on the trailer. I think I'll
hold off and get a tandem, or just rent one when I need to...
I want to buy a Tractor to do the following: Mow Lawn, Blow Snow and Till Garden. The majority of the time will be spent mowing lawn. I have just started studying tractors and I keep coming back...
hey all,
does anyone know the expected average engine life for a bx2200? i have had my mind set on the b7500 until lately when i began reading all the bx2200 posts. yesterday i went to the dealer...
Well, spring is approaching, there will be many landscaping and lawn care projects lined up, and I just sold my old house, so I have a few extra nickels burning a hole in my pocket. Many thoughts...
hey all,
even though i have been biased towards getting a b7500, im not totally against the bx2200. i was wondering how all you operators of the bx feel about some things:
how do the baby ags...
My BX2200 turned 101hrs. I would like to replace the air filter!
The Nelson air filter number does not cross over to other filter brands at the Parts stores. Does anyone have a part no./Brand...
Has anyone had direct experience with tillers for the BX? My dealer is recommending that I stay with very narrow ones, such as 36" and less. Can I go with larger? It seems that it should be...
Hi guys: Here is a question for all you owners. I was looking at a new BX2200 with mower and loader. Is the loader anygood for doing home projects (ie. snow removal, digging a little, lifting...
Hi guys: I found a BX2200, 4WD with a 54" belly mower for $9,995 with 24 hours on it (from a dealer). Is that a good dealer or should I look around for a better deal? It seemed like an okay deal...
Has any one thought of turbocharing there bx2200 or any other kubota or small diesel engines. there are turbocharges avalible for small displacement engines. I wounder if this has been done...
My BX2200 has 18hr. on it and the fuel gauge only goes to about 1/2 full and its empty. I found this out after it ran out of fuel. Has anyone else had any problems with this.
The steering cylinder is in front of the front axle on my new BX. On either end of this cylinder are rubber boots that attach to the cylinder and the steering shaft slides through. They seem to...
I am trying to decide which tractor to buy between a new BX2200, 4WD with a 60" belly mower for $10,500 or a used NH 1530 (now TC25D) with super steer, 4WD and 80 hours of use for $12,750. Once a...
First, a big "Thank you" to the group for the invaluable info you've unknowingly given me as I lurked.
Last week i took delivery on a new BX-2200 with 60" belly mower, the 211 FEL, and a Woods...
Please helpl me decide, I just bought 5 ac. with about 1 ac. of it cleared. The rest of it has some alder trees with some underbrush. I want to clear out the underbrush and put in my new yard. So...
We have just had around 20" of snow here in mich. with 2 to 3 foot drifts in the past week.My bx2200 handle it with out a problem .I used my FEL to clear and move the snow from my 100 foot...
First let me say that this is *the* premier tractor site and hats off to Muhammad and also to Bird and Wen and
others who have provided a free education to this newbie.
I will shortly have need...
Does everybody's BX2200 fuel pump make a noise like a starter solenoid when the battery is too weak, as soon as you put the key in the on position? This is my first non-gas engine and I just want...
Earlier this week, I had an opportunity to test a BX2200 at a local dealer. I had a few problems during the test. Since the salesman that was with me was not very familiar with the BX2200, there...
I have a BX2200 with 34 hours on it and was operating the pto's the other day. I didn't have anything running off of the pto's. There was a loud clacking noise coming from both the mid and rear...
After 65 hrs of use, the tractor developed a fuel leak. There is a container between the main fuel line from the tank and the fuel filter. The fuel lines are not leaking but the container...
I thought maybe we should have a picture of one of our riding wheelbarrows posted. Here's mine. I usually don't have much to smile about but this was taken the day the the FEL was put on and I...
I AM INTERESTED IN PURCHASING A BX2200 W/ 60" MOWER DECK. I AM ALSO REVIEWING ADDING A LA211 LOADER , BX2750 SNOW BLOWER AND A BUSH HOG RTS40-04 ROTO TILLER W/SLIP CLUTCH HAS ANYONE HAD ANY...
So, today I decided not to be a professional programmer (at least for the day.) The landscapers showed up today, ready to redo my property. They had their shovels and rakes and plants and...
When I went in for parts to do my 50 hour service the dealer told me that all I needed to do is change oil & filter, fuel filter, air filter and tranny filter. This conflicts with the manual, but...
I have 9 hours on a BX2200. It has been to dealer 3 times. The first time, the small diesel tank under the left frame was leaking. The dealer replaced the tank with a repaired tank and advised...
In June I purchased a BX2200 and am happy with then tractor and performance. In the owners manual, they talk about RPM speed with different attachments. There is no tach on the BX. Does anyone...
In mid-July my BX began leaking diesel. My dealer replaced a plastic part under the tank. He said the part had several hoses that went into it. He also said that he had heard that there was a...
I AM ABOUT TO REGISTER 50 HRS ON MY BX2200 AND I WILL BE DOING THE MAINTENANCE MYSELF .OTHER THAN FOLLOWING THE OWNERS MANUAL DOES ANYONE HAVE ANY ADDITIONAL ITEMS THAT I SHOULD CHECK OR...
I read in the paper last night about some nut who is in the process of driving his brand new Kubota BX2200 all around the country. He hopes to make it into every state and estimates his trip to...
I have two questions for the board........
1- Does anybody have part numbers for oil filter and transmission filter other than Kobota? ex. Fram etc. or is it not recommended to use them. On my...
I FINALLY RECIEVED MY BX2200 I HAVE ONLY BEEN ABLE TO PUT ON 2 HOURS SO FAR ,BUT I CAN TELL THIS IS A REALLY NICE MACHINE AND SHOULD BE ABLE TO MEET ANY HOME OWNERS NEEDS.IT SURE IS NICE TO CUT A...
i just purchased my bx2200 finally,and i would like to know if i should purchase a box blade or a pulverizer for doing my yard grading and preperation for seeding.i have 1.5 acres.
I now have 22 hours on my BX2200 and the biggest item that disappoints me is the seat. The seat is very uncomfortable and it moves back and forth about a 1/4". Have any of you BX owners figured...
This is in response to Gordon's last post on the tail end of the 4 in 1 thread. I thought I'd start with a new thread.
The hoe on the L35 is quite the piece of equipment. A "typical" Kubota hoe...
I'm trying to buy a BX2200. This year! I previously sent a message about buying from a distant dealer. Experienced forum members said that shouldn't be a problem.
Can anyone e-mail me directly...
I am considering buying either a NH TC 18 or Kubota BX2200. Both have front loaders and mid mower decks. The TC 18 appears to have more capacity on the loader and rear PTO than the BX2200 and both...
I went to my dealer to pick up my finish mower that they had to fix and decided to take close look at the BX2200. I had mentioned last week that it was awful small for $10K. I take all of that...
I have an empty slot to the rear of my 3pt lift on my BX. It has a picture of a hydraulic cylinder, extended and retracted. Is this for one of the fascinating but unknown options or is it just a...
I think the 3pt on the BX2200 will actually work as intended if I can get the link balls all loose so maximum possible movement can be obtained without the come-along!
What do you guys recommend...
Have any of you BX2200 owners observed sounds that might be out of the ordinary? Specifically, when turning the engine off, the engine hood and cover rattle quite virgorously. I've checked the...
Does anyone have inside information regarding shipments of the BX 2200 tractors in the Virginia area? Is the crunch still on? I have been on the waiting list going on the 5th week.........
I have 10 acres and am looking for a tractor for Lawn care, snow plowing (only a blade), box scraper for makeing a trail around the property, sand rake for the riding arena, post hole digger for...
I live in Massachusetts and want to use this tractor for grading my 2acres of land, plowing in the winter, cutting grass in the summer and other misc tasks. What should I do for snow plowing. Do...
We are in the market for a new tractor. We have looked at the John Deere 425 (With atachments ie PTO, 3 PT hitch) and we have looked at the John Deere 4100 and are comparing it to the BX2200. My...
How does the bx2200 handle tilling, rotary cutting and blade work. I am thinking of buying one. Also should I be worried about the 3pt. lift power of bx2200? I live on 10acres with 3 acres yard...
Hi Guys - I am thinking seriously about a BX1800/2200 or a B7300HSD. One of the Web sites mentioned that the B7300 was good for commercial use or "even by homeowners". Well, I am one of those...